The impact of the Canadian Standardized Test of Fitness and of health counselling on health attitudes and behaviour

The purpose of this research study was to determine whether or not the use of a single day of Personal Wellness Evaluations would be meaningful enough to change the attitudes of participants toward adopting a healthier lifestyle, or if it was necessary to include regular planned health counselling alon-g with the Personal Wellness Evaluations in order to'observe changes in beliefs, attitudes and behaviours toward active living and the adoption of a healthier lifestyle. Attitudes and behaviours toward physical fitness and healthy lifestyle choices were assessed through a questionnaire composed of the following instruments: Fishbein and Ajzen Attitude and Behaviour Questionnaire, Leisure Behaviour Questionnaire, Ten Centimeter Bipolar Health Continuum, Neugarten Life Satisfaction Assessment, Job Description Index, Selected questions from the Ontario Health Survey, and the Symptom Reporting Questionnaire. Physical fitness evaluation consisted of the Canadian Standardized Test of Fitness, measures of blood pressure, and total cholesterol. The participants were divided into three groups: Group 1- CSTF & health counselling, Group 2- CSTF only, and Group 3- a control group. All three groups received the questionnaire both at the beginning and at the end of the study. Group 1 and Group 2 also participated in fitness testing at these same times, with a three-month time interval between test times. Group 1 also received weekly one-hour health education sessions during the three months between fitness testing. While there were some differences found between the three groups in this study, the results of this study suggested that this three-month workplace wellness program had no impact on the participants' attitudes and behaviours toward health and physical activity. There were no significant differences in the physical fitness measures between Group 1 and Group 2 , nor in the participants' questionnaire responses. These results may be due to the participants' lack of compliance to this wellness program. Employees who 11 participate in a workplace weIlness program must be self-motivated to comply with the program in order to receive the full benefits the program has to offer. Some participants in this study did not have the internal motivation necessary to remain in the study for the three-month period. Future research may consider implementing a workplace wellness program for a longer duration as well as incorporating a specific physical fitness program for the participants to follow. An exercise program could improve the participants' physical fitness, while the health counselling would give the individuals the health education necessary to lead a healthy lifestyle.

A tool for standardized collector performance calculations including PVT

A tool for standardized calculation of solar collector performance has been developed in cooperation between SP Technical Research Institute of Sweden, DTU Denmark and SERC Dalarna University. The tool is designed to calculate the annual performance of solar collectors at representative locations in Europe. The collector parameters used as input in the tool are compiled from tests according to EN12975, without any intermediate conversions. The main target group for this tool is test institutes and certification bodies that are intended to use it for conversion of collector model parameters (derived from performance tests) into a more user friendly quantity: the annual energy output. The energy output presented in the tool is expressed as kWh per collector module. A simplified treatment of performance for PVT collectors is added based on the assumption that the thermal part of the PVT collector can be tested and modeled as a thermal collector, when the PV electric part is active with an MPP tracker in operation. The thermal collector parameters from this operation mode are used for the PVT calculations. © 2012 The Authors.

Facebook3d

INTRODUCTION With the advent of Web 2.0, social networking websites like Facebook, MySpace and LinkedIn have become hugely popular. According to (Nilsen, 2009), social networking websites have global1 figures of almost 250 millions unique users among the top five2, with the time people spend on those networks increasing 63% between 2007 and 2008. Facebook alone saw a massive growth of 566% in number of minutes in the same period of time. Furthermore their appeal is clear, they enable users to easily form persistent networks of friends with whom they can interact and share content. Users then use those networks to keep in touch with their current friends and to reconnect with old friends. However, online social network services have rapidly evolved into highly complex systems which contain a large amount of personally salient information derived from large networks of friends. Since that information varies from simple links to music, photos and videos, users not only have to deal with the huge amount of data generated by them and their friends but also with the fact that it‟s composed of many different media forms. Users are presented with increasing challenges, especially as the number of friends on Facebook rises. An example of a problem is when a user performs a simple task like finding a specific friend in a group of 100 or more friends. In that case he would most likely have to go through several pages and make several clicks till he finds the one he is looking for. Another example is a user with more than 100 friends in which his friends make a status update or another action per day, resulting in 10 updates per hour to keep up. That is plausible, especially since the change in direction of Facebook to rival with Twitter, by encouraging users to update their status as they do on Twitter. As a result, to better present the web of information connected to a user the use of better visualizations is essential. The visualizations used nowadays on social networking sites haven‟t gone through major changes during their lifetimes. They have added more functionality and gave more tools to their users, but still the core of their visualization hasn‟t changed. The information is still presented in a flat way in lists/groups of text and images which can‟t show the extra connections pieces of information. Those extra connections can give new meaning and insights to the user, allowing him to more easily see if that content is important to him and the information related to it. However showing extra connections of information but still allowing the user to easily navigate through it and get the needed information with a quick glance is difficult. The use of color coding, clusters and shapes becomes then essential to attain that objective. But taking into consideration the advances in computer hardware in the last decade and the software platforms available today, there is the opportunity to take advantage of 3D. That opportunity comes in because we are at a phase were the hardware and the software available is ready for the use of 3D in the web. With the use of the extra dimension brought by 3D, visualizations can be constructed to show the content and its related information to the user at the same screen and in a clear way. Also it would allow a great deal of interactivity. Another opportunity to create better information‟s visualization presents itself in the form of the open APIs, specifically the ones made available by the social networking sites. Those APIs allow any developers to create their own applications or sites taking advantage of the huge amount of information there is on those networks. Specifically to this case, they open the door for the creation of new social network visualizations. Nevertheless, the third dimension is by itself not enough to create a better interface for a social networking website, there are some challenges to overcome. One of those challenges is to make the user understand what the system is doing during the interaction with the user. Even though that is important in 2D visualizations, it becomes essential in 3D due to the extra dimension. To overcome that challenge it‟s necessary the use of the principles of animations defined by the artists at Walt Disney Studios (Johnston, et al., 1995). By applying those principles in the development of the interface, the actions of the system in response to the user inputs became clear and understandable. Furthermore, a user study needs to be performed so the users‟ main goals and motivations, while navigating the social network, are revealed. Their goals and motivations are important in the construction of an interface that reflects the user expectations for the interface, but also helps in the development of appropriate metaphors. Those metaphors have an important role in the interface, because if correctly chosen they help the user understand the elements of the interface instead of making him memorize it. The last challenge is the use of 3D visualization on the web, since there have been several attempts to bring 3D into it, mainly with the various versions of VRML which were destined to failure due to the hardware limitations at the time. However, in the last couple of years there has been a movement to make the necessary tools to finally allow developers to use 3D in a useful way, using X3D or OpenGL but especially flash. This thesis argues that there is a need for a better social network visualization that shows all the dimensions of the information connected to the user and that allows him to move through it. But there are several characteristics the new visualization has to possess in order for it to present a real gain in usability to Facebook‟s users. The first quality is to have the friends at the core of its design, and the second to make use of the metaphor of circles of friends to separate users in groups taking into consideration the order of friendship. To achieve that several methods have to be used, from the use of 3D to get an extra dimension for presenting relevant information, to the use of direct manipulation to make the interface comprehensible, predictable and controllable. Moreover animation has to be use to make all the action on the screen perceptible to the user. Additionally, with the opportunity given by the 3D enabled hardware, the flash platform, through the use of the flash engine Papervision3D and the Facebook platform, all is in place to make the visualization possible. But even though it‟s all in place, there are challenges to overcome like making the system actions in 3D understandable to the user and creating correct metaphors that would allow the user to understand the information and options available to him. This thesis document is divided in six chapters, with Chapter 2 reviewing the literature relevant to the work described in this thesis. In Chapter 3 the design stage that resulted in the application presented in this thesis is described. In Chapter 4, the development stage, describing the architecture and the components that compose the application. In Chapter 5 the usability test process is explained and the results obtained through it are presented and analyzed. To finish, Chapter 6 presents the conclusions that were arrived in this thesis.

O uso de dois websites de compras on-line por usuários acima de 50 anos (older users): estudo de caso

Pós-graduação em Design - FAAC

Understanding Recent Developments in the Turkish Labor Market: Empirical Essays with a Gender Focus

This dissertation comprises three essays on the Turkish labor market. The first essay characterizes the distinctive characteristics of the Turkish labor market with the aim of understanding the factors lying behind its long-standing poor performance relative to its European counterparts. The analysis is based on a cross-country comparison among selected European Union countries. Among all the indicators of labor market flexibility, non-wage cost rigidities are regarded as one of the most important factors in slowing down employment creation in Turkey. The second essay focuses on an employment subsidy policy which introduces a reduction in non-wage costs through social security premium incentives granted to women and young men. Exploiting a difference-in-difference-in differences strategy, I evaluate the effectiveness of this policy in creating employment for the target group. The results, net of the recent crisis effect, suggest that the policy accounts for a 1.4% to 1.6% increase in the probability of being hired for women aged 30 to 34 above men of the same age group in the periods shortly after the announcement of the policy. In the third essay of the dissertation, I analyze the labor supply response of married women to their husbands' job losses (AWE). I empirically test the hypothesis of added worker effect for the global economic crisis of 2008 by relying on the Turkey context. Identification is achieved by exploiting the exogenous variation in the output of male-dominated sectors hard-hit by the crisis and the gender-segmentation that characterizes the Turkish labor market. Findings based on the instrumental variable approach suggest that the added worker effect explains up to 64% of the observed increase in female labor force participation in Turkey. The size of the effect depends on how long it takes for wives to adjust their labor supply to their husbands' job losses.

The physiological consequences of crib-biting in horses in response to an ACTH challenge test

Stereotypies are repetitive and relatively invariant patterns of behavior, which are observed in a wide range of species in captivity. Stereotypic behavior occurs when environmental demands produce a physiological response that, if sustained for an extended period, exceeds the natural physiological regulatory capacity of the organism, particularly in situations that include unpredictability and uncontrollability. One hypothesis is that stereotypic behavior functions to cope with stressful environments, but the existing evidence is contradictory. To address the coping hypothesis of stereotypies, we triggered physiological reactions in 22 horses affected by stereotypic behavior (crib-biters) and 21 non-crib-biters (controls), using an ACTH challenge test. Following administration of an ACTH injection, we measured saliva cortisol every 30min and heart rate (HR) continuously for a period of 3h. We did not find any differences in HR or HR variability between the two groups, but crib-biters (Group CB) had significantly higher cortisol responses than controls (Group C; mean±SD: CB, 5.84±2.62ng/ml, C, 4.76±3.04ng/ml). Moreover, crib-biters that did not perform the stereotypic behavior during the 3-hour test period (Group B) had significantly higher cortisol levels than controls, which was not the case of crib-biters showing stereotypic behavior (Group A) (B, 6.44±2.38ng/ml A, 5.58±2.69ng/ml). Our results suggest that crib-biting is a coping strategy that helps stereotypic individuals to reduce cortisol levels caused by stressful situations. We conclude that preventing stereotypic horses from crib-biting could be an inappropriate strategy to control this abnormal behavior, as it prevents individuals from coping with situations that they perceive as stressful.

Development and Test of a Neutron Imaging Setup at the PGAA Instrument at FRM II

We report on the developments of a neutron tomography setup at the instrument for prompt gamma-ray activation analysis (PGAA) at the Maier-Leibnitz Zentrum(MLZ). The recent developments are driven by the idea of combining the spatial information obtained with neutron tomography with the elemental information determined with PGAA, i.e. to further combine both techniques to an investigative technique called prompt gamma activation imaging (PGAI).At the PGAA instrument, a cold neutron flux of up to 6 x 1010 cm-2 s-1 (thermal equivalent) is available in the focus of an elliptically tapered neutron guide. In the reported experiments, the divergence of the neutron beam was investigated, the resolution of the installed detector system tested, and a proof-of-principle tomography experiment performed. In our study a formerly used camera box was upgraded with a better camera and an optical resolution of 8 line pairs/mm was achieved. The divergence of the neutron beam was measured by a systematic scan along the beam axis. Based on the acquired data, a neutron imaging setup with a L/D ratio of 200 was installed. The resolution of the setup was testedin combination with a gadolinium test target and different scintillator screens. The test target was irradiated at two positions to determine the maximum resolution and the resolution at the actual sample position. The performance of the installed tomography setup was demonstrated bya tomography experiment of an electric amplifier tube.

Performance assessment of a kinetically-powered network for herd localization

Developing a herd localization system capable to operate unattended in communication-challenged areas arises from the necessity of improving current systems in terms of cost, autonomy or any other facilities that a certain target group (or overall users) may demand. A network architecture of herd localization is proposed with its corresponding hardware and a methodology to assess performance in different operating conditions. The system is designed taking into account an eventual environmental impact hence most nodes are simple, cheap and kinetically powered from animal movements-neither batteries nor sophisticated processor chips are needed. Other network elements integrating GPS and batteries operate with selectable duty cycles, thus reducing maintenance duties. Equipment has been tested on Scandinavian reindeer in Lapland and its element modeling is integrated into a simulator to analyze such localization network applicability for different use cases. Performance indicators (detection frequency, localization accuracy and delay) are fitted to assess the overall performance; system relative costs are enclosed also for a range of deployments.

Análisis de usabilidad y aplicación de los resultados en el desarrollo de plataformas web

Este trabajo trata cómo se pueden aplicar las técnicas de análisis de usabilidad al desarrollo de plataformas web. Actualmente es común que los servicios sean ofrecidos mediante plataformas web para un grupo muy heterogéneo de personas. Por otra parte, los análisis de usabilidad son una herramienta muy útil para conocer cómo interactúan las personas con los ordenadores y mejorar el diseño de las aplicaciones. Realizar un buen diseño permite mejorar la experiencia de usuario, factor fundamental para el éxito de cualquier producto que requiera interacción con el usuario. A continuación se describen las diferentes fases de los test de usabilidad y se detalla cómo han sido aplicadas durante el desarrollo del proyecto. Finalmente, se presentarán los resultados obtenidos durante la evaluación de la plataforma y el análisis de los mismos indicando cómo han afectado al diseño de la plataforma. ---ABSTRACT---This document discusses how to apply usability test techniques over web platform development. Nowadays, it is common that services are offered through web platforms for a large group of heterogeneous people. Moreover, usability tests are a very useful tool to understand human-computer interaction and improve the design of the applications. A good design can improve user experience, which is essential for the success of any product that requires user interaction. The following pages describes the different phases of usability testing and detail how these have been applied during the development of the project. Finally, the results obtained during the platform evaluation are presented and analysed, explaining how they have affected the design of the platform.

A reliable and valid questionnaire was developed to measure computer vision syndrome at the workplace

Objectives: To design and validate a questionnaire to measure visual symptoms related to exposure to computers in the workplace. Study Design and Setting: Our computer vision syndrome questionnaire (CVS-Q) was based on a literature review and validated through discussion with experts and performance of a pretest, pilot test, and retest. Content validity was evaluated by occupational health, optometry, and ophthalmology experts. Rasch analysis was used in the psychometric evaluation of the questionnaire. Criterion validity was determined by calculating the sensitivity and specificity, receiver operator characteristic curve, and cutoff point. Testeretest repeatability was tested using the intraclass correlation coefficient (ICC) and concordance by Cohen’s kappa (k). Results: The CVS-Q was developed with wide consensus among experts and was well accepted by the target group. It assesses the frequency and intensity of 16 symptoms using a single rating scale (symptom severity) that fits the Rasch rating scale model well. The questionnaire has sensitivity and specificity over 70% and achieved good testeretest repeatability both for the scores obtained [ICC 5 0.802; 95% confidence interval (CI): 0.673, 0.884] and CVS classification (k 5 0.612; 95% CI: 0.384, 0.839). Conclusion: The CVS-Q has acceptable psychometric properties, making it a valid and reliable tool to control the visual health of computer workers, and can potentially be used in clinical trials and outcome research.

Web-based screening and brief intervention for hazardous drinking: a double-blind randomized controlled trial

Background Strong evidence exists for the efficacy of screening and brief intervention for reducing hazardous drinking. However, problems have been highlighted with respect to its implementation in health-care systems, not least of which is a reluctance of some doctors to discuss alcohol proactively with their patients. Aims To determine the efficacy of a novel web-based screening and brief intervention (e-SBI) to reduce hazardous drinking. Design A double-blind randomized controlled trial. Setting A university student health service. Participants A total of 16 7 students (17-26 years) were recruited in the reception area and completed a 3-minute web-based screen including the Alcohol Use Disorder Identifiation Test (AUDIT) questionnaire. Of these, 112 tested positive, and 104 (52 females) who consented to follow-up were included in the trial. Measurements Drinking frequency, typical occasion quantity, total volume, heavy episode frequency (females > 80 g ethanol, males > 120 g ethanol), number of personal problems, an academic problems score. Intervention Participants were randomized to 10-15 minutes of web-based assessment and personalized feedback on their drinking (intervention, n = 5 1) or to a leaflet-only control group (n = 5 3). Findings Mean baseline AUDIT scores for control and intervention groups were 16.6 (SD = 6.0) and 16.6 (SD = 5.7). At 6 weeks, participants receiving e-SBI reported significantly lower total consumption (geometric mean ratio = 0.74; 9 5 % confidence interval: 0.56-0.96), lower heavy episode frequency (0.63; 0.42-0.92) and fewer personal problems (0.70; 0.54-0.91). At 6 months personal problems remained lower (0.76; 0.60-0.97), although consumption did not differ significantly. At 6 months, academic problems were lower in the intervention group relative to controls (0.72; 0.51-1.02). Conclusions e-SBI reduced hazardous drinking among university students, to an extent similar to that found for practitioner-delivered brief interventions in the general population. e-SBI offers promise as a strategy to reduce alcohol-related harm in a way that is non-intrusive, appealing to the target group, and capable of being incorporated into primary care. Research is required to replicate the findings, to determine the duration of intervention effects, and to investigate the mechanisms by which the intervention operates.

'Occasional' and 'social' smokers: Potential target groups for smoking cessation campaigns?

Objective: To describe the characteristics [of self-described 'occasional' and 'social' Australian smokers. Design: Analysis of a national cross-sectional survey of smoking patterns, conducted in Australia in 2004. Setting and participants: Australian adults in 2004 who responded to a survey question about self-described smoking status. Main outcome measures: Demographic characteristics, patterns of alcohol and tobacco use, smoking cessation attempts in the past year, and interest in cessation. Results: Smokers who described themselves as 'occasional' and 'social' smokers comprised 29% of all smokers. A significant proportion of occasional and social smokers had been daily smokers, but the majority either believed that they had 'already quit' or had no intention of quitting smoking. Conclusions: Self-ascribed occasional and social smokers potentially represent an important target group for cessation. These types of smokers may be more resistant to public health messages regarding cessation because they do not view their smoking behaviour as presenting a high risk.

Study of effect on tensile stress test from distortion of fibre laser welded Ti6Al4V using FEA

Distortion is one type of defect in the weld, which is troublesome for some reasons, especially in thin plate welding. Distortion was found in fibre laser welding processing for 0.7mm thickness Ti6Al4V plate. The purpose of this paper is to understand and evaluate the effect of distortion on stress level by FEA and tensile test. A group of 0.7mm Ti6Al4V plates welded using continuous wave fibre laser. FEA models were established for fibre laser welded Ti6Al4V in abaqus 6.7. © (2011) Trans Tech Publications.

Dificuldades de aprendizagem do conteúdo de soluções: proposta de ensino contextualizada

The study of solutions is considered very important to chemist’s education because most of the chemical reactions occur in aqueous medium, being also required to understand other subject such as chemical changes, electrochemical and chemical balance. Nevertheless, it is noticed that many students indicate learning difficulties related to the content of solutions, how to pass among the macro-submicroscopic knowledge levels, and how to solve quantitative problems that demanding the establishment of a stoichiometric ratios. This thesis defended considers the use of contextualized teaching strategies about some subject associated to the study of solution, can foster student learning through reflection and understanding of their own difficulties, besides to provide motivation and active participation. The target group is formed by students of the undergraduate distance education with major in chemistry education of the Universidade Federal do Rio Grande do Norte (UFRN), and they were chosen because this education system is expanding and its learning difficulties publications number is reduced as well. Thus, the first methodological stage was to identify the student’s main learning difficulties associated to the study of solutions through literature sources. Next, using an adapted script of the Plano Nacional do Livro Didático para o Ensino Médio (PNLEM, Textbook National Plan for High School), the approach of the content of solutions printed in educational materials used by the target group was analyzed. Afterward, a teaching unit was planned in the last methodological stage and, finally, a new teaching unite was given with a sequence of contextualized activities such as video presentation, dialogued lecture, questionnaires application, exercises, and an experiment, where the target group’s main difficulties related to learning of solution were identified. The participants of the teaching unit activities had some learning difficulties in understand concepts of compound, ion, charge, entropy and solubility, as well as to identify the ion charge, interpret statements, decode tables, use the chemical language, perform mathematical calculations and use concentration units, similar results raised in the literature sources. In order to work on these difficulties, these students were encouraged to expose, question and test their ideas about the phenomenon under study, allowing learn from their mistakes and reflect on the organization strategy of scientific explanatory models they use. Therefore, activities and information about learning difficulties presented in this thesis need to be critical reflection object, because it can help both students in the process of acquiring knowledge about the content of solutions and professors in the planning of their lessons.

Usabilidade da Interface do Sistema Eletrônico de Editoração de Revistas: um estudo da revista BiblioCanto da UFRN

The electronic journals correspond publishing channels and dissemination of scientific information. Through them, users can spread their studies as well as developing new researches. One of the systems used for creation and e-journals management is the Electronic System for Journal Publishing (SEER), used in the construction of periodic portals, as well as the creation of magazines in isolation. In this purport, it is believed that the management systems and creation of e-journals should be developed (internally and externally) according to the needs of its users. In the case of internal development, some of these processes refer to the copyright registration and submission of articles, which, in turn, are relevant tasks in the editorial process. Thus, the proposed study, thematic Usability of scientific journals, aims to analyze the usability of the copyright registration process and submission of articles in the Electronic System for Journal Publishing through BiblioCanto magazine, part of the Electronic Journals Portal of the Federal University of Rio Grande do Norte (UFRN). For the realization of the research, two valuation techniques were used: the Usability Test with a total of twenty participants and the Cooperative Evaluation, with the same number of participants separated in four categories considered target audience of that magazine, namely: undergraduate students, graduate students, teachers and librarians. The results indicated that the two analyzed processes (copyright registration and submission of articles) need improvement. In the case of the registration process, the following needs are: signalizing of the conducting registration ambient; description and exclusion of requested information on the registration form. In the process of article submission, it is emphasized improvement of aspects: the early steps to submission, signaling of required fields, concise description of the steps, minimization and review of the steps. To this end, it is believed that in general idea the SEER partially meets the needs of its users regarding the usability of such software.