Sensorimotor and postural control factors associated with driving safety in a community-dwelling older driver population

Background. To establish whether sensorimotor function and balance are associated with on-road driving performance in older adults. Methods. The performance of 270 community-living adults aged 70–88 years recruited via the electoral roll was measured on a battery of peripheral sensation, strength, flexibility, reaction time, and balance tests and on a standardized measure of on-road driving performance. Results. Forty-seven participants (17.4%) were classified as unsafe based on their driving assessment. Unsafe driving was associated with reduced peripheral sensation, lower limb weakness, reduced neck range of motion, slow reaction time, and poor balance in univariate analyses. Multivariate logistic regression analysis identified poor vibration sensitivity, reduced quadriceps strength, and increased sway on a foam surface with eyes closed as significant and independent risk factors for unsafe driving. These variables classified participants into safe and unsafe drivers with a sensitivity of 74% and specificity of 70%. Conclusions. A number of sensorimotor and balance measures were associated with driver safety and the multivariate model comprising measures of sensation, strength, and balance was highly predictive of unsafe driving in this sample. These findings highlight important determinants of driver safety and may assist in developing efficacious driver safety strategies for older drivers.

On-road rapid identification of high-polluting transport buses

Exhaust emissions from motor vehicles vary widely and depend on factors such as engine operating conditions, fuel, age, mileage and service history. A method has been devised to rapidly identify high-polluting vehicles as they travel on the road. The method is able to monitor emissions from a large number of vehicles in a short time and avoids the need to conduct expensive and time consuming tests on chassis dynamometers. A sample of the exhaust plume is captured as each vehicle passes a roadside monitoring station and the pollutant emission factors are calculated from the measured concentrations using carbon dioxide as a tracer. Although, similar methods have been used to monitor soot and gaseous mass emissions, to-date it has not been used to monitor particle number emissions from a large fleet of vehicles. This is particularly important as epidemiological studies have shown that particle number concentration is an important parameter in determining adverse health effects. The method was applied to measurements of particle number emissions from individual buses in the Brisbane City Council diesel fleet operating on the South-East Busway. Results indicate that the particle number emission factors are gamma- distributed, with a high proportion of the emissions being emitted by a small percentage of the buses. Although most of the high-emitters are the oldest buses in the fleet, there are clear exceptions, with some newer buses emitting as much. We attribute this to their recent service history, particularly pertaining to improper tuning of the engines. We recommend that a targeted correction program would be a highly effective measure in mitigating urban environmental pollution.

The perspectives of older drivers on the impact of feedback on their driving behaviours : a qualitative study

Self-regulation is a coping strategy that allows older drivers to drive safely for longer. Self-regulation depends largely on the ability of drivers to evaluate their own driving. Therefore the success of self-regulation, in terms of driving safety, is influenced by the ability of older drivers to have insight into their declining driving performance. In addition, previous studies suggest that providing feedback to older adults regarding their driving skills may lead them to change their driving behaviour. However, little is currently known about the impact of feedback on older drivers’ self-awareness and their subsequent driving regulatory behaviour. This study explored the process of self-regulation and driving cessation among older drivers using the PAPM as a framework. It also investigated older adults’ perceptions and opinions about receiving feedback in regards to their driving abilities. Qualitative focus groups with 27 participants aged 70 years or more were conducted. Thematic analysis resulted in the development of five main themes; the meaning of driving, changes in driving pattern, feedback, the planning process, and solutions. The analysis also resulted in an initial model of driving self-regulation among older drivers that is informed by the current research and the Precaution Adoption Process Model as the theoretical framework. It identifies a number of social, personal, and environmental factors that can either facilitate or hinder people’s transition between stages of change. The findings from this study suggest that further elaboration of the PAPM is needed to take into account the role of insight and feedback on the process of self-regulation among older drivers.

The on-road experiences and awareness of sleepiness in a sample of Australian highway drivers: A roadside driver sleepiness study

Objective Driver sleepiness contributes substantially to road crash incidents. Simulator and on-road studies clearly reveal an impairing effect from sleepiness on driving ability. However, the degree to which drivers appreciate the dangerousness of driving while sleepy is somewhat unclear. This study sought to determine drivers’ on-road experiences of sleepiness, their prior sleep habits, and personal awareness of the signs of sleepiness. Methods Participants were a random selection of 92 drivers travelling on a major highway in the state of Queensland, Australia, who were stopped by police as part of routine drink driving operations. Participants completed a brief questionnaire that included demographic information, sleepy driving experiences (signs of sleepiness and on-road experiences of sleepiness), and prior sleep habits. A modified version of the Karolinska Sleepiness Scale (KSS) was used to assess subjective sleepiness in the 15 minutes prior to being stopped by police. Results Participants rating of subjective sleepiness were quite low, with 90% reporting being alert to extremely alert on the KSS. Participants were reasonably aware of the signs of sleepiness, with many signs of sleepiness associated with on-road experiences of sleepiness. Additionally, the number of hours spent driving was positively correlated with the drivers’ level of sleep debt. Conclusions The results suggest the participants had moderate experience of driving while sleepy and many were aware of the signs of sleepiness. The relationship between driving long distances and increased sleep debt is a concern for road safety – increased education regarding the dangers of sleepy driving seems warranted.

Blur, eye movements and performance on a driving visual recognition slide test

Purpose Optical blur and ageing are known to affect driving performance but their effects on drivers' eye movements are poorly understood. This study examined the effects of optical blur and age on eye movement patterns and performance on the DriveSafe slide recognition test which is purported to predict fitness to drive. Methods Twenty young (27.1 ± 4.6 years) and 20 older (73.3 ± 5.7 years) visually normal drivers performed the DriveSafe under two visual conditions: best-corrected vision and with +2.00 DS blur. The DriveSafe is a Visual Recognition Slide Test that consists of brief presentations of static, real-world driving scenes containing different road users (pedestrians, bicycles and vehicles). Participants reported the types, relative positions and direction of travel of the road users in each image; the score was the number of correctly reported items (maximum score of 128). Eye movements were recorded while participants performed the DriveSafe test using a Tobii TX300 eye tracking system. Results There was a significant main effect of blur on DriveSafe scores (best-corrected: 114.9 vs blur: 93.2; p < 0.001). There was also a significant age and blur interaction on the DriveSafe scores (p < 0.001) such that the young drivers were more negatively affected by blur than the older drivers (reductions of 22% and 13% respectively; p < 0.001): with best-corrected vision, the young drivers performed better than the older drivers (DriveSafe scores: 118.4 vs 111.5; p = 0.001), while with blur, the young drivers performed worse than the older drivers (88.6 vs 95.9; p = 0.009). For the eye movement patterns, blur significantly reduced the number of fixations on road users (best-corrected: 5.1 vs blur: 4.5; p < 0.001), fixation duration on road users (2.0 s vs 1.8 s; p < 0.001) and saccade amplitudes (7.4° vs 6.7°; p < 0.001). A main effect of age on eye movements was also found where older drivers made smaller saccades than the young drivers (6.7° vs 7.4°; p < 0.001). Conclusions Blur reduced DriveSafe scores for both age groups and this effect was greater for the young drivers. The decrease in number of fixations and fixation duration on road users, as well as the reduction in saccade amplitudes under the blurred condition, highlight the difficulty experienced in performing the task in the presence of optical blur, which suggests that uncorrected refractive errors may have a detrimental impact on aspects of driving performance.

Social influences on risky driving behaviours among young drivers in Oman

Young drivers represent approximately 20% of the Omani population, yet account for over one third of crash injuries and fatalities on Oman's roads. Internationally, research has demonstrated that social influences play an important role within young driver safety, however, there is little research examining this within Arab gulf countries. This study sought to explore young driver behaviour using Akers' social learning theory. A self-report survey was conducted by 1319 (72.9% male and 27.1% female) young drivers aged 17-25 years. A hierarchical regression model was used to investigate the contribution of social learning variables (norms and behaviour of significant others, personal attitudes towards risky behaviour, imitation of significant others, beliefs about the rewards and punishments offered by risky behaviour), socio-demographic characteristics (age and gender), driving experience (initial training, time driving and previous driving without supervision) and sensitivity to rewards and punishments upon the self-reported risky driving behaviours of young drivers. It was found that 39.6% of the young drivers reported that they have been involved in at least one crash since the issuance of their driving licence and they were considered ‘at fault’ in 60.7% of these crashes. The hierarchical multiple regression models revealed that socio-demographic characteristics and driving experience alone explained 14.2% of the variance in risky driving behaviour. By introducing social learning factors into the model a further 37.0% of variance was explained. Finally, 7.9% of the variance in risky behaviour could be explained by including individual sensitivity to rewards and punishments. These findings and the implications are discussed.

Study on ride comfort assessment of multiple occupants using lumped parameter analysis

Growing consumer expectations continue to fuel further advancements in vehicle ride comfort analysis including development of a comprehensive tool capable of aiding the understanding of ride comfort. To date, most of the work on biodynamic responses of human body in the context of ride comfort mainly concentrates on driver or a designated occupant and therefore leaves the scope for further work on ride comfort analysis covering a larger number of occupants with detailed modeling of their body segments. In the present study, governing equations of a 13-DOF (degrees-of-freedom) lumped parameter model (LPM) of a full car with seats (7-DOF without seats) and a 7-DOF occupant model, a linear version of an earlier non-linear occupant model, are presented. One or more occupant models can be coupled with the vehicle model resulting into a maximum of 48-DOF LPM for a car with five occupants. These multi-occupant models can be formulated in a modular manner and solved efficiently using MATLAB/SIMULINK for a given transient road input. The vehicle model and the occupant model are independently verified by favorably comparing computed dynamic responses with published data. A number of cases with different dispositions of occupants in a small car are analyzed using the current modular approach thereby underscoring its potential for efficient ride quality assessment and design of suspension systems.

An integrated modeling approach to assess the impact on road freight transport demand of allowing longer and heavier vehicles (LHVs) in Spain

The assessment on introducing Longer and Heavier Vehicles (LHVs) on the road freight transport demand is performed in this paper by applying an integrated modeling approach composed of a Random Utility-Based Multiregional Input-Output model (RUBMRIO) and a road transport network model. The approach strongly supports the concept that changes in transport costs derived from the LHVs allowance as well as the economic structure of regions have both direct and indirect effects on the road freight transport system. In addition, we estimate the magnitude and extent of demand changes in the road freight transportation system by using the commodity-based structure of the approach to identify the effect on traffic flows and on pollutant emissions over the whole network of Spain by considering a sensitivity analysis of the main parameters which determine the share of Heavy-Goods Vehicles (HGVs) and LHVs. The results show that the introduction of LHVs will strengthen the competitiveness of the road haulage sector by reducing costs, emissions, and the total freight vehicles required.

A Framework for Spatial Road Safety Assessment: Case Study of Northern Ireland

Road traffic injuries are a major health issue worldwide. There are many factors that can
affect the levels of road traffic collisions which in turn increase the levels of people killed or
seriously injured. When road traffic collisions occur, observed facts are recorded in relation
to the incident. These facts are recorded as variable observations, and for this study,
variables and indicators are defined almost equivalently. There can be hundreds of different
indicators for the various collisions, as different countries face different road situations. This
makes it difficult to perform a road safety assessment, which can be applied globally. The
goal of this study is to select the most appropriate indicators and create a composite
indicator as a function of these indicators, which can be used as summary values, allowing
ease of comparisons between the countries/regions that have undergone a road safety
assessment. The composite indicator will then be used to assess the current situation in
Northern Ireland and provide scores for ranking policing in terms of overall road safety on
their road networks.

On-road ultrafine particle concentration in the M5 East road tunnel, Sydney, Australia

The human health effects following exposure to ultrafine (<100nm) particles (UFPs) produced by fuel combustion, while not completely understood, are generally regarded as detrimental. Road tunnels have emerged as locations where maximum exposure to these particles may occur for the vehicle occupants using them. This study aimed to quantify and investigate the determinants of UFP concentrations in the 4km twin-bore (eastbound and westbound) M5 East tunnel in Sydney, Australia. Sampling was undertaken using a condensation particle counter (CPC) mounted in a vehicle traversing both tunnel bores at various times of day from May through July, 2006. Supplementary measurements were conducted in February, 2008. Over three hundred transects of the tunnel were performed, and these were distributed evenly between the bores. Additional comparative measurements were conducted on a mixed route comprising major roads and shorter tunnels, all within Sydney. Individual trip average UFP concentrations in the M5 East tunnel bores ranged from 5.53 × 104 p cm-3 to 5.95 × 106 p cm-3. Data were sorted by hour of capture, and hourly median trip average (HMA) UFP concentrations ranged from 7.81 × 104 p cm-3 to 1.73 × 106 p cm-3. Hourly median UFP concentrations measured on the mixed route were between 3.71 × 104 p cm-3 and 1.55 × 105 p cm-3. Hourly heavy diesel vehicle (HDV) traffic volume was a very good determinant of UFP concentration in the eastbound tunnel bore (R2 = 0.87), but much less so in the westbound bore (R2 = 0.26). In both bores, the volume of passenger vehicles (i.e. unleaded gasoline-powered vehicles) was a significantly poorer determinant of particle concentration. When compared with similar studies reported previously, the measurements described here were among the highest recorded concentrations, which further highlights the contribution road tunnels may make to the overall UFP exposure of vehicle occupants.

To err (on the road) is human? An on-road study of driver errors

Human error, its causes and consequences, and the ways in which it can be prevented, remain of great interest to road safety practitioners. This paper presents the findings derived from an on-road study of driver errors in which 25 participants drove a pre-determined route using MUARC's On-Road Test Vehicle (ORTeV). In-vehicle observers recorded the different errors made, and a range of other data was collected, including driver verbal protocols, forward, cockpit and driver video, and vehicle data (speed, braking, steering wheel angle, lane tracking etc). Participants also completed a post trial cognitive task analysis interview. The drivers tested made a range of different errors, with speeding violations, both intentional and unintentional, being the most common. Further more detailed analysis of a sub-set of specific error types indicates that driver errors have various causes, including failures in the wider road 'system' such as poor roadway design, infrastructure failures and unclear road rules. In closing, a range of potential error prevention strategies, including intelligent speed adaptation and road infrastructure design, are discussed.

Using data mining on road asset management data in analysing road crashes

Road safety is a major concern worldwide. Road safety will improve as road conditions and their effects on crashes are continually investigated. This paper proposes to use the capability of data mining to include the greater set of road variables for all available crashes with skid resistance values across the Queensland state main road network in order to understand the relationships among crash, traffic and road variables. This paper presents a data mining based methodology for the road asset management data to find out the various road properties that contribute unduly to crashes. The models demonstrate high levels of accuracy in predicting crashes in roads when various road properties are included. This paper presents the findings of these models to show the relationships among skid resistance, crashes, crash characteristics and other road characteristics such as seal type, seal age, road type, texture depth, lane count, pavement width, rutting, speed limit, traffic rates intersections, traffic signage and road design and so on.