Assessment of physical activity among primary school aged children: the Children's Leisure Activities Study (CLASS)

Overweight and obesity rates among children in Australia have increased twofold in the last decade. Physical activity is thought to play an important role in the prevention and treatment of childhood obesity. Children's physical activity data in Australia are incomplete and mainly based on parental proxy reports. One of the reasons for the lack of children's physical activity prevalence data in Australia is the difficulties of measurement. The aim of this study was to develop and examine a reliable, valid and feasible method for assessing physical activity among primary school aged children. A total of 112 grade 5 and 6 children and their parents were recruited from four state primary schools in the eastern and western suburbs of Melbourne. The test-retest reliability of a parental proxy physical activity questionnaire and a children's self report physical activity questionnaire was assessed. The criterion validity of the questionnaires was assessed using accelerometry. Findings suggest that the self report and proxy report questionnaires provided reliable measures of the type, frequency and duration of children's physical activity behaviour. Overall, the criterion validity of the questionnaires was poor. Although accelerometry as an objective measure shows promise, it does not provide the important physical activity behavioural and contextual information that is critical for the development of strategies to promote physical activity among children. We recommend that a combination of self report or proxy and objective measurement (using accelerometry or even pedometry) appears to be the current 'best buy' in the assessment of children's physical activity behaviour.

Sources of variation contributing to production and quality attributes of Kyrgyz cashmere in Osh and Naryn provinces : implications for industry development

We aimed to quantify the sources of variation contributing to the production and quality of cashmere produced in five districts in Osh and Naryn provinces of Kyrgyzstan. In early spring 2008 mid-side cashmere samples were taken from 719 cashmere adult females, and 41 cashmere adult males and castrates. Samples came from 53 villages and a total of 156 farmers’ flocks. For 91 goats from 33 farmers in 13 villages of two districts that had been sampled earlier, cashmere was combed from the goat at the time of a second visit (end of April 2008) when the cashmere would normally be harvested. Following standard cashmere objective measurement, data were examined using general linear modelling to quantify the effects of potential determinants. The mean fibre diameter (MFD) of cashmere differed between provinces (Osh 15.7 μm, Naryn 16.7 μm; P = 4.4 × 10−20). About 42% of the cashmere was <16 μm, 48% was 16.0–18.0 μm and 9.5% was >18.0 μm. Most of the cashmere samples were coloured (81%), with 63% black and 19% white. The percentage of cashmere samples that were white declined as MFD increased (26% < 14 μm to 11% of >18 μm). The primary determinants of cashmere MFD of individual goats were age of goat (range 1.46 μm, P = 1.8 × 10−12) and farm (range 6.5 μm, P = 1.7 × 10−14). The lesser effects detected for sex (range 0.9 μm, P = 0.026) and colour of cashmere (range 1.8 μm, P = 0.023) were based on small sample sizes and are unreliable. Age of goat had important affects on fibre diameter variation (up to 1.7% in coefficient of variation, P = 5.8 × 10−6) and fibre curvature (2.5–5°/mm, P = 2.1 × 10−4). By far the greatest effect on fibre curvature was cashmere MFD (P = 3.0 × 10−104) with a smaller effect of sex (about 5°/mm, P = 3.0 × 10−6). Village effects were detected on fibre diameter variability (range 4.5% in coefficient of variation, P = 0.027) and fibre curvature (range 15°/mm, P = 1.6 × 10−7). There was a strong negative association between increasing MFD and declining fibre curvature (−5.11 ± 0.181°/mm per 1 μm; P = 7.1 × 10−121; r2 = 0.51). Average combed cashmere weight was 164 g, the clean cashmere content was 0.661 and median clean cashmere production was 110 g per goat (range 60–351 g). Combed cashmere production increased with altitude of the village, probably related to different moulting times as spring temperatures warmed up later in higher altitude villages up to 3200 masl. Measurements of combed cashmere MFD were coarser than the mid-side samples taken earlier in the year. There are farmers and cashmere goats in the sampled districts of Kyrgyzstan which produce the finest qualities of commercial cashmere as the vast majority of cashmere is fine, has low variation in fibre diameter and has fibre crimping (curvature) typical of Chinese and Mongolian cashmere. There is substantial scope to increase the production and commercial value of cashmere produced by Kyrgyz goats. In particular, some villages and farmers need to change their buck selection practices if they wish to produce acceptable cashmere. Farmers should separate their finer and white cashmere prior to sale.

The effect of humidity and temperature on Wool Comfort Meter assessment of single jersey wool fabrics

The Wool ComfortMeter provides an objective measurement of the fabric-evoked prickle discomfort rating provided by wearers. This work aimed to quantify the sensitivity of the Wool ComfortMeter over a range of different temperature and humidity conditions to determine the recommended test conditions for its operation. The design was: three temperatures (notionally 20, 25 and 30°C) at three relative humidities (RHs, notionally 50, 65 and 80%) each with two replicates, using six different wool single jersey knits (mean fibre diameter 19.5–27.0 µm). As it was difficult to achieve exactly some of the extreme combinations of temperature and RH, some combinations were repeated, providing a total of 23 different assessment conditions. Data were analysed using restricted maximum likelihood mixed model analysis. The best fixed model included RH, RH2, temperature and the interaction of temperature and RH, accounting for 95% of the variation in Wool ComfortMeter readings. Wool ComfortMeter values were almost constant at 55–60% RH. Generally, the Wool ComfortMeter value reduced with increasing RH > 60% at temperatures of 25°C and 28.5°C as the regain of the fabric increased. However, at 20°C little change was detected as RH was increased from 50 to 80% as there were only small changes in fabric regain. The observed effects were in a good agreement with existing knowledge on the effect of regain on the mechanical properties of wool fibre. Wool ComfortMeter is best operated under standard conditions for textile testing of 65% RH and 20°C.

Reducing office workers' sitting time: rationale and study design for the Stand Up Victoria cluster randomized trial

Background
Excessive time spent in sedentary behaviours (sitting or lying with low energy expenditure) is associated with an increased risk for type 2 diabetes, cardiovascular disease and some cancers. Desk-based office workers typically accumulate high amounts of daily sitting time, often in prolonged unbroken bouts. The Stand Up Victoria study aims to determine whether a 3-month multi-component intervention in the office setting reduces workplace sitting, particularly prolonged, unbroken sitting time, and results in improvements in cardiometabolic biomarkers and work-related outcomes, compared to usual practice.

Methods/design
A two-arm cluster-randomized controlled trial (RCT), with worksites as the unit of randomization, will be conducted in 16 worksites located in Victoria, Australia. Work units from one organisation (Department of Human Services, Australian Government) will be allocated to either the multi-component intervention (organisational, environmental [heightadjustable workstations], and individual behavioural strategies) or to a usual practice control group. The recruitment target is 160 participants (office-based workers aged 18–65 years and working at least 0.6 full time equivalent) per arm. At each assessment (0- [baseline], 3- [post intervention], and 12-months [follow-up]), objective measurement via the activPAL3 activity monitor will be used to assess workplace: sitting time (primary outcome); prolonged sitting time (sitting time accrued in bouts of ≥30 minutes); standing time; sit-to-stand transitions; and, moving time. Additional outcomes assessed will include: non-workplace activity; cardio-metabolic biomarkers and health indicators (including fasting glucose, lipids and insulin; anthropometric measures; blood pressure; and, musculoskeletal symptoms); and, work-related outcomes (presenteeism, absenteeism, productivity, work performance). Incremental cost-effectiveness and identification of both workplace and individual-level mediators and moderators of change will also be evaluated.

Ultrafine wools: comfort and handle properties for next-to-skin knitwear and manufacturing performance

This study aimed to quantify the skin comfort and handle properties of a range of wool fabrics produced from ultrafine wool (13.7–15.1 µm) and in doing so determine if differences in fiber diameter and staple crimp frequency (5.3–7.1 crimps/cm) were important in these properties. The fabrics were evaluated using a range of subjective and objective measurement techniques, including the Wool ComfortMeter, the Wool HandleMeter and in wearer trials. This work indicated that single jersey fabrics made from ultrafine wool are approaching the limit of objective and subjective evaluation of next-to-skin comfort. The results from the Wool ComfortMeter, Wool HandleMeter and the wearer trial show that there were no significant effects that can be attributed to wool staple crimp (fiber curvature) in these ultrafine wool fabrics. The work also demonstrated a difference in the manufacturing response when knitted fabric made from wools of different fiber diameter (13.7–23.7 µm), and using yarns of the same count, resulted in a progressively higher fabric mass per unit area as mean fiber diameter was progressively reduced.

Evaluation of the Test-mate ChE (cholinesterase) field kit in acute organophosphorus poisoning

STUDY OBJECTIVE: Measurement of acetylcholinesterase (AChE) is recommended in the management of organophosphorus poisoning, which results in 200,000 deaths worldwide annually. The Test-mate ChE 400 is a portable field kit designed for detecting occupational organophosphorus exposure that measures RBC AChE and plasma cholinesterase (PChE) within 4 minutes. We evaluate Test-mate against a reference laboratory test in patients with acute organophosphorus self-poisoning. METHODS: This was a cross-sectional comparison study of 14 patients with acute organophosphorus poisoning between May 2007 and June 2008. RBC AChE and PChE were measured in 96 and 91 samples, respectively, with the Test-mate ChE field kit and compared with a reference laboratory, using the limits of agreement method (Bland and Altman), κ statistics, and Spearman's correlation coefficients. RESULTS: There was good agreement between the Test-mate ChE and the reference laboratory for RBC AChE. The mean difference (Test-mate-reference) was -0.62 U/g hemoglobin, 95% limits of agreement -10.84 to 9.59 U/g hemoglobin. Good agreement was also observed between the categories of mild, moderate, and severe RBC AChE inhibition (weighted κ 0.85; 95% confidence interval [CI] 0.83 to 0.87). Measurement of PChE also showed good agreement, with a mean difference (Test-mate-reference) of +0.06 U/mL blood, 95% limits of agreement -0.41 to 0.53 U/mL blood. Spearman's correlation coefficients were 0.87 (95% CI 0.81 to 0.91) for RBC AChE and 0.76 (95% CI 0.66 to 0.84) for PChE. Analysis for within-subject correlation of subjects did not change the limits of agreement. CONCLUSION: The Test-mate ChE field kit reliably provides rapid measurement of RBC AChE in acute organophosphorus poisoning.

Kinematic analysis in healthy and hip-dysplastic German Shepherd dogs

This study investigated kinematic patterns in clinically normal German Shepherd dogs (GSDs) compared to those with hip dysplasia and with no clinical signs of lameness. Two groups of GSDs, including 10 clinically healthy dogs (G1) and 10 with hip dysplasia (G2), were trotted on a treadmill at a constant speed. Kinematic data were collected by a 3-camera system and analysed by a motion-analysis program. Flexion and extension joint angles and angular velocities were determined for the shoulder, elbow, carpal, hip, stifle, and tarsal joints.Within each group, the differences between the right and left limbs in all kinematic variables were not significant. Minimum angle, angular displacement and minimum angular velocity did not differ between groups. Significant differences were observed in the maximum angular velocity and maximum angle of the hip joint (dysplastic. >. healthy), and in the maximum angular velocity of the carpal joint (healthy. >. dysplastic). It was concluded that, when trotting on a treadmill, dysplastic dogs with no signs of lameness may present joint kinematic alterations in the hind as well as the forelimbs. © 2012 Elsevier Ltd.

Efeitos da vibração simultânea nas propriedades mecânicas de juntas de aço ASTM A131 soldadas pelo processo arame tubular (FCAW)

Pós-graduação em Engenharia Mecânica - FEG

EVALUATION OF THE PASSIVE RESISTIVE TORQUE IN FEMALE ATHLETES WITH ANKLE SPRAIN

Introduction: The ankle sprain is one of the most common injuries in athletes. Direct evaluation of the ligament laxity can be obtained through the objective measurement of extreme passive inversion and eversion movements, but there are few studies on the use of the evaluation of the passive resistive torque of the ankle to assess the capsule and ligaments resistance. Objective: The aim of this study was to compare the inversion and eversion passive torque in athletes with and without ankle sprains history. Method: 32 female basketball and volleyball athletes (16.06 +/- 0.8 years old; 67.63 +/- 8.17 kg; 177.8 +/- 6.47 cm) participated in this study. Their ankles were divided into two groups: control group (29), composed of symptom-free ankles, and ankle sprain group, composed of ankles which have suffered injury (29). The resistive torque at maximum passive ankle movement was measured by the isokinetic dynamometer and the muscular activity by electromyography system. The athletes performed 2 repetitions of inversion and eversion movement at 5, 10 and 20 degrees/s and the same protocol only at maximum inversion movement. Results: The resistive passive torque during the inversion and eversion was lower in the ankle sprain group. This group also showed lower torques at the maximum inversion movement. No differences were observed between inversion and eversion movement. Conclusions: Ankle sprain leads to lower passive torque, indicating reduction of the resistance of the lateral ankle ligaments and mechanical laxity.

Portable light transmission measuring system for preserved corneas

Abstract Background The authors have developed a small portable device for the objective measurement of the transparency of corneas stored in preservative medium, for use by eye banks in evaluation prior to transplantation. Methods The optical system consists of a white light, lenses, and pinholes that collimate the white light beams and illuminate the cornea in its preservative medium, and an optical filter (400–700 nm) that selects the range of the wavelength of interest. A sensor detects the light that passes through the cornea, and the average corneal transparency is displayed. In order to obtain only the tissue transparency, an electronic circuit was built to detect a baseline input of the preservative medium prior to the measurement of corneal transparency. The operation of the system involves three steps: adjusting the "0 %" transmittance of the instrument, determining the "100 %" transmittance of the system, and finally measuring the transparency of the preserved cornea inside the storage medium. Results Fifty selected corneas were evaluated. Each cornea was submitted to three evaluation methods: subjective classification of transparency through a slit lamp, quantification of the transmittance of light using a corneal spectrophotometer previously developed, and measurement of transparency with the portable device. Conclusion By comparing the three methods and using the expertise of eye bank trained personnel, a table for quantifying corneal transparency with the new device has been developed. The correlation factor between the corneal spectrophotometer and the new device is 0,99813, leading to a system that is able to standardize transparency measurements of preserved corneas, which is currently done subjectively.

Einfluss neurologischer Krankheitsbilder auf die Vigilanz gemessen mit dem Pupillographischen Schläfrigkeitstest

Zahlreiche neurologische Erkrankungen wie Morbus Parkinson oder Epilepsien sind mit nicht erholsamem Schlaf und erhöhter Tagesschläfrigkeit assoziiert. Andere Erkrankungen wie Multiple Sklerose induzieren zwar Fatigue / Müdigkeit, aber keine objektivierbar erhöhte Einschlafneigung. Aufgrund der komplexen Interaktionen von Grunderkrankung, Krankheitsfolgen und Medikationseffekten differieren subjektive Einschätzung und objektive Maße von Schläfrigkeit oft erheblich. Der pupillographische Schläfrigkeitstest (PST) ist ein effizientes und objektives Verfahren zur Bestimmung der Vigilanz bzw. Tagesschläfrigkeit, für neurologische Patienten unter naturalistischen Bedingungen liegen aber nur wenige Daten vor.

Performance of a new, 3D-monitor based random-dot stereotest for children under 4 years of age

BACKGROUND: The aim of this study was to determine the performance of a new, 3D-monitor based, objective stereotest in children under the age of four. METHODS: Random-dot circles (diameter 10 cm, crossed, disparity of 0.34 degrees) randomly changing their position were presented on an 3D-monitor while eye movements were monitored by infrared photo-oculography. If > or = 3 consecutive stimuli were seen, a positive response was assumed. One hundred thirty-four normal children aged 2 months to 4 years (average 17+/-15.3 months) were examined. RESULTS: Below the age of 12 months, we were not able to obtain a response to the 3D stimulus. For older children the following rates of positive responses were found: 12-18 months 25%, 18-24 months 10%, 24-30 months 16%, 30-36 months 57%, 36-42 months 100%, and 42-48 months 91%. Multiple linear logistic regression showed a significant influence on stimulus recognition of the explanatory variables age (p<0.00001) and child cooperation (p<0.001), but not of gender (p>0.1). CONCLUSIONS: This 3D-monitor based stereotest allows an objective measurement of random-dot stereopsis in younger children. It might open new ways to screen children for visual abnormalities and to study the development of stereovision. However, the current experimental setting does not allow determining random-dot stereopsis in children younger than 12 months.

Assessment of smoking behaviour in a dental setting: a 1-year follow-up study using self-reported questionnaire data and exhaled carbon monoxide levels.

OBJECTIVES This study analyses the changes in smoking habits over the course of 1 year in a group of patients referred to an oral medicine unit. MATERIALS AND METHODS Smoking history and behaviour were analysed at baseline and after 1 year based on a self-reported questionnaire and on exhaled carbon monoxide levels [in parts per million (ppm)]. During the initial examination, all smokers underwent tobacco use prevention and cessation counselling. RESULTS Of the initial group of 121 patients, 98 were examined at the follow-up visit. At the baseline examination, 33 patients (33.67 %) indicated that they were current smokers. One year later, 14 patients (42.24 % out of the 33 smokers of the initial examination) indicated that they had attempted to stop smoking at least once over the follow-up period and 15.15 % (5 patients) had quit smoking. The mean number of cigarettes smoked per day by current smokers decreased from 13.10 to 12.18 (p = 0.04). The exhaled CO level measurements showed very good correlation with a Spearman's coefficient 0.9880 for the initial visit, and 0.9909 for the follow-up examination. For current smokers, the consumption of one additional cigarette per day elevated the CO measurements by 0.77 ppm (p < 0.0001) at the baseline examination and by 0.84 ppm (p < 0.0001) at the 1-year follow-up. CONCLUSIONS In oral health care, where smoking cessation is an important aspect of the treatment strategy, the measurement of exhaled carbon monoxide shows a very good correlation with a self-reported smoking habit. CLINICAL RELEVANCE Measurement of exhaled carbon monoxide is a non-invasive, simple and objective measurement technique for documenting and monitoring smoking cessation and reduction.

MEMLS3&a: Microwave Emission Model of Layered Snowpacks adapted to include backscattering

The Microwave Emission Model of Layered Snowpacks (MEMLS) was originally developed for microwave emissions of snowpacks in the frequency range 5–100 GHz. It is based on six-flux theory to describe radiative transfer in snow including absorption, multiple volume scattering, radiation trapping due to internal reflection and a combination of coherent and incoherent superposition of reflections between horizontal layer interfaces. Here we introduce MEMLS3&a, an extension of MEMLS, which includes a backscatter model for active microwave remote sensing of snow. The reflectivity is decomposed into diffuse and specular components. Slight undulations of the snow surface are taken into account. The treatment of like- and cross-polarization is accomplished by an empirical splitting parameter q. MEMLS3&a (as well as MEMLS) is set up in a way that snow input parameters can be derived by objective measurement methods which avoid fitting procedures of the scattering efficiency of snow, required by several other models. For the validation of the model we have used a combination of active and passive measurements from the NoSREx (Nordic Snow Radar Experiment) campaign in Sodankylä, Finland. We find a reasonable agreement between the measurements and simulations, subject to uncertainties in hitherto unmeasured input parameters of the backscatter model. The model is written in Matlab and the code is publicly available for download through the following website: http://www.iapmw.unibe.ch/research/projects/snowtools/memls.html.

El color en las aceitunas negras naturales de mesa : nueva técnica de mensura digitalizada para optimizar el método de oscurecimiento natural

Se aplicó un nuevo método para la evaluación objetiva del color en aceitunas de mesa, basado en el análisis de la intensidad de reflexión de cada uno de los colores primarios que componen la luz blanca (rojo, verde y azul), según las longitudes de onda del Sistema RGB. Se trabajó con programas informáticos para el análisis de imágenes digitales color tipo BMP de 24 bits. Este trabajo proporciona mayor información sobre el pardeamiento de las aceitunas naturales en salmuera, lo que sería muy útil para incrementar la efectividad del proceso. El método propuesto es rápido y no destructivo, prometiendo ser muy práctico ya que permite que una misma muestra pueda ser evaluada en el tiempo. Se investigaron los cambios de color en aceitunas elaboradas naturalmente, con diferentes grados de madurez (pintas, rojas y negras) y a diferentes valores de pH (3,6 - 4,0 - 4,5), expuestas al aire durante períodos crecientes de tiempo. Se cuantificó el grado de oscurecimiento a través de Índices de Intensidad de Reflexión. La evolución del índice de reflexión en función del tiempo generó una curva polinomial de 4° grado que reveló el comportamiento sigmoidal del fenómeno de pardeamiento enzimático, con la máxima correlación a las 8 horas de aireación. Esta función permitiría predecir el fenómeno de pardeamiento en las aceitunas negras y representa una medición objetiva del grado relativo de pardeamiento. La evolución del color rojo (λ = 700,0 nm) exhibió la mayor correlación con el proceso de pardeamiento. Las aceitunas rojas naturales a pH 4,5 presentaron óptimo pardeamiento. El espectro de reflexión para el color azul (λ = 435,8 nm) se sugiere como medida de la actividad de la enzima PPO (polifenoloxidasa).