Preparation of bionanoparticles derived from Spirulina platensis and its application for Cr (VI) removal from aqueous solutions

Spirulina platensis nanoparticles were prepared by mechanical agitation and were applied to removal Cr (VI) from aqueous solutions. Nanoparticles preparation was function of stirring rate and contact time. In the optimal conditions, Cr (VI) removal by nanoparticles as a function of pH and initial ion concentration was carried out. The optimal conditions for preparation were 10,000 rpm and 20 min, and the nanoparticles presented mean diameter of 215.6 nm and polydispersity index of 0.151. The best conditions for Cr (VI) removal were at pH 4 and ion concentration of 250 mg L 1, and the Cr (VI) removal percentage was 99.1%.

Evaluation of mechanical properties and water vapor permeability in Chitosan biofilms using Sorbitol and Glycerol

Chitosan biofilms were prepared with and without plasticizer (glycerol and sorbitol). The physical and mechanical properties of chitosan biofilms with and without plasticizer were evaluated. Chitosan was obtained from shrimp wastes and characterized. The film forming solution (FFS) was obtained through chitosan dissolution and drying. The solution had its pH adjusted to 6.0 and oven dried (40 8C, 24 h) with forced air circulation. Chitosan biofilms without plasticizer showed a tensile strength about 36% higher than biofilms produced with plasticizer. On the other hand, biofilms with plasticizer presented superior values of elongation. The permeability of the water vapor and color presented significant difference (p<0.05) between all biofilms. Chitosan/plasticizer biofilms showed higher values of water vapor permeability in relation to chitosan biofilms without plasticizer.

Evaluation of molecular weight of Chitosan in thin-layer and spouted bed drying

Chitosan is chitin in deacetylated form and is the main constituent of crustacean exoskeletons. Commercially, chitosan is dried in tray driers, and during the operation, polymerization may occur as the chitosan is composed of carbohydrates. The aim of this work was to analyze chitosan in spouted bed and thin-layer drying, considering viscosity average molecular weight of the chitosan samples in the process. Results showed that spouted bed-dried chitosan presented a molecular weight value similar (160 kDa) to that of the raw one (150 kDa). However, when dried on tray dryers, the molecular weight was 300 kDa, indicating that molecule polymerization occurred.

Evaluation of molar weight and deacetylation degree of chitosan during chitin deacetylation reaction: Used to produce biofilm

Chitosan is a polysaccharide derived from chitin, mainly of crustacean shells and shrimp wastes. The utilization of chitosan is related to the molar weight and deacetylation degree of the biopolymer. The aim of this work is to study the chitin deacetylation reaction, by the viscosity average molar weight and deacetylation degree of chitosan as a function of reaction time. Deacetylation was carried out in concentrated alkaline solution, 421 g L−1, at 130◦C and the reaction occurred during 4 h. Chitosan paste obtained after 20, 90 and 240 min was used to produce biofilms, which were characterized according water vapor permeability and mechanical properties (tensile strength and percentage tensile elongation at break). During the reaction time deacetylation degree reached 93%, and a 50% reduction in the viscosity average molar weight value in relation to the value of the first 20 min of reaction was found Both reactions presented a kinetic behavior of the pseudo-first order. Biofilm produced from the paste of chitosan with high deacetylation degree showed higher water vapor permeability (WVP), tensile strength (TS) and elongation (E) when compared to films with a low deacetylation.

Adsorption of food dyes onto chitosan: Optimization process and kinetic

Adsorption of food dyes acid blue 9 and food yellow 3 onto chitosan was optimized. Chitosan was obtained from shrimp wastes and characterized.Afull factorial design was used to analyze the effects of pH, stirring rate and contact time in adsorption capacity. In the optimal conditions, adsorption kinetics was studied and the experimental data were fitted with three kinetic models. The produced chitosan showed good characteristics for dye adsorption. The optimal conditions were: pH 3, 150rpm and 60 min for acid blue 9 and pH 3, 50rpm and 60 min for food yellow 3. In these conditions, the adsorption capacities values were 210mgg−1 and 295mgg−1 for acid blue 9 and food yellow 3, respectively. The Elovich kinetic model was the best fit for experimental data and it showed the chemical nature of dyes adsorption onto chitosan.

New N-acylamino acids and derivatives from renewable fatty acids: gelation of hydrocarbons and thermal properties

This work reports the synthesis of new fatty N-acylamino acids and N-acylamino esters from the C16:0, C18:0, C18:1, and C18:1(OH) fatty acid families and demonstrates the activity of these compounds as organogel agents. Compounds were heated and dissolved in various solvents (n-hexane, toluene, and gasoline). Only saturated C16:0 and C18:0 derived from alanine were able to form gels in toluene, and saturated C16:0 derived from phenylalanine showed gelation in n-hexane. This is the first evidence that fatty N-acylamino esters and N-acylamino acid derivatives of l-serine and fatty acids C16:0, C18:0, and C18:1 are able to form gels with hexane. This observation confirms the importance of the hydroxyl group in the segment derivative of l-serine in forming good gels.

Multicomponent biginelli's synthesis of 3,4-dihydropyrimidin-2(1H)-ones promoted by SnCl2.2H2O

The ability of SnCl2.2H2O as catalyst to promote the Biginelli three-component condensation reaction from a diversity of aromatic aldehydes, ethyl acetoacetate and urea or thiourea is described. The reaction was carried out in acetonitrile or ethanol as solvents in neutral media and represents an improvement of the classical Biginelli protocol and an advantage in comparison with FeCl3.6H2O, NiCl2.6H2O and CoCl2.6H2O which were used with HCl as co-catalyst. The synthesis of 3,4-dihydropyrimidinones was achieved in good to excelent yields.

Electrochemical Oxidation of N - p -Toluenesulfinamides

Contrasting and interesting electrochemical behavior is observed in anodic oxidation of N-substituted p-toluenesulfinamides under controlled current conditions. For sulfinamides derived from secondary alkylamines and primary arylamines, the N-sulfinyl group is removed and the corresponding amines are formed; for sulfinamides derived from primary alkylamines, sulfur oxidation yields the corresponding sulfonamides in good yields.

Mannich-Type reactions in the Gas-Phase: the addition of Enol Silanes to cyclic N-Acyliminium Ions

The intrinsic gas-phase reactivity of cyclic N-acyliminium ions in Mannich-type reactions with the parent enol silane, vinyloxytrimethylsilane, has been investigated by double- and triple-stage pentaquadrupole mass spectrometric experiments. Remarkably distinct reactivities are observed for cyclic N-acyliminium ions bearing either endocyclic or exocyclic carbonyl groups. NH-Acyliminium ions with endocyclic carbonyl groups locked in s-trans forms participate in a novel tandem N-acyliminium ion reaction:  the nascent adduct formed by simple addition is unstable and rearranges by intramolecular trimethylsilyl cation shift to the ring nitrogen, and an acetaldehyde enol molecule is eliminated. An NSi(CH3)3-acyliminium ion is formed, and this intermediate ion reacts with a second molecule of vinyloxytrimethylsilane by simple addition to form a stable acyclic adduct. N-Acyl and N,N-diacyliminium ions with endocyclic carbonyl groups, for which the s-cis conformation is favored, react distinctively by mono polar [4+ + 2] cycloaddition yielding stable, ressonance-stabilized cycloadducts. Product ions were isolated via mass-selection and structurally characterized by triple-stage mass spectrometric experiments. B3LYP/6-311G(d,p) calculations corroborate the proposed reaction mechanisms.

Intrinsic gas-phase electrophilic reactivity of Ccclic N-alkyl- and N-acyliminium ions

he intrinsic gas-phase reactivity of cyclic N-alkyl- and N-acyliminium ions toward addition of allyltrimethylsilane (ATMS) has been compared using MS2 and MS3 pentaquadrupole mass spectrometric experiments. An order of electrophilic reactivity has been derived and found to agree with orders of overall reactivity in solution. The prototype five-membered ring N-alkyliminium ion 1a and its N-CH3 analogue 1b, as well as their six-membered ring analogues 1c and 1d, lack N-acyl activation and they are, accordingly, inert toward ATMS addition. The five- and six-membered ring N-acyliminium ions with N-COCH3 exocycclic groups, 3a and 3b, respectively, are also not very reactive. The N-acyliminium ions 2a and 2c, with s-trans locked endocyclic N-carbonyl groups, are the most reactive followed closely by 3c and 3d with exocyclic (and unlocked) N-CO2CH3 groups. The five-membered ring N-acyliminium ions are more reactive than their six-membered ring analogues, that is:  2a > 2c and 3c > 3d. In contrast with the high reactivity of 2a, its N-CH3 analogue 2b is inert toward ATMS addition. For the first time, the transient intermediates of a Mannich-type condensation reaction were isolatedthe β-silyl cations formed by ATMS addition to N-acyliminium ionsand their intrinsic gas-phase behavior toward dissociation and reaction with a nucleophile investigated. When collisionally activated, the β-silyl cations dissociate preferentially by Grob fragmentation, that is, by retro-addition. With pyridine, they react competitively and to variable extents by proton transfer and by trimethylsilylium ion abstractionthe final and key step postulated for α-amidoalkylation. Becke3LYP/6-311G(d,p) reaction energetics, charge densities on the electrophilic C-2 site, and AM1 LUMO energies have been used to rationalize the order of intrinsic gas-phase electrophilic reactivity of cyclic iminium and N-acyliminium ions.

The Addition of Allyltrimethylsilane to Cyclic N-Acyliminium Ions Derived from (S)-(+)-Mandelic Acid and Cyclohexyl-Based Chiral Auxiliaries

A adição de aliltrimetilsilano, promovida por TiCl4, a íons N-aciliminios cíclicos de 5- e 6-membros derivados do ácido (S)-(+)-mandélico, (1R,2S)-trans-2-fenil-1-cicloexanol e (1R,2S,5R)-8-fenilmentol ocorreu com baixas a moderadas razões diastereoisoméricas (1:1-6:1) e forneceu as respectivas amidas e carbamatos em bons rendimentos. A melhor diastereosseleção facial foi observada com o uso de (1R,2S,5R)-8-fenilmentol como auxiliar quiral. As amidas e carbamatos 2-substituídos foram convertidos nos alcalóides (S)- e (R)-propil pirrolidina e coniina com eficiente recuperação dos auxiliares quirais.

Optimisation of Spirulina platensis convective drying: evaluation of phycocyanin loss and lipid oxidation

The aim of the study was the optimisation of Spirulina platensis drying on convective hot air through the response surface methodology. The responses were thiobarbituric acid (TBA) and phycocyanin loss percentage values in final product. Experiments were carried out in perforated tray drier with parallel air flow, and the wet samples thickness and drying air temperatures were in range of 3–7 mm and 50–70 °C, respectively. The statistical analysis showed significant effect (P < 0.05) for air temperature and samples thickness. In the best drying condition, 55 °C and 3.7 mm, presented the phycocyanin loss percentage and the TBA values of approximately 37% and 1.5 mgMDA kg−1, respectively. In this drying condition, the fatty acids composition of the microalgae Spirulina did not show significance difference (P > 0.05) in relation to fresh biomass. The lipid profile of dried product presented high percentage of polyunsaturated fatty acids (34.4%), especially the gamma-linolenic acid (20.6%).

Exposure Assessment for Formaldehyde and Acetaldehyde in the Workplace

Personal exposure and possible cancer risk to formaldehyde and acetaldehyde were appraised in 8 work places at a university in Brazil. Levels of formaldehyde measured ranged from 22.5 to 161.5 g·m 3 and from 18.3 to 91.2 g·m 3 for acetaldehyde. The personal exposure, expressed as the potential dose in indoor air, was calculated to range from 129.8 to 930.4 g·day 1 (low exposure) and 183.9 to 1318.1 g·day 1 (medium exposure) for formaldehyde and 105.5 to 525.3 g·day 1 (low exposure) and 149.5 to 744.2 g·day 1 (medium exposure) for acetaldehyde. The indoor/outdoor ratio showed the existence of indoor sources of the compounds which were mainly in practical classes and research laboratories. The highest formaldehyde and acetaldehyde levels were found where chemical reagents were manipulated. Relating the levels found to the permissible limit given by the US OSHA showed there was no particular risk although some formaldehyde levels did exceed the lower exposure limit of the US agency NIOSH. Any cancer risk would be highest for female technicians and teaching researchers.

Synthesis and differential antiproliferative activity of Biginelli compounds against cancer cell lines: Monastrol, oxo-monastrol and oxygenated analogues

The synthesis and differential antiproliferative activity of monastrol (1a), oxo-monastrol (1b) and eight oxygenated derivatives 3a,b–6a,b on seven human cancer cell lines are described. For all evaluated cell lines, monastrol (1a) was shown to be more active than its oxo-analogue, except for HT-29 cell line, suggesting the importance of the sulfur atom for the antiproliferative activity. Monastrol (1a) and the thio-derivatives 3a, 4a and 6a displayed relevant antiproliferative properties with 3,4-methylenedioxy derivative 6a being approximately more than 30 times more potent than monastrol (1a) against colon cancer (HT-29) cell line.

Anti-MDR and antitumoral action of acetylsalicylic acid on leukaemic cells

ASA (acetylsalicylic acid) is an NSAID (non-steroidal anti-inflammatory drug). ASA has gained attention as a potential chemopreventive and chemotherapeutic agent for several neoplasms. The aim of this study was to analyse the possible antitumoural effects of ASA in two erythroleukaemic cell lines, with or without the MDR (multidrug resistance) phenotype. The mechanism of action of different concentrations of ASA were compared in K562 (non-MDR) and Lucena (MDR) cells by analysing cell viability, apoptosis and necrosis, intracellular ROS (reactive oxygen species) formation and bcl-2, p53 and cox-2 gene expression. ASA inhibited the cellular proliferation or induced toxicity in K562 and Lucena cell lines, irrespective of the MDR phenotype. The ASA treatment provoked death by apoptosis and necrosis in K562 cells and only by necrosis in Lucena cells. ASA also showed antioxidant activity in both cell lines. The bcl-2, p53 and cox-2 genes in both cell lines treated with ASA seem to exhibit different patterns of expression. However, normal lymphocytes treated with the same ASA concentrations were more resistant than tumoral cells. The results of this work show that both cell lines responded to treatment with ASA, demonstrating a possible antitumoral and anti-MDR role for this drug.