Identifying trends in domestic electricity consumption in Botswana

Data on electricity consumption patterns relating to different end uses in domestic houses in Botswana is virtually non-existent, despite the fact that the total electricity consumption patterns are available. This can be attributed to the lack of measured and quantified data and in other instances the lack of modern technology to perform such investigations. This paper presents findings from initial studies that are envisaged to bridge the gap. Electricity consumption patterns of 73 domestic households across three cities have been studied. This was carried out through a questionnaire survey, calculated national metering data and electricity measurements. All together nine appliance groups were identified. The results showed the mean electricity consumption for the households considering the calculated consumption from bills and the survey to be t = 4.23; p < 0.000067, two-tailed. The findings of this paper focus on a relatively small sample size (73). It would therefore not be wise to draw sweeping conclusions from the analysis or to make statements that would be aimed at influencing policies. However, the results presented forms a formidable base for further research, which is currently on going.

Trends in domestic electricity consumption in Botswana

Data on electricity consumption patterns relating to different end uses in domestic houses in Botswana is virtually non-existent, despite the fact that the total electricity consumption patterns are available. This can be attributed to the lack of measured and quantified data and in other instances the lack of modern technology to perform such investigations. This paper presents findings from initial studies that are envisaged to bridge the gap. Electricity consumption patterns of 275 domestic households in Gaborone (the capital city of Botswana) have been studied. This was carried out through a questionnaire survey and electricity measurements. Households were categorized based on the number of people occupying the house. From the study, it was evident that the number of people influences the amount of energy a household use although this cannot be treated as an independent factor when assessing energy use. The study also indicated that heating, cooling and domestic hot water (DHW) account for over 30% of energy used in the home. This is worth considering in energy consumption reduction measures. Due to a small sample size, it would not be wise to draw sweeping conclusions from the analysis of this paper or to make statements that would be aimed at influencing policies. However, the results presented forms a formidable base for further research, which is currently on going.

Teknik för en flerskiktadwebbapplikation

The report analyses if some common problems can be avoided by using modern technology. As a reference system “Fartygsrapporteringssystemet” is used. It is an n-tier web application built with modern technology at time, 2003-2004. The aim is to examine whether ASP.Net MVC, Windows Communication Foundation, Workflow Foundation and SQL Server 2005 Service Broker can be used to create an n-tier web application which also communicate with other systems and facilitate automated testing. The report describes the construction of a prototype in which the presentation layer uses ASP.Net MVC to separate presentation and business logic. Communication with the business layer is done through the Windows Communication Foundation. Hard coded processes are broken out and dealt with by Workflow Foundation. Asynchronous communication with other systems is done by using Microsoft SQL Server 2005 Service Broker. The results of the analysis is that these techniques can be used to create a n-tier web application, but that ASP.Net MVC, which at present only available in a preview release, is not sufficiently developed yet.

Public perceptions of the causes and prevention of obesity among primary school children

OBJECTIVE: To investigate lay perceptions of the causes and prevention of obesity among primary school children.

DESIGN: A cross-sectional survey of randomly selected sample of adults in a shopping centre.

SUBJECTS: 315 adults in Melbourne, Australia.

MEASUREMENTS: Subjects completed a self-completion questionnaire, in which they rated the importance of 25 possible causes of obesity and the importance of 13 preventive measures on four-point scales: not important; quite important; very important; extremely important. Demographic information about the respondents' age, sex, marital status, education level and parental status was also collected.

RESULTS: The most important reported causes of childhood obesity were related to overconsumption of unhealthy food, parental responsibility, modern technology and the mass media. The most popular prevention activities were associated with specific actions aimed at children. Principal components analysis of the causes data revealed eight factors, provisionally named: parental responsibility, modern technology and media, overconsumption of unhealthy food, children's lack of knowledge and motivation, physical activity environment, lack of healthy food, lack of physical activity and genes. Two prevention factors were also derived, named government action and children's health promotion. Parents saw modern technology and media, and government activities as more important causes, and government policy as a more important means of prevention than nonparents and men. Women's responses tended to be similar to those of parents. There were few educational differences, although nontertiary educated respondents reported that modern technology and media were more important causes of obesity than did the tertiary educated.

CONCLUSION: The findings suggest that the public appears to hold quite sophisticated views of the causes and prevention of children's obesity. They suggest that a number of prevention strategies would be widely supported by the public, especially by parents.

The silicon ceiling : women managers and leaders in ICT in Australia

When I was in high school, it was always talked up that women could do science, engineering and technical [work] too. While we are just as capable as men, when we get into these industries, we face other challenges. There have been brave women who have done their bit to overcome these challenges, but it also requires brave men to challenge the attitudes of these industries to women participating in their workplaces. (APESMA, 2010) Silicon: Elemental silicon has a large impact on the modern world economy ... Because of wide use of silicon in integrated circuits, the basis of most computers, a great deal of modern technology depends on it. (Wikipedia, 2011) The chapter begins with a historical and current analysis of female participation in the workforce, in education and in leadership. The second section focuses on the information and communication technology (ICT) workforce in particular. The third section presents findings from a recent case study that gathered both quantitative and qualitative data from a diverse group of professional women in ICT. The case study provides a view into the ICT profession from the female perspective and identifies a selection of factors that would make a significant difference to female participation and longevity in the profession. The conclusion reached after this investigation is that the silicon ceiling is certainly not visible, yet remains fixed due to nonessential job characteristics that persist in the industry. The future looks bleak unless more female managers and male champions ensure that these nonessential employment characteristics are removed from ICT positions.

As mudanças da cadeia produtiva têxtil em Valença-RJ: das indústrias do setor de tecidos para o APL do setor de Confecções

This study shows how the Industrial Cluster of garments in Valença, RJ ¿ comprised of micro and small enterprises ¿ contributes to overcome the problems left by the declining period of the textile industry. At first, the city took advantage of its talent for textile work and turned to the clothing sector, which now relies on garment factories, subcontractors, cooperatives and laundries in order to create jobs. There is institutional support, but the analysis of the situation identified the need for higher involvement of cluster players, as well as a higher interaction among them to help their own development. In regard to public and private institutions, there is room for steps to guide informal companies that find it difficult to afford labor, financial, and environmental costs towards formalization, the offer of management and labor skill programs, as well as entrepreneurs¿ awareness about the acquisition of modern-technology machinery. It is important to encourage higher participation of Valença firms in the national fashion events, since this draws attention to the name of the city, discloses the work that is carried out there, and attracts new businesses. The entry of Valença companies in the fashion arena of the southern region of Rio de Janeiro state is beneficial, especially to make them better prepared for the Fashion Rio/Fashion Business event. Informality as a way out of the unemployment problem is a growing trend in Valença, as well as in most of Brazilian cities. In this sense, the entrepreneurs need to find favorable steps to make them feel motivated to formalize their businesses.

Observatórios locais de políticas públicas no Brasil: seu papel na produção, disseminação e transparência das informações

Este trabalho tem como objetivo principal estudar os observatórios locais de políticas públicas e sua contribuição à democracia quanto à transparência e à produção das informações. Em razão dos observatórios serem ainda pouco estudados, estetrabalho tem caráter exploratório no sentido de buscar compreender a origem deste tipo de instituição, e a descrição e análise de suas principais características, ressaltando-se seu objetivo principal de produção de informações sobre políticas públicas em nível local de governo. A análise empírica buscou contribuir para a compreensão deste fenômeno institucional por meio de dois estudos de caso de observatórios locais de políticas públicas no Brasil: o Observatório dos Direitos do Cidadão, em São Paulo, e o Observatório das Metrópoles, no Rio de Janeiro. Em ambos, buscou-se revelar suas características principais, analisando-se seus objetivos e atividades realizados, relacionados à produção, disseminação e “tradução” das informações (no sentido de torná-las acessíveis ao cidadão comum), além seu uso no monitoramento das políticas públicas. As informações sobre os estudos de caso provêm da análise de: documentos (publicações e relatórios institucionais) dos observatórios; análise de sites na internet; entrevistas e observações realizadas nas sedes dos observatórios. Os resultados obtidos relacionam a origem destas instituições no Brasil ao contexto histórico da redemocratização e aos atores sociais e temáticas que emergem desse contexto. Buscou-se apresentar a complexidade deste arranjo institucional que, voltado à produção de informação de qualidade e aliando modernas tecnologias de informação e comunicação, tornou-se um espaço de relações intersociais, dado que desenvolvidas entre personagens oriundos da universidade, das ONGs e dos movimentos sociais. Por fim, buscou-se demonstrar a contribuição destas instituições para o fortalecimento de setores excluídos da sociedade no sentido de sua capacitação para a participação, o controle social, e o desenvolvimento de uma cidadania ativa.

PROAGRO - Programa de Garantia de Atividade Agropecuaria: avaliação de seus objetivos na microrregião homogenea de Passo-Fundo - RS

No Brasil nao e raro a criação de Programas pelas autoridades governamentais, para atender. determina da situação conjuntural ou para direcionar os esforços de pro . .' dução a uma atividade específica. Ocorre, porém, na maioria das vezes que não se criam -- simultaneamente ã formulação-instr~ mentos efetivos para sua avaliação e assim, os programas se agigantam e -introdu~em seus próprios mecanismos de de fesa para sua autopreservação. Este trabalho objetiva avaliar um deles --- o PROAGRO - Programa de Garantia da Atividade Agropecuá - ria --- através de uma confrontação entre a visão de seus for muladores e,a dos diversos agentes que atuam na operaciona lização do programa, em uma microrregião homogênea do LB.G. E., constituída pelos segu~ntes municípios: Carazinho, Chap! da, Coronel Bicaco, Palmeira das Missões, Passo Fundo e Santo Augusto, todos situados no Estado do Rio Grande do Sul. Com ênfase nos aspectos de formulação de políticas públicas, este trabalho foi desenvolvido dentro de uma sistemática, cuj as idé"'ias básicas discriminamos a seguir: descrição da importância do PROAGRO e, em virtude dele estar intimamente vinculado ao Sistema Nacional de Crédito Rural, dos objetivos, do desempenho e das disfunções desse Sistema. Como corolário, constata-se que pou cos agricultores têm acesso ao crédito rural institucio na1izado e entre seus beneficiários há uma concentração excessiva dos recursos; - registros dos antecedentes da implantação do seguro agrícola no Brasil, inclusive a experiência frustrada da Companhia Nacional de Seguro Agrícola (1954-1966); - análise do conteúdo formal da política e do desempenho em termos financeiros. ao longo dos se'is primeiros anos de atuação. Em decorrência emerge o fato' de que o programa vem sofrendo constantes déficits e há uma concentração excessiva na utilização de recursos por um tipo de cultura· (trigo) em uma determinada região (Sul); divulgação do resultado da pesquisa-junto aos vários a gentes que atuam no programa e dentre outras conclusões, ·1. constatam-se~indfcios de que o objetivo de auxílio na utilização de tecnologia moderna -- apregoada pelas suas normas -- nãR vem sendo atingido, oco~rendo, em alguns casos, o inverso, ou seja, a acomodação dos agricultores; - descrição dos modelos de seguro agrícola de três ses, Estados Unidos, México e Japão, para fornecer sub sídios ã análise do programa. t marcante a preocupa - ção do governo desses países em manter o programa dentro de critérios exclusivamente técnicos, lastreados em cálculos atuariais para definição dos percentuais de prêmios a serem cobrados; - comparação entre as duas visões descritas e as suges - tões dos modelos de outros países citados. Conclui-se pela necessidade de assegurar ao programa um maior rigor técnico na condução das operações de seguro e com ênfase apenas na forma de administração, propõe-se duas altern~tivas para consolidação do seguro agrícola no Brasil, a saber: 1) o aperfeiçoamento do programa; 2) a transferência gradativa para esfera do Sistema de Seguro Rural, com a vigilância e aporte financeiro do Governo Federal.

Avaliação por pig de perfilagem de danos superfciais nos materiais das paredes de dutos de petróleo

The modern technology of materials and structural integrity of pipelines requests the use of inspection tools named inspection pigs to detect, localize and measure the length, width and depth dimensions of the thickness losses of walls of buried and underwater pipelines in service. These tools run them internally, performing and recording measurements, with performance that varies according to the pig s technology. It has been developed recently an instrumented pig technology, called feller pig. This work aims to indicate factors that influence the feller pig technology performance in the detection and in the accuracy of measurement of the length, width and depth dimensions of the thickness losses on the internal surface of an oil pipeline wall under normal conditions of oil pipe inspection with pig. In this work, is made a collection of factors and an analyses of the technology based on the available literature, as well as an experiment to observe the technology and the factors operating. In the experiment, a feeler pig is used in a pipeline built in carbon steel and in operation that flows petroleum, in witch are observed areas with internal thickness losses occurred naturally. Some of these areas and their dimensions taken by automated ultra-sound scanner are compared with the ones indicated by the feller pig. Based on the data collection, on the analysis and on the experiment, the influence of factors object of this research is discussed. It is concluded that, among these, there are factors related to pipe fabrication tolerances, to wear of pig components, to internal adhesive wear of pipeline, to other pipeline damages and to technology characteristics. Finally, actions are suggested to know better, improve and define the applicability of this technology

Qualidade de sono e qualidade de vida em trabalhadores submetidos a diferentes esquemas de trabalho de uma empresa petroquímica

One of the largest problems of the present time resulting from the economic globalization and the modern technology, of the point of view of the biological rhytms of our organism, it is offering services and production of goods available in 24 o'clock, that it demands organized workers in several work schedules besides the hours of the day. Those schedules cause a series of biopsychosocial consequences in the worker's health, in function of circadian, homeostatic and psychosocial alterations. Accordingly, the aim of this study was to accomplish an evaluation of the effects of several works schedules in the pattern of the sleep wake cycle, anxiety, stress and in the health. We counted with a sample of 274 workers subdivided in 49 daytime worker groups and 225 workers in different shift work schedules with different speeds (rotating shift group, slower day shift group, faster day shift group). From the results analysis it is verified irregularities of the daily activities, stress and alterations in the workers' health in all schedules. It was also verified thata the workers thata presented irregularities in the daily activities were the mroe stressed. On the other hand, the shift works were considered more ansious and associated with bad sleep quality. It was verified that the workers with bad sleep quality were those presented larger levels of dispocional anxiety. There was no statistically significant correlation between bad sleep quality and irregular daily lifestyle. However, it can be affirmed thata shift work schendules doesn't are the main determinant for the circadian alterations, but the answers of the individuals to the shifts work; and that the inadequate behavioural strategies to work with the effects of the shift schedules. In conclusion, individual strategies related to the coping of the work in shift (adaptation and tolerance) should be extolled as indispensable tool in the ergonomic evaluation of the work

Um método para desenvolvimento de abordagens generativas com composição de linguagens específicas de domínio

The software systems development with domain-specific languages has become increasingly common. Domain-specific languages (DSLs) provide increased of the domain expressiveness, raising the abstraction level by facilitating the generation of models or low-level source code, thus increasing the productivity of systems development. Consequently, methods for the development of software product lines and software system families have also proposed the adoption of domain-specific languages. Recent studies have investigated the limitations of feature model expressiveness and proposing the use of DSLs as a complement or substitute for feature model. However, in complex projects, a single DSL is often insufficient to represent the different views and perspectives of development, being necessary to work with multiple DSLs. In order to address new challenges in this context, such as the management of consistency between DSLs, and the need to methods and tools that support the development with multiple DSLs, over the past years, several approaches have been proposed for the development of generative approaches. However, none of them considers matters relating to the composition of DSLs. Thus, with the aim to address this problem, the main objectives of this dissertation are: (i) to investigate the adoption of the integrated use of feature models and DSLs during the domain and application engineering of the development of generative approaches; (ii) to propose a method for the development of generative approaches with composition DSLs; and (iii) to investigate and evaluate the usage of modern technology based on models driven engineering to implement strategies of integration between feature models and composition of DSLs

O ENSAIO DE PIEZOCONE E DE MINICONE NA INVESTIGAÇÃO DO SUBSOLO: ALGUNS EXEMPLOS DE APLICAÇÃO.

O ensaio de penetração do cone elétrico e do piezocone pertence a um grupo de ensaios de campo, cuja utilização vem sendo cada vez mais difundida. Tanto o avanço da eletrônica como a rápida evolução da informática têm proporcionado equipamentos mais apropriados, menores, mais robustos e mais econômicos, permitindo a incorporação de diversos sensores a essa ferramenta de investigação. Isto contribuiu para que esse ensaio se consagrasse para a descrição contínua do perfil geotécnico, a definição do nível de água e para estimativa de parâmetros mecânicos do solo. Neste artigo faz-se uma breve apresentação do piezocone e do minicone elétrico: o primeiro vem sendo utilizado nos últimos anos, especialmente em geotecnia ambiental, e o segundo, na investigação da infra-estrutura de transportes. Apresentam-se e discutem-se exemplos de emprego do piezocone para identificação de regiões do maciço contaminadas e do minicone para detectar a superfície de ruptura de uma seção de um talude de aterro, para avaliar sua estabilidade através de retroanálises. Concluise o trabalho fazendo-se algumas considerações sobre a utilização dessa tecnologia moderna e recente em solos tropicais que ocorrem no Brasil.

Bagging k-dependence probabilistic networks: An alternative powerful fraud detection tool

Fraud is a global problem that has required more attention due to an accentuated expansion of modern technology and communication. When statistical techniques are used to detect fraud, whether a fraud detection model is accurate enough in order to provide correct classification of the case as a fraudulent or legitimate is a critical factor. In this context, the concept of bootstrap aggregating (bagging) arises. The basic idea is to generate multiple classifiers by obtaining the predicted values from the adjusted models to several replicated datasets and then combining them into a single predictive classification in order to improve the classification accuracy. In this paper, for the first time, we aim to present a pioneer study of the performance of the discrete and continuous k-dependence probabilistic networks within the context of bagging predictors classification. Via a large simulation study and various real datasets, we discovered that the probabilistic networks are a strong modeling option with high predictive capacity and with a high increment using the bagging procedure when compared to traditional techniques. (C) 2012 Elsevier Ltd. All rights reserved.

Liquid crystalline cellulose derivatives for mirrorless lasing

In this thesis cholesteric films made of liquid crystalline cellulose derivatives with improved optical properties were prepared. The choice of the solvent, hydrogen bond influencing additives, the synthetic realization of a very high degree of substitution on the cellulosic polymer and the use of mechanical stirring at the upper concentration limit of the liquid crystalline range were the basis for an improved alignment of the applied cellulose tricarbamates. In combination with a tuned substrate treatment and film preparation method, cholesteric films were obtained, with optical properties that were theoretically predicted and only known from low molecular weight liquid crystals so far. Subsequent polymerization allowed a permanent fixing of the alignment and the fabrication of free standing and insensitive films.rnThe incorporation of inorganic nanorods into the cholesteric host material was mediated with tailored block copolymers, available via controlled radical polymerization methods. In addition to the shape match between the rodlike mesogens of the host and the nanorods it was possible to increase the miscibility of both materials. Nevertheless, the size of the nanorods, in comparison to the mesogens, in these densely packed liquid crystalline phases as well as their long equilibration times were the reasons for phase separation. Nanorods are, in principle, valuable substitutes for organics, but their utilization in cellulosic CLC was not to be combined with a high quality alignment of the cholesteric structure.rnA swelling process of polymerized films in a dye solution or dissolving dyes in non-polymerized CLC was used for incorporation of the organic chromophores. With the first method the CLC could be aligned and polymerized without any disturbance due to dye molecules. The optical properties of dye and CLC were matched, with regard to mirrorless lasing devices. The dye was optically excited and laser emission supported by the cholesteric cavity was obtained. The polarization and wavelength of the emitted radiation as well as its bandwidth, the obtained interference pattern and threshold behavior of the emission proofed the feedback mechanism that was not believed to be realizable in liquid crystalline polymers. rnUtilization of a microfluidic co-flow injection device enabled us to transfer the properties of cellulosic CLC from the planar film shape to spherical micrometer sized particles. The pure material yielded particles with distorted mesogen alignment similar to films prepared by capillary flow. Dilution of the CLC with a solvent that migrated into the carrier phase during particle preparation provided the basis for particles with well ordered areas. rnAlthough cellulose derivatives were known for their liquid crystalline behavior for decades and synthesized in mass production, their application as feedback material was affected by bad optical properties. In comparison to low molar mass compounds, the low degree of order in the CLC phase was the cause. With the improved material, defined lasing emission was shown and characterized. Derivatives of cellulose are desirable materials, because, as a renewable resource, they are available in large amounts for a low price and need only simple derivatization reactions. The fabrication of CLC films with tunable lasing emission, for which this thesis can provide a starting point, is in good agreement with today's requirements of modern technology and its miniaturization.rn

Moodle & Co. auf dem Weg zur Personal Learning Environment

Ausgehend von der typischen IT‐Infrastruktur für E‐Learning an Hochschulen auf der einen Seite sowie vom bisherigen Stand der Forschung zu Personal Learning Environments (PLEs) auf der anderen Seite zeigt dieser Beitrag auf, wie bestehende Werkzeuge bzw. Dienste zusammengeführt und für die Anforderungen der modernen, rechnergestützten Präsenzlehre aufbereitet werden können. Für diesen interdisziplinären Entwicklungsprozess bieten sowohl klassische Softwareentwicklungsverfahren als auch bestehende PLE‐Modelle wenig Hilfestellung an. Der Beitrag beschreibt die in einem campusweiten Projekt an der Universität Potsdam verfolgten Ansätze und die damit erzielten Ergebnisse. Dafür werden zunächst typische Lehr‐/Lern‐bzw. Kommunikations‐Szenarien identifiziert, aus denen Anforderungen an eine unterstützende Plattform abgeleitet werden. Dies führt zu einer umfassenden Sammlung zu berücksichtigender Dienste und deren Funktionen, die gemäß den Spezifika ihrer Nutzung in ein Gesamtsystem zu integrieren sind. Auf dieser Basis werden grundsätzliche Integrationsansätze und technische Details dieses Mash‐Ups in einer Gesamtschau aller relevanten Dienste betrachtet und in eine integrierende Systemarchitektur überführt. Deren konkrete Realisierung mit Hilfe der Portal‐Technologie Liferay wird dargestellt, wobei die eingangs definierten Szenarien aufgegriffen und exemplarisch vorgestellt werden. Ergänzende Anpassungen im Sinne einer personalisierbaren bzw. adaptiven Lern‐(und Arbeits‐)Umgebung werden ebenfalls unterstützt und kurz aufgezeigt.