Expression of an Arabidopsis Aspartate Kinase/Homoserine Dehydrogenase Gene Is Metabolically Regulated by Photosynthesis-Related Signals but Not by Nitrogenous Compounds1

Although the control of carbon fixation and nitrogen assimilation has been studied in detail, relatively little is known about the regulation of carbon and nitrogen flow into amino acids. In this paper we report our study of the metabolic regulation of expression of an Arabidopsis aspartate kinase/homoserine dehydrogenase (AK/HSD) gene, which encodes two linked key enzymes in the biosynthetic pathway of aspartate family amino acids. Northern blot analyses, as well as expression of chimeric AK/HSD-β-glucuronidase constructs, have shown that the expression of this gene is regulated by the photosynthesis-related metabolites sucrose and phosphate but not by nitrogenous compounds. In addition, analysis of AK/HSD promoter deletions suggested that a CTTGACTCTA sequence, resembling the binding site for the yeast GCN4 transcription factor, is likely to play a functional role in the expression of this gene. Nevertheless, longer promoter fragments, lacking the GCN4-like element, were still able to confer sugar inducibility, implying that the metabolic regulation of this gene is apparently obtained by multiple and redundant promoter sequences. The present and previous studies suggest that the conversion of aspartate into either the storage amino acid asparagine or aspartate family amino acids is subject to a coordinated, reciprocal metabolic control, and this biochemical branch point is a part of a larger, coordinated regulatory mechanism of nitrogen and carbon storage and utilization.

Multiple tissue-specific promoters control expression of the murine tartrate-resistant acid phosphatase gene

Tartrate-resistant acid phosphatase (TRAP) is highly expressed in osteoclasts and in a subset of tissue macrophages and dendritic cells. It is expressed at lower levels in the parenchymal cells of the liver, glomerular mesangial cells of the kidney and pancreatic acinar cells. We have identified novel TRAP mRNAs that differ in their 5-untranslated region (5'-UTR) sequence, but align with the known murine TRAP mRNA from the first base of Exon 2. The novel 5'-UTRs represent alternative first exons located upstream of the known 5'-UTR. A similar genomic structure exists for the human TRAP gene with partial conservation of the exon and promoter sequences. Expression of the most distal 5'-UTR (Exon 1A) is restricted to adult bone and spleen tissue. Exon 1B is expressed primarily in tissues containing TRAP-positive nonhaematopoietic cells. The known TRAP 5'-UTR (Exon 1) is expressed in tissues characteristic of myeloid cell expression. In addition the Exon 1C promoter sequence is shown to comprise distinct transcription start regions, with an osteoclast-specific transcription initiation site identified downstream of a TATA-like element. Macrophages are shown to initiate transcription of the Exon 1C transcript from a purine-rich region located upstream of the osteoclast-specific transcription start point. The distinct expression patterns for each of the TRAP 5'-UTRs suggest that TRAP mRNA expression is regulated by the use of four alternative tissue- and cell-restricted promoters. (C) 2003 Elsevier Science B.V. All rights reserved.

Identification of functional sequences in the pregenomic RNA promoter of the Banana streak virus Cavendish strain (BSV-Cav)

The promoter regions of plant pararetroviruses direct transcription of the full-length viral genome into a pregenomic RNA that is an intermediate in the replication of the virus. It serves as template for reverse transcription and as polycistronic mRNA for translation to viral proteins. We have identified functional promoter elements in the intergenic region of the Cavendish isolate of Banana streak virus (BSV-Cav), a member of the genus Badnavirus. Potential binding sites for plant transcription factors were found both upstream and downstream of the transcription start site by homology search in the PLACE database of plant cis-acting elements. The functionality of these putative cis-acting elements was tested by constructing loss-of-function and regain-of-function mutant promoters whose activity was quantified in embryogenic sugarcane suspension cells. Four regions that are important for activity of the BSV-Cav promoter were identified: the region containing an as-l-like element, the region around-141 and down to -77, containing several putative transcription factor binding sites, the region including the CAAT-box, and the leader region. The results could help explain the high BSV-Cav promoter activity that was observed previously in transgenic sugarcane plants and give more insight into the plant cell-mediated replication of the viral genome in banana streak disease. (C) 2004 Elsevier B.V. All rights reserved.

Genomic diversity of Lactobacillus salivarius

Lactobacillus salivarius is unusual among the lactobacilli due to its multireplicon genome architecture. The circular megaplasmids harboured by L. salivarius strains encode strain-specific traits for intestinal survival and probiotic activity. L. salivarius strains are increasingly being exploited for their probiotic properties in humans and animals. In terms of probiotic strain selection, it is important to have an understanding of the level of genomic diversity present in this species. Comparative genomic hybridization (CGH) and multilocus sequence typing (MLST) were employed to assess the level of genomic diversity in L. salivarius. The wellcharacterised probiotic strains L. salivarius UCC118 was employed as a genetic reference strain. The group of test strains were chosen to reflect the range of habitats from which L. salivarius strains are frequently recovered, including human, animal, and environmental sources. Strains of L. salivarius were found to be genetically diverse when compared to the UCC118 genome. The most conserved strains were human GIT isolates, while the greatest level of divergence were identified in animal associated isolates. MLST produced a better separation of the test strains according to their isolation origins, than that produced by CGHbased strain clustering. The exopolysaccharide (EPS) associated genes of L. salivarius strains were found to be highly divergent. The EPS-producing phenotype was found to be carbonsource dependent and inversely related to a strain's ability to produce a biofilm. The genome of the porcine isolate L. salivarius JCM1046 was shown by sequencing to harbour four extrachromosomal replicons, a circular megaplasmid (pMP1046A), a putative chromid (pMP1046B), a linear megaplasmid (pLMP1046) and a smaller circular plasmid (pCTN1046) which contains an integrated Tn916-like element (Tn6224), which carries the tetracycline resistance gene tetM. pLMP1046 represents the first sequence of a linear plasmid in a Lactobacillus species. Dissemination of antibiotic resistance genes among species with food or probiotic-association is undesirable, and the identification of Tn6224-like elements in this species has implications for strain selection for probiotic applications. In summary, this thesis used a comparative genomics approach to examine the level of genotypic diversity in L. salivarius, a species which contains probiotic strains. The genome sequence of strain JCM1046 provides additional insight into the spectrum of extrachromosomal replicons present in this species.

Testing the universality of free fall with rubidium and ytterbium in a very large baseline atom interferometer

We propose a very long baseline atom interferometer test of Einstein's equivalence principle (EEP) with ytterbium and rubidium extending over 10m of free fall. In view of existing parametrizations of EEP violations, this choice of test masses significantly broadens the scope of atom interferometric EEP tests with respect to other performed or proposed tests by comparing two elements with high atomic numbfers. In the first step, our experimental scheme will allow us to reach an accuracy in the Eotvos ratio of 7 . 10(-13). This achievement will constrain violation scenarios beyond our present knowledge and will represent an important milestone for exploring a variety of schemes for further improvements of the tests as outlined in the paper. We will discuss the technical realisation in the new infrastructure of the Hanover Institute of Technology (HITec) and give a short overview of the requirements needed to reach this accuracy. The experiment will demonstrate a variety of techniques, which will be employed in future tests of EEP, high-accuracy gravimetry and gravity gradiometry. It includes operation of a force-sensitive atom interferometer with an alkaline earth-like element in free fall, beam splitting over macroscopic distances and novel source concepts.

The Vi element. A transposon-like repeated DNA sequence interspersed in the vitellogenin locus of Xenopus laevis.

A repeated DNA element in Xenopus laevis is described that is present in about 7500 copies dispersed throughout the genome. It was first identified in the 5' flanking region of one vitellogenin gene and was therefore named the Vi element. Seven copies are present within the vitellogenin gene region, three of them within introns of the genes A1, A2 and B2, and the other four copies in the gene flanking regions. Four of these copies have been sequenced. The Vi element is bounded by a well-conserved 13 base-pair inverted repeat; in addition, it is flanked by a three base-pair direct repeat that appears to be site-specific. The length of these four copies varies from 112 to 469 base-pairs; however, sequence homology between the different copies is very high. Their structural characteristics suggest that length heterogeneity may have arisen by either unequal recombinations, deletions or tandem duplications. Altogether, the characteristics and properties of the Vi element indicate that it might represent a mobile genetic element. One of the four copies sequenced is inserted close (position -535) to the transcription initiation site of the vitellogenin gene B2 in a region otherwise showing considerable homology with the closely related gene B1. Nevertheless, the presence of the Vi element does not seem to influence significantly the estrogen-controlled expression of gene B2. In addition, three alleles of this gene created by length polymorphism in intron 3 and in the Vi element inserted near the transcription initiation site are described.

Sequence analysis and distribution of an IS3-like insertion element isolated from Salmonella enteritidis

The nucleotide sequence of a 3 kb region immediately upstream of the sef operon operon of Salmonella enteritidis was determined. A 1230 base pair insertion sequence which shared sequence identity (> 75%) with members of the IS3 family was revealed. This element, designated IS1230, had almost identical (90% identity) terminal inverted repeats to Escherichia coli IS3 but unlike other IS3-like sequences lacked the two characteristic open reading frames which encode the putative transposase. S. enteritidis possessed only one copy of this insertion sequence although Southern hybridisation analysis of restriction digests of genomic DNA revealed another fragment located in a region different from the sef operon which hybridised weakly which suggested the presence of an IS1230 homologue. The distribution of IS1230 and IS1230-like elements was shown to be widespread amongst salmonellas and the patterns of restriction fragments which hybridised differed significantly between Salmonella serotypes and it is suggested that IS1230 has potential for development as a differential diagnostic tool.

Estudos estruturais do precursor dos peptídeos potenciadores de Bradicinina e da proteína nudel: nuclear distribution element-like

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Expressão, purificação e estudos estruturais da chaperona molecular Hsp65 de Mycobacterium leprae & caracterização da proteína NUDEL - nuclear distribuition element-like

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification and characterization of ISXax2, a TN3-like transposable element potentially related with the virulence and pathogenicity of Xanthomonas citri subsp. citri

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Two sterol regulatory element-like sequences mediate up-regulation of caveolin gene transcription in response to low density lipoprotein free cholesterol

Caveolae form the terminus for a major pathway of intracellular free cholesterol (FC) transport. Caveolin mRNA levels in confluent human skin fibroblasts were up-regulated following increased uptake of low density lipoprotein (LDL) FC. The increase induced by FC was not associated with detectable change in mRNA stability, indicating that caveolin mRNA levels were mediated at the level of gene transcription. A total of 924 bp of 5′ flanking region of the caveolin gene were cloned and sequenced. The promoter sequence included three G+C-rich potential sterol regulatory elements (SREs), a CAAT sequence and a Sp1 consensus sequence. Deletional mutagenesis of individual SRE-like sequences indicated that of these two (at −646 and −395 bp) were essential for the increased transcription rates mediated by LDL-FC, whereas the third was inconsequential. Gel shift analysis of protein binding from nuclear extracts to these caveolin promoter DNA sequences, together with DNase I footprinting, confirmed nucleoprotein binding to the SRE-like elements as part of the transcriptional response to LDL-FC. A supershift obtained with antibody to SRE-binding protein 1 (SPEBP-1) indicated that this protein binds at −395 bp. There was no reaction at −395 bp with anti-Sp1 antibody nor with either antibody at −646 bp. The cysteine protease inhibitor N-acetyl-leu-leu-norleucinal (ALLN), which inhibits SREBP catabolism, superinhibited caveolin mRNA levels regardless of LDL-FC. This finding suggests that SREBP inhibits caveolin gene transcription in contrast to its stimulating effect on other promoters. The findings of this study are consistent with the postulated role for caveolin as a regulator of cellular FC homeostasis in quiescent peripheral cells, and the coordinate regulation by SREBP of FC influx and efflux.

Sequence analysis and distribution of an IS3-like insertion element isolated from Salmonella enteritidis

The nucleotide sequence of a 3 kb region immediately upstream of the sef operon of Salmonella enteritidis was determined. A 1230 base pair insertion sequence which shared sequence identity (> 75%) with members of the IS3 family was revealed. This element, designated IS1230, had almost identical (90% identity) terminal inverted repeats to Escherichia coli IS3 but unlike other IS3-like sequences lacked the two characteristic open reading frames which encode the putative transposase. S. enteritidis possessed only one copy of this insertion sequence although Southern hybridisation analysis of restriction digests of genomic DNA revealed another fragment located in a region different from the sef operon which hybridised weakly which suggested the presence of an IS1230 homologue. The distribution of IS1230 and IS1230-like elements was shown to be widespread amongst salmonellas and the patterns of restriction fragments which hybridised differed significantly between Salmonella serotypes and it is suggested that IS1230 has potential for development as a differential diagnostic tool.

Finite Element Modeling of Spiral Frequency Steerable Acoustic Transducers (FSATs) for guided waves based Structural Health Monitoring of plate-like structures

Structural Health Monitoring (SHM) is an emerging area of research associated to improvement of maintainability and the safety of aerospace, civil and mechanical infrastructures by means of monitoring and damage detection. Guided wave structural testing method is an approach for health monitoring of plate-like structures using smart material piezoelectric transducers. Among many kinds of transducers, the ones that have beam steering feature can perform more accurate surface interrogation. A frequency steerable acoustic transducer (FSATs) is capable of beam steering by varying the input frequency and consequently can detect and localize damage in structures. Guided wave inspection is typically performed through phased arrays which feature a large number of piezoelectric transducers, complexity and limitations. To overcome the weight penalty, the complex circuity and maintenance concern associated with wiring a large number of transducers, new FSATs are proposed that present inherent directional capabilities when generating and sensing elastic waves. The first generation of Spiral FSAT has two main limitations. First, waves are excited or sensed in one direction and in the opposite one (180 ̊ ambiguity) and second, just a relatively rude approximation of the desired directivity has been attained. Second generation of Spiral FSAT is proposed to overcome the first generation limitations. The importance of simulation tools becomes higher when a new idea is proposed and starts to be developed. The shaped transducer concept, especially the second generation of spiral FSAT is a novel idea in guided waves based of Structural Health Monitoring systems, hence finding a simulation tool is a necessity to develop various design aspects of this innovative transducer. In this work, the numerical simulation of the 1st and 2nd generations of Spiral FSAT has been conducted to prove the directional capability of excited guided waves through a plate-like structure.

A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics

In this study, a finite element (FE) framework for the analysis of the interplay between buckling and delamination of thin layers bonded to soft substrates is proposed. The current framework incorporates the following modeling features: (i) geometrically nonlinear solid shell elements, (ii) geometrically nonlinear cohesive interface elements, and (iii) hyperelastic material constitutive response for the bodies that compose the system. A fully implicit Newton–Raphson solution strategy is adopted to deal with the complex simultaneous presence of geometrical and material nonlinearities through the derivation of the consistent FE formulation. Applications to a rubber-like bi-material system under finite bending and to patterned stiff islands resting on soft substrate for stretchable solar cells subjected to tensile loading are proposed. The results obtained are in good agreement with benchmark results available in the literature, confirming the accuracy and the capabilities of the proposed numerical method for the analysis of complex three-dimensional fracture mechanics problems under finite deformations.