78 resultados para MS2
Resumo:
Air quality is an increasing concern of the European Union, local authorities, scientists and most of all inhabitants that become more aware of the quality of the surrounding environment. Bioaerosols may be consisted of various elements, and the most important are pollen grains, fungal spores, bacteria, viruses. More than 100 genera of fungal spores have been identified as potential allergens that cause immunological response in susceptible individuals. Alternaria and Cladosporium have been recognised as the most important fungal species responsible for respiratory tract diseases, such as asthma, eczema, rhinitis and chronic sinusitis. While a lot of attention has been given to these fungal species, a limited number of studies can be found on Didymella and Ganoderma, although their allergenic properties were proved clinically. Monitoring of allergenic fungal spore concentration in the air is therefore very important, and in particular at densely populated areas like Worcester, UK. In this thesis a five year spore data set was presented, which was collected using a 7-day volumetric spore trap, analysed with the aid of light microscopy, statistical tests and geographic information system techniques. Although Kruskal-Wallis test detected statistically significant differences between annual concentrations of all examined fungal spore types, specific patterns in their distribution were also found. Alternaria spores were present in the air between mid-May/mid-June until September-October with peak occurring in August. Cladosporium sporulated between mid-May and October, with maximum concentration recorded in July. Didymella spores were seen from June/July up to September, while peaks were found in August. Ganoderma produced spores for 6 months (May-October), and maximum concentration could be found in September. With respect to diurnal fluctuations, Alternaria peaked between 22:00h and 23:00h, Cladosporium 13:00-15:00h, Didymella 04:00-05:00h and 22:00h-23:00h and Ganoderma from 03:00h to 06:00h. Spatial analysis showed that sources of all fungal species were located in England, and there was no evidence for a long distance transport from the continent. The maximum concentration of spores was found several hours delayed in comparison to the approximate time of the spore release from the crops. This was in agreement with diurnal profiles of the spore concentration recorded in Worcester, UK. Spores of Alternaria, Didymella and Ganoderma revealed a regional origin, in contrast to Cladosporium, which sources were situated locally. Hence, the weather conditions registered locally did not exhibit strong statistically significant correlations with fungal spore concentrations. This has had also an impact on the performance of the forecasting models. The best model was obtained for Cladosporium with 66% of the accuracy.
Resumo:
The synthesis of cDNA from RNA is challenging due to the inefficiency of reverse transcription (RT). In order to address this, a method was developed known as RT-Bst for sequential RT of RNA and Bst DNA polymerase amplification for enrichment of cDNA in a single tube reaction. Using genomic RNA from bacteriophage MS2, the yield of cDNA produced by RT alone and RT-Bst were compared by analysis of PCR-amplified products. Using random primers a superior performance was observed when amplifying MS2 RNA following RT-Bst compared to RT alone, indicating that greater quantities of cDNA were present after RT-Bst. RT-Bst was also compared with RT alone for their relative ability to produce sufficient cDNA to amplify 8 target regions spanning the respiratory syncytial virus (RSV) genome. Six out of 8 targets were amplified consistently by PCR subsequent to RT-Bst amplification whereas only 3 out of 8 targets could be amplified after RT alone. RSV sequences were selectively amplified using RSV specific primers from a mixed template containing an excess of MS2 RNA in a RT-Bst reaction without amplifying MS2 sequences. This suggests that RT-Bst can be used to amplify RNA sequences non-specifically using random primers and specifically using sequence specific primers and enhances the yield of cDNA when compared to RT alone.
Resumo:
The importance of hand hygiene in reducing the spread of pathogens has been long established and this has been highlighted recently in initiatives such as the NHS’s ‘clean your hands’ campaign. However, much of the focus on hand hygiene has concerned effective hand washing; there has been less emphasis on hand drying and its role in hygienic practices. This study aimed to compare three hand drying methods namely paper towels, a warm air dryer and a jet air dryer for their relative ability to disseminate virus particles into the washroom environment during hand drying. A bacteriophage model was used to compare these methods; hands were artificially contaminated with MS2 phage and dried using each device. Both air sampling and contact plates were assessed and a plaque assay was used to quantify virus dissemination. Samples were collected at set times, heights, angles and distances around each device. Both air sampling and contact plate results indicated that the jet air dryer produced significantly more virus dispersal than either paper towels or the warm air dryer in terms of quantity, distance travelled and the time spent circulating in the air around the device and potentially in the washroom environment.
Resumo:
Background World Health Organization hand hygiene guidelines state that if electric hand dryers are used, they should not aerosolize pathogens. Previous studies have investigated the dispersal by different hand-drying devices of chemical indicators, fungi and bacteria on the hands. This study assessed the aerosolization and dispersal of virus on the hands to determine any differences between hand-drying devices in their potential to contaminate other occupants of public washrooms and the washroom environment. Methods A suspension of MS2, an Escherichia coli bacteriophage virus, was used to artificially contaminate the hands of participants prior to using three different handdrying devices: jet air dryer, warm air dryer, paper towel dispenser. Virus was detected by plaque formation on agar plates layered with the host bacterium. Vertical dispersal of virus was assessed at a fixed distance (0.4 m) and over a range of different heights (0.0 – 1.8 m) from the floor. Horizontal dispersal was assessed at different distances of up to three metres from the hand-drying devices. Virus aerosolization and dispersal was also assessed at different times up to 15 minutes after use by means of air sampling at two distances (0.1 and 1.0 m) and at a distance behind and offset from each of the hand-drying devices. Results Over a range of heights, the jet air dryer was shown to produce over 60 times greater vertical dispersal of virus from the hands than a warm air dryer and over 1300 times greater than paper towels; the maximum being detected between 0.6 and 1.2 metres from the floor. Horizontal dispersal of virus by the jet air dryer was over 20 times greater than a warm air dryer and over 190 times greater than paper towels; virus being detected at distances of up to three metres. Air sampling at three different positions from the hand-drying devices 15 minutes after use showed that the jet air dryer produced over 50-times greater viral contamination of the air than a warm air dryer and over 110-times greater than paper towels. Conclusions Due to their high air speed, jet air dryers aerosolize and disperse more virus over a range of heights, greater distances, and for longer times than other hand drying devices. If hands are inadequately washed, they have a greater potential to contaminate other occupants of a public washroom and the washroom environment. Main messages: Jet air dryers with claimed air speeds of over 600 kph have a greater potential than warm air dryers or paper towels to aerosolize and disperse viruses on the hands of users. The choice of hand-drying device should be carefully considered. Jet air dryers may increase the risk of transmission of human viruses, such as norovirus, particularly if hand washing is inadequate.
Resumo:
Aims To use a MS2 bacteriophage model to compare three hand-drying methods, paper towels (PT), a warm air dryer (WAD) and a jet air dryer (JAD), for their potential to disperse viruses and contaminate the immediate environment during use. Methods and Results Participants washed their gloved hands with a suspension of MS2 bacteriophage and hands were dried with one of the three hand-drying devices. The quantity of MS2 present in the areas around each device was determined using a plaque assay. Samples were collected from plates containing the indicator strain, placed at varying heights and distances and also from the air. Over a height range of 0.15-1.65 m, the JAD dispersed an average of >60 and >1300-fold more plaque-forming units (pfu) compared to the WAD and PT (P <0.0001), respectively. The JAD dispersed an average of >20 and >190-fold more pfu in total compared to WAD and PT at all distances tested up to 3 m (P <0.01), respectively. Air samples collected around each device 15 minutes after use indicated that the JAD dispersed an average of >50 and >100-fold more pfu compared to the WAD and PT (P <0.001), respectively. Conclusions Use of the JAD lead to significantly greater and further dispersal of MS2 bacteriophage from artificially contaminated hands when compared to the WAD and PT. Significance and Impact of Study The choice of hand drying device should be considered carefully in areas where infection prevention concerns are paramount, such as healthcare settings and the food industry.
Resumo:
Background World Health Organization and EU hand hygiene guidelines state that if electric hand dryers are used, they should not aerosolize pathogens. Previous studies have investigated the dispersal by different hand-drying devices of chemical indicators, fungi and bacteria on the hands. This study assessed the aerosolization and dispersal of virus on the hands to determine any differences between hand-drying devices in their potential to contaminate other occupants of public washrooms and the washroom environment. Methods A suspension of MS2, an Escherichia coli bacteriophage virus, was used to artificially contaminate the hands of participants prior to using three different hand-drying devices: jet air dryer, warm air dryer, paper towel dispenser. Virus was detected by plaque formation on agar plates layered with the host bacterium. Vertical dispersal of virus was assessed at a fixed distance (0.4 m) and over a range of different heights (0.0 – 1.8 m) from the floor. Horizontal dispersal was assessed at different distances of up to three metres from the hand-drying devices. Virus aerosolization and dispersal was also assessed at different times up to 15 minutes after use by means of air sampling at two distances (0.1 and 1.0 m) and at a distance behind and offset from each of the hand-drying devices. Results Over a range of heights, the jet air dryer was shown to produce over 60 times greater vertical dispersal of virus from the hands than a warm air dryer and over 1300 times greater than paper towels; the maximum being detected between 0.6 and 1.2 metres from the floor. Horizontal dispersal of virus by the jet air dryer was over 20 times greater than a warm air dryer and over 190 times greater than paper towels; virus being detected at distances of up to three metres. Air sampling at three different positions from the hand-drying devices 15 minutes after use showed that the jet air dryer produced over 50-times greater viral contamination of the air than a warm air dryer and over 110-times greater than paper towels. Conclusions Due to their high air speed, jet air dryers aerosolize and disperse more virus over a range of heights, greater distances, and for longer times than other hand drying devices. If hands are inadequately washed, they have a greater potential to contaminate other occupants of a public washroom and the washroom environment. Main messages: Jet air dryers with claimed air speeds of over 600 kph have a greater potential than warm air dryers or paper towels to aerosolize and disperse viruses on the hands of users. The choice of hand-drying device should be carefully considered. Jet air dryers may increase the risk of transmission of human viruses, such as norovirus, particularly if hand washing is inadequate.
Resumo:
Le contrôle de la longueur des télomères est une étape critique régissant le potentiel réplicatif des cellules eucaryotes. A cause du problème de fin de réplication, les chromosomes raccourcissent à chaque cycle de division. Ce raccourcissement se produit dans des séquences particulières appelées télomères. La longueur des télomères est en relation directe avec les capacités prolifératives des cellules et est responsable de la limite de division de Hayflick. Cependant, dans certains types cellulaires et dans plus de 90% des cancers, la longueur des télomères va être maintenue par une enzyme spécialisée appelée télomérase. Encore aujourd’hui, comprendre la biogénèse de la télomérase et savoir comment elle est régulée reste un élément clé dans la lutte contre le cancer. Depuis la découverte de cette enzyme en 1985, de nombreux facteurs impliqués dans sa maturation ont été identifiés. Cependant, comment ces facteurs sont intégrés dans le temps et dans l’espace, afin de produire une forme active de la télomérase, est une question restée sans réponse. Dans ce projet, nous avons utilisé la levure Saccharomyces cerevisiæ comme modèle d’étude des voies de biogénèse et de trafic intracellulaire de l’ARN de la télomérase, en condition endogène. La première étape de mon travail fut d’identifier les facteurs requis pour l’assemblage et la localisation de la télomérase aux télomères en utilisant des techniques d’Hybridation In Situ en Fluorescence (FISH). Nous avons pu montrer que la composante ARN de la télomérase fait la navette entre le noyau et le cytoplasme, en condition endogène, dans les cellules sauvages. Nos travaux suggèrent que ce trafic sert de contrôle qualité puisqu’un défaut d’assemblage de la télomérase conduit à son accumulation cytoplasmique et prévient donc sa localisation aux télomères. De plus, nous avons identifié les voies d’import/export nucléaire de cet ARN. Dans une deuxième approche, nous avons réussi à développer une méthode de détection des particules télomérasiques in vivo en utilisant le système MS2-GFP. Notre iv étude montre que contrairement à ce qui a été précédemment décrit, la télomérase n’est pas associée de façon stable aux télomères au cours du cycle cellulaire. En fin de phase S, au moment de la réplication des télomères, la télomérase se regroupe en 1 à 3 foci dont certains colocalisent avec les foci télomériques, suggérant que nous visualisons la télomérase active aux télomères in vivo. La délétion des gènes impliqués dans l’activation et le recrutement de la télomérase aux télomères entraine une forte baisse dans l’accumulation des foci d’ARN au sein de la population cellulaire. Nos résultats montrent donc pour la première fois la localisation endogène de l’ARN TLC1 in situ et in vivo et propose une vue intégrée de la biogenèse et du recrutement de la télomérase aux télomères.
Resumo:
Please find the referenced videos attached
Resumo:
Während der Spermatogenese von Drosophila werden viele mRNAs zwar vor der Meiose transkribiert, dann aber durch Komplexbildung mit Proteinen stillgelegt und erst am Ende der Spermienentwicklung durch Veränderung desselben für die Translation freigegeben. Ein Beispiel hierfür ist die Mst87F mRNA. Während das cis-agierende Sequenzelement in der RNA seit langem bekannt ist, gestaltete sich die Suche nach den trans-agierenden RNA-bindenden Proteinen schwierig. In meiner Diplomarbeit (Stinski, 2007) waren mithilfe von präparativen Shift-Experimenten (Auftrennung von RNP-Komplexen im elektrischen Feld) zwei vielversprechende Kandidaten identifiziert worden, die Proteine Exuperantia (Exu) und Purity of Essence (Poe). Ziel der vorliegenden Dissertation war zum einen die Aufklärung der Funktion dieser Kandidatenproteine und zum anderen die Identifizierung weiterer Kandidaten, die an der Komplexbildung und damit an der Regulation beteiligt sind. Dabei war die Hoffnung, sowohl Proteine zu finden, die die Repression vermitteln, als auch solche, die am Ende die Aktivierung ermöglichen. Durch eine Affinitätsreinigung, in der Mst87F-RNA mit einem ms2-Tag versehen über das MS2-Maltose binding protein an eine Amylose-Matrix gebunden und schließlich die Komplexe mit Maltose wieder eluiert wurden, ließen sich erneut das Exu-Protein und drei neue Kandidaten identifizieren: CG3213, CG12470 und CG1898. Das Protein Exu hat eindeutig eine Funktion bei der Translationskontrolle: seine Abwesenheit führt zum Abbau der kontrollierten mRNAs. Die Inkubation mit exu-defizientem Protein-Extrakt (aus Hoden) unterstützt keine RNP-Komplexbildung und aufgereinigtes Exu-His Fusionsprotein kann auch nicht direkt an die Mst87F mRNA binden. Ein exu-defizienter Proteinextrakt lässt sich aber durch die Zugabe von rekombinantem Exu-His komplettieren und es entsteht wieder ein starker mRNP-Komplex. Dies beweist, dass das Experiment im Prinzip korrekt verläuft und dass Exu für die Komplexbildung entscheidend ist. Darüber hinaus konnten durch eine Co-Immunpräzipitation mit dem Exu-GFP Fusionsprotein sowohl interagierende Proteine als auch in die RNP-Komplexe einbezogene mRNAs nachgewiesen werden. Vielversprechende Kandidatenproteine stammen von den Genen CG3213, dfmr1 und CG12470. Die durch cDNA-Synthese in den Komplexen nachgewiesenen mRNAs sind in aller Regel solche, die der Translationskontrolle unterworfen sind. Damit ist gezeigt, dass Exu Teil eines großen Proteinkomplexes ist oder zumindest mit ihm assoziiert ist, der auf viele translationskontrollierte Transkripte Einfluss nimmt. Die Mst87F mRNA wird zum Zeitpunkt der Translationsaktivierung sekundär polyadenyliert, das heißt ihre Länge wird größer und heterogen. In einer Mutante für das Kandidatengen poe wurde diese sekundäre Polyadenylierung plötzlich nicht mehr beobachtet und die RNA blieb auch bei Translationsaktivierung so groß wie in den frühen Stadien. So ergab sich die Möglichkeit, endlich zu prüfen, ob die sekundäre Polyadenylierung für die Translationsaktivierung von essentieller Bedeutung ist. Eine Serie von Fusionskonstrukten mit funktionstüchtigem TCE verhielten sich alle gleich. Die sekundäre Polyadenylierung fand nicht statt, aber das Transkript des Fusionsgens wurde zum richtigen Zeitpunkt translatiert. Somit ist dieser Prozess zumindest nicht generell für eine Translation zu diesem späten Zeitpunkt in der Spermiogenese notwendig. Ein quantitativer Effekt kann allerdings nicht ausgeschlossen werden. Des Weiteren konnten mit antisense Konstrukten mutante Phänotypen erzeugt werden. Solche Männchen waren ausnahmslos steril, was die Wichtigkeit des Proteins Poe für den Prozess der Spermienreifung belegt. Die Defekte zeigen sich spät während der Individualisierung, was mit der vermuteten Funktion übereinstimmen würde. Das Kandidatenprotein dFMR1 bindet allein an die Mst87F RNA und trägt zur Stärke des beobachtbaren Komplexes bei. Die Komplexbildung zeigt Salzabhängigkeit, wie sie für dFMR1 in anderen Zusammenhängen dokumentiert wurde. Dies unterstützt die obige Aussage und suggeriert, dass dFMR1 die Basis für den Komplexaufbau bildet. Das CPEB-homologe Kandidatenprotein Orb2 bindet ebenfalls allein an die Mst87F mRNA, hat aber keinen Einfluss auf die Repression oder die sekundäre Polyadenylierung. Eine Beteiligung an der Regulation wäre demnach eindeutig unterschiedlich zu der in anderen Fällen dokumentierten Rolle. Die Expression der Kandidatengene CG1898, CG3213 und CG12470 ist konform mit einer unterschiedlichen Beteiligung an der Translationskontrolle. Das erste Protein ist nur in prämeiotischen Stadien, das zweite durchgängig und das dritte nur in postmeiotischen Stadien nachzuweisen, was einer Funktion bei der Stillegung, während der gesamten inaktiven Phase bzw. bei der Aktivierung entsprechen könnte. Die verschiedenen Experimente identifizieren in mehreren Fällen die gleichen Kandidatenproteine und untermauern damit deren Bedeutung. Sie lassen vielfach konkrete Schlüsse auf die Art der Interaktionen zu, welche in einem Schema zusammengefasst werden.
Resumo:
This paper describes the preparation of new adsorbents derived from sugarcane bagasse and wood sawdust (Manilkara sp.) to remove zinc (II) ions from electroplating wastewater. The first part deals with the chemical modification of sugarcane bagasse and wood sawdust, using succinic anhydride to introduce carboxylic acid functions into the material. The obtained materials (modified sugarcane bagasse MB2 and modified wood sawdust MS2) were then characterized by infrared spectroscopy (IR) and used in adsorption experiments. The adsorption experiments evaluates Zn(2+) removal from aqueous single metal solution and real electroplating wastewater on both batch and continuous experiments using fixed-bed columns prepared in laboratorial scale with the obtained adsorbents. Adsorption isotherms were then developed using Langmuir model and the Thomas kinetic model. The calculated Zn(2+) adsorption capacities were found to be 145 mg/g for MS2 and 125 mg/g for MB2 in single metal aqueous solution, whereas for the industrial wastewater these values were 61 mg/g for MS2 and 55 mg/g for MB2.
Resumo:
Sofrito is a key component of the Mediterranean diet, a diet that is strongly associated with a reduced risk of cardiovascular events. In this study, different Mediterranean sofritos were analysed for their content of polyphenols and carotenoids after a suitable work-up extraction procedure using liquid chromatography/electrospray ionisation-linear ion trap quadrupole-Orbitrap-mass spectrometry (LC/ESI-LTQ-Orbitrap- MS) and liquid chromatography/electrospray ionisation tandem triple quadrupole mass spectrometry (LC/ESI-MS-MS). In this way, 40 polyphenols (simple phenolic and hydroxycinnamoylquinic acids, and flavone, flavonol and dihydrochalcone derivatives) were identified with very good mass accuracy (<2 mDa), and confirmed by accurate mass measurements in MS and MS2 modes. The high-resolution MS analyses revealed the presence of polyphenols never previously reported in Mediterranean sofrito. The quantification levels of phenolic and carotenoid compounds led to the distinction of features among different Mediterranean sofritos according to the type of vegetables (garlic and onions) or olive oil added for their production. © 2013 Elsevier Ltd. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Contextualização:Ações concêntricas apresentam maior estresse cardiovascular quando comparadas às excêntricas. Entretanto, não se sabe a influência desses tipos de ações no comportamento da modulação autonômica cardíaca durante o processo de recuperação pós-esforço.Objetivo:Comparar o efeito de um treinamento resistido para o grupo extensor do joelho realizado com ênfase concêntrica vs excêntrica sobre a força muscular e a recuperação pós-exercício considerando índices de variabilidade de frequência cardíaca (VFC) em jovens saudáveis.Método:Cento e cinco homens, com idades entre 18 e 30 anos, foram randomizados em quatro grupos: controle concêntrico (CCONC), controle excêntrico (CEXC), treinamento concêntrico (TCONC) e treinamento excêntrico (TEXC). Os grupos CCONC e CEXC realizaram uma sessão de exercício reduzido (ER) para o grupo extensor do joelho [três séries de uma repetição a 100% de uma repetição máxima (1RM)], e os grupos TCONC e TEXC realizaram dez sessões de treinamento. A VFC foi analisada no momento basal e na recuperação após as sessões (T1, T2, T3 e T4).Resultados:Observou-se aumento da força muscular para o grupo TEXC. Em relação à modulação autonômica cardíaca, observou-se, em comparação ao momento basal, aumento dos índices SDNN e SD2 no momento T1 nos grupos CCONC e CEXC e aumento dos índices RMSSD, SD1 e AF (ms2) nos momentos T1, T2 e T4 no grupo TEXC.Conclusões:Conclui-se que o treinamento resistido realizado com ênfase em contrações excêntricas promoveu ganho de força e aumento da modulação vagal cardíaca durante o processo de recuperação em relação à condição basal.