Topological design and modulation strategy for buck-boost three-level inverters

To date, designed topologies for DC-AC inversion with both voltage buck and boost capabilities are mainly focused on two-level circuitries with extensions to three-level possibilities left nearly unexplored. Contributing to this area of research, this paper presents the design of a number of viable buck-boost three-level inverters that can also support bidirectional power conversion. The proposed front-end circuitry is developed from the Cuk-derived buck-boost two-level inverter, and by using the ldquoalternative phase opposition dispositionrdquo modulation scheme, the buck-boost three-level inverters can perform distinct five-level line voltage and three-level phase voltage switching by simply controlling the active switches located in the designed voltage boost section of the circuits. As a cost saving option, one active switch can further be removed from the voltage boost section of the circuits by simply rerouting the gating commands of the remaining switches without influencing the AC output voltage amplitude. To verify the validity of the proposed inverters, MATLAB/PLECS simulations were performed before a laboratory prototype was implemented for experimental testing.

Performance evaluation of three-level Z-source inverters under semiconductor-failure conditions

This paper evaluates and proposes various compensation methods for three-level Z-source inverters under semiconductor-failure conditions. Unlike the fault-tolerant techniques used in traditional three-level inverters, where either an extra phase-leg or collective switching states are used, the proposed methods for three-level Z-source inverters simply reconfigure their relevant gating signals so as to ride-through the failed semiconductor conditions smoothly without any significant decrease in their ac-output quality and amplitude. These features are partly attributed to the inherent boost characteristics of a Z-source inverter, in addition to its usual voltage-buck operation. By focusing on specific types of three-level Z-source inverters, it can also be shown that, for the dual Z-source inverters, a unique feature accompanying it is its extra ability to force common-mode voltage to zero even under semiconductor-failure conditions. For verifying these described performance features, PLECS simulation and experimental testing were performed with some results captured and shown in a later section for visual confirmation.

Modulation and control of three-phase paralleled Z-source inverters for distributed generation applications

This paper presents a modulation and controller design method for paralleled Z-source inverter systems applicable for alternative energy sources like solar cells, fuel cells, or variablespeed wind turbines with front-end diode rectifiers. A modulation scheme is designed based on simple shoot-through principle with interleaved carriers to give enhanced ripple reduction in the system. Subsequently, a control method is proposed to equalize the amount of power injected by the inverters in the grid-connected mode and also to provide reliable supply to sensitive loads onsite in the islanding mode. The modulation and controlling methods are proposed to have modular independence so that redundancy, maintainability, and improved reliability of supply can be achieved. The performance of the proposed paralleled Z-source inverter configuration is validated with simulations carried out using Matlab/Simulink/Powersim. Moreover, a prototype is built in the laboratory to obtain the experimental verifications.

Evaluation of resonant damping techniques for Z-source current-type inverter

For the renewable energy sources whose outputs vary continuously, a Z-source current-type inverter has been proposed as a possible buck-boost alternative for grid-interfacing. With a unique X-shaped LC network connected between its dc power source and inverter topology, Z-source current-type inverter is however expected to suffer from compounded resonant complications in addition to those associated with its second-order output filter. To improve its damping performance, this paper proposes the careful integration of Posicast or three-step compensators before the inverter pulse-width modulator for damping triggered resonant oscillations. In total, two compensators are needed for wave-shaping the inverter boost factor and modulation ratio, and they can conveniently be implemented using first-in first-out stacks and embedded timers of modern digital signal processors widely used in motion control applications. Both techniques are found to damp resonance of ac filter well, but for cases of transiting from current-buck to boost state, three-step technique is less effective due to the sudden intermediate discharging interval introduced by its non-monotonic stepping (unlike the monotonic stepping of Posicast damping). These findings have been confirmed both in simulations and experiments using an implemented laboratory prototype.

Dual Z-source inverter with three-level reduced common mode switching

This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck-boost power conversion to be performed over a wide modulation range with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye- or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter. Modulation-wise, the dual inverter can be controlled using a carefully designed carrier-based pulse-width modulation (PWM) scheme that always will ensure balanced voltage boosting of the Z-source network, while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays in the dual inverter PWM scheme, its switched common-mode voltage can be completely eliminated, unlike in traditional inverters where narrow common-mode spikes are still generated. Under semiconductor failure conditions, the presented PWM schemes can easily be modified to allow the inverter to operate without interruption and for cases where two isolated sources are used, zero common-mode voltage can still be ensured. These theoretical findings together with the inverter practicality have been confirmed both in simulations using PSIM with Matlab/Simulink coupler and experimentally using a laboratory implemented inverter prototype.

Dual Z-source inverter with three-level reduced common-mode switching

This paper presents the design of a dual Z-source inverter that can be used with either a single dc source or two isolated dc sources. Unlike traditional inverters, the integration of a properly designed Z-source network and semiconductor switches to the proposed dual inverter allows buck-boost power conversion to be performed over a wide modulation range, with three-level output waveforms generated. The connection of an additional transformer to the inverter ac output also allows all generic wye-or delta-connected loads with three-wire or four-wire configuration to be supplied by the inverter. Modulationwise, the dual inverter can be controlled using a carefully designed carrier-based pulsewidth-modulation (PWM) scheme that will always ensure balanced voltage boosting of the Z-source network while simultaneously achieving reduced common-mode switching. Because of the omission of dead-time delays in the dual-inverter PWM scheme, its switched common-mode voltage can be completely eliminated, unlike in traditional inverters, where narrow common-mode spikes are still generated. Under semiconductor failure conditions, the presented PWM schemes can easily be modified to allow the inverter to operate without interruption, and for cases where two isolated sources are used, zero common-mode voltage can still be ensured. These theoretical findings, together with the inverter practicality, have been confirmed in simulations both using PSIM with Matlab/Simulink coupler and experimentally using a laboratory-implemented inverter prototype.

Robust control scheme for a microgrid with PFC capacitor connected

Capacitors are widely used for power-factor correction (PFC) in power systems. When a PFC capacitor is installed with a certain load in a microgrid, it may be in parallel with the filter capacitor of the inverter interfacing the utility grid and the local distributed-generation unit and, thus, change the effective filter capacitance. Another complication is the possibility of occurrence of resonance in the microgrid. This paper conducts an in-depth investigation of the effective shunt-filter-capacitance variation and resonance phenomena in a microgrid due to a connection of a PFC capacitor. To compensate the capacitance-parameter variation, an Hinfin controller is designed for the voltage-source- inverter voltage control. By properly choosing the weighting functions, the synthesized Hinfin controller would exhibit high gains at the vicinity of the line frequency, similar to traditional high- performance P+ resonant controller and, thus, would possess nearly zero steady-state error. However, with the robust Hinfin controller, it will be possible to explicitly specify the degree of robustness in face of parameter variations. Furthermore, a thorough investigation is carried out to study the performance of inner current-loop feedback variables under resonance conditions. It reveals that filter-inductor current feedback is more effective in damping the resonance. This resonance can be further attenuated by employing the dual-inverter microgrid conditioner and controlling the series inverter as a virtual resistor affecting only harmonic components without interference with the fundamental power flow. And finally, the study in this paper has been tested experimentally using an experimental microgrid prototype.

Poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene): A high performance polymer semiconductor for both organic thin film transistors and organic photovoltaics

A new diketopyrrolopyrrole (DPP)-containing donor-acceptor polymer, poly(2,5-bis(2-octyldodecyl)-3,6-di(furan-2-yl)-2,5-dihydro-pyrrolo[3,4-c] pyrrole-1,4-dione-co-thieno[3,2-b]thiophene) (PDBF-co-TT), is synthesized and studied as a semiconductor in organic thin film transistors (OTFTs) and organic photovoltaics (OPVs). High hole mobility of up to 0.53 cm 2 V -1 s -1 in bottom-gate, top-contact OTFT devices is achieved owing to the ordered polymer chain packing and favoured chain orientation, strong intermolecular interactions, as well as uniform film morphology of PDBF-co-TT. The optimum band gap of 1.39 eV and high hole mobility make this polymer a promising donor semiconductor for the solar cell application. When paired with a fullerene acceptor, PC 71BM, the resulting OPV devices show a high power conversion efficiency of up to 4.38% under simulated standard AM1.5 solar illumination.

Diverse urban plantings managed with sufficient resource availability can increase plant productivity and arthropod diversity

Buildings structures and surfaces are explicitly being used to grow plants, and these “urban plantings” are generally designed for aesthetic value. Urban plantings also have the potential to contribute significant “ecological values” by increasing urban habitat for animals such as arthropods and by increasing plant productivity. In this study, we evaluated how the provision of these additional ecological values is affected by plant species richness; the availability of essential resources for plants, such as water, light, space; and soil characteristics. We sampled 33 plantings located on the exterior of three buildings in the urban center of Brisbane, Australia (subtropical climatic region) over 2, 6 week sampling periods characterized by different temperature and rainfall conditions. Plant cover was estimated as a surrogate for productivity as destructive sampling of biomass was not possible. We measured weekly light levels (photosynthetically active radiation), plant CO2 assimilation, soil CO2 efflux, and arthropod diversity. Differences in plant cover were best explained by a three-way interaction of plant species richness, management water regime and sampling period. As the richness of plant species increased in a planter, productivity and total arthropod richness also increased significantly—likely due to greater habitat heterogeneity and quality. Overall we found urban plantings can provide additional ecological values if essential resources are maintained within a planter such as water, light and soil temperature. Diverse urban plantings that are managed with these principles in mind can contribute to the attraction of diverse arthropod communities, and lead to increased plant productivity within a dense urban context.

The Why, What, and How of Global Biodiversity Indicators Beyond the 2010 Target

The 2010 biodiversity target agreed by signatories to the Convention on Biological Diversity directed the attention of conservation professionals toward the development of indicators with which to measure changes in biological diversity at the global scale. We considered why global biodiversity indicators are needed, what characteristics successful global indicators have, and how existing indicators perform. Because monitoring could absorb a large proportion of funds available for conservation, we believe indicators should be linked explicitly to monitoring objectives and decisions about which monitoring schemes deserve funding should be informed by predictions of the value of such schemes to decision making. We suggest that raising awareness among the public and policy makers, auditing management actions, and informing policy choices are the most important global monitoring objectives. Using four well-developed indicators of biological diversity (extent of forests, coverage of protected areas, Living Planet Index, Red List Index) as examples, we analyzed the characteristics needed for indicators to meet these objectives. We recommend that conservation professionals improve on existing indicators by eliminating spatial biases in data availability, fill gaps in information about ecosystems other than forests, and improve understanding of the way indicators respond to policy changes. Monitoring is not an end in itself, and we believe it is vital that the ultimate objectives of global monitoring of biological diversity inform development of new indicators. ©2010 Society for Conservation Biology.

A Mouse Model of Early-Onset Renal Failure Due to a Xanthine Dehydrogenase Nonsense Mutation

Chronic kidney disease (CKD) is characterized by renal fibrosis that can lead to end-stage renal failure, and studies have supported a strong genetic influence on the risk of developing CKD. However, investigations of the underlying molecular mechanisms are hampered by the lack of suitable hereditary models in animals. We therefore sought to establish hereditary mouse models for CKD and renal fibrosis by investigating mice treated with the chemical mutagen N-ethyl-N-nitrosourea, and identified a mouse with autosomal recessive renal failure, designated RENF. Three-week old RENF mice were smaller than their littermates, whereas at birth they had been of similar size. RENF mice, at 4-weeks of age, had elevated concentrations of plasma urea and creatinine, indicating renal failure, which was associated with small and irregularly shaped kidneys. Genetic studies using DNA from 10 affected mice and 91 single nucleotide polymorphisms mapped the Renf locus to a 5.8Mbp region on chromosome 17E1.3. DNA sequencing of the xanthine dehydrogenase (Xdh) gene revealed a nonsense mutation at codon 26 that co-segregated with affected RENF mice. The Xdh mutation resulted in loss of hepatic XDH and renal Cyclooxygenase-2 (COX-2) expression. XDH mutations in man cause xanthinuria with undetectable plasma uric acid levels and three RENF mice had plasma uric acid levels below the limit of detection. Histological analysis of RENF kidney sections revealed abnormal arrangement of glomeruli, intratubular casts, cellular infiltration in the interstitial space, and interstitial fibrosis. TUNEL analysis of RENF kidney sections showed extensive apoptosis predominantly affecting the tubules. Thus, we have established a mouse model for autosomal recessive early-onset renal failure due to a nonsense mutation in Xdh that is a model for xanthinuria in man. This mouse model could help to increase our understanding of the molecular mechanisms associated with renal fibrosis and the specific roles of XDH and uric acid. © 2012 Piret et al.

Circulating tumor cell detection in high-risk non-metastatic prostate cancer

Purpose The detection of circulating tumor cells (CTCs) provides important prognostic information in men with metastatic prostate cancer. We aim to determine the rate of detection of CTCs in patients with high-risk non-metastatic prostate cancer using the CellSearch® method. Method Samples of peripheral blood (7.5 mL) were drawn from 36 men with newly diagnosed high-risk non-metastatic prostate cancer, prior to any initiation of therapy and analyzed for CTCs using the CellSearch® method. Results The median age was 70 years, median PSA was 14.1, and the median Gleason score was 9. The median 5-year risk of progression of disease using a validated nomogram was 39 %. Five out of 36 patients (14 %, 95 % CI 5–30 %) had CTCs detected in their circulation. Four patients had only 1 CTC per 7.5 mL of blood detected. One patient had 3 CTCs per 7.5 mL of blood detected, which included a circulating tumor microemboli. Both on univariate analysis and multivariate analysis, there were no correlations found between CTC positivity and the classic prognostic factors including PSA, Gleason score, T-stage and age. Conclusion This study demonstrates that patients with high-risk, non-metastatic prostate cancer present infrequently with small number of CTCs in peripheral blood. This finding is consistent with the limited literature available in this setting. Other CTC isolation and detection technologies with improved sensitivity and specificity may enable detection of CTCs with mesenchymal phenotypes, although none as yet have been validated for clinical use. Newer assays are emerging for detection of new putative biomarkers for prostate cancer. Correlation of disease control outcomes with CTC detection will be important.

LKB1 tumor suppression in Peutz-Jeghers Syndrome

Kasvainten, ajatellaan syntyvän yksittäisen solun perimän mutaatioista, jonka seurauksena tuon solun kasvu häiriintyy. Ruoansulatuskanavan polyyppien syntyä käytetään usein mallina siitä, miten nämä epiteelisoluun kerääntyvät mutaatiot aiheuttavat asteittain pahenevan kasvuhäiriön. Peutz–Jeghersin oireyhtymä (PJS) on perinnöllinen polypoosisyndrooma, jossa oireita aiheuttavat erityisesti maha-suolikanavan hamartomatoottiset polyypit. Noin puolella PJS potilaista havaitaan mutaatioita LKB1 kasvunrajoite geenissä. Hiirille joilta toinen Lkb1 alleeli on poistettu (Lkb1+/-) kehittyy PJS-tyypin maha-suolikanavan polyyppeja, joissa on epiteelin liikakasvun lisäksi merkittävä sileälihaskomponentti, aivan kuten PJS polyypeissa. Kuten myös muissa ruoansulatuskanavan polypooseissa, sekä PJS että hiirten polyypeissa Cyclo-oxygenaasi-2:n (COX-2) määrä on usein kohonnut. PJS-polyyppien kehittymisen molekulaarinen mekanismi on kuitenkin selvittämättä. Koska vain osa PJS potilaista kantaa LKB1 mutaatioita, mutaatiot jossakin toisessa lokuksessa saattaisivat selittää osan PJS tapauksista. Jotta PJS:n geneettinen tausta selviäisi, seulottiin kolmen LKB1:n kanssa interaktoivan proteiinin (BRG1, STRADα ja MO25α) geenit PJS potilaista joilla ei ole havaittu LKB1 mutaatioita. Yhdessäkään tutkituista geeneistä ei havaittu tautia aiheuttavia mutaatioita. Näiden kolmen geenin pois sulkeminen, ja uusien menetelmien ansiosta kasvanut havaittujen Lkb1 mutaatioden määrä viittaavat LKB1:n olevan useimpien PJS tapausten taustalla. COX-2:n estäjien käyttö on tehokkaasti vähentänyt polyyppien määrää familiaarisessa adenomatoottisessa polypoosissa. Tästä johtuen COX-2:n eston tehokkuutta tutkittiin PJS polypoosissa. PJS-tyypin polypoosin havaittin pienenevän merkittävästi Lkb1+/- hiirissä, joilta oli lisäksi poistettu toinen tai molemmat COX-2:n alleeleista. Lisäksi farmakologinen COX-2:n esto Celecoxib:lla vähensi polypoosia tehokkaasti. Näin ollen COX-2:n eston tehokkuutta tutkittiin seuraavaksi PJS potilaissa. Kuuden kuukauden Celecoxib hoidon jälkeen polypoosin havaittiin vähentyneen merkittävästi osalla potilaista (2/6). Nämä tulokset osoittavat COX-2:n roolin PJS-polyyppien kehityksessä, ja viittaavat COX-2:n eston vähentävän polypoosia. Kasvunrajoitegeenin klassisen määritelmän mukaan kasvaimen kehitys vaatii perinnöllisen mutaation lisäksi geenin toisenkin alleelin mutaation, mutta PJS-polyyppien häiriintyneestä epiteelistä ei kuitenkaan systemaattisesti löydy toista LKB1:n mutaatiota. Havainto johti tutkimukseen, jossa selvitettiin voisiko LKB1:n kasvun rajoitus välittyäkin epäsuorasti tukikudokseksi ajatelluista sileälihassoluista. Tätä tutkittiin kehittämällä poistogeeninen hiirimalli jossa Lkb1 on mutatoitunut vain sileälihassoluissa. Näille hiirille kehittyi polyyppeja, jotka ovat kaikin tavoin PJS-polyyppien kaltaisia. Lkb1:n menettäneiden solujen havaittiin tuottavan vähemmän transformoivaa kasvutekijä beetaa (TGFß), joka aiheutti solujen välisen viestinnän heikentymisen ja mahdollisesti viereisten epiteelisolujen liikakasvun. Vastaava häiriö havaittiin myös PJS-potilaiden polyypeissa, mikä viittaa siihen, että potilaillakin sileälihassolujen häiriö on polyyppien taustalla. Havainto suuntaa täten hoitokohteiden etsintää ja osoittaa että LKB1 toimii kasvunrajoittajana epätyypillisellä tavalla pitäen naapurisolujen kasvun kurissa.

Molecular mechanisms of cancer predisposition in HNPCC/Lynch syndrome

Hereditary non-polyposis colorectal carcinoma (HNPCC; Lynch syndrome) is among the most common hereditary cancers in man and a model of cancers arising through deficient DNA mismatch repair (MMR). It is inherited in a dominant manner with predisposing germline mutations in the MMR genes, mainly MLH1, MSH2, MSH6 and PMS2. Both copies of the MMR gene need to be inactivated for cancer development. Since Lynch syndrome family members are born with one defective copy of one of the MMR genes in their germline, they only need to acquire a so called second hit to inactivate the MMR gene. Hence, they usually develop cancer at an early age. MMR gene inactivation leads to accumulation of mutations particularly in short repeat tracts, known as microsatellites, causing microsatellite instability (MSI). MSI is the hallmark of Lynch syndrome tumors, but is present in approximately 15% of sporadic tumors as well. There are several possible mechanisms of somatic inactivation (i.e. the second hit ) of MMR genes, for instance deletion of the wild-type copy, leading to loss of heterozygosity (LOH), methylation of promoter regions necessary for gene transcription, or mitotic recombination or gene conversion. In the Lynch syndrome tumors carrying germline mutations in the MMR gene, LOH was found to be the most frequent mechanism of somatic inactivation in the present study. We also studied MLH1/MSH2 deletion carriers and found that somatic mutations identical to the ones in the germline occurred frequently in colorectal cancers and were also present in extracolonic Lynch syndrome-associated tumors. Chromosome-specific marker analysis implied that gene conversion, rather than mitotic recombination or deletion of the respective gene locus accounted for wild-type inactivation. Lynch syndrome patients are predisposed to certain types of cancers, the most common ones being colorectal, endometrial and gastric cancer. Gastric cancer and uroepithelial tumors of bladder and ureter were observed to be true Lynch syndrome tumors with MMR deficiency as the driving force of tumorigenesis. Brain tumors and kidney carcinoma, on the other hand, were mostly MSS, implying the possibility of alternative routes of tumor development. These results present possible implications in clinical cancer surveillance. In about one-third of families suspected of Lynch syndrome, mutations in MMR genes are not found, and we therefore looked for alternative mechanisms of predisposition. According to our results, large genomic deletions, mainly in MSH2, and germline epimutations in MLH1, together explain a significant fraction of point mutation-negative families suspected of Lynch syndrome and are associated with characteristic clinical and family features. Our findings have important implications in the diagnosis and management of Lynch syndrome families.

The Role Of Fumarase (FH) In Tumorigenesis

In this study, a predisposing gene for a recently characterized cancer syndrome, hereditary leiomyomatosis and renal cell cancer (HLRCC), was identified and the role of the gene was investigated in other familial cancers and in nonsyndromic tumorigenesis. HLRCC is a dominantly inherited disorder predisposing predominantly to uterine and skin leiomyomas, and also to renal cell cancer and uterine leiomyosarcoma. The disease gene was recently localized in Finnish families to 1q42-q43 by a genome-wide linkage search. Independently in the UK, a clinically similar condition, multiple cutaneous and uterine leiomyomata (MCUL), was linked to the same chromosomal region, strongly suggesting that HLRCC and MCUL are actually a single syndrome. Linkage results were confirmed by detecting loss of heterozygosity (LOH) at the disease locus in most of the patients' tumors, suggesting that this predisposing gene acts as a tumor suppressor. Through detailed investigation by genotyping of microsatellite markers and haplotype construction in Finnish and UK HLRCC/MCUL families we were able to narrow the disease locus down to 1.6 Mb. Extensive mutation screening of known and predicted transcripts in the target region resulted in identification of the HLRCC predisposing gene, fumarase (fumarate hydratase, FH). FH is a key enzyme in energy metabolism, catalyzing fumarate to malate in the tricarboxylic acid cycle (TCAC) in mitochondria. Germline alterations in FH segregating with the disease were detected in 25 of 42 HLRCC/MCUL families including whole-gene deletions, truncating small deletions/insertions and nonsense mutations, as well as substitutions or deletions of highly conserved amino acids. Biallelic inactivation was detected in almost all studied tumors of HLRCC patients. Furthermore, FH enzyme activity was reduced in the patients' normal tissues and was completely or virtually absent from tumors. Based on these findings, we extensively demonstrated that mutations in FH underlie the HLRCC/MCUL syndrome. In our studies of other familial cancers, evidence for involvement of FH defects was not found in familial prostate and breast cancers. To investigate the role of FH in sporadic tumorigenesis, we analyzed 652 lesions, including a series of 353 nonsyndromic counterparts of tumor types associated with HLRCC. Mutations in nonsyndromic tumors were rare and appeared to be limited to tumor types observed in the hereditary form of the disease. Biallelic inactivation of FH was detected in a uterine leiomyosarcoma, a cutaneous leiomyoma, a soft-tissue sarcoma, and in two uterine leiomyomas. In the uterine leiomyosarcoma and the cutaneous lesion FH mutations originated from the germline whereas the soft-tissue sarcoma harbored purely somatic changes. In uterine leiomyomas somatic mutations were detected in the two out of five tumors with LOH at the FH locus. Our findings demonstrate that FH inactivation is also involved in nonhereditary tumor development, and further support the hypothesis that FH acts as a tumor suppressor. The role of FH in predisposition to malignancies, renal cell carcinoma and leiomyosarcoma is important in the diagnosis and prevention of cancer among HLRCC patients. This study is of general clinical interest, because prior to our findings, little was known about the molecular genetics of uterine leiomyomas, the most common tumors of women.