Design and implementation of a virtual world training simulation of ICU first hour handover processes

Nursing training for an Intensive Care Unit (ICU) is a resource intensive process. High demands are made on staff, students and physical resources. Interactive, 3D computer simulations, known as virtual worlds, are increasingly being used to supplement training regimes in the health sciences; especially in areas such as complex hospital ward processes. Such worlds have been found to be very useful in maximising the utilisation of training resources. Our aim is to design and develop a novel virtual world application for teaching and training Intensive Care nurses in the approach and method for shift handover, to provide an independent, but rigorous approach to teaching these important skills. In this paper we present a virtual world simulator for students to practice key steps in handing over the 24/7 care requirements of intensive care patients during the commencing first hour of a shift. We describe the modelling process to provide a convincing interactive simulation of the handover steps involved. The virtual world provides a practice tool for students to test their analytical skills with scenarios previously provided by simple physical simulations, and live on the job training. Additional educational benefits include facilitation of remote learning, high flexibility in study hours and the automatic recording of a reviewable log from the session. To the best of our knowledge, we believe this is a novel and original application of virtual worlds to an ICU handover process. The major outcome of the work was a virtual world environment for training nurses in the shift handover process, designed and developed for use by postgraduate nurses in training.

Multiuser virtual safety training system for tower crane dismantlement

Tower crane dismantling is one of the most dangerous activities in the construction industry. Tower crane erection and dismantlement causes 10–12% of the fatalities of all crane accidents. The nature of the task is such that off-the-job training is not practicable, and the knowledge and expertise needed has to be gained on the job. However, virtual trainers such as Microsoft Flight Simulator for airplane pilots and mission rehearsal exercise (MRE) for army personnel have been developed and are known to provide a highly successful means of overcoming the risks involved in such on-the-job learning and clearly have potential in construction situations. This paper describes the newly developed multiuser virtual safety training system (MVSTS) aimed at providing a similar learning environment for those involved in tower crane dismantlement. The proposed training system is developed by modifying an existing game engine. Within the close-to-reality virtual environment, trainees can participate in a virtual dismantling process. During the process, they learn the correct dismantling procedure and working location and to cooperate with other trainees by virtually dismantling the crane. The system allows the trainees to experience the complete procedure in a risk-free environment. A case study is provided to demonstrate how the system works and its practical application. The proposed system was evaluated by interviews with 30 construction experts with different backgrounds, divided into three groups according to their experience and trained by the traditional and virtual methods, respectively. The results indicate that the trainees of the proposed system generally learned better than those using the traditional method. The ratings also indicate that the system generally has great potential as a training platform.

SOTrain: A new program for training supervisors and operators in Australian sugar factories

The provision of effective training of supervisors and operators is essential if sugar factories are to operate profitably and in an environmentally sustainable and safe manner. The benefits of having supervisor and operator staff with a high level of operational skills are reduced stoppages, increased recovery, improved sugar quality, reduced damage to equipment, and reduced OH&S and environmental impacts. Training of new operators and supervisors in factories has traditionally relied on on-the-job training of the new or inexperienced staff by experienced supervisors and operators, supplemented by courses conducted by contractors such as Sugar Research Institute (SRI). However there is clearly a need for staff to be able to undertake training at any time, drawing on the content of online courses as required. An improved methodology for the training of factory supervisors and operators has been developed by QUT on behalf of a syndicate of mills. The new methodology provides ‘at factory’ learning via self-paced modules. Importantly, the training resources for each module are designed to support the training programs within sugar factories, thereby establishing a benchmark for training across the sugar industry. The modules include notes, training guides and session plans, guidelines for walkthrough tours of the stations, learning activities, resources such as videos, animations, job aids and competency assessments. The materials are available on the web for registered users in Australian Mills and many activities are best undertaken online. Apart from a few interactive online resources, the materials for each module can also be downloaded. The acronym SOTrain (Supervisor and Operator Training) has been applied to the new training program.

Training control centers' operators in incident diagnosis and power restoration using intelligent tutoring systems

The activity of Control Center operators is important to guarantee the effective performance of Power Systems. Operators’ actions are crucial to deal with incidents, especially severe faults like blackouts. In this paper, we present an Intelligent Tutoring approach for training Portuguese Control Center operators in tasks like incident analysis and diagnosis, and service restoration of Power Systems. Intelligent Tutoring System (ITS) approach is used in the training of the operators, having into account context awareness and the unobtrusive integration in the working environment. Several Artificial Intelligence techniques were criteriously used and combined together to obtain an effective Intelligent Tutoring environment, namely Multiagent Systems, Neural Networks, Constraint-based Modeling, Intelligent Planning, Knowledge Representation, Expert Systems, User Modeling, and Intelligent User Interfaces.

Sector-Specific Training and Mobility in Germany

This article studies mobility patterns of German workers in light of a model of sector-specific human capital. Furthermore, I employ and describe little-used data on continuous on-the-job training occurring after apprenticeships. Results are presented describing the incidence and duration of continuous training. Continuous training is quite common, despite the high incidence of apprenticeships which precedes this part of a worker's career. Most previous studies have only distinguished between firm-specific and general human capital, usually concluding that training was general. Inconsistent with those conclusions, I show that German men are more likely to find a job within the same sector if they have received continuous training in that sector. These results are similar to those obtained for young U.S. workers, and suggest that sector-specific capital is an important feature of very different labor markets. In addition, they suggest that the observed effect of training on mobility is sensible to the state of the business cycle, indicating a more complex interaction between supply and demand that most theoretical models allow for.

Employment and training for America's homeless : best practices guide /

"Prepared under the direction of the Office of Policy and Research (OPR) of the Department of Labor's Employment and Training Administration (DOL/ETA) by James Bell Associates, Inc. (JBA). The authors are Susan Kessler Beck ... [et al.]"--1st printed p.

Education and training in the use of physical agent modalities by occupational therapists practicing in the physical disabilities area

This study was conducted to examine how occupational therapists (OTs) practicing in the physical disabilities area received their training in the use of physical agent modalities (PAMs); to determine the frequency of PAMs usage by those therapists; and to obtain their opinions regarding the training of OTs and OT students in the administration of PAMs. Three hundred OTs practicing in physical diabilities (n = 194 returned) were surveyed. The most frequently used modalities were hot and cold packs, paraffin, and ultrasound. The least frequently used modalities were transcutaneous electrical stimulation (TENS) and whirlpool. On-the-job training was the most common educational method received by the respondents for PAMs usage. The respondents considered a combination of undergraduate education, fieldwork, continuing education and on-the-job training as the most appropriate educational setting for training in modalities. While few of the respondents received preparation in PAMs during entry-level academic programs, the majority felt that OT students should be trained in PAMs usage as part of their education curriculum. ^

Transforming Queensland VET : Challenges and Opportunities (Volume 3)

The volume is the third in a series that addresses change and development in the delivery of VET programs in Queensland. The chapters address a breadth of issues that relate to the changing landscape for teaching and learning in VET programs through e-learning. Organisational change is a key focus of this volume. James Waterson examines business and pedagogical perspectives for SkillsTech Australia to create teaching and learning environments that will enrich the learning experience for staff and students. Kerry Emerson explores the ways in which printing teachers might change current practices in order to deliver their training to apprentices and trainees – off-the-job, onthe- job and online, through e-learning. The chapter by Erik Dodwell takes up issues of user-friendly RPL interviews and the challenges to develop a model that may be applied consistently across all industry areas using conversational interviews. The chapters by Linda Roberston, Nina Woodrow, and Anushka Weerackody discuss teaching and learning for specific groups of students. Linda Roberston proposes a vision for learning support teachers in which the learner is encouraged to be a self-directed and autonomous learner who is capable of utilising e-learning resources and is information literate. Nina Woodrow presents a case for the diminished sense of occupational identity by adult literacy teachers and the implications of this loss of expertise across the VET sector. Constructive strategies for change are outlined. The chapter by Anushka Weerackody explores ideas to enhance the practices of ESL teachers in TAFE Queensland through an online community of practice. The issues of on-the-job training through e-learning for various trades is considered by Anne-Louise Johnston and the benefits and challenges for SkillsTech Australia in developing training partnerships with industry to deliver these changes. These papers were completed by the authors as a part of their postgraduate studies at QUT. The views reported are those of the authors and should not be attributed to the Queensland Department of Education and Training. Donna Berthelsen and Lauren Vogel Faculty of Education Queensland University of Technology December 2009

Education on plant and machinery valuation for the real market : Malaysian practicality

The purpose of this paper is to determine and discuss on the plant and machinery valuation syllabus for higher learning education in Malaysia to ensure the practicality of the subject in the real market. There have been limited studies in plant and machinery area, either by scholars or practitioners. Most papers highlighted the methodologies but limited papers discussed on the plant and machinery valuation education. This paper will determine inputs for plant and machinery valuation guidance focussing on the syllabus set up and references for valuers interested in this area of expertise. A qualitative approach via content analysis is conducted to compare international and Malaysian plant and machinery valuation syllabus and suggest improvements for Malaysian syllabus. It is found that there are few higher education institutions in the world that provide plant and machinery valuation courses as part of their property studies syllabus. Further investigation revealed that on the job training is the preferable method for plant and machinery valuation education and based on the valuers experience. The significance of this paper is to increase the level of understanding of plant and machinery valuation criteria and provide suggestions to Malaysian stakeholders with the relevant elements in plant and machinery valuation education syllabus.

Dumbing it down : where do standards fit?

In Australia, Vocational Education and Training (VET) programs are delivered in a variety of settings. You can be enrolled within a course in a high school, at a technical institution, private training provider or at your place of employment. Recognition of prior learning, on the job training and industry partnerships are strong factors supporting the change of delivery. The curriculum content within these programs has also changed. For example within the Business Services programs, the prerequisite and corequisite skill of touch keyboarding to an Australian Standard has moved from a core requirement in the 1990’s to an elective requirement in the 2000’s. Where a base skill becomes an elective skill, how does this effect the performance and outcomes for the learner, educator, employer and society as a whole? This paper will explore these issues and investigate the current position of standards within the VET curriculum today.

How much do residential aged care staff members know about the nutritional needs of residents?

Background Undernutrition, weight loss and dehydration are major clinical issues for people with dementia in residential care, with excessive weight loss contributing to increased risk of frailty, immobility, illness and premature morbidity. This paper discusses a nutritional knowledge and attitudes survey conducted as part of a larger project focused on improving nutritional intake of people with dementia within a residential care facility in Brisbane, Australia. Aims The specific aims of the survey were to identify (i) knowledge of the nutritional needs of aged care facility residents; (ii) mealtime practices; and (iii) attitudes towards mealtime practices and organisation. Methods A survey based on those used in other healthcare settings was completed by 76 staff members. The survey included questions about nutritional knowledge, opinions of the food service, frequency of feeding assistance provided and feeding assessment practices. Results Nutritional knowledge scores ranged from 1 to 9 of a possible 10, with a mean score of 4.67. While 76% of respondents correctly identified risk factors associated with malnutrition in nursing home residents, only 38% of participants correctly identified the need for increased protein and energy in residents with pressure ulcers, and just 15% exhibited correct knowledge of fluid requirements. Further, while nutritional assessment was considered an important part of practice by 83% of respondents, just 53% indicated that they actually carried out such assessments. Identified barriers to promoting optimal nutrition included insufficient time to observe residents (56%); being unaware of residents' feeding issues (46%); poor knowledge of nutritional assessments (44%); and unappetising appearance of food served (57%). Conclusion An important step towards improving health and quality of life for residents of aged care facilities would be to enhance staff nutritional awareness and assessment skills. This should be carried out through increased attention to both preservice curricula and on-the-job training. Implications for practice The residential facility staff surveyed demonstrated low levels of nutrition knowledge, which reflects findings from the international literature. This has implications for the provision of responsive care to residents of these facilities and should be explored further.

The professional development, resource and support needs of rural and urban ICT teachers

This paper presents findings from the SiMERR National Survey concerning the need priorities of secondary ICT teachers for professional development, resources and student learning experiences. The findings - drawn from a survey of 237 secondary ICT teachers across Australia - provide an opportunity to compare the needs of teachers working in metropolitan, provincial and remote schools. The study found that vacant ICT positions are difficult to fill ond that the novel on dynamic nature of ICT requires teachers to have more extensive opportunities for on-the-job training, collegial collaboration and mentoring than is the case for teachers of more traditional subjects like science and mathematics. The study also found that ICT teachers are commonly required to manage and maintain ICT resources and to assist other staff to use ICT resources, while being allocated insufficient time in which to do these additional activities. The implications of these and other findings are discussed along with recommendations to help address the needs of ICT teachers in different parts of Australia.

Efecto de la formación en el trabajo sobre la movilidad laboral

[ES] En este trabajo se analiza empíricamente la relación existente entre la formación dada por la empresa a sus trabajadores y la posterior salida de la empresa de dichos trabajadores. La principal aportación a la literatura existente en este campo se encuentra en la metodología empírica que se utiliza. En concreto, se propone un modelo de estimación que específicamente tiene en cuenta la posible endogeneidad existente entre la variable de formación y la de movilidad laboral.

Citotécnico: análise do processo de trabalho em laboratórios de citopatologia e anatomopatologia no Estado do Rio de Janeiro.

Trata-se de um estudo sobre o processo de trabalho dos citotécnicos que atuam em laboratórios de Anatomopatologia e Citopatologia no Estado do Rio de Janeiro, cujo objetivo geral é: analisar a percepção dos citotécnicos sobre as competências necessárias à execução de sua atividade laboral; e específicos: (1) descrever a atividade laboral do citotécnico; (2) identificar o modo de produção da atividade por meio das inter-relações de trabalho; (3) conhecer e compreender as implicações do trabalho do citotécnico nas ações de controle do câncer. A investigação foi de abordagem qualitativa, de natureza descritiva e social, realizada em três laboratórios de Anatomopatologia e Citopatologia no Estado do Rio de Janeiro, com a participação de 33 citotécnicos. Os dados foram obtidos pela técnica de entrevista semiestruturada, aplicação de questionário, e grupo focal, no período de janeiro a agosto de 2014, e analisados com base na Análise de Conteúdo de Bardin, tendo como unidade de registro o tema. Os resultados revelaram: dos 33 citotécnicos, 73% são do sexo feminino; 34% estão distribuídos em igual percentual para as faixas etárias entre 41 a 50 anos e 51 a 60 anos. Com relação à variável do grau de escolaridade, 43% possuem especialização e 24% concluíram o curso superior. Em relação ao cargo exercido, 73% atuam como citotécnicos e 70% são funcionários públicos. O trabalho do citotécnico tem especificidade única desse trabalhador de nível técnico, que é a realização da primeira análise do exame citopatológico, com ações articuladas e complementares de natureza técnica, de gestão, e educativas vinculadas à equipe, com ênfase nos princípios de prevenção e promoção da saúde. Por meio da escala de avaliação do contexto de trabalho, foram avaliadas as condições físicas, materiais e organizacionais do processo de trabalho. O quesito clareza, na definição das tarefas, foi o maior valorado com 4,7% de média, seguido das relações socioprofissionais com média de 4,0%. Os resultados da análise de conteúdo revelaram: na trajetória da atividade laboral, emergiram quatro categorias associadas à motivação e ao ingresso na ocupação por pessoas de referência na formação, acesso ao mercado de trabalho, busca pelo aperfeiçoamento profissional e aprendizagem prática no trabalho; no conceito de modo de produção, emergiram cinco categorias: responsabilidade de salvar vidas, crítica em relação ao próprio trabalho com qualidade, características físicas, atividades distintas do citotécnico e do histotécnico, visão do trabalho com otimismo; nas condições de trabalho, emergiram quatro categorias: trabalho em equipe e responsabilidade individual, ambiguidade em relação à autonomia, precarização do trabalho, esperança no reconhecimento da profissão. O trabalho do citotécnico é uma ocupação fracamente regulamentada, que se caracteriza por ausência de perfil profissional específico compatível com o escopo de prática real observada no trabalho levando a condições de trabalho precário. O reconhecimento ocorre entre os próprios trabalhadores que se valorizam por serem responsáveis pela promoção da saúde tornando seu trabalho socialmente útil.

A Long and Winding Road to Employment?: Disabled young people in Northern Ireland making the transition to adulthood

This paper presents the findings of a qualitative research project that explores the experiences and aspirations of disabled young people in Northern Ireland as they make and deal with the transition to adulthood. The study involved young people with disabilities (n=76) in four areas of Northern Ireland, ensuring a geographical spread, an urban/rural mix and representation of both communities. Young people with learning disabilities were included as well as those with physical and/or sensory impairments. This paper focuses on those who were completing job training or work placements and examines the role of such schemes in assisting young people’s transition to adulthood. The research found that many young people had positive experiences of work placement and job training and that social interaction was important to them. Few young people, however, had made the actual transition from work placement or training to ‘real’ employment.