Fe(2-EHA)(3)/Al(i-Bu)(3)/hydrogen phosphite catalyst for preparing syndiotactic 1,2-polybutadiene

Polymerizing 1,3-butadiene into syndiotactic 1,2-polybutadiene with art iron(III) catalyst system has been investigated. Activity of the catalyst was affected by the type of cocatalyst alkylaluminum and the phosphorus compound as an electron donor, molar ratio of catalyst components, and their aging sequence and aging time of the catalyst. The microstructure and configuration of the polymer was decided by the catalyst components, the higher [Al]/[Fe] molar ratio tending to yield syndiotactic 1,2-polybutadiene, while the higher [P]/[Fe] molar ratio favors the formation of amorphous 1,2-polybutadiene.

Synthesis, structure and characterization of a novel asymmetrical half-sandwich binuclear iron carborane complex [eta(5)-C5H3 (t-Bu)(2)](2)Fe-2 (CO)(3)Se2C2B10H10

Halfsandwich iron dicarbonyl complex [eta(5)-C5H3(t-Bu)(2)]Fe(CO)(2)Cl(1) reacts with 1, 2-dilithium diseleno carborane Li(2)Se(2)C(2)B(10)H10 (2) to give a binuclear iron carborane complex [eta(5)-C5H3(t-Bu)(2)](2)Fe-2(CO)(3) Se2C2B10H10(3). The X-ray diffraction analysis of complex 3 reveals that one of the iron atoms is chiral.

1,1 '-di(tert-butyl)metallocenium cations. The x-ray crystal structures of [M((C5H4Bu)-Bu-t)(2)]PF6 (M = Fe, Co) and [Co((C5H4Bu)-Bu-t)(2)](2)CoCl4

The hexafluorophosphate salts [Fe((C5H4Bu)-Bu-t)(2)]PF6 (1) and [Co((C5H4Bu)-Bu-t)(2)]PF6 (2) crystallize in isotypic structures with centrosymmetric cations which have a staggered (transoid) conformation of the exactly parallel ring Ligands (conformational angle tau = 180 degrees). The tetrachlorocobaltate salt, [CO((C5H4Bu)-Bu-t)(2)](2)CoCl4 (3), contains one almost eclipsed (tau = 140.4 degrees) and one almost staggered (tau = 101.4 degrees) cobaltocenium cation; in both cases, the cyclopentadienyl ring planes are slightly inclined (by alpha = 5.4 degrees and 4.1 degrees, respectively) to give more room to the tert-butyl substituents which are bent away from the metal in all three complexes 1 - 3.

Synthesis and crystal structure of (1,3-(Bu2C5H3)-Bu-t)(2)Sm(mu-Cl)(2)Li(THF)(2)

Anhydrous SmCl3 reacts with two equal of Li(1-3-(Bu2C5H3)-Bu-t) to give a complex (1,3-(Bu2C5H3)-Bu-t)(2) Sm(mu -Cl)(2)Li(THF)(2) (C34H58Cl2LiO2Sm, M-r = 726.99), monoclinic, space group P2(1)/n, a = 10.615(2), b = 21.037(4), c = 17.166(3) Angstrom, beta = 93.60(3)degrees, V = 3825.7 (13) Angstrom (3), Z = 4, D-c = 1.262 Mg/m(3), mu = 1.699 mm(-1) and F(000) = 1508, final R = 0.0387 and wR = 0.0741 for 5320 observed[I greater than or equal to2 sigma (I)] reflections. The average Sm - C distance is 2.73 Angstrom. Sm - Cl1 and Sm - Cl2 distances are 2.719 (2) and 2. 697 (2) Angstrom, respectively. Two 1, 3-(Bu2C5H3)-Bu-t-ring centroids and two mu (2)-bridging chloride atoms around Sm atom form a distorted tetrahedron.

Controlled synthesis of L-lactide-b-epsilon-caprolactone block copolymers using a rare earth complex as catalyst

Well-defined block copolymers of L-lactide-b-epsilon-caprolactone were synthesized by sequential polymerization using a rare earth complex, Y(CF3COO)(3)/Al(iso-Bu)(3), as catalyst system. The compositions of the block copolymers could be adjusted by manipulating the feeding ratio of comonomers. The characterizations by GPC, H-1 NMR, C-13 NMR, and DSC displayed that the block copolymer, poly(epsilon-caprolactone-b-L-lactide) [P(CL-b-LLA)], had a narrow molecular weight distribution and well-controlled sequences without random placement.

Synthesis of isotactic polystyrene with a rare-earth catalyst

Polymerization of styrene with the neodymium phosphonate Nd(P-507)/H2O/Al(i-Bu)(3) catalytic system has been examined. The polymer obtained was separated into a soluble and an insoluble fraction by 2-butanone extraction. C-13-NMR spectra indicate that the insoluble fraction is isotactic polystyrene and the soluble one is syndiotactic-rich atactic polystyrene. The polymerization features are described and discussed. The optimum conditions for the polymerization are as follows: [Nd] = (3.5-5.0) x 10(-2) mol/L; [styrene] = 5 mol/L; [Al]/[Nd] = 6-8 mol/mol; [H2O]/[Al] = 0.05-0.08 mol/mol; polymerization temperature around 70 degrees C. The percent yield of isotactic polystyrene (TY) is markedly affected by catalyst aging temperature. With increase of the aging temperature from 40 to 70 degrees C, TY increases from 9% to 48%. Using AlEt3 and Al(i-Bu)(2)H instead of Al(i-Bu)(3) decreases the yield of isotactic polystyrene. Different neodymium compounds give the following activity order: Nd(P-507)(3) > Nd(P-204)(3) > Nd(OPri)(3) > NdCl3 + C2HF5OH > Nd(naph)(3). With Nd(naph)(3) as catalyst, only atactic polystyrene is obtained. (C) 1998 John Wiley & Sons, Inc.

A novel rare earth coordination catalyst for polymerization of biodegradable aliphatic lactones and lactides

A novel rare earth coordination system composed of lanthanide trifluoroacetates Ln(CF3COO)(3) (Ln = Y, Yb, Nd, Tm, Ho, La, Pr) and triisobutylaluminium Al(i-Bu)(3) was used as catalyst for the polymerization of epsilon-caprolactone (CL), D,L-lactide (DLLA) and their copolymerization. The influence of temperature, time and catalyst concentration on polymerization yields and molecular weights of the polyesters have been studied. It was shown that the ring-opening polymerization of cyclic esters catalysed by Ln(CF3COO)(3)/Al(i-Bu)(3) has some living character and the molecular weight of the polyester could be controlled by adjusting the molar ratio of monomer to catalyst. The DLLA/CL copolymer was synthesized by sequential addition of monomers and the structure of the copolyester was characterized by GPC, NMR and DSC. (C) 1998 SCI.

The polymerization of methyl methacrylate with a new Nd(O-i-Pr)(3)-Al(i-Bu)(3) catalyst system

Methyl methacrylate (MMA) was polymerized with the rare earth coordination catalyst-system of Nd(O - i-Pr)(3) in toluene. The influences of various ligands in neodymium complexes, molar ratio of Al/Nd, catalyst concentration, catalyst aging time, solvents, the third component CCl4, temperature and time on the polymerization of MMA were studied. The results showed that the polymerization conversion reached more than 80% at a catalyst concentration of 9.2 x 10(-3) mol/L. The appropriate molar ratio of CCl4/Nd was 4. Hydrocarbon was preferred for the polymerzation to obtain a high conversion and a high <(M)over bar w> of PMMA. The H-1 NMR spectra of PMMA indicated that the lower the temperature, the higher the syndiotactic content of PMMA was obtained.

Stereospecific polymerization of styrene using a homogeneous lanthanide catalyst

Stereospecific polymerization of styrene was catalyzed by homogeneous neodymium phosphonate [Nd(P-507)(3)]-H2O-Al(i-Bu)(3) catalytic system. The polymer was separated into isotactic polystyrene and atactic polystyrene by extracting the latter with boiling 2-butanone. The conversion of styrene and the yield of isotactic polystyrene (IY) were influenced by the [H2O]/[Al(i-Bu)(3)] mole ratio and the solvent polarity. The reaction is first order with respect to monomer at 70 degrees C.

The reactivity of lanthanide alkyl compounds with phenylacetylene: Synthesis and structure of [(Bu(t)Cp)(2)LnC CPh](2) (Ln=Nd, Gd)

[(Bu(t)Cp)(2)LnCH(3)](2) (Ln = Nd, Gd) react with PhC=CH to form the dimeric alkynide-bridged complexes [(Bu(t)Cp)(2)LnC=CPh](2) [Ln = Nd (I), Gd (II)]. Both compounds crystallized from toluene in the monoclinic space group C2/c. The two complexes are homologous, composed of asymmetric metal-alkynide bridges with Nd-C, Gd-C (alkynide) bond lengths of 2.602(4), 2.641(5) (I) and 2.532(6), 2.601(7) Angstrom (II), respectively. The average Nd-C (ring) and Gd-C (ring) distances are 2.746(13) and 2.703(19)Angstrom.

A study of the radical reaction of C-60 with n-Bu(3)SnH

The reaction of buckministerfullerene (C-60) with tri-n-blltyltin hydride(n-Bu(3)SnH) in toluene solution has been investigated. According to mass spectrometry analysis, the products of above reaction are C-60(BuH)(n)(n = 1 similar to 3) and Bu(x)Sn(y)H(x) (x = 3 similar to 8, y = 1 similar to 4,approximate to = 0 similar to 3). The reaction maybe provide a new method for the synthesis of alkylated fullerene derivatives. Where C-60 also takes a role of a catalysis of organtic-tin polymerization. The radical reaction mechanism has been discussed.

SYNTHESIS, SOLUTION DYNAMICS AND X-RAY CRYSTAL-STRUCTURES OF NEODYMIUM-YLIDE COMPLEXES, [(C(5)H(4)R)(3)NDCH2P(ME)PH(2)] (R=H, BU(T))

The interaction of [(C(5)H(4)R)(2)NdCl.2LiCl] (R = H, Bu(t)) with one equivalent of Li[(CH2)(CH2)PPh(2)] in refluxing tetrahydrofuran gave the purplish-blue complex [(C(5)H(4)R)(3)NdCH2P(Me)Ph(2)] in 50% yield. The compounds have been fully characterized by analytical, spectroscopic and X-ray diffraction methods. Variable temperature P-31{H-1} NMR spectroscopy indicated the existence of the following equilibrium: [(C(5)H(4)R)(3)NdCH2P(Me)Ph(2)] + THF reversible arrow (C(5)H(4)R)(3)Nd(THF) + CH2=P(Me)Ph(2). At room temperature, the exchange between the coordinated and free ylide ligand is slow on the NMR time scale.

［（μ－CF＿3CO＿2）＿2Ln（μ－CF＿3HCO＿2）Al（i－Bu）＿2·2THFl＿2（Ln＝Nd，Y）配合物的NMR和X－射线衍射研究

对［μ－ＣＦ＿３ＣＯ＿２）＿２Ｌｎ（μ－ＣＦ＿３ＨＣＯ＿２）Ａｌ（ｉ－Ｂｕ）＿２·ＴＨＦｌ＿２（Ｌｎ＝Ｎｄ，Ｙ）配合物单晶结构的Ｘ－射线分析指出，配合物具有中心对称性，配位中心由两个稀土和两个Ａｌ离子组成，稀土由两个ＴＨＦ和６个ＴＦＡ分子配位形成畸变的三盖三棱柱结构，Ａｌ由两个ＴＦＡＧ和两个ｉ－Ｂｕ配位形成四面体结构。桥连Ａｌ与两个稀土的ＴＦＡ分子的羧基发生歧化加氢，其碳原子由ＳＰ￣２型转变为ＳＰ￣３型．ＮＭＲ研究表明，在ＴＨＦ溶液中，该配合物保持了它在单晶中的配位结构，所不同的是两个ｉ－Ｂｕ在溶液中有两种异构形成，二者间为慢交换过程。

〔Li（DME）_3〕〔（η~5－MeCp）Nd（t－Bu）_3〕的合成及其对

将ＭｅＣｐＮｄＣｌ２·２ＬｉＣ１·ｎＴＨＦ和２摩尔ｔ－ＢｕＬｉ于四氢呋喃和戊烷混合溶剂中反应，合成得到一种新的阴离子型配合物〔Ｌｉ（ＤＭＥ）３〕〔（η５－ＭｅＣｐ）Ｎｄ（ｔ－Ｂｕ）３〕，用元素分析，红外光谱等作了表征，配合物溶于苯乙烯，可单独引发苯乙烯本体聚合，得无规聚苯乙烯。