Synthesis and physical properties of lipid-based poly(ester-urethane)s, I: Effect of varying polyester segment length

Four aliphatic thermoplastic poly(ester-urethane)s (PEUs) with similar molecular weights but varying polyesters molecular weight (534-1488 g/mol) were prepared from polyester diols, obtained by melt condensation of Azelaic acid and 1,9-Nonanediol, and 1,7-heptamethylene di-isocyanate (HPMDI) all sourced from vegetable oil feedstock. The thermal, and mechanical properties, and crystal structure of PEUs were investigated using DSC, TGA, DMA, tensile analysis and WAXD. For sufficiently long polyester chain, WAXD data indicated no hydrogen bonds polyethylene (PE)-like crystalline packing and for short polyester chains, small crystal domains with significant H-bonded polyamide (PA)-like packing. Crystallinity decreased with decreasing polyester molecular weights. The polymorphism of PEUs and consequently their melting characteristics were found to be largely controlled by polyester segment length. TGA of the PEUs indicated improved thermal stability with decreasing polyester chain length, suggesting a stabilization effect by urethane groups. Mechanical properties investigated by DMA and tensile analysis were found to scale predictably with the overall crystallinity of PEUs. (C) 2012 Elsevier Ltd. All rights reserved.

Obtenção e caracterização de um compósito de poliuretano de mamona e pó de vidro para aplicações em insolantes térmicos

Thermal insulation is used to protect the heated or cooled surfaces by the low thermal conductivity materials. The rigid ricin polyurethane foams (PURM) are used for thermal insulation and depend on the type and concentration of blowing agent. Obtaining PURM occurs by the use of polyol, silicone, catalyst and blowing agent are pre -mixed, reacting with the isocyanate. The glass is reusable, returnable and recyclable heat insulating material, whose time of heat dissipation determines the degree of relaxation of its structure; and viscosity determines the conditions for fusion, operating temperatures, annealing, etc. The production of PURM composites with waste glass powder (PV) represents economical and renewable actions of manufacturing of thermal insulating materials. Based on these aspects, the study aimed to produce and characterize the PURM composites with PV, whose the mass percentages were 5, 10, 20, 30, 40 and 50 wt%. PURM was obtained commercially, while the PV was recycled from the tailings of the stoning process of a glassmaking; when the refining process was applied to obtain micrometer particles. The PURM + PV composites were studied taking into account the standard sample of pure PURM and the influence of the percentage of PV in this PURM matrix. The results of the chemical, physical and morphological characterization were discussed taking into account the difference in the microstructural morphology of the PURM+PV composites and the pure PURM, as well the results of the physicochemical, mechanical e thermophysical tests by values obtained of density, hardness, compressive strength, specific heat, thermal conductivity and diffusivity. In general, the structure of pure PURM showed large, elongated and regular pores, while PURM+PV composites showed irregular, small and rounded pores with shapeless cells. This may have contributed to reducing their mechanical strength, especially for PURM - PV50. The hardness and density were found to have a proportional relationship with the PV content on PURM matrix. The specific heat, thermal diffusivity and thermal conductivity showed proportional relationship to each other. So, this has been realized that the increasing the PV content on PURM matrix resulted in the rise of diffusivity and thermal conductivity and the decrease of the specific heat. However, the values obtained by the PURM composites were similar the values of pure PURM, mainly the PURM-PV5 and PURM-PV10. Therefore, these composites can be applied like thermal insulator; furthermore, their use could reduce the production costs and to preserve the environment

Fabrication, structural characterization, and applications of Langmuir and Langmuir-Blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO2 in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed clean method and the polymers obtained are named NIPUs (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per met unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.

Molecular architecture of thin films fabricated via physical vapor deposition and containing a poly(azo)urethane

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of castor oil based polyurethane films prepared with N-methyl-2-pyrrolidinone as a solvent

Molecular mobility in castor oil based polyurethane was investigated with thermally stimulated depolarization current (TSDC) measurements and alternating-current (ac) dielectric relaxation spectroscopy. Three peaks could be observed in TSDC thermograms from 173 to 373 K. The relaxation located at 213 K could be attributed to the change in the molecular chain due to the interaction between the isocyanate and the solvent, and it was well fitted with the Vogel-Fulcher-Tammann equation. The other two peaks were located at 274 and 365 K and could be attributed to interfacial polarization and space charge, respectively. (c) 2005 Wiley Periodicals, Inc.

Analysis of dipolar relaxation in polyurethane/polyaniline blend

Thin films of blend made up of castor oil-based polyurethane (PU) and polyaniline (PANI) were obtained by casting. The molecular mobility was studied using dielectric spectroscopy and thermally stimulated depolarization current (TSDC) for blends with two different compositions (90/10, 80/20) and the results were compared with PU pure. The peak located around -60 degrees C in TSDC thermograms of PU/PANI blend has dipolar behavior and might be attributed to the change in the molecular chain due to the interaction between isocyanate and the solvent. Vogel-Fulcher Tammann fits was performed on the observed relaxation and the result shows a alpha-relaxation-like. (c) 2005 Springer Science + Business Media, Inc.

Suicide nucleophilic attack: Reactions of benzohydroxamate anion with bis(2,4-dinitrophenyl) phosphate

(Chemical Equation Presented) The reaction between the benzohydroxamate anion (BHO-) and bis(2,4-dinitrophenyl)phosphate (BDNPP) has been examined kinetically, and the products were characterized by mass and NMR spectroscopy. The nucleophilic attack of BHO- follows two reaction paths: (i) at phosphorus, giving an unstable intermediate that undergoes a Lossen rearrangement to phenyl isocyanate, aniline, diphenylurea, and O-phenylcarbamyl benzohydroxamate; and (ii) on the aromatic carbon, giving an intermediate that was detected but slowly decomposes to aniline and 2,4-dinitrophenol. Thus, the benzohydroxamate anion can be considered a self-destructive molecular scissor since it reacts and loses its nucleophilic ability. © 2009 American Chemical Society.

The mechanism of dephosphorylation of bis(2,4-dinitrophenyl) phosphate in mixed micelles of cationic surfactants and lauryl hydroxamic acid

(Figure Presented) Mixed micelles of cetyltrimethylammonium bromide (CTABr) or dodecyltrimethylammonium bromide (DTABr) and the α-nucleophile, lauryl hydroxamic acid (LHA) accelerate dephosphorylation of bis(2,4-dinitrophenyl) phosphate (BDNPP) over the pH range 4-10. With a 0.1 mole fraction of LHA in DTABr or CTABr, dephosphorylation of BDNPP is approximately 10 4-fold faster than its spontaneous hydrolysis, and monoanionic LHA - is the reactive species. The results are consistent with a mechanism involving concurrent nucleophilic attack by hydroxamate ion (i) on the aromatic carbon, giving an intermediate that decomposes to undecylamine and 2,4-dinitrophenol, and (ii) at phosphorus, giving an unstable intermediate that undergoes a Lossen rearrangement yielding a series of derivatives including N,N-dialkylurea, undecylamine, undecyl isocyanate, and carbamyl hydroxamate. © 2009 American Chemical Society.

Poliuretana contendo corante azóico e espaçador tipo bis-carbonato como material para fabricação de filmes nanoestruturados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Synthesen und Charakterisierungen Arylamin-haltiger Polymere: multifunktionelle hoch-T g-Copolymere für photorefraktive Anwendungen

Zusammenfassung Die vorliegenden Arbeit beschäftigt sich mit den Synthesen und Charakterisierungen multifunktioneller, Arylamin-haltiger Polymere, welche sich als photorefraktive(PR)-Materialien eignen. Die Glastemperaturen (Tg) der angestrebten Materialien liegen deutlich über Raumtemperatur, um so den Pockels-Mechanismus zum Aufbau des PR-Effektes zu favorisieren. Hierzu sind zwei synthetische Konzepte, basierend auf Maleinimid-Methylvinylisocyanat-Reaktiv-Polymeren und Triphenylamin-haltigen Polymeren, entwickelt worden. Im Rahmen des Reaktiv-Polymer-Konzeptes konnten PR-Materialien mit den bisher größten Beugungs-Effizienzen sowie den schnellsten Ansprechzeiten für multifunktionelle hoch-Tg-Polymere dargestellt werden. Hierfür wurden Maleinimid-Methylvinylisocyanat-Reaktiv-Polymere synthetisiert welche an der Imid-Position über Spacer-Gruppen mit Carbazol-Einheiten funktionalisiert sind. Die Tg´s der Polymere konnten zwischen 60°C und 194°C eingestellt werden. Die Isocyanat-Gruppen wurden dann polymeranlog mit hydroxyalkyl-funktionalisierten Chromophoren umgesetzt. Die Kinetik des PR-Effektes dieser Materialien wird durch die Ladungsträger-Beweglichkeiten in den Proben bestimmt. Eine Steigerung der Farbstoff-Konzentrationen erhöht die PR-Leistungen der Materialien, behindert jedoch deren Kinetik.Das Triphenylamin-Polymer-Konzept verwendet Triphenylamine als Lochleiter. Hierfür wurden die radikalischen Polymerisations-Verhalten der Monomere p-Diphenylaminostyrol (DPAS) und erstmals p-Ditoluylaminostyrol (DTAS) untersucht. Die Monomere wurden durch spontane, freie und kontrollierte radikalische Verfahren polymerisiert. Mittels eines TEMPO-Derivates gelang der Aufbau von Block-Copolymeren. Poly-DPAS konnte, im Gegensatz zu Poly-DTAS, polymeranlog tricyanovinyliert werden. Dadurch lassen sich PDPAS-block-PTPAS-Copolymere selektiv im PDPAS-Block tricyanovinylieren. Diese Materialien weisen eine Tendenzen zur Mikro-Phasen-Separation auf.Die Strukturierung von PDPAS konnte durch Photo-Polymerisation mit einer Auflösung von wenigen mm demonstriert werden. Carbazol und Triphenylamin-haltige Materialien wurden mittels Cyclo-Voltametrie untersucht.

Additions- und Umlagerungsreaktionen des Lewis-aciden Dihypersilylplumbandiyls in Umsetzungen mit monodenten und ambidenten Lewis-Basen

Die chemische Reaktivität des Dihypersilylplumbylens Pb[Si(Si(CH3)3)3]2 wird durch seine besondere elektronische Struktur bestimmt. Im Unterschied zu Carbenen (Triplett-Grundzustand) liegen Plumbylene im Grundzustand als Singulett vor, mit einem energetisch hochliegenden HOMO (freies Elektronenpaar mit hohem s-Charakter) und einem tiefliegenden LUMO (näherungsweise: freies p-Orbital des Pb-Atoms). Daraus resultiert das amphotere Lewis-Säure/Lewis-Base-Verhalten der Verbindung, mit der Besonderheit, dass sich die beiden Lewis-Zentren am selben Atom befinden. rnIn Umsetzungen mit monodenten und ambidenten Lewis-Basen wurden die Lewis-aciden Eigenschaften des Dihypersilylplumbandiyls Pb[Si(Si(CH3)3)3]2 untersucht. Reaktionen mit den sterisch anspruchsvollen O-Nucleophilen KOtBu (Kalium-tert-Butanolat) und KOiPrPh (4-Kaliumisopropylphenolat) führten bei tiefen Temperaturen zur primären Adduktbildung. Die aus der Strukturanalyse erhaltenen Bindungsdaten zeigen die extreme sterische Überfrachtung des zentralen Blei-Atoms. Der Abbau der sterischen Spannung ist möglicherweise die Ursache für offensichtlich stattfindende Umlagerungsfolgereaktionen (bei Reaktionsführungen bei T>-60°C), die aufgrund spektroskopische Untersuchungen zu vermuten sind.rnEingehender wurden diese Umlagerungsreaktionen in Umsetzungen des Pb[Si(Si(CH3)3)3]2 mit ambidenten Lewis-Basen untersucht. In Übereinstimmung und Erweiterung mit früheren Ergebnissen von Klinkhammer (K. Klinkhammer, Polyhedron, 2002, 21, 587) konnte beispielsweise die Migration einer (mit der ambidenten Lewis-Base tert-Butylisonitril) bzw. beider Hypersilylgruppen (mit p-Tolylisocyanat) unter Bildung hetero- bzw. homoleptischer Plumbylene nachgewiesen werden.rnReaktionen des Pb[Si(Si(CH3)3)3]2 mit den anorganischen ambidenten Salz-Ionen CN-, OCN-, SCN-, N3-, NO2- führen zur Bildung salzartiger Plumbanide der Zusammensetzung Me{Pb[Si(Si(CH3)3)3]2}Nu (Me: Na bzw. K, Nu: CN, OCN, SCN, N3, NO2). Die Verbindungen liegen im Kristall monomer als Kontaktionenpaar vor. Auf diese Weise gelang erstmalig die gezielte Synthese eines Blei(II)cyanids sowie die Darstellung eines Blei(II)isocyanats. rn

The curtius rearrangement of acyl azides revisited - formation of cyanate (R-O-CN)

The Curtius rearrangement is a synthesis of isocyanates (R-N=C=O) by thermal or photochemical rearrangement of acyl acides and/or acylnitrenes. The photochemical rearrangement of benzoyl azide is now shown for the first time to produce a small amount of phenyl cyanate (Ph-O-CN) together with phenyl isocyanate.

Caratterizzazione dei fenotipi e della risposta infiammatoria delle vie aeree nell'asma da isocianati

RIASSUNTO Premesse: Nonostante l’asma sia stata considerata per anni come un’unica malattia, studi recenti ne dimostrano l’eterogeneità. L’intento di caratterizzare tale eterogeneità ha condotto a studiare molteplici sottogruppi ovvero “fenotipi”. Nell’asma comune questo approccio è stato utilizzato da svariati anni, meno invece nell’asma occupazionale. Poco è noto anche riguardo alle caratteristiche della risposta infiammatoria nel corso dei test di provocazione bronchiale specifici (SIC) con isocianati valutata con metodiche non invasive; in particolare l’origine dell’incremento di ossido nitrico misurato ad un flusso espiratorio di 50 ml/s (FeNO50) precedentemente riscontrato, se sia alveolare o bronchiale, i livelli di dimetilarginina asimmetrica (ADMA) e la temperatura dell’aria espirata (EBT). Scopi dello studio: 1) verificare se anche per l’asma occupazionale (OA) da isocianati siano individuabili dei fenotipi o se essa ne rappresenti uno unico 2) studiare l’infiammazione delle vie aeree sperimentalmente indotta tramite:  la misurazione dell’NO frazionato mediante i parametri “flow-independent” che stimano sia la regione alveolare, ovvero la concentrazione di NO alveolare (CaNO), che la regione bronchiale ovvero il flusso di NO a livello bronchiale (JawNO), la concentrazione di NO a livello della parete bronchiale (CawNO) e la diffusione di NO all’interfaccia lume-parete bronchiale (DawNO);  la misurazione dell’ADMA nel condensato dell’aria esalata (EBC);  la misurazione dell’EBT. Materiali e metodi: Per lo studio sulla fenotipizzazione dell’asma da isocianati sono stati esaminati pazienti risultati positivi al test di provocazione bronchiale specifico con isocianati nel periodo compreso tra il 1988 e il 2013. Mediante l’utilizzo di un approccio multivariato dato dall’analisi gerarchica dei cluster e di un ampio pool di variabili appropriate abbiamo studiato se i soggetti affetti da asma professionale da isocianati rappresentino uno o più cluster. Mediante un altro approccio multivariato, dato dall’analisi delle k-medie, si sono individuate le caratteristiche che differenziano in maniera significativa i soggetti distribuiti nei diversi cluster. Per il secondo scopo dello studio dal 2012 al 2015 abbiamo reclutato soggetti afferiti presso il nostro centro per sospetta asma professionale. In questi pazienti in corso di sham-test e di SIC con isocianati fino a 24 post test sono stati monitorati e misurati: la funzionalità respiratoria incluso il test di provocazione bronchiale aspecifico con metacolina, l’NO frazionato, l’ADMA nell’EBC e l’EBT. Risultati: L’utilizzo dell’analisi gerarchica dei cluster ci ha portati a stabilire che i 187 pazienti studiati non costituiscono un unico gruppo omogeneo ma possono essere suddivisi in 3 cluster. L’applicazione poi del metodo multivariato delle k-medie, su tre cluster, ci ha consentito di individuare due cluster di pazienti sensibilizzati a TDI con prevalente risposta late al SIC e un cluster di pazienti sensibilizzati a MDI con prevalente risposta early al SIC. I soggetti appartenenti ai due cluster dei TDI differiscono fra di loro in maniera significativa per l’età alla diagnosi e all’esordio dei sintomi respiratori, la distribuzione per sesso, il BMI, la distribuzione in quanto abitudine al fumo, l’IT, il FEV1 basale % del predetto, l’età di inizio esposizione, gli anni di latenza e la durata dell’esposizione. Per quanto riguarda invece lo studio del profilo infiammatorio delle vie aeree abbiamo reclutato 25 pazienti, 18 maschi e 7 femmine. Nel gruppo dei SIC-positivi FeNO50 è aumentato significativamente a 24 ore dal test (mediana 111.8 ppb [IQR, 167.5]; p<0.05) se confrontato con lo sham (58.6 ppb [74.7]). I livelli di JawNO hanno manifestato il medesimo time-course con un incremento significativo post 24 ore dall’esposizione (6.6 nL/s [81]; p <0.05) se confrontato con lo sham (3.3 nL/s [3.7]). Non sono state riscontrate significative variazioni negli altri parametri. Non sono state riscontrate significative variazioni dell’ADMA nell’EBC e dell’EBT in entrambi i gruppi. Conclusioni: L’asma da isocianati è una patologia eterogenea come l’asma comune. Gli elementi principali che differenziano i cluster di asma professionale da isocianati sono l’agente sensibilizzante e il tipo di risposta al SIC (cluster 3 vs cluster 1 e 2). Anche nell’ambito dell’asma indotta dallo stesso agente (TDI) si sono evidenziati due cluster in cui quello con peggiore funzionalità respiratoria è rappresentato da soggetti più anziani alla diagnosi e con maggiore durata dell’esposizione. I motivi per cui l’asma occupazionale risulta essere eterogenea possono essere un differente meccanismo d’azione dei monomeri o una diversa suscettibilità degli individui appartenenti ai diversi cluster sia in termini di insorgenza della malattia sia in termini di evoluzione della stessa. L’assetto infiammatorio delle vie aeree nel corso del SIC non si caratterizza nei soggetti sensibilizzati ad isocianati né con un incremento dell’ADMA né con un incremento dell’EBT. Si riscontra invece un aumento di FeNO50 dovuto esclusivamente ad un aumentato flusso di NO dalla parete bronchiale al lume. Abbiamo perciò dimostrato che la misurazione del FeNO50 nel corso del SIC può fornire informazioni aggiuntive al monitoraggio funzionale spirometrico, anche perché la broncoostruzione e la risposta infiammatoria delle vie aeree si sono rivelate dissociate.

Design of experiments to optimized the determination of TDIs in agglomerated cork stoppers

Isocyanates are included into a class with an extreme commercial importance because their use in the manufacture of polyurethanes. Polyurethanes are used in several applications such as adhesives, coatings, foams, thermoplastics resins, printing inks, foundry moulds and rubbers. Agglomerated cork stoppers are currently used for still wines, semi-sparkle and gaseous wines, beer and cider. Methylene diphenyl diisocyanate (MDI) is presently the isocyanate used in the production of polyurethane based adhesive in use due to its lowest toxicity comparing with toluene diisocyanate (TDI) previously employed. However, free monomeric TDI or MDI, depending on the based polyurethane, can migrate from agglomerated cork stoppers to beverages therefore it needs to be under control. The presence of these compounds are usually investigated by HPLC with Fluorescence or UV-Vis detector depending on the derivatising agent. Ultra Performance Liquid Chromatography with Diode Array Detector (UPLC-DAD) method is replacing HPLC. The objective of this study is to determine which method is better to analyze isocyanates from agglomerated cork stoppers, essentially TDI to quantify its monomer. A Design of Experiments (DOE) with three factors, column temperature, flow and solvent, at two levels was done. Eight experiments with three replications and two repetitions were developed. Through an ANOVA the significance of the factors was evaluated and the best level’s factors were selected. As the TDI has two isomers and in this method these two isomers were not always separated an ANOVA with results of resolution between peaks was performed. The Design of Experiments reveals to be a suitable statistical tool to determine the best conditions to quantified free isocyanates from agglomerated cork stoppers to real foodstuff. The best level’s factors to maximize area was column temperature at 30ºC, flow to 0,3 mL/min and solvent 0,1% Ammonium Acetate, to maximize resolution was the same except the solvent that was 0,01% Ammonium Acetate.

Interference lithography for optical devices and coatings

Interference lithography can create large-area, defect-free nanostructures with unique optical properties. In this thesis, interference lithography will be utilized to create photonic crystals for functional devices or coatings. For instance, typical lithographic processing techniques were used to create 1, 2 and 3 dimensional photonic crystals in SU8 photoresist. These structures were in-filled with birefringent liquid crystal to make active devices, and the orientation of the liquid crystal directors within the SU8 matrix was studied. Most of this thesis will be focused on utilizing polymerization induced phase separation as a single-step method for fabrication by interference lithography. For example, layered polymer/nanoparticle composites have been created through the one-step two-beam interference lithographic exposure of a dispersion of 25 and 50 nm silica particles within a photopolymerizable mixture at a wavelength of 532 nm. In the areas of constructive interference, the monomer begins to polymerize via a free-radical process and concurrently the nanoparticles move into the regions of destructive interference. The holographic exposure of the particles within the monomer resin offers a single-step method to anisotropically structure the nanoconstituents within a composite. A one-step holographic exposure was also used to fabricate self- healing coatings that use water from the environment to catalyze polymerization. Polymerization induced phase separation was used to sequester an isocyanate monomer within an acrylate matrix. Due to the periodic modulation of the index of refraction between the monomer and polymer, the coating can reflect a desired wavelength, allowing for tunable coloration. When the coating is scratched, polymerization of the liquid isocyanate is catalyzed by moisture in air; if the indices of the two polymers are matched, the coatings turn transparent after healing. Interference lithography offers a method of creating multifunctional self-healing coatings that readout when damage has occurred.