Mossbauer spectroscopic study of R3Fe29-xCrx and R3Fe29-xCrxH,(y)(R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

Fe-57 Mossbauer spectra for the series of R3Fe29-xCrx (R = Y,Ce, Nd, Sm, Gd, Tb, and Dy) compounds and their hydrides have been measured at 4.2 K. The weighted average hyperfine field at the Fe sites was separated into a 3d-electron contribution, proportional to the average Fe moment, and a transferred contribution due to rare earth moments. The latter was found to increase with the rare earth effective spin (g(J) - 1) J. Hyperfine fields in the hydrides were only slightly larger than in the corresponding alloys.

Photoluminescence of ZnO : Tb nanoparticles

Terbium-doped zinc oxide nanoparticles have been prepared by hydrolyzing zinc acetate and terbium acetate. Nanoparticle-matrix-facilitated photoluminescence which is related to Tb3+ ions has been observed for ZnO:Tb nanoparticles. The dependence of emission intensity on doping concentration of Tb3+ ions has been investigated. An energy transfer from excited states of ZnO hosts to dopants is disclosed by the fact that the emission intensity of Tb3+ centers increases with increasing Tb content at the expense of emission from defect states in ZnO matrix.

Fe-57 Mossbauer spectroscopic and magnetic studies of R3Fe29-xVx (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

Mossbauer spectra for Fe atoms in the series of R3Fe29-xVx (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy) compounds were collected at 4.2 K. The ratio of 14.5 T/mu(B) between the average hyperfine field B-hf and the average Fe magnetic moment mu(Fe)(MS), obtained from our data, in Y3Fe29-xVx is in agreement with that deduced from the RxTy alloys by Gubbens et al. The average Fe magnetic moments mu(Fe)(MS) in these compounds at 4.2 K, deduced from our Mossbauer spectroscopic studies, are in accord with the results of magnetization measurement. The average hyperfine field of the Fe sites for R3Fe29-xVx at 4.2 K increases with increasing values of the rare earth effective spin (g(J) - 1) J, which indicates that there exists a transferred spin polarization induced by the neighboring rare earth atom.

Mossbauer spectroscopy study of Fe-57 in R3Fe29-xTx (R=Y, Ce, Nd, Sm, Gd, Tb and Dy; T=V and Cr)

Fe-57 Mossbauer spectra for the Fe atoms in the R3Fe29-xTx (R=Y, Ce, Nd, Sm, Gd, Tb, Dy; T=V, Cr) compounds were collected at 4.2 K. The analysis of Mossbauer spectra was based on the results of magnetization and neutron powder diffraction measurements. The average Fe magnetic moments at 4.2 K, deduced from our data, are in accord with magnetization measurements. The average hyperfine field of Tb3Fe29-xCrx (x=1.0, 1.5, 2.0, and 3.0) decreases with increasing Cr concentration, which is also in accordance with the variation of the average Fe magnetic moment in the Tb3Fe29-xCrx compounds.

Crystallographic and magnetic properties of hydride R3Fe29-xTxHy (R=Y, Ce, Nd, Sm, Gd, Tb and Dy; T=V and Cr)

The crystallographic and intrinsic magnetic properties of hydride R3Fe29-xTxHy (R=Y, Ce, Nd, Sm, Gd, Tb, and Dy; T=V and Cr) have been investigated. The lattice constants and the unit cell volume of R3Fe29-xTxHy decrease with increasing R atomic number from Nd to Dy, except for Ce, reflecting the lanthanide contraction. Regular anisotropic expansions, mainly along the a- and b-axis rather than along the c-axis, are observed for all the compounds upon hydrogenation. Hydrogenation leads to an increase in Curie temperature. First-order magnetization processes (FOMP) occur in magnetic fields of around 1.5 T and 4.0 T at 4.2 K for Nd3Fe24.5Cr4.5H5.0 and Tb(3)Fc(27.0)Cr(2.0)H(2.8), and around 1.4 T at room temperature for Gd3Fe28.0Cr1.0H4.2 Abnormal crystallographic and magnetic properties of Ce3Fe29-xTxHy suggest that the Ce ion is non-triply ionized.

Hydrogenation and anisotropic expansions in R3Fe29-xTx (R = Y, Ce, Nd, Sm, Gd, Tb and Dy; T = V and Cr)

A systematic study of the phase formation, structure and magnetic properties of the R3Fe29-xTx compounds (R=Y, Ce, Nd, Sm, Gd, Tb, and Dy; T=V and Cr) has been performed upon hydrogenation. The lattice constants and the unit cell volume of R3Fe29-xTxHy decrease with increasing R atomic number from Nd to Dy, except for Ce, reflecting the lanthanide contraction. Regular anisotropic expansions mainly along the a- and b-axis rather than along the c-axis are observed for all of the compounds upon hydrogenation. Hydrogenation leads to an increase in the Curie temperature and a corresponding increase in the saturation magnetization at room temperature for each compound. First order magnetization processes (FOMP) occur in the external magnetic fields for Nd3Fe24.5Cr4.5H5.0, Tb3Fe27.0Cr2.0H2.8, and Gd3Fe28.0Cr1.0H4.2 compounds.

Structural and magnetic properties of hydrides R3Fe29-xVxHy (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

A systematic investigation of crystallographic and intrinsic magnetic properties of the hydrides R3Fe29 - xVxHy (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed in this work. The lattice constants a, b, and c and the unit cell volume of R3Fe29 - xVxHy decrease with increasing rare-earth atomic number from Nd to Dy, except for Ce, reflecting the lanthanide contraction. Hydrogenation results in regular anisotropic expansions along the a-, b-, and c-axes in this series of hydrides. Abnormal crystallographic and magnetic properties of Ce3Fe27.5V1.5H6.5, like Ce3Fe27.5V1.5, suggest that the Ce ion is non-triply ionized. Hydrogenation leads to the increase in both Curie temperature for all the compounds and in the saturation magnetization at 4.2 K and RT for R3Fe29 - xVx with R = Y, Ce, Nd, Sm, Gd, and Dy, except for Tb. Hydrogenation also leads to a decrease in the anisotropy field at 4.2 K and RT for R3Fe29 - xVx with R = Y, Ce, Nd, Gd, Tb, and Dy, except for Sm. The Ce3Fe27.5V1.5 and Gd3Fe28.4V0.6 show the larger storage of hydrogen with y = 6.5 and 6.9 in these hydrides. (C) 1998 Elsevier Science B.V. All rights reserved.

Crystallographic and magnetic properties of the hydrides R3Fe29-xCrxHy (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

A systematic study of the structural and intrinsic magnetic properties of the hydrides R3Fe29-xCrxHy (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. Hydrogenation lends to a relative volume expansion of the unit cell and a decrease in x-ray density for each compound. Anisotropic expansions mainly along the n- and b-axes rather than along the c-axis for all of the compounds upon hydrogenation are observed. The lattice constants and the unit-cell volume of R3Fe29-xCrx and R3Fe29-xCrxHy decrease with increasing R atomic number from Nd to Dy, except for Ce, reflecting the lanthanide contraction. Hydrogenation results in an increase in the Curie temperature and a corresponding increase in the saturation magnetization at room temperature for each compound. After hydrogenation a decrease of 0.34 mu(B)/Fe in the average Fe atomic magnetic moment and a slight increase in the anisotropy field for Y3Fe27.2Cr1.8 are achieved at 4.2 K. First-order magnetization processes (FOMP) occur in magnetic fields of around 1.5 T and 4.0 T at 4.2 K for Nd3Fe24.5Cr4.5H5.0 and TD3Fe27.0Cr2.0H2.8, and around 1.4 T at room temperature for Gd3Fe28.0Cr1.0H4.2. The abnormal crystallographic and magnetic properties of Ce3Fe25.0Cr4.0 and Ce3Fe25.0Cr4.0H5.4 suggest that the Ce ion non-triply ionized.

Crystallographic and magnetic properties of nitride R3Fe29-xCrxN4 (R = Y, Ca, Nd, Sm, Gd, Tb, and Dy)

A systematic investigation of crystallographic and magnetic properties of nitride R3Fe29-xCrxN4 (R=Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. The lattice constants and unit cell volume decrease with increasing rare earth atomic number from Nd to Dy, reflecting the lanthanide contraction. After nitrogenation the relative volume expansion of each nitride is around between 5% and 7%. The nitrogenation results in a good improvement in the Curie temperature, the saturation magnetization and anisotropy fields at 4.2 K, and room temperature for R3Fe29-xCrxN4. Magnetohistory effects of R3Fe29-xCrxN4 and R3Fe29-xCrx (R=Nd and Sm) are observed in a low field of 0.04 T. First order magnetization process occurs in Sm3Fe24.0Cr5.0N4 in magnetic fields of 2.8 T at 4.2 K. After nitrogenation, the easy magnetization direction of Sm3Fe24.0Cr5.0 is changed from the easy-cone structure to the uniaxial. The good intrinsic magnetic properties of Sm3Fe24.0Cr5.0N4 make this compound a hopeful candidate for new high-performance hard magnets. (C) 1998 American Institute of Physics.

Crystallographic and magnetic properties of R3Fe29-xVxN4 (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy)

A systematic investigation of crystallographic and magnetic properties of nitride R3Fe29-xVxN4 (R = Y, Ce, Nd, Sm, Gd, Tb, and Dy) has been performed. Nitrogenation leads to a relative volume expansion of about 6%. The lattice constants and unit cell volume decrease with increasing rare-earth atomic number from Nd to Dy, reflecting the lanthanide contraction. On average, the Curie temperature increases due to the nitrogenation to about 200 K compared with its parent compound. Generally speaking, nitrogenation also results in a remarkable improvement of the saturation magnetization and anisotropy fields at 4.2 K and room temperature for R3Fe29-xVxN4 compared with their parent compounds. The transition temperature indicates the spin reorientations of R3Fe29-xVxN4 for R = Nd and Sm are at around 375 and 370 K which are higher than that of R3Fe29-xVx, for R = Nd and Sm 145 and 140 K, respectively. The magnetohistory effects of R3Fe29-xVxN4 (R = Ce, Nd, and Sm) are observed in low fields of 0.04 T. After nitrogenation the easy magnetization direction of Sm3Fe26.7V2.3 is changed from an easy-cone structure to the b-axis. As a preliminary result, a maximum remanence B-r of 0.94 T, an intrinsic coercivity mu(0)H(C) of 0.75 T, and a maximum energy product (B H)(max) of 108.5 kJ m(-3) for the nitride magnet Sm3Fe26.7V2.3N4 are achieved by ball-milling at 293 K.

新型绿色荧光体ABLa(PO_4)_2:Ce, Tb研究(A = K, Na; B = Mg, Zn)

本工作完成了磷酸盐化合物ABLa(PO_4)_2的合成，这些磷盐均可在900 ℃左右合成；对其进行了结构测试与表征，发现这些磷酸盐属于单斜晶系独居石结构，与LaPO_4同构，具有很相近的晶胞参数；系统地研究了RE~(3+)离子(RE = Ce,Tb,Dy)在ABLa(PO_4)_2基质中的发光与能量传递规律，研究了Ce~(3+)、Tb~(3+)离子发光中心与基质晶格之间的相互作用，计算了这些稀土离子之间能量传递的临界距离Rc(dd)，结果表明ABLa(PO_4)_2基质中Ce~(3+)离子与基质晶格之间的相互作用属于中等程度耦合，Tb~(3+)离子与基质晶格之间的相互作用属于无辐射多声子过程，Ce~(3+)→Ce~(3+)、Ce~(3+)→Tb~(3+)能量迁移临界距离均与LaPO_4中相近，Ce~(3+) → Ce~(3+)相对于Ce~(3+) → Tb~(3+)属于快过程，Ce~(3+) → Ce~(3+)能量传递对ABLa(PO_4)_2:Ce,Tb荧光体的Tb~(3+)绿色发光起了重要的作用，ABLa(PO_4)_2基质是Ce~(3+)，Ce~(3+)-Tb~(3+)，Ce~(3+)-Dy~(3+)的优良发光基质；最后探讨了绿色荧光体ABLa(PO_4)_2:Ce，Tb的调制途径，主要研究了Ce~(3+)、Tb~(3+)离子的浓度效应，掺杂B_2O_3、Dy~(3+)、SiO_2对荧光体发光的影响及NH_4Cl的作用，结果表明Ce~(3+)、Tb~(3+)离子的适宜浓度分别为0.2～0.5和0.08～0.2，掺杂适量的B_2O_3、Dy~(3+)能很好地提高荧光体的发光，掺杂SiO_2、NH_4Cl不利荧光体发光。

多氟稀土（Sm、Tb）有机配合物的合成及发光性质的研究

本文合成了几种多氟β-二酮配合物，并将其引入无机／有机杂化基质及中孔分子筛材料中，从而制备了发光性能良好的杂化材料。选用新型的多氟β-二酮作为有机配体，合成了几种衫、试配合物，通过IR、1H NMR等手段证实了配合物的生成，并研究了其发光性质。首次得到了以4,4,5,5,6,6,6-七氟-1-2-噻吩基）-1-已二酮（HTH）为配体的衫的配合物单晶（Sm（HT）3Phen），解析了其结构，结果表明其配位多面体为三角十二面体。将多氟三元配合物Tb（Tfacac）3phen通过溶胶一凝胶过程掺杂到γ-缩水甘油丙基醚三甲氧基硅烷（GPTMS）改性的有机／无机杂化基质中，制备了有机／无机杂化发光块状材料一及其薄膜材料；研究了稀土配合物在未改性基质和改性基质中的发光性质，以及不同基质对发光性能的影响，结果发现该杂化材料最大激发峰位相对于纯配合物发生了蓝移，且激发谱带变窄；考察了两种基质中配合物掺杂浓度对杂化材料的发光强度的影响，结果表明。稀土配合物在改性基质中比在未改性基质中掺杂浓度提高了。比较了粉末材料与相应薄膜的发光性能，发现薄膜材料巴的发光强度和荧光寿命有所降低，表明材料的不同状态对其发光性能有一定的影响。制备了中孔分子筛MCM-41及GPTMS、TMSPMC改性的有机／无机杂化中孔材料。回时成功地将稀土配合物Sm（HTH）3Phen、Tb（Tfacac）3Phen组装到MCM-41及两种改性的MCM-41中，合成了担载新型稀土有机配合物的无机-有机杂化中孔发光材料。通过对稀土配合物及其在分子筛中的荧光光谱分析，发现激发光谱发生了蓝移；而且不同的改性剂对不同的稀土配合物的影响不同。并制得了发光色纯度较高的稀土-TMSPMC-MCM-41复合发光体。

稀土发光材料M_2O_3:RE~(3+)（M＝Y，Gd:RE＝Eu，Tb）体系的AAO模板组装

AAO模板具有高度有序的纳米孔阵列，其孔径可以在5一200nm范围内调节，利用AAO模板进行纳米组装已成为纳米结构材料组装的重要技术之一。目前，采用该技术已经制备出了金属、半导体、碳、导电高分子以及其它材料构成的纳米管、纳米线、纳米纤维、电缆等纳米结构单元和有序纳米阵列材料，同时，研究了它们的光、电、磁和催化等特性及其在光学材料、铿电池的电极材料、垂直磁性记录材料和光催化剂等方面的潜在应用。然而，有关稀土发光材料的AAO模板合成及其性质还鲜见报道。本论文采用二次阳极氧化技术制备出了具有高度有序纳米阵列孔的AAO模板。采用溶胶一凝胶法和水热法对稀土发光材料M2O3:RE3+（M＝Y,Gd; RE＝Eu，Tb）体系进行了AAO组装，得到了纳米线、纳米管及其纳米线阵列。对AAO模板和组装样品的形貌、结构和光谱性质进行了表征，得到了一些令人感兴趣的研究结果，其主要的结果和结论总结如下：（1）采用二次阳极氧化法制备出了孔径约为5Onm、35nm和2Onm等系列高度有序纳米阵列孔的基体铝支持的AAO模板和独立支撑的AAO模板。（2）XRD测试结果表明：退火后的基体铝片，其331晶面优先结晶生长，这有利于高度有序纳米阵列孔AAO模板的制备。使用这些退火后的铝片，通过二次阳极氧化法制备的高度有序纳米阵列孔AAO膜为非晶态，并且在退火后转变为γ-Al2O3。（3）未退火的基体铝支持的AAO模板，在350一600nm范围内发出较强的蓝光，其峰值波长位于435nm。该蓝光发射带经过程序控温慢慢退火后完全消失，这说明它产生于缺陷发光中心。（4）采用溶胶一凝胶法，利用AAO模板首次合成出了（YO.96RE0.05）O3（RE＝Eu，Tb）纳米线及其阵列，并通过SEM、EDX、TEM、SAED、XRD和PL分析测试加以确认。x-射线衍射（XRD）和选区电子衍射（SAED）的结果证明，这些纳米线主要是由立方相的RE2O3（RE＝Y或Gd）多晶材料组成的。光谱测试结果表明，同体相材料相比，Eu3＋的，D0一7F2跃迁发射峰和Tb3＋的5D4一7FJ（J=6，5，4，3）跃迁发射峰出现了宽化，这种现象可能是纳米颗粒的表面界面效应所引起的非均匀宽化造成的。（5）首次观察到利用溶胶一凝胶法组装的一部分M2O3:RE3＋（M＝Y，Gd；RE＝Eu，Tb）样品，沿着AAO模板阵列孔壁的边沿所形成的网状结构，并初步地探讨了其形成的机理。（6）对于M2O3:RE3＋（M=Y，Gd；RE＝Eu，Tb）体系，仅仅依靠毛细作用是难以充分地将溶胶前驱液组装进从O模板的阵列孔中。（7）首次利用水热合成法，在中性条件介质下，将（Y，Gd）2O3:Eu3+样品充分地组装进了AAO模板的纳米孔道中，这说明水热产生的高压可以作为AAO模板组 装样品的驱动力。（8）以M2O3: RE3+（M＝Y，Gd；RE＝Eu，Tb）溶胶或氢氧化物沉淀作为前驱物，分别在酸性和碱性条件下，进行了从0模板水热合成组装。实验结果表明，AAO模板被部分地损坏。但在碱性条件下的高压釜中，却得到了单晶纳米管、纳米片和纳米棒。

P_(507)萃取分离Gd、Tb、Dy三出口工艺及多元稀土萃取分离数学模拟的研究

溶剂分馏萃取是分离、提纯、富集物质的有效方法之一，由于它具有分离效果好，易于操作等优点。因此，在稀土萃取分离工艺中得到了广泛的应用。但是，每个分馏萃取工艺只能分离两个组份，若要分离所有稀土元素，流程较长。为改进生产，本工作提出了一种三出口萃取分离工艺流程。这种工艺流程可视为由两个萃取段和两个洗涤段组成，由于在两个洗涤段中，两相稀土浓度较高、稀土交换量较大，故可使级数减少。采用此工艺流程进行了P_(507)萃取分离Gd、Tb、Dy三组元素的串级模拟实验，得到了纯度大于99.99％的La－Gd，纯度大于99.8％的Dy－Lu和含量高于65％的Tb_4O_2富集物。Tb的收率大于95％。串级总级数为38级。通过对P_(507)萃取实际体系中稀土元素行为的研究，建立了多元体系中稀土在两相分配的经验模型。Z＝C_1H~(C2)×T~(C_3)e~(c_4X(Tb)+C_5X(Dy))和具有一定物理意义的半热力学半经验模型。YT=(Z/H)~3[Σ from i=1 to m of CiXi + Co]根据氨化P_(507)萃取工艺中稀土总浓度在两相的分布规律，提出了一种适合氨化P_(507)萃取分离多元混合稀土工艺的串级计算方法，并用FORTRAN语言编写 了计算程序。使用自编的计算程序进行了氨化P_(507)萃取分离Gd、Tb、Dy三出口工艺的串级模拟计算，计算结果与实验值基本一致。同时，对文献中报导的中间某级开设出口的一分三工艺也进行了串级计算，根据计算结果讨论了两种工艺的优缺点。对恒定混合萃取比的多元稀土萃取分离工艺，进行了在不同串级条件下分界元素在各级的积累及易萃组份和难萃取份的有效分离系数在各级变化规律的计算。结果表明，有效分离系数在级体中出现一极小值β~*，并且β~*值的大小与其出现在级体中的位置随条件不同而改变。对同一萃取体系，当出口产品较纯时，用线性回归分析法关联计算数据得到了β~*与出口产品组成和总萃取比的经验关系式，在萃取段有（A、B与C分离的工艺）β~*/β_B~C=C1+C2EM+C_3ln (A1)/(B1)引入有效分离系数后，进行了环烷酸萃取分离钇与镧系元素的串级模拟计算，计算结果与实验值基本吻合。