1000 resultados para INDÚSTRIA AÉREA
Resumo:
4º Congresso de Argamassas de Construção da APFAC. Coimbra, U.Coimbra, APFAC/ITeCons, 29-30 Março 2012
Resumo:
Sabe-se que aproximadamente 30% do material produzido pela indústria cerâmica é considerado desperdício e, frequentemente, depositado em aterro, com o impacto ambiental negativo que acarreta. Esta tem sido uma das grandes motivações para a crescente investigação que tem sido levada a cabo a fim de obter soluções viáveis para a sua reintrodução no processo produtivo. A viabilidade do uso de resíduos de material cerâmico tem vindo a ser avaliada, principalmente, na incorporação em betões ou em argamassas com base em cimento. Na antiguidade e na ausência de pozolanas naturais, eram frequentemente utilizados resíduos cerâmicos moídos, atuando como pozolanas artificiais e conferindo algumas características hidráulicas e de durabilidade às argamassas de cal aérea. Temse efetivamente constatado que alguns pós resultantes de desperdícios de cerâmica de barro vermelho, nomeadamente os que foram sujeitos a tratamento térmico a temperaturas inferiores a 900°C e moídos em granulometria fina, podem funcionar como pozolanas artificiais em argamassas. A introdução de resíduos de cerâmica em granulometria mais grossa nas argamassas, como agregado, pode também revelarse vantajoso, na medida em que permite substituir parcialmente a areia normalmente utilizada. Assim sendo, o recurso aos resíduos de cerâmica pode ser muito vantajoso em três vertentes principais: a redução de resíduos a depositar em aterro, a redução da extração de rochas para serem utilizadas na produção de ligantes e de areias e a produção de argamassas com comportamentos melhorados. Com o objetivo de analisar a viabilidade da introdução de resíduos de cerâmica em argamassas, que se pretendem sejam, essencialmente, adequadas como argamassas de substituição, tem vindo a ser desenvolvida investigação na Universidade de Coimbra em colaboração com a Universidade Nova de Lisboa. O trabalho que se apresenta neste artigo é uma pequena parte dessa investigação. Toda esta investigação tem tido o apoio de um projeto de investigação financiado pela FCT.
Resumo:
Nowadays, safety and security regarding the tourism and events industries are a fundamental subject to society. Portugal’s tourism has significantly increased its number of visitors, whether due to the increasing number of cruisers docking in Lisbon, or due to visitors arriving by air, travelling the country from North to South and staying in the most varied accommodation units. Issues like human security and internal security of the different countries, even the security in the world, as development factors of a modern society, are discussed on a daily basis. On the contrary, few deal with tourism and major events security as being part of internal security, as well as the existing barriers tourism encounters to integrate the system for fighting terrorism. Although two distinct activities, they are complementary and may influence the country’s economy, provided that they can offer certainty to all actors involved. It is this substance that organised crime groups look for when planning terror acts. Therefore, as tourism can offer deception and shelter opportunities and events the theatre of a possible attack, those events assemble all the necessary conditions for an attack to achieve its goals.
Resumo:
Dissertação de mestrado integrado em Engenharia e Gestão Industrial
Resumo:
Dissertação de mestrado integrado em Engenharia e Gestão Industrial
Resumo:
El present treball està basat en el desenvolupament d¿un sistema que permeti fer una demostració pràctica i útil amb els materials que l¿àrea de sistemes encastats posa a la nostra disposició. De forma resumida es tracta de motes/nodes amb possibilitat de comunicació inhalàmbrica entre ells i un sistema operatiu TinyOS programable amb el llenguatge nesC.
Resumo:
The study presented is interdisciplinary names: the presence of place names related with industrial, artisanal or mining activities in rural areas. The main hypothesis refers to this fact; the uniqueness of industrial, mining or craft in a rural area is an important reason to influence their names, a fact that gives archaeological value, remembering economic activities now disappeared. The methodology used for the study has been usually applied in onomastic studies: compilation of names from field work, oral interviews, archival work, revision of ancient documents and revision of works and studies related to the cartography of Osor. The final conclusion is that, as proposed in the hypothesis, in a rural area as the studied, the low presence of industrial, artisanal or mining activities have generated place names that have helped in keeping the memory of economic activities now disappeared
Resumo:
La Direcció General d’Indústria té com a principal finalitat el control de les instal•lacions i de diferents activitats de l’àmbit industrial; exerceix aquesta funció mitjançant la tramitació de documentacions tècniques i la inspecció. Com tota Administració Pública, es troba en un entorn molt dinàmic, on només les empreses més competitives poden subsistir i els ciutadans tenen noves necessitats molt diferents de les de fa un temps. Ambdós, empreses i ciutadans, exigeixen serveis de qualitat a un sector públic que no té altra alternativa que caminar en la mateixa direcció. L’objectiu d’aquest treball és planificar una sèrie d’accions estratègiques que permetran la millora dels serveis oferts a fi de complir amb les expectatives de la ciutadania. S’ha realitzat una anàlisi interna i de l’entorn de l’organització, el resultat de la qual ha estat la detecció d’una sèrie de punts de millora. A continuació s’ha definit una pla operatiu de qualitat, emmarcat dins del segon Pla Estratègic de Qualitat del Govern de les Illes Balears, amb tres propostes d’actuació: la separació de funcions, la tramitació ràpida d’expedients i el pla de formació. Les propostes esmentades constitueixen les bases d’una nova unitat orgànica (Oficina de Tramitació Ràpida), el model organitzatiu de la qual queda definit en els diferents apartats del treball. Igualment, s’hi descriu el procés de posada en funcionament dels distints procediments que es vagin adaptant al nou sistema i la planificació dels treballs a dur a terme, que seguiran el cicle de la qualitat de Deming, és a dir, planificar, fer, verificar i actuar.
Resumo:
A poluição do solo com elementos-traço tem sido motivo de preocupação nos últimos anos, o que justifica melhor conhecimento da disponibilidade desses elementos no ambiente, visando amenizar seus efeitos em áreas contaminadas. Este trabalho teve como objetivo avaliar o desempenho de um subproduto da indústria de alumínio como amenizante de solos contaminados com Cd e Pb. Foram utilizados um Neossolo Quartzarênico (930 g kg-1 de areia, 20 g kg-1 de silte e 50 g kg-1 de argila) e um Latossolo Vermelho (360 g kg-1 de areia, 100 g kg-1 de silte e 540 g kg-1 de argila) contendo 15 % de solo contaminado com Cd e Pb. Foram feitas cinco repetições testando-se o efeito da aplicação do subproduto in natura a 0; 0,25; 0,50; 1,00; e 2,00 %. Para comparação, utilizaram-se calcário, silicato e turfa a 0,25; 0,50; e 2,00 %, respectivamente, e cada um dos solos sem contaminação. Cultivou-se B. decumbens, fazendo coletas de lixiviado e determinando o pH e a CE. As concentrações de Cd e Pb foram avaliadas no lixiviado não-filtrado e filtrado (0,45 µm). Avaliaram-se a produção de matéria seca de raízes (MSR) e da parte aérea (MSPA) e as quantidades de Cd e Pb em ambas após digestão nitroperclórica. Os amenizantes contribuíram para aumentar o pH dos lixiviados do Neossolo Quartzarênico e do Latossolo Vermelho, tendo este último apresentado menores valores de condutividade eletrolítica quando comparado ao primeiro. Os teores de Cd nos lixiviados filtrados (fração solúvel) foram os mesmos dos lixiviados não-filtrados, enquanto os de Pb apresentaram diferenças. As produções de MSR e MSPA aumentaram com o aumento das taxas de aplicação do subproduto, e a quantidade de Cd na MSPA da B. decumbens foi maior que a de Pb.
Resumo:
The imperial cult area of Tarraco was built in the 1st century AD in the highest part of the city and presided over the seat of the Concilium Prouinciae Hispaniae Citerioris. It was a temenos with a similar layout to that of the Forum Pacis and architectural decoration imitating that of the Forum Augustum in Rome, where the use of marble was a fundamental part of the architectural and sculptural decorative programme. An extensive assemblage of marble was recovered during the excavations carried out under the Tarragona Cathedral Master Plan. It reflects the use of imperial quarries in the decorative programme and has been analyzed at the Unitat d’Estudis Arqueomètrics (ICAC) facilities. This assemblage reflects the wide panorama of marmora imported and used in the decoration of the temenos. Local varieties of marmora have been identified in Tarraco, plus a series of foreign marmora from quarries all over the Roman Empire (Greece, Turkey, Egypt and North Africa). All this shows the involvement of the imperial power in the monumental architecture of the capital of the prouincia Hispania Citerior.
Resumo:
En este artículo se presenta un método para determinar la forma del área de mercado de una planta industrial agraria asilada cuando el espacio isótropo para el transporte que rodea a la misma se halla atravesado por rutas en las cuales los costes unitarios de transporte son menores. Se plantea también qué hipótesis implícitas sobre los costes de transportes se encuentran en los esquemas publicados sobre la forma del área de mercado.
Resumo:
La Direcció General d’Indústria té com a principal finalitat el control de les instal•lacions i de diferents activitats de l’àmbit industrial; exerceix aquesta funció mitjançant la tramitació de documentacions tècniques i la inspecció. Com tota Administració Pública, es troba en un entorn molt dinàmic, on només les empreses més competitives poden subsistir i els ciutadans tenen noves necessitats molt diferents de les de fa un temps. Ambdós, empreses i ciutadans, exigeixen serveis de qualitat a un sector públic que no té altra alternativa que caminar en la mateixa direcció. L’objectiu d’aquest treball és planificar una sèrie d’accions estratègiques que permetran la millora dels serveis oferts a fi de complir amb les expectatives de la ciutadania. S’ha realitzat una anàlisi interna i de l’entorn de l’organització, el resultat de la qual ha estat la detecció d’una sèrie de punts de millora. A continuació s’ha definit una pla operatiu de qualitat, emmarcat dins del segon Pla Estratègic de Qualitat del Govern de les Illes Balears, amb tres propostes d’actuació: la separació de funcions, la tramitació ràpida d’expedients i el pla de formació. Les propostes esmentades constitueixen les bases d’una nova unitat orgànica (Oficina de Tramitació Ràpida), el model organitzatiu de la qual queda definit en els diferents apartats del treball. Igualment, s’hi descriu el procés de posada en funcionament dels distints procediments que es vagin adaptant al nou sistema i la planificació dels treballs a dur a terme, que seguiran el cicle de la qualitat de Deming, és a dir, planificar, fer, verificar i actuar.
Resumo:
Several flavors and fragrances (F&F) companies hold the economic leadership in the market, although not always have also the leadership in patent applications. The ranking of technological production in the fragrance area still remains with industries while scientific knowledge is equally shared between industries and academia. Contextualizing Brazil in this scene, despite all scientific expertise gained over the years, brazilian technological park is still at the beginning of the production of technologies applied directly to the F&F industries. The dependence on foreign technologies is remarkable as indicated by the great trade deficit in this sector.
Resumo:
Coal, oil, natural gas, and shale gas are biomass that is formed millions of years ago. These are non-renewable and depleting, even considering the recent discovery of new sources of oil in the presalt and new technologies for the exploitation of shale deposits. Currently, these raw materials are used as a source of energy production and are also important for the production of fine chemicals. Since these materials are finite and their (oil) price is increasing, it is clear that there will be a progressive increase in the chemical industry to use renewable raw materials as a source of energy, an inevitable necessity for humanity. The major challenge for the society in the twenty first century is to unite governments, universities, research centers, and corporations to jointly act in all areas of science with one goal of finding a solution to global problems, such as conversion of biomass into compounds for the fine chemical industry.Non-renewable raw materials are used in the preparation of fuels, chemical intermediates, and derivatives for the fine chemical industry. However, their stock in nature has a finite duration, and their price is high and will likely increase with their depletion. In this scenario, the alternative is to use renewable biomass as a replacement for petrochemicals in the production of fine chemicals. As the production of biomass-based carbohydrates is the most abundant in nature, it is judicious to develop technologies for the generation of chain products (fuels, chemical intermediates, and derivatives for the fine chemicals industry) using this raw material. This paper presents some aspects and opportunities in the area of carbohydrate chemistry toward the generation of compounds for the fine chemical industry.
Resumo:
The preparation of enantiomerically pure or enriched substances is of fundamental importance to pharmaceutical, food, agrochemical, and cosmetics industries and involves a growing market of hundreds of billions of dollars. However, most chemical processes used for their production are not environmentally friendly because in most cases, stoichiometric amounts of chiral inductors are used and substantial waste is produced. In this context, asymmetric catalysis has emerged as an efficient tool for the synthesis of enantiomerically enriched compounds using chiral catalysts. More specifically, considering the current scenario in the Brazilian chemical industry, especially that of pharmaceuticals, the immediate prospect for the use of synthetic routes developed in Brazil in an enantioselective fashion or even the discovery of new drugs is practically null. Currently, the industrial production of drugs in Brazil is primarily focused on the production of generic drugs and is basically supported by imports of intermediates from China and India. In order to change this panorama and move forward toward the gradual incorporation of genuinely Brazilian synthetic routes, strong incentive policies, especially those related to continuous funding, will be needed. These incentives could be a breakthrough once we establish several research groups working in the area of organic synthesis and on the development and application of chiral organocatalysts and ligands in asymmetric catalysis, thus contributing to boost the development of the Brazilian chemical industry. Considering these circumstances, Brazil can benefit from this opportunity because we have a wide biodiversity and a large pool of natural resources that can be used as starting materials for the production of new chiral catalysts and are creating competence in asymmetric catalysis and related areas. This may decisively contribute to the growth of chemistry in our country.