Evaluation of wood lignin as a substitute or extender of asphalt /

Mode of access: Internet.

Metakaolin as a cement extender

The effect of 10% and 20% replacement metakaolin on a number of aspects of hydration chemistry and service performance of ordinary Portland cement pastes has been investigated. The analysis of expressed pore solutions has revealed that metakaolin-blended specimen pastes possess enhanced chloride binding capacities and reduced pore solution pH values when compared with their unblended counterparts. The implications of the observed changes in pore solution chemistry with respect to chloride induced reinforcement corrosion and the reduction in expansion associated with the alkali aggregate reaction are discussed. Differential thermal analysis, mercury intrusion porosimetry, and nuclear magnetic resonance spectroscopy have been employed in the analysis of the solid phase. It is suggested that hydrated gehlenite (a product of pozzolanic reaction) is operative in the removal and solid state binding of chloride ions from the pore solution of metakaolin-blended pastes. Diffusion coefficients obtained in a non-steady state chloride ion diffusion investigation have indicated that cement pastes containing 10% and 20% replacement metakaolin exhibit superior resistance to the penetration of chloride ions in comparison with those of plain OPC of the same water:cement ratio. The chloride induced corrosion behaviour of cement paste samples, of water:cement ratio 0.4, containing 0% , 10%, and 20% replacement metakaolin, has been monitored using the linear polarization technique. No significant corrosion of embedded mild steel was observed over a 200 day period.

Small strain elastic behaviour of unsaturated soil investigated by bender/extender element testing

The aim of this project was to investigate very small strain elastic behaviour of soils under unsaturated conditions, using bender/extender element (BEE) testing. The behaviour of soils at very small strains has been widely studied under saturated conditions, whereas much less work has been performed on very small strain behaviour under unsaturated conditions. A suction-controlled double wall triaxial apparatus for unsaturated soil testing was modified to incorporate three pairs of BEEs transmitting both shear and compression waves with vertical and horizontal directions of wave transmission and wave polarisation. Various different techniques for measuring wave travel time were investigated in both the time domain and the frequency domain and it was concluded that, at least for the current experimental testing programme, peak-to-first-peak in the time domain was the most reliable technique for determining wave travel time. An experimental test programme was performed on samples of compacted speswhite kaolin clay. Two different forms of compaction were employed (i.e. isotropic and anisotropic). Compacted kaolin soil samples were subjected to constant suction loading and unloading stages at three different values of suction, covering both unsaturated conditions (s= 50kPa and s= 300kPa) and saturated conditions (s=0). Loading and unloading stages were performed at three different values of stress ratio (η=0, η=1 and η=-1 ). In some tests a wetting-drying cycle was performed before or within the loading stage, with the wetting-drying cycles including both wetting-induced swelling and wetting-induced collapse compression. BEE tests were performed at regular intervals throughout all test stages, to measure shear wave velocity Vs and compression wave velocity Vp and hence to determine values of shear modulus G and constrained modulus M. The experimental test programme was designed to investigate how very small strain shear modulus G and constrained modulus M varied with unsaturated state variables, including how anisotropy of these parameters developed either with stress state (stress-induced anisotropy) or with previous straining (strain-induced anisotropy). A new expression has been proposed for the very small strain shear modulus G of an isotropic soil under saturated and unsaturated conditions. This expression relates the variation of G to only mean Bishop’s stress p* and specific volume v, and it converges to a well-established expression for saturated soils as degree of saturation approaches 1. The proposed expression for G is able to predict the variation of G under saturated and unsaturated conditions at least as well as existing expressions from the literature and it is considerably simpler (employing fewer state variables and fewer soil constants). In addition, unlike existing expressions from the literature, the values of soil constants in the proposed new expression can be determined from a saturated test. It appeared that, in the current project at least, any strain-induced anisotropy of very small strain elastic behaviour was relatively modest, with the possible exception of loading in triaxial extension. It was therefore difficult to draw any firm conclusion about evolution of strain-induced anisotropy and whether it depended upon the same aspects of soil fabric as evolution of anisotropy of large strain plastic behaviour. Stress-induced anisotropy of very small strain elastic behaviour was apparent in the experimental test programme. An attempt was made to extend the proposed expression for G to include the effect of stress-induced anisotropy. Interpretation of the experimental results indicated that the value of shear modulus was affected by the values of all three principal Bishop’s stresses (in the direction of wave transmission, the direction of wave polarisation and the third mutually perpendicular direction). However, prediction of stress-induced anisotropy was only partially successful, and it was concluded that the effect of Lode angle was also significant.

LA ESCOLARIZACIÓN DE LA BIBLIOTECA PÚBLICA, CON UNA PROPUESTA PARA EXTENDER LA COBERTURA DE LAS BIBLIOTECAS PÚBLICAS OFICIALES DE COSTA RICA A LA COMUNIDAD

De acuerdo con los resultados obtenidos por medio del diagnóstico y a fin de reducir el fenómeno de la escolarización en las bibliotecas públicas estudiadas, se elaboró una propuesta que gira en torno a la fase de organización, distribución, promoción y evaluación de un nuevo modelo de gestión fundamentado en el desarrollo de un servicio de información a la comunidad (SIC). 

Higher order universal one-way hash functions from the subset sum assumption

Universal One-Way Hash Functions (UOWHFs) may be used in place of collision-resistant functions in many public-key cryptographic applications. At Asiacrypt 2004, Hong, Preneel and Lee introduced the stronger security notion of higher order UOWHFs to allow construction of long-input UOWHFs using the Merkle-Damgård domain extender. However, they did not provide any provably secure constructions for higher order UOWHFs. We show that the subset sum hash function is a kth order Universal One-Way Hash Function (hashing n bits to m < n bits) under the Subset Sum assumption for k = O(log m). Therefore we strengthen a previous result of Impagliazzo and Naor, who showed that the subset sum hash function is a UOWHF under the Subset Sum assumption. We believe our result is of theoretical interest; as far as we are aware, it is the first example of a natural and computationally efficient UOWHF which is also a provably secure higher order UOWHF under the same well-known cryptographic assumption, whereas this assumption does not seem sufficient to prove its collision-resistance. A consequence of our result is that one can apply the Merkle-Damgård extender to the subset sum compression function with ‘extension factor’ k+1, while losing (at most) about k bits of UOWHF security relative to the UOWHF security of the compression function. The method also leads to a saving of up to m log(k+1) bits in key length relative to the Shoup XOR-Mask domain extender applied to the subset sum compression function.

Dynamic properties of sand from dry to fully saturated states

By using bender and extender elements test, the velocities of the primary and shear waves, V(P) and V(s) respectively, were measured for a sandy material by gradually varying the degree of saturation, S(r), between the dry and fully saturated states. The effect on the results of varying the relative density and effective confining pressure was also studied. The measurements clearly reveal that for a certain optimum S(r), which is around 0.7-0.9% for the chosen sand, the value of the shear modulus G reaches a maximum value, whereas the corresponding Poisson's ratio nu attains a minimum value. The values of the shear modulus corresponding to S(r) approximate to 0% and S(r) = 100% tend towards the same value. For values of Skempton's B parameter greater than 0.99, the values of V(P) and nu rise very sharply to those of water. The predictions from Biot's theory with respect to the variation of V(P) with S(r) match well with the measured experimental data.

Transmission of elastic waves through a frictional boundary

Incident energy gets transmitted, reflected and absorbed across an interface in jointed rock mass leading to energy dissipation and alteration of waves. Wave velocities get attenuated during their propagation across joints and this behavior is studied using bender/extender element tests. The velocity attenuation and modulus reduction observed in experimental tests are modeled with three dimensional distinct element code and results are validated. Normal propagation of an incident shear wave through a jointed rock mass cause slip of the rock blocks if shear stress of wave exceeds the shear strength of the joint. As the properties of joint determine the transmission of energy across an interface, a parametric study is then conducted with the validated numerical model by varying the parameters that may determine the energy transmission across a joint using modified Miller's method. Results of the parametric study are analyzed and presented in the paper. (C) 2014 Elsevier Ltd. All rights reserved.

Early postnatal exposure to lithium in vitro induces changes in AMPAR mEPSCs and vesicular recycling at hippocampal glutamatergic synapses

Lithium is an effective mood stabilizer but its use is associated with many side effects. Electrophysiological recordings of miniature excitatory postsynaptic currents (mEPSCs) mediated by glutamate receptor AMPA-subtype (AMPARs) in hippocampal pyramidal neurons revealed that CLi (therapeutic concentration of 1 mM lithium, from days in vitro 4-10) decreased the mean amplitude and mean rectification index (RI) of AMPAR mEPSCs. Lowered mean RI indicate that contribution of Ca2+-permeable AMPARs in synaptic events is higher in CLi neurons (supported by experiments sensitive to Ca2+-permeable AMPAR modulation). Co-inhibiting PKA, GSK-3 beta and glutamate reuptake was necessary to bring about changes in AMPAR mEPSCs similar to that seen in CLi neurons. FM1-43 experiments revealed that recycling pool size was affected in CLi cultures. Results from minimum loading, chlorpromazine treatment and hyperosmotic treatment experiments indicate that endocytosis in CLi is affected while not much difference is seen in modes of exocytosis. CLi cultures did not show the high KCl associated presynaptic potentiation observed in control cultures. This study, by calling attention to long-term lithium-exposure-induced synaptic changes, might have implications in understanding the side effects such as CNS complications occurring in perinatally exposed babies and cognitive dulling seen in patients on lithium treatment.

La informalidad es masiva entre los trabajadores independientes por los altos costos y los bajos beneficios que implica la registración laboral

En números anteriores de Empleo y Desarrollo Social se han examinado las características y problemas de la informalidad laboral entre los asalariados, la cual alcanza al 43% de los trabajadores del sector privado. De acuerdo con la información disponible, la informalidad es aún mayor entre los trabajadores independientes, llegando al 70% en el Gran Buenos Aires. Según un relevamiento realizado por el Ministerio del Trabajo, esto se debería fundamentalmente al alto costo y la poca utilidad que se asocia a la registración laboral. Una realidad que refuerza la necesidad por rediseñar las políticas públicas para incentivar la formalidad y reducir la vulnerabilidad social de este segmento, por ejemplo a través de una reforma del sistema jubilatorio actual que permita extender la cobertura a la totalidad de las personas

An examination of fluctuations in the “concentration index” of purse seiners and baitboats in the fishery for tropical tunas in the Eastern Pacific, 1951-1961

ENGLISH: In the eastern Pacific Ocean nearly all of the commercial catches of yellowfin tuna (Thunnus albacares) and skipjack (Katsuwonus pelamis) are taken by two types of vessels, baitboats, which use pole and line in conjunction with live-bait, and purse-seiners. From its inception until very recently (1959), this fishery was dominated by baitboats. This method of fishing has been described by Godsil (1938) and Shimada and Schaefer (1956). From 1951 through 1958 baitboats caught between 66.4 and 90.8 per cent of the yellowfin and between 87.2 and 95.3 per cent of the skipjack landed by the California-based fleet. These vessels fished for tuna throughout the year and covered virtually all of the area from southern California to northern Chile. The purse-seine fishery for tunas developed out of the round-haul net fisheries for California sardines and other species. Scofield (1951) gives a detailed description of the development of gear and fishing methods. Prior to 1959 many of the seiners engaged in other fisheries during the fall and early winter months and consequently most of the fishing effort for tuna occurred in the period February-August. The vessels were quite small, averaging approximately 120 tons carrying capacity (Broadhead and Marshall, 1960), in comparison to the baitboats, of which the most numerous size-class was 201-300 tons. The seiners were naturally more restricted in range than the baitboats and most of their effort was restricted to the northern grounds. During the period 1959-61 most of the large baitboats were converted for purse-seining and the existing seiner fleet was modernized. These developments increased the range of the seiner fleet and resulted in a wider and more nearly even spatial and temporal distribution of effort. By the early part of 1961, the purse-seine fleet approximated the level of the preconversion baitboat fleet in amount of effort applied and area covered. The changes in the purse-seine fishery and the fishing methods employed in the modernized fleet are described by Orange and Broadhead (1959), Broadhead and Marshall (1960), McNeely (1961) and Broadhead (1962). The change in the relative importance of the two gears is illustrated by the decline in the proportion of the total logged tonnage landed by California-based baitboats, in comparison to the proportion landed by seiners. In 1959 baitboats landed 49.5 per cent of the yellowfin and 87.8 per cent of the skipjack. In 1960 these percentages were 22.9 and 74.7 respectively and in 1961 the decline continued to 12.6 per cent of the yellowfin and 30.0 per cent of the skipjack (Schaefer, 1962). In previous Bulletins of this Commission (Griffiths, 1960; Calkins, 1961) the baitboat catch and effort statistics were used to compute two indices of population density and an index of concentration of fishing effort and the fluctuations of these indices were analyzed in some detail. Due to the change in the relative importance of the two gears it is appropriate to extend this investigation to include the purse-seine data. The objectives of this paper are to compute two indices of population density and an index of concentration of fishing effort and to examine the fluctuations in these indices before and after the changes in the fishery. A further objective is to compare the purse-seine indices with those of the baitboats for the same time periods. SPANISH: En el Océano Pacífico Oriental casi todas las capturas comerciales del atún aleta amarilla (Thunnus albacares) y del barrilete (Katsuwonus pelamis) son efectuadas por dos tipos de barcos, los barcos de carnada que emplean la caña y el anzuelo en conjunto con la carnada viva, y los barcos rederos. Desde su comienzo hasta hace poco tiempo (1959), esta pesquería estaba dominada por los barcos de carnada. El método de pesca usado por estos barcos ha sido descrito por Godsil (1938) y por Shimada y Schaefer (1956). De 1951 a 1958, los barcos de carnada pescaron entre el 66.4 y el 90.8 por ciento del atún aleta amarilla y entre el 87.2 y el 95.3 por ciento del barrilete descargados por la flota que tiene su base en California. Estos barcos pescaron atún durante todo el año y cubrieron virtualmente toda el área de California meridional hasta la parte norte de Chile. La pesquería del atún con redes de cerco se originó en las pesquerías de las sardinas de California y otras especies, con redes que se remolcaban circularmente. Scofield (1951) dá una descripción detallada del desarrollo de los métodos y del equipo de pesca. Antes de 1959 muchos de los rederos se dedicaban a otras pesquerías durante los meses del otoño y a principios del invierno y consecuentemente, la mayor parte del esfuerzo depesca para la producción del atún ocurría en el período febrero-agosto. Las embarcaciones eran bastante pequeñas, con un promedio de aproximadamente 120 toneladas de capacidad para el transporte (Broadhead y Marshall, 1960) en comparación con los barcos de carnada, de los cuales la clase de tamaño más numerosa era de 201 a 300 toneladas. Los rederos estaban naturalmente más restringidos en su radio de acción que los barcos de carnada y la mayor parte de su esfuerzo se limitaba a las localidades del norte. Durante el período 1959-61, la mayoría de los grandes barcos de carnada fueron convertidos al sistema de pesca con redes de cerco, y se modernizó la flota existente de los rederos. Estos cambios aumentaron el alcance de la flota de los barcos rederos dando como resultado una distribución más amplia y casi más uniforme del esfuerzo espaciado y temporal. En la primera parte del año 1961, la flota de rederos se aproximó al nivel de la preconversión de la flota de clipers, en la cantidad de esfuerzo aplicado y al área comprendida. Los cambios en la pesquería con red y los métodos de pesca empleados en la flota modernizada, han sido descritos por Orange y Broadhead (1959), Broadl1ead y Marshall (1960), McNeely (1961) y Broadhead (1962). El cambio en la importancia relativa de los dos sistemas de pesca está ilustrado por la declinación en la proporción del tonelaje total registrado, como descargado por los barcos de carnada que tienen su base en California, comparado con la proporción desembarcada por los barcos rederos. En 1959 los clipers descargaron el 49.5 por ciento del atún aleta amarilla y el 87.8 por ciento del barrilete. En 1960 estos porcentajes fueron del 22.9 y 74.7 respectivamente, y en 1961 continuó la reducción hasta el 12.6 por ciento del atún aleta amarilla y el 30.0 por ciento del barrilete (Schaefer, 1962). En Boletines anteriores de la Comisión (Griffiths, 1960; Calkins, 1961) las estadísticas de la pesca y el esfuerzo de los clipers se utilizaron para computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y se analizaron algo detalladamente las fluctuaciones de estos índices. Debido al cambio en la importancia relativa de los dos sistemas de pesca, es conveniente extender esta investigación para incluir los datos correspondientes a los barcos rederos. Los objetivos del presente estudio son de computar dos índices de la densidad de población y un índice de la concentración del esfuerzo de pesca, y examinar las fluctuaciones en estos índices, antes y después de los cambios en la pesquería. Otro objetivo es de comparar los índices de los barcos rederos, con aquellos de los clipers en los mismos períodos de tiempo.

Evaluación del uso de las tecnologías de la información y comunicación (tic) en el ámbito universitario

Este artículo dice que gracias a las TIC se abre un amplio ámbito de actuación fuera del sistema educativo no tradicional, el cual tendremos que diseñar y desarrollar desde los parámetros didácticos y formativos. En éstos nuevos espacios tecnológicos, los estudiantes y los profesores tienen que revisar sus roles y funciones para desarrollar con efectividad sus actividades y mutuamente reforzar los beneficios que se generen. Para poder tener una visión completa del impacto de las TIC en el ámbito global universitario es necesario extender éste estudio a estudiantes de diferentes años académicos, así como al conjunto de los tres Campus que constituyen la Universidad de País Vasco(UPV/EHU).

Preliminary study on the natural extenders for artificial breeding of African catfish Clarias gariepinus (Burchell, 1822)

The objective of the present study was to determine the most suitable extender and their respective dilution ratios for African catfish sperm for artificial induced breeding and cryopreservation purposes. Three natural extenders were tested i.e. coconut water, sugarcane water and soybean solutions, at three different levels of sperm to extender dilutions of 1:20, 1:30 and 1:40. While Ringer solution was used as a control Diluted sperm were fertilized with ready isolated eggs to assess the fertility and hatching rate at 0, 6 and 12 hour intervals. The results showed that the eggs hatched approximately 19 to 27 hours after fertilization. In general, the fertilization and hatching rates decreased with increasing dilution ratio. With respect to natural extenders, the coconut water showed the highest fertility and hatching rates at 1:20 dilution ratio. Therefore, coconut water at 1:20 dilution ratio was the optimal condition for African catfish spermatozoa among the natural extenders investigated.

Avaliação das propriedades de barreira a gases de membranas obtidas a partir de dispersões aquosas à base de poliuretanos e argila

Materiais nanoestruturados têm recebido destaque na comunidade científica, destacando-se, dentre eles, os nanocompósitos à base de polímeros e argila. Quando esses materiais são obtidos no estado líquido, ressalta-se também o uso de água em substituição a solventes orgânicos, devido a questões ambientais. Neste trabalho foram sintetizadas dispersões aquosas à base de poliuretanos (WPUs) e argila hidrofílica do tipo montimorilonita (MMT) de natureza sódica, com o objetivo de avaliar as propriedades de barreira a gases conferidas pela presença de argila e pela variação nas proporções entre os segmentos flexíveis poli(glicol propilênico) (PPG) e o copolímero em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG). Os monômeros empregados na síntese foram: poli(glicol propilênico) (PPG); copolímero em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG), com teor de 7% de EG; ácido dimetilolpropiônico (DMPA), diisocianato de isoforona (IPDI) e etilenodiamina (EDA), como extensor de cadeia. Foram sintetizadas dispersões aquosas com e sem a presença de argila, fixando-se a razão entre o número de equivalentes-grama de grupos diisocianato e hidroxila (razão NCO/OH) em 1,5. Nas formulações foi variado também o teor de argila em relação à massa de prepolímero em 0,5% e 1%. Foi adicionada uma etapa de agitação adicional com dispersor Turrax em algumas formulações. A argila foi previamente deslaminada em água deionizada e incorporada à formulação na etapa da dispersão do prepolímero. As dispersões foram avaliadas, quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade aparente. Os filmes vazados a partir das dispersões foram caracterizados por espectrometria na região do infravermelho (FTIR) e permeabilidade ao CO2. A resistência térmica dos filmes foi determinada por termogravimetria (TG). Foram observadas modificações nas propriedades dos filmes obtidos com a inserção da argila e com a variação no teor de segmentos à base de poli(glicol etilênico). A inserção da argila promoveu uma melhoria na resistência térmica das membranas bem como uma redução na permeabilidade das mesmas. Foi observado um aumento na permeabilidade das membranas obtidas a partir das formulações com maior percentual de copolímero (EG-b-PG), com e sem argila.

Avaliação da influência de diferentes óleos extensores com baixo teor de policíclicos aromáticos nas propriedades da borracha à base butadieno e estireno (SBR)

O óleo extensor normalmente empregado em copolímeros à base de butadieno e estireno ( borracha SBR) da série 1712 é o extrato aromático (DAE). Nesta Dissertação, esse óleo foi substituído por óleos com baixos teores de policíclicos aromáticos em formulações de SBR. Esta substituição se deu em atendimento a Regulamentação REACH (EC No1907/2006 do Parlamento Europeu e do Conselho de 18 de Dezembro de 2006, Anexo XVII) que determina que a soma de hidrocarbonetos policíclicos aromáticos individuais (PAHs) deve ser abaixo de 10 mg/kg e o teor de benzo(a)pireno (BaP) não deve exceder 1 mg/kg. Os óleos empregados foram o extrato aromático residual tratado (TRAE) e dois óleos naftênicos de fornecedores diferentes (HN1 e HN2). As composições de SBR estendidas em DAE, TRAE, HN1 e HN2 tiveram suas propriedades térmicas avaliadas por análise termogravimétrica (TG) e calorimetria diferencial de varredura (DSC). As propriedades físicas foram determinadas por ensaios de tração, dureza, resistência à abrasão e resiliência. Foram ainda avaliadas as propriedades reométricas e reológicas, por viscosidade e relaxação Mooney, respectivamente. Ao final os resultados demonstraram que é possível a substituição do óleo extensor por quaisquer dos óleos testados sem prejuízos nas propriedades estudadas

Estudo da influência do teor de segmentos hidrofílicos na síntese de poliuretanos dispersos em água

Considerações ambientais têm aumentado a pesquisa e o desenvolvimento de sistemas poliméricos aquosos para diversos tipos de aplicações, principalmente como revestimentos. Nesta dissertação, foram sintetizadas formulações não-poluentes à base de poliuretanos dispersos em água (PUDs), com 40% de teor de sólidos, na ausência de solventes orgânicos. Os monômeros empregados foram copolímeros em bloco à base de poli(glicol etilênico) e poli(glicol propilênico) (EG-b-PG), com teor de 25% de segmento hidrofílico EG, poli (glicol propilênico) (PPG), ácido dimetilolpropiônico (DMPA), diisocianato de isoforona (IPDI) e hidrazina (HYD), como extensor de cadeia. Foram variadas as razões entre o número de equivalente-grama de grupamentos isocianato e hidroxila (NCO/OH) e a proporção em equivalente-grama de PPG e dos copolímeros em bloco (EG-b-PG). Foi observado que a incorporação de altas quantidades de copolímero dificultou a síntese dos poliuretanos dispersos em água, levando à formação de géis. O tamanho médio de partícula e a viscosidade das dispersões foram determinados. Os filmes vazados a partir dessas dispersões foram avaliados quanto à capacidade de absorção de água, resistência mecânica, termogravimetria (TG), e caracterizados por espectroscopia na região do infravermelho (FTIR). As dispersões poliuretânicas produzidas se mostraram satisfatórias quando aplicadas como revestimento para madeira, metais e vidro