Struktur-Eigenschafts-Beziehungen flüssigkristalliner hyperverzweigter Polymere

Auf dem Gebiet der polymeren Flüssigkristallforschung sind definierte Systeme unerlässlich. Im Gegensatz zu Dendrimeren und linearen Polymeren, standen hyperverzweigte Materialien mit enger Molekulargewichtsverteilung lange Zeit nicht zur Verfügung. Hyperverzweigte Polymere besitzen die gleichen Vorteile wie Dendrimere; hohe Endgruppendichte und niedrige Viskositäten, jedoch sind hyperverzweigte Polymere einfacher und in größeren Mengen zugänglich, was sie für industrielle Anwendungen interessant macht. Mit der Entwicklung der Synthese von hyperverzweigten Polymeren enger Molekulargewichtsverteilung durch Frey et al. wurde der Grundstein für hyperverzweigte LC-Materialien gelegt. Im Rahmen diese Dissertation wurden Synthesewege zur Darstellung hyperverzweigter LC-Materialien entwickelt und ihr Phasenverhalten sowie die Überstrukturbildung in Abhängigkeit verschiedener struktureller Parameter untersucht. Die erarbeiteten Struktur-Eigenschafts-Beziehungen ermöglichen die Synthese flüssigkristalliner hyperverzweigter Polymere mit spezifischen Eigenschaften für Anwendungen in der Display-Technologie oder auf dem Gebiet selbstorganisierender Systeme.

Dendritische Copolymere auf der Basis von Milchsäure

In der vorliegenden Arbeit wurden verzweigte Copolymerstrukturen auf der Basis von Milchsäure synthetisiert. Über die Kombination der AB-Ringöffnungspolymerisation (ROP) des Dilactids mit der AB2-Polykondensation symmetrischer Bishydroxy-Carbonsäuren waren langketten- und hyperverzweigte Polylactidcopolyester zugänglich, wobei der Verzweigungsgrad über das Verhältnis der Monomere gezielt variiert werden konnte. Weiterhin wurde ausgehend von hyperverzweigtem Polyglycerin in einer „core-first“ Strategie erstmals PLA-Multiarmsterne aufgebaut. Es zeigte sich, daß die Hydrophobisierung der hydrophilen Polyglycerinstruktur durch Anbindung der Lactidarme zur Ausbildung amphiphiler Kern-Schale-Strukturen führt.

Silicon-containing block copolymers with well-defined, branched architectures

In the past decade, block copolymers (BCPs) have attracted increasing scientific and technological interest because of their inherent capability to spontaneously self-assemble into ordered arrays of nanostructures. The importance of nanostructures in a number of applications has fostered the need for well-defined, complex macromolecular architectures. In this thesis, the influence of macromolecular architecture on the bulk morphologies of novel linear-hyperbranched and linear brush-like diblock copolymer structure is investigated. An innovative, generally applicable strategy for the preparation of these defined diblock copolymers, consisting of linear polystyrene and branched polycarbosilane blocks, is demonstrated. Furthermore, complete characterization and solid-state morphological studies are provided. Finally, the concept is extended to linear-hyperbrached and linear brush-like polyalkoxysilanes. A shift of the classical phase boundaries to higher PS weight fractions as well as the appearance of new morphologies confirms the dramatic effect that polymer topology has on the morphology of BCPs.

Mesenchymal stromal cell: new applications for regenerative medicine

In the last decades mesenchymal stromal cells (MSC), intriguing for their multilineage plasticity and their proliferation activity in vitro, have been intensively studied for innovative therapeutic applications. In the first project, a new method to expand in vitro adipose derived-MSC (ASC) while maintaining their progenitor properties have been investigated. ASC are cultured in the same flask for 28 days in order to allow cell-extracellular matrix and cell-cell interactions and to mimic in vivo niche. ASC cultured with this method (Unpass cells) were compared with ASC cultured under classic condition (Pass cells). Unpass and Pass cells were characterized in terms of clonogenicity, proliferation, stemness gene expression, differentiation in vitro and in vivo and results obtained showed that Unpass cells preserve their stemness and phenotypic properties suggesting a fundamental role of the niche in the maintenance of ASC progenitor features. Our data suggests alternative culture conditions for the expansion of ASC ex vivo which could increase the performance of ASC in regenerative applications. In vivo MSC tracking is essential in order to assess their homing and migration. Super-paramagnetic iron oxide nanoparticles (SPION) have been used to track MSC in vivo due to their biocompatibility and traceability by MRI. In the second project a new generation of magnetic nanoparticles (MNP) used to label MSC were tested. These MNP have been functionalized with hyperbranched poly(epsilon-lysine)dendrons (G3CB) in order to interact with membrane glycocalix of the cells avoiding their internalization and preventing any cytotoxic effects. In literature it is reported that labeling of MSC with SPION takes long time of incubation. In our experiments after 15min of incubation with G3CB-MNP more then 80% of MSC were labeled. The data obtained from cytotoxic, proliferation and differentiation assay showed that labeling does not affect MSC properties suggesting a potential application of G3CB nano-particles in regenerative medicine.

Electrostatic supramolecular assembly of charged dendritic polymers and their biological application

The aim of this study was the development of functional multilayer films through electrostatic layer by layer (LbL) assembly of dendritic macromolecules, the investigation of the fundamental properties of these multilalyered films and the study of their biological applications. rnThe synthesis of the anionic hyperbranched polyglycerols (hbPG) and the preparation of multilayers made of hbPG/phosphorus dendrimer as well as the influences of deposition conditions on multilayers were reported. The thicknesses of multilayer films increase with a decrease of molecular weight of anionic hbPGs. The multilayer films fabricated by low molecular weight hbPGs grow less regularly due to the less charged carboxylic acid groups providing the relative weaker electrostatic forces for the deposition. The thicknesses of multilayer films are reduced with increasing pH values and decreasing the concentration of NaCl. The observed changes of multilayer thickness and surface morphology could be interpreted with the aid of theories regarding the charge density and conformation of the anionic hbPG chains in solution. rnBesides the study of fundamental properties of hbPG/phosphorus multilayer films, antifouling thin films derived from hbPG layers were developed. The antifouling properties of hbPG layers were found to correlate with factors of the molecular weight of anionic hbPG and the film thickness. It was demonstrated that anionic hbPG single layer with highest molecular weight can reduce non specific protein adsorption more efficiently than single layer with lower molecular weight and all the hbPG bilayers possessed excellent property of antifouling. rnPhosphorus dendrimer multilayers were successfully prepared as the platforms to detect DNA immobilization and hybridization. The effect of NaCl concentration on the multilayer film thickness was evaluated to obtain the optimized film thickness. Making use of the multilayer deposited at the optimized condition as a substrate, a high loading of DNA probes was achieved through covalent coupling of probe DNA with the as-formed multilayer films. The hybridization of target DNA with immobilized probe DNA was then carried out and studied by SPFS. The limit of detection upon hybridization was estimated on various dendrimer multilayer platforms. The minimum detection concentration for DNA hybridization is in the same order of magnitude compared with other neutral phosphorus dendrimer systems. Furthermore, the LbL deposition of phosphorus dendrimer multilayers provided a mild and simple way to prepare platforms as DNA microarrays. rnBased on the phosphorus dendrimer multilayer systems, dendritic star polymers were employed which have more reactive groups than that phosphorus dendrimers. The as-assembled dendritic star polymer multilayer films exhibited such distinct morphology characteristics that they underwent extensive structural reorganization upon post-treatment under different pH conditions. Kinetic binding of probe DNA molecules on the outermost negatively charged dendritic surface was studied by SPR as well. The binding capacities of probe DNA on the multilayer surfaces fabricated from the first-generation and the second-generation of dendritic star polymers were compared. The improved binding capacity was achieved from the second-generation of dendritic star polymer multilayer films due to their more reactive groups. DNA hybridization reaction on dendritic multilayer films was investigated by SPFS. The similar hybridization behaviors were found on both multilayer surfaces. Meanwhile, the hybridization kinetic affinities were compared with that of phosphorus dendrimer multilayer surfaces and showed improved detection sensitivity than phosphorus dendrimer multilayer films.rn

From amphiphilic block copolymers to ferrocenyl-functionalized polymers for biosensoric applications

The present thesis can be divided in three main parts. In all parts new polymer architecturesrnwere synthesized and characterized concerning their special features.rnThe first part will emphasize the advantage of a polystyrene-block-(hyperbranchedrnpolyglycerol) copolymer in comparison to an analogue polystyrene-block-(linear polyglycerol)rncopolymer. Therefore a synthethic route to prepare linear block copolymersrnhas been developed. Two strategies were examined. One strategy was based on thernclassic, sequential anionic polymerization; the second strategy was based on arn“Click-Chemistry” coupling reaction. In a following step glycidol was hypergraftedrnfrom these block copolymers by applying a hypergrafting reaction with glycidol. Thernbehavior of the amphiphilic block copolymers synthesized was studied in differentrnsolvents. Furthermore the polarity of the solvent was changed to form the correspondingrninverse micelles. DLS, SLS, SEC-MALLS-VISCO, AFM and Cyro TEMrnmeasurements were performed to obtain a visual image from the appearance of thernaggregates. It was found that a linear-hyperbranched architecture is necessary, ifrnwell defined, monodisperse aggregates are required, e.g. for the preparation of orderedrnnanoarrays. Linear-linear block copolymers formed only polydisperse aggregates.rnAdditionally it was found that size distribution could be improved dramaticallyrnby passing the aggregates through a SEC column with large pores. The SEC columnsrnacted like a template in which the aggregates adopt a more stable conformation.rnIn the second part anionic polymerization was employed to synthesize silaneendfunctionalizedrnmacromonomers with different molecular weights based on polybutadienernand polyisoprene. These were polymerized by a hydrosilylation reaction inrnbulk to obtain branched polymers, using Karstedt’s catalyst. Surprisingly the additionrnof monofunctional silanes during the polymerization had only a minimal effect concerningrnthe degree of polymerization. It was possible to introduce silanes without increasingrnthe overall number of reaction steps by a very convenient “pseudo-copolymerization”rnmethod. All branched polymers were analyzed by SEC, SEC-MALLS,rnSEC-viscometry, 1H-NMR-spectroscopy and DSC concerning their branching ratio.rnThe branching parameters for the branched polymers exhibited similar characteristicsrnas hyperbranched polymers based on AB2 monomers. Detailed kinetic study showedrnthat the polymerization occurred very rapidly in comparison to the hydrosilylation polymerizationrnof classical AB2 type carbosilanes monomers.rnThe last part will deal with ferrocenyl-functionalized polymers. On the one hand,rnferrocenyl-functionalized polyglycerols (PG) were studied. Esterification of PGs withrndifferent molecular weight using ferrocenemonocarboxylic acid gave the ferrocenylrnfuntionalized polymers in high yields. On the other hand three different block copolymersrnwere prepared with different ratios of styrene to butadiene units (10:1, 4:1, 2:1).rnThe double bonds of the 1,2-PB block were hydrosilylated using silanes bearing onern(HSiMe2Fc) or two (HSiMeFc2) ferrocene units. High degrees of functionalizationrnwere obtained (up to 83 %). In this manner, six different ferrocenyl-rich block copolymersrnwith different fractions of ferrocene were prepared and analyzed, employingrnNMR-spectroscopy, SEC, SEC/MALLS/viscometry, DLS and cyclic voltammetry. Thernredox properties of the studied polymers varied primarily with the nature of the silanernunit attached. Additionally, the redox properties in solution of the studied polymersrnwere influenced by the block length ratio of the block copolymers. Unexpectedly, withrnincreasing block length of the ferrocenyl block the fraction of active ferrocenes decreased.rnNevertheless, in case of thin monolayer films this behaviour was not observed.rnAll polymers (PG and PS-b-PB based) exhibited good electrochemical propertiesrnin a wide range of solvents, which rendered them very interesting for biosensoricrnapplications.

Functional silicones and silicone-containing block copolymers

Polysiloxanes can be synthesized and subsequently modified (i) by the attachment of small molecules that change the properties of the silicone in such a way that it becomes more hydrophilic, but under the premise that this does not go together with a loss of the silicone-specific features. This can be done by adding hydrophilic sidechains to a polysiloxane. Polyethers like poly(ethylene glycol) or hyperbranched polyether-polyols are suitable in this regard. In order to assure that the silicone properties retain, these side groups can be attached to only one part of the polysiloxane backbone, which results in a block copolymer that consists of a common polysiloxane and a second block of the modified structure. (ii) Polysiloxanes can be equipped with functional groups that are capable of initializing polymerization of a different monomer (macroinitiator approach). For example, hydroxyl groups are used to initiate the ring opening polymerization of cyclic esters, or ATRP macroinitiators can be synthesized to add a second block via controlled radical polymerization. Stimuli responsive polymers like poly(oligoethylene glycol methacrylate) (POEGMA) can be added via this route to create “smart” siloxane-containing block copolymers that respond to certain stimuli. rnAn important premise for all synthetic routes is to achieve the targeted structure in a process as simple as possible, because facile availability of the material is crucial with regard to industrial applicability of the invented products. rnConcerning characterization of the synthesized macromolecules, emphasize is put on their (temperature dependent) aggregation behavior, which can be investigated by several microscopic and scattering methods, their behavior at the interface between silicone oils and water and their thermal properties.rnrn

Functional poly(phosphoester)s : the olefin metathesis route

Diese Dissertation zeigt zum ersten Mal den Ansatz gesättigte und ungesättigte Poly(Phosphorester) herzustellen, deren Polymergerüst und Seitenketten durch präzises Anbring-en von funktionellen und/oder solubilisierenden Gruppen modifiziert werden können. Durch Kombinieren der Vorteile der Olefinmetathese mit der Vielseitigkeit der Phos-phorchemie, eröffnet dieser variable Ansatz den Zugang zu einer neuen Klasse ungesättigter Poly-phosphate. Die zu Grunde liegende Idee ist das maßgeschneiderte Anpassen der Architektur und der Mikrostruktur dieser Polymere. Lineare, verzweigte, markierte und telechele Poly(Phosphorester) können in großem Maßstab mit hohen Funktionalisierungsgrad hergestellt werden.rnEiner der größten Vorteile dieses Ansatzes ist es, das Polymerrückrat modifizieren zu können, was weder bei der Ringöffnungs- noch bei klassischen Polymerisationen möglich ist, bei denen nur eine limitierte Anzahl an Monomeren existieren.rnDie Eigenschaften des Phosphors werden in neue Polymerarchitekturen übertragen, was von Nutzen für flammenhemmenden Materialen und Anwendung bei Gewebetherapeutika ist. Diese Doktorarbeit führt auch einzigartige Poly(Phosphorester) ein, welche im Feld der Op-toelektronik als Sauerstofffänger eingesetzten werden können. Die beschriebenen Synthese-vorschriften können einfach in größeren Maßstab durchgeführt werden und sind vielversprechend für industrielle Anwendungen, da ungesättigte Polyester einen sehr wichtigen Markt repräsentieren.

From anionic polymerization in continuous flow to macromolecular architectures and stimuli-responsive surfaces

The thesis can be divided in four parts and summarized as follows:(i) The investigation and development of a continuous flow synthesis procedure affording end-functional polymers by anionic polymerization and subsequent termination in one reaction step and on a multigram scale was carried out. Furthermore, the implementation of not only a single hydroxyl but multiple orthogonal functionalities at the chain terminus was achieved by utilizing individually designed, functional epoxide-based end-capping reagents.(ii) In an additional step, the respective polymers were used as macroinitiators to prepare in-chain functionalized block copolymers and star polymers bearing intriguing novel structural and material properties. Thus, the second part of this thesis presents the utilization of end-functional polymers as precursors for the synthesis of amphiphilic complex and in some cases unprecedented macromolecular architectures, such as miktoarm star polymers based on poly(vinyl pyridine), poly(vinyl ferrocene) and PEO.(iii) Based on these structures, the third part of this thesis represents a detailed investigation of the preparation of stimuli-responsive ultrathin polymer films, using amphiphilic junction point-reactive block copolymers. The single functionality at the block interface can be employed as anchor group for the covalent attachment on surfaces. Furthermore, the change of surface properties was studied by applying different external stimuli.(iv) An additional topic related to the oxyanionic polymerizations carried out in the context of this thesis was the investigation of viscoelastic properties of different hyperbranched polyethers, inspired by the recent and intense research activities in the field of biomedical applications of multi-functional hyperbranched materials.

18 F-Click-Radiomarkierung polymerer Trägersysteme zur ex vivo- und in vivo-Evaluierung

Die Positronen-Emissions-Tomographie (PET) ist ein leistungsstarkes, nicht-invasives, bildgebendes Verfahren in der Nuklearmedizin und hat darüber hinaus zunehmende Bedeutung in der Arzneistoffentwicklung. Zur Verbesserung des therapeutischen Index von niedermolekularen Pharmaka werden vermehrt Wirkstofftransportsysteme eingesetzt. Eine Klasse dieser Wirkstofftransportsysteme sind Liposomen. Die Weiterentwicklung der klassischen Liposomen sind sogenannte „Stealth“-Liposomen, die eine Polyethylenglykol (PEG)-Korona zur Herabsetzung der Erkennung und Ausscheidung tragen. Zur (Weiter-)Entwicklung und deren in vivo-Evaluierung bietet die PET die Möglichkeit, die Auswirkungen von strukturellen Anpassungen auf die pharmakokinetischen Eigenschaften solcher Transportsysteme zu untersuchen. Zur Evaluierung neuartiger, cholesterolverankerter, linear-hyperverzweigter Polyglycerole (Ch-PEG-hbPG) als sterisch stabilisierende Polymere in Liposomen wurden diese im Rahmen dieser Arbeit mit der prosthetischen Gruppe 18F-TEG-N3 über kupferkatalysierte Alkin-Azid Cycloaddition (CuAAC) in sehr hohen Ausbeuten radiomarkiert. Zum systematischen Vergleich des in vivo-Verhaltens wurde ebenfalls ein cholesterolbasiertes lineares PEG (Ch-PEG) mit CuAAC nahezu quantitativ radiomarkiert. Als drittes Element wurde die Direktmarkierung von Cholesterol mit [18F]F- entwickelt. Diese drei Verbindungen wurden zuerst separat als Einzelkomponenten und anschließend, in Liposomen formuliert, in Tierstudien an Mäusen hinsichtlich ihrer initialen Pharmakokinetik und Biodistribution untersucht. Dabei zeigte sich ein ähnliches Verhalten der neuartigen Ch-PEG-hbPG-Derivate zu den bekannten Ch-PEG, mit dem Vorteil der Multifunktionalität an den hyperverzweigten Strukturen. Die liposomalen Strukturen mit der neuartigen sterischen Stabilisierung wiesen eine erhöhte Blutzirkulationszeit und vorteilhafte Blut-zu-Leber- und Blut-zu-Lunge-Verhältnisse im Vergleich zu den linear stabilisierten Analoga auf.rnEine weitere Klasse von Wirkstofftransportsystemen sind polymere Trägersysteme wie pHPMA. Alkinfunktionalisierte Polymere konnten in zwei verschiedenen Größen (~12 und 60 kDa) mittels CuAAC in sehr hohen Ausbeuten mit der prosthetischen Gruppe 18F-TEG-N3 radiomarkiert werden. Bicyclononinderivate der gleichen Größen konnten ohne Kupferkatalyse über ringspannungsvermittelte Alkin-Azid-Cycloaddition (SPAAC) mikrowellengestützt markiert werden und stehen somit zur in vivo-Untersuchung hinsichtlich des Einflusses der Markierungsart zur Verfügung.

Nanopartículas catiônicas de poli (ácido lático) para liberação modificada de peptídios da peçonha do escorpião Tityus serrulatus

Reported accidents involving the poisoning scorpions are still frequent in Brazil, mainly caused by Tityus serrulatus, known as yellow scorpion. Although antivenom sera are produced routinely by various government laboratories, the effectiveness of its use depends on how quickly treatment is initiated and efficiency in the production of antibodies by the immunized animals. In this study, the development of cationic polymeric nanoparticles of poly(lactic acid) aimed to create a modified delivery system for peptides and proteins of T. serrulatus venom, able to enhance the production of serum antibodies against the scorpion toxins. The cationic nanoparticles were obtained by a low energy nanoprecipitation, after study of the parameters’ variations effects over the physicochemical properties of the particles. The surface functionalization of the nanoparticles with the hyperbranched polyethyleneimine was proved by zeta potential analysis and enabled the adsorption by electrostatic interaction of different types of proteins. The protein loading efficiency of 40-80 % to bovine serum albumin (BSA) and 100 % to scorpion venom peptides evaluated by spectrophotometry and polyacrylamide gel electrophoresis confirmed the success of the selected parameters established for obtainment of nanoparticles, produced with size between 100 to 250 nm. The atomic force microscopy analysis and in vitro release showed that the spherical nanoparticles provided a sustained release profile of proteins by diffusion mechanism, demonstrating the potential for application of the nanoparticles in vivo.

Nanopartículas catiônicas de poli (ácido lático) para liberação modificada de peptídios da peçonha do escorpião Tityus serrulatus

Reported accidents involving the poisoning scorpions are still frequent in Brazil, mainly caused by Tityus serrulatus, known as yellow scorpion. Although antivenom sera are produced routinely by various government laboratories, the effectiveness of its use depends on how quickly treatment is initiated and efficiency in the production of antibodies by the immunized animals. In this study, the development of cationic polymeric nanoparticles of poly(lactic acid) aimed to create a modified delivery system for peptides and proteins of T. serrulatus venom, able to enhance the production of serum antibodies against the scorpion toxins. The cationic nanoparticles were obtained by a low energy nanoprecipitation, after study of the parameters’ variations effects over the physicochemical properties of the particles. The surface functionalization of the nanoparticles with the hyperbranched polyethyleneimine was proved by zeta potential analysis and enabled the adsorption by electrostatic interaction of different types of proteins. The protein loading efficiency of 40-80 % to bovine serum albumin (BSA) and 100 % to scorpion venom peptides evaluated by spectrophotometry and polyacrylamide gel electrophoresis confirmed the success of the selected parameters established for obtainment of nanoparticles, produced with size between 100 to 250 nm. The atomic force microscopy analysis and in vitro release showed that the spherical nanoparticles provided a sustained release profile of proteins by diffusion mechanism, demonstrating the potential for application of the nanoparticles in vivo.