Social Investment and State Capacity. CEPS Working Document No. 419/February 2016

This paper looks at the difference between the levels and nature of social policy expenditure in northern and northwest European countries and the countries of southern, central, and eastern Europe, and examines the relationship between social investment and state capacity in these country groupings. The authors show that southern and eastern countries have a much greater preference for ‘compensating’ rather than ‘capacitating’ social policy spending. Furthermore, the state capacity in these countries is lower, which generates less state revenue. Based on these observations they conclude that low state capacity and low state revenue go hand in hand with the preference for capacitating social policies, as these policies involve less delegation and discretion than social investment policies. This paper shows that high state capacity is probably a necessary precondition for effective social investment policies, although some limited alternative paths do exist.

Phosphorus nutrition of Caustis blakei grown with two phosphorus sources of different solubility in two soils of differing phosphorus adsorption capacity

A barrier to the domestication of the phosphorus (P) sensitive Australian species Caustis blakei (Cyperaceae) is the standard production systems used commercially which invariably result in problems associated either with P deficiency or P toxicity. This paper reports on the growth responses of Caustis blakei cv. M63 to applications of fertiliser P as either monocalcium phosphate (MCP) or granulated Guano Gold (R) rock phosphate (RP) in two soils with different capacities to adsorb P. The Caustis M63 plants grown in the two soils did not show P toxicity symptoms when fertilised with RP, but shoot dry weight was 30-60% lower than the control in both soils at the highest rate of MCP-P application (156 kg ha(-1), 184 g m(-3)) and this was associated with visible symptoms of drying of the tips of the ultimate branchlets, in the Mt Cotton soil only. The greatest shoot and root dry weights were achieved by plants grown in the higher P adsorbing Palmwoods soil fertilised with RP at P rates of 30-184 g m(-3). Caustis plants grown in the Palmwoods soil had 2.3 times greater root dry weights than plants grown in the Mt Cotton soil irrespective of the P fertiliser type used. Caustis plants growing in Mt Cotton soil which did not receive P showed significantly lower shoot and root dry weight when compared to plants in the Palmwoods soil, probably due to the low initial bicarbonate-extractable P and the high buffering capacity of the Mt Cotton soil. The P concentration in shoots of Caustis fertilised with MCP at 184 g m(-3) was higher when grown in Mt Cotton soil (0.22%) than in the Palmwoods soil (0.15%). The P concentration was lower in the terminal ultimate branchlets (TUB); 0.15% for the Mt Cotton soil and 0.10% for the Palmwoods soil, suggesting that shoots would provide a more useful indicator of P toxicity than the TUB. It is interesting to speculate as to why plants in the Palmwoods soil showed greater root growth and fewer symptoms of P toxicity. This could be because the Palmwoods soil had the greater P adsorption capacity. These results indicate in ground production of Caustis cut foliage will require careful management of P nutrition and understanding of the complex soil/plant interactions associated with the acquisition of P. (c) 2006 Elsevier B.V. All rights reserved.

The compressive creep and load relaxation properties of a series of high aluminium zinc-based alloys

A new family of commercial zinc alloys designated as ZA8, ZA12, and ZA27 and high damping capacity alloys including Cosmal and Supercosmal and aluminium alloy LM25 were investigated for compressive creep and load relaxation behaviour under a series of temperatures and stresses. A compressive creep machine was designed to test the sand cast hollow cylindrical test specimens of these alloys. For each compressive creep experiment the variation of creep strain was presented in the form of graphs plotted as percentage of creep strain () versus time in seconds (s). In all cases, the curves showed the same general form of the creep curve, i.e. a primary creep stage, followed by a linear steady-state region (secondary creep). In general, it was observed that alloy ZA8 had the least primary creep among the commercial zinc-based alloys and ZA27 the greatest. The extent of primary creep increased with aluminium content to that of ZA27 then declined to Supercosmal. The overall creep strength of ZA27 was generally less than ZA8 and ZA12 but it showed better creep strength than ZA8 and ZA12 at high temperature and high stress. In high damping capacity alloys, Supercosmal had less primary creep and longer secondary creep regions and also had the lowest minimum creep rate among all the tested alloys. LM25 exhibited almost no creep at maximum temperature and stress used in this research work. Total creep elongation was shown to be well correlated using an empirical equation. Stress exponent and activation energies were calculated and found to be consistent with the creep mechanism of dislocation climb. The primary α and β phases in the as-cast structures decomposed to lamellar phases on cooling, with some particulates at dendrite edges and grain boundaries. Further breakdown into particulate bodies occurred during creep testing, and zinc bands developed at the highest test temperature of 160°C. The results of load relaxation testing showed that initially load loss proceeded rapidly and then deminished gradually with time. Load loss increased with temperature and almost all the curves approximated to a logarithmic decay of preload with time. ZA alloys exhibited almost the same load loss at lower temperature, but at 120°C ZA27 improved its relative performance with the passage of time. High damping capacity alloys and LM25 had much better resistance to load loss than ZA alloys and LM25 was found to be the best against load loss among these alloys. A preliminary equation was derived to correlate the retained load with time and temperature.

Les plasmocytes et leur niche: Étude de la génération de plasmocytes humains in vitro

Chez l’humain, les lymphocytes B mémoires IgG+ et IgA+ sont des cellules clés de l’immunité humorale. Ces cellules mémoires sont maintenues à long-terme dans notre organisme. Elles représentent une défense rapide et efficace contre toutes les infections que nous avons déjà vaincues pendant notre vie. Ces cellules mémoires qui rencontrent à nouveau leur antigène se différencient rapidement en plasmocytes à courte vie, et permettent la sécrétion massive d’immunoglobuline (Ig). La contrepartie mémoire de ces cellules sont les plasmocytes à longue vie qui sont présents dans les niches de la moelle osseuse et y sécrètent en permanence des anticorps protecteurs qui circulent dans le sang. Ces cellules sécrétrices peuvent avoir une durée de vie allant de dizaines d’années à la vie entière de l’individu. Les patients qui reçoivent des traitements de chimiothérapie ou de radiothérapie sont privés de ces cellules mémoires détruites par ces traitements au même titre que les cellules cancéreuses. Ces patients deviennent vulnérables aux infections et leur survie dépend de la régénération rapide de leur système hématopoïétique. Notre équipe a déjà mis au point une méthode pour préparer de grandes quantités des cellules mémoires capables de sécréter des IgG et des IgA. Les présents travaux visent à générer des plasmocytes fonctionnels et capables de survivre à long terme in vitro. La stratégie expérimentale visait à établir des conditions permettant de se rapprocher de l’environnement de la moelle osseuse. Dans un premier temps, nous avons étudié les paramètres permettant la différenciation des lymphocytes B mémoires en plasmocytes. Étant donné l’importance du potentiel redox dans l’environnement de la moelle osseuse, nous avons d’abord tenté d’en contrôler l’impact avec un antioxydant, le N-acétyle cystéine (NAC). Nos résultats ont démontré que le NAC avait un effet significatif et diminuait la phosphorylation de la protéine STAT3 en raison d’une inhibition des kinases JAK2 et JAK3. Étonnamment, cet antioxydant retardait la différenciation de nos lymphocytes B qui étaient stimulés avec une forte interaction CD40-CD154. Par la suite, la comparaison des interactions CD40-CD154 et CD27-CD70 a permis de conclure qu’il était essentiel de réduire à son minimum l’interaction CD40-CD154 et qu’il fallait ajouter les cytokines IL-6 et IL-10. Les cellules CD31+CD38+CD138+ générées présentaient un phénotype similaire à celui des plasmocytes de la moelle osseuse. Malheureusement la fréquence de ces cellules était faible et leur viabilité insuffisante. Afin d’augmenter la survie de ces cellules le dernier volet de nos travaux visait à se rapprocher des niches de la moelle osseuse. Notre but a été atteint en ajoutant des cellules mésenchymateuses issues de la moelle osseuse en présence de 8% de dioxygène (O2). Les cellules CD31+CD38+CD138+ générées ont une excellente viabilité et représentent plus de 50% des cellules totales en culture. De plus, le modèle de culture est maintenant établi dans un milieu exempt de sérum et de protéines animales. Dans l’ensemble, nos résultats permettent de proposer la production ex vivo de plasmocytes autologues avec une perspective thérapeutique pour réduire les risques d’infections des patients devenues immunodéficients, suite à un traitement de radiothérapie ou de chimiothérapie.

HPLC-DAD-ESI/MS analysis of phenolic compounds in four tomato varieties and evaluation of the antioxidant capacity

Tomato (Lycopersicon esculentum L.) is the second most important vegetable crop worldwide and a key component in the so-called “Mediterranean diet”. In the Northeastern region of Portugal, local populations still prefer to consume traditional tomato varieties which they find very tasty and healthy, as they are grown using extensive farming techniques. A previous study of our research team described the nutritional value of the round (batateiro), long (comprido), heart (coração) and yellow (amarelo) tomato varieties [1], but the phenolic profile was unknown until now. Thus, the objective of this study was to characterize the phenolic profiles of these four tomato farmers’ varieties by using HPLC-DAD-ESI/MS and evaluate its antioxidant capacity through four in vitro assays based on different reaction mechanisms. A cis p-coumaric acid derivative was the most abundant compound in yellow and round tomato varieties, while 4-O-caffeolyquinic acid was the most abundant in long and heart varieties. The most abundant flavonoid was quercetin pentosylrutinoside in the four tomato varieties. Yellow tomato presented the highest levels of phenolic compounds, including phenolic acids and flavonoids, but the lowest antioxidant activity. In turn, the round tomato gave the best results in all the antioxidant activity assays. This study demonstrated that these tomato farmers’ varieties are a source of phenolic compounds, mainly phenolic acid derivatives [2], and possess high antioxidant capacity [1]; being thus key elements in the diet to prevent chronic degenerative diseases associated to oxidative stress, such as cancer and coronary artery disease.

Bisphosphonate-related Osteonecrosis Of The Jaw: A Review Of The Literature.

Bisphosphonates (BPs) are a class of drugs used to treat osteoporosis and malignant bone metastasis. BPs show high binding capacity to the bone matrix, especially in sites of active bone metabolism. The American Society for Bone and Mineral Research defines BRONJ as an area of exposed bone in the maxillofacial region that has not healed within 8 weeks after identification by a healthcare provider in a patient who is receiving or has been exposed to a bisphosphonate and has not had radiation therapy to the craniofacial region. Bisphosphonate-related osteonecrosis of the jaw (BRONJ) can adversely affect quality of life, as it may produce significant morbidity. The American Association of Oral and Maxillofacial Surgeons (AAOMS) considers as vitally important that information on BRONJ be disseminated to other dental and medical specialties. The purpose of this work is to offer a perspective on how dentists should manage patients on BPs, to show the benefits of accurately diagnosing BRONJ, and to present diagnostic aids and treatments strategies for the condition.

Respostas da frequencia cardiaca e da pressão arterial sistemica as manobras postural passiva e de valsalva, em individuos sedentarios e atletas corredores de longa distancia

Universidade Estadual de Campinas . Faculdade de Educação Física

Adsorption kinetic, thermodynamic and desorption studies of phosphate onto hydrous niobium oxide prepared by reverse microemulsion method

A type of Nb(2)O(5)center dot 3H(2)O was synthesized and its phosphate removal potential was investigated in this study. The kinetic study, adsorption isotherm, pH effect, thermodynamic study and desorption were examined in batch experiments. The kinetic process was described by a pseudo-second-order rate model very well. The phosphate adsorption tended to increase with a decrease of pH. The adsorption data fitted well to the Langmuir model with which the maximum P adsorption capacity was estimated to be 18.36 mg-Pg(-1). The peak appearing at 1050 cm(-1) in IR spectra after adsorption was attributed to the bending vibration of adsorbed phosphate. The positive values of both Delta H degrees and Delta S degrees suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. Delta G degrees values obtained were negative indicating a spontaneous adsorption process. A phosphate desorbability of approximately 68% was observed with water at pH 12, which indicated a relatively strong bonding between the adsorbed phosphate and the sorptive sites on the surface of the adsorbent. The immobilization of phosphate probably occurs by the mechanisms of ion exchange and physicochemical attraction. Due to its high adsorption capacity, this type of hydrous niobium oxide has the potential for application to control phosphorus pollution.

Production, characterization and application of activated carbon from brewer`s spent grain lignin

Different types of activated carbon were prepared by chemical activation of brewer`s spent grain (BSG) lignin using H(3)PO(4) at various acid/lignin ratios (1, 2, or 3 g/g) and carbonization temperatures (300, 450, or 600 degrees C), according to a 2(2) full-factorial design. The resulting materials were characterized with regard to their surface area, pore volume, and pore size distribution, and used for detoxification of BSG hemicellulosic hydrolysate (a mixture of sugars, phenolic compounds, metallic ions, among other compounds). BSG carbons presented BET surface areas between 33 and 692 m(2)/g, and micro- and mesopores with volumes between 0.058 and 0.453 cm(3)/g. The carbons showed high capacity for adsorption of metallic ions, mainly nickel, iron, chromium, and silicon. The concentration of phenolic compounds and color were also reduced by these sorbents. These results suggest that activated carbons with characteristics similar to those commercially found and high adsorption capacity can be produced from BSG lignin. (C) 2009 Elsevier Ltd. All rights reserved.

Changes in optical properties caused by UV-irradiation of aquatic humic substances from the amazon river basin: Seasonal variability evaluation

Aquatic humic substances (AHS) isolated from two characteristic seasons of the Negro river, winter and summer corresponding to floody and dry periods, were structurally characterized by (13)C nuclear magnetic ressonance. Subsequently, AHS aqueous solutions were irradiated with a polychromatic lamp (290-475 nm) and monitored by its total organic carbon (TOC) content, ultraviolet-visible (UV-vis) absorbance, fluorescence and Fourier transformed infrared spectroscopy (FTIR). As a result, a photobleaching upto 80% after irradiation of 48 h was observed. Conformational rearrangements and formation of low molecular complexity structures were formed during the irradiation, as deduced from the pH decrement and the fluorescence shifting to lower wavelengths. Additionally a significant mineralization with the formation Of CO(2), CO, and inorganic carbon compounds was registered, as assumed by TOC losses of up to 70%. The differences in photodegradation between samples expressed by photobleaching efficiency were enhanced in the summer sample and related to its elevated aromatic content. Aromatic structures are assumed to have high autosensitization capacity effects mediated by the free radical generation from quinone and phenolic moieties.

The Infection of Soybean Leaves by Phakopsora pachyrhizi during Conditions of Discontinuous Wetness

The ability of Phakopsora pachyrhizi to cause infection under conditions of discontinuous wetness was investigated. In in vitro experiments, droplets of a uredospore suspension were deposited onto the surface of polystyrene. After an initial wetting period of either 1, 2 or 4 h, the drops were dried for different time intervals and then the wetness was restored for 11, 10 or 8 h. Germination and appressorium formation were evaluated. In in vivo experiments, soybean plants were inoculated with a uredospore suspension. Leaf wetness was interrupted for 1, 3 or 6 h after initial wetting periods of 1, 2 or 4 h. Then, the wetting was re-established for 11, 10 or 8 h, respectively. Rust severity was evaluated 14 days after inoculation. The germination of the spores and the formation of the appressoria on the soybean leaves after different periods of wetness were also quantified in vivo by scanning electron microscopy. P. pachyrhizi showed a high infective capacity during short periods of time. An interruption of wetness after 1 h caused average reductions in germination from 56 to 75% and in appressorium formation from 84 to 96%. Rust severity was lower in all of the in vivo treatments with discontinuous wetness when compared to the control plants. Rust severity was zero when the interruption of wetness occurred 4 h after the initial wetting. Wetting interruptions after 1 and 2 h reduced the average rust severity by 83 and 77%, respectively. The germination of the uredospores on the soybean leaves occurred after 2 h of wetness, with a maximum germination appearing after 4 h of wetness. Wetness interruption affected mainly the spores that had initiated the germination.

Spectroelectrochemical Properties and Lithium Ion Storage in Self-Assembled Nanocomposites from TiO(2)

Layer-by-layer (LbL) nanocomposite films from TiO(2) nanoparticles and tungsten-based oxides (WO(x)H(y)), as well as dip-coating films of TiO(2) nano particles, were prepared and investigated by electrochemical techniques under visible light beams, aiming to evaluate the lithium ion storage and chromogenic properties. Atomic force microscopy (AFM) images were obtained for morphological characterization of the Surface of the materials, which have similar roughness. Cyclic voltammetry and chronoamperometry measurements indicated high storage capacity of lithium ions in the LbL nanocomposite compared with the dip-coating film, which was attributed to the faster lithium ion diffusion rate within the self-assembled matrix. On the basis of the data obtained from galvanostatic intermittent titration technique (GITT), the values of lithium ion diffusion coefficient (D(Li)) for TiO(2)/WO(x)H(y) were larger compared with those for TiO(2). The rate of the coloration front in the matrices was investigated using a spectroelectrochemical method based oil GITT, allowing the determination of the ""optical"" diffusion coefficient (D(op)) as a function of the amount of lithium ions previously inserted into the matrices. The Values of D(Li) and D(op) suggested the existence of phases with distinct contribution to lithium ion diffusion rates and electrochromic efficiency. Moreover, these results aided a better understanding of the temporal change of current density and absorbance during the ionic electro-insertion, which is important for the possible application of these materials in lithium ion batteries and electrohromic devices.

Determination of P-glycoprotein, MDR-related protein 1, breast cancer resistance protein, and lung-resistance protein expression in leukemic stem cells of acute myeloid leukemia

Background: The most primitive leukemic precursor in acute myeloid leukemia (AML) is thought to be the leukemic stem cell (LSC), which retains the properties of self-renewal and high proliferative capacity and quiescence of the hematopoietic stem cell. LSC seems to be immunophenotypically distinct and more resistant to chemotherapy than the more committed blasts. Considering that the multidrug resistance (MDR) constitutive expression may be a barrier to therapy in AML, we have investigated whether various MDR transporters were differentially expressed at the protein level by different leukemic subsets. Methods: The relative expression of the drug-efflux pumps P-gp, MRP, LRP, and BCRP was evaluated by mean fluorescence index (MFI) and the Kolmogorov-Smirnov analysis (D values) in five leukemic subpopulations: CD34(+)CD38(-)CD123(+) (LSCs), CD34(+)CD38(+)CD123(-), CD34(+)CD38(+)CD123(+), CD34(+)CD38(+)CD123(-), and CD34(-) mature cells in 26 bone marrow samples of CD34(+) AML cases. Results: The comparison between the two more immature subsets (LSC versus CD34(+)CD38(-)CD123(-) cells) revealed a higher P-gp, MRP, and LRP expression in LSCs. The comparative analysis between LSCs and subsets of intermediate maturation (CD34(+)CD38(+)) demonstrated the higher BCRP expression in the LSCs. In addition, P-gp expression was also significantly higher in the LSC compared to CD34(+)CD38(+)CD123(-) subpopulation. Finally, the comparative analysis between LSC and the most mature subset (CD34(-)) revealed higher MRP and LRP and lower P-gp expression in the LSCs. Conclusions: Considering the cellular heterogeneity of AML, the higher MDR transporters expression at the most immature, self-renewable, and quiescent LSC population reinforces that MDR is one of the mechanisms responsible for treatment failure. (C) 2008 Clinical Cytometry Society.

Geography's emerging cross-disciplinary links: Process, causes, outcomes and challenges

In Australian universities the discipline of Geography has been the pace-setter in forging cross-disciplinary links to create multidisciplinary departments and schools, well ahead of other disciplines in humanities, social sciences and sciences, and also to a greater extent than in comparable overseas university systems. Details on all cross-disciplinary links and on immediate outcomes have been obtained by surveys of all heads of departments/schools with undergraduate Geography programs. These programs have traced their own distinctive trajectories, with ramifying links to cognate fields of enquiry, achieved through mergers, transfers, internal initiatives and, more recently, faculty-wide restructuring to create supradisciplinary schools. Geography's `exceptionalism' has proved short-lived. Disciplinary flux is now extending more widely within Australian universities, driven by a variety of internal and external forces, including: intellectual questioning and new ways of constituting knowledge; technological change and the information revolution; the growth of instrumentalism and credentialism, and managerialism and entre-preneurial imperatives; reinforced by a powerful budgetary squeeze. Geographers are proving highly adaptive in pursuit of cross-disciplinary connections, offering analytical tools and selected disciplinary insights useful to non-geographers. However, this may be at cost to undergraduate programs focussing on Geography's intellectual core. Whereas formerly Geography had high reproductive capacity but low instrumental value it may now be in a phase of enhanced utility but perilously low reproductive capacity.

Characterisation of grafted supports used for solid-phase synthesis

A series of 'pellicular' type supports were fabricated by direct gamma-radiation-mediated graft polymerisation of styrene onto polypropylene, followed by aminomethylation. Raman spectroscopy was used for measuring the level of penetration of polystyrene graft into polypropylene, and other structural features such as density of graft and depth of functionalisation. The kinetics of the coupling of fluorenylmethylcarbamate (Fmoc)-labelled amino acids, to the aminomethylated polystyrene grafts have been measured by UV absorption followed cleavage of the Fmoc chromophore. The Raman spectroscopy results showed that for this series of experiments the calculated rate coefficient for coupling of Fmoc-labelled amino acids was primarily dependent on graft thickness, but was also influenced by the proportion of polystyrene graft to polypropylene. In general, it was also shown that with increasing loading capacity of support the calculated rate coefficient for amino-acid coupling decreased correspondingly. In addition, a support that had both a high rate coefficient and a high loading capacity was prepared from polypropylene base material with a co-continuous porous structure (high surface area). (C) 2003 Society of Chemical Industry.