907 resultados para Growth and physiology of chitinoclastic bacteria
Resumo:
The aim of this investigation was to elucidate the roles of insulin-like growth factor-I (IGF-I) and transferrin in the survival and proliferation of Chinese hamster ovary (CHO) cells upon withdrawal of serum. For this purpose, we employed DNA analysis and now cytometry to compare CHO cell lines expressing either IGF-I alone or IGF-I and transferrin. The ability of cells to cycle and the occurrence of apoptosis were monitored in these cells in serum-free medium. These results indicate that IGF-I alone is able to maintain the viability of CHO cells for an extended length of time in the absence of serum. Transferrin alone does not promote survival or proliferation. Only in the presence of both IGF-I and transferrin do cells survive and proliferate. Therefore, in attached CHO cultures, IGF-I alone does not stimulate cell proliferation but is a requirement for growth in serum-free medium in cooperation with transferrin. We report on the dual role of IGF-I as a survival factor in CHO cells and its interlocking role with transferrin to stimulate cell growth.
Resumo:
Objective. To determine the slow crack growth (SCG) and Weibull parameters of five dental ceramics: a vitreous porcelain (V), a leucite-based porcelain (D), a leucite-based glass-ceramic (E1), a lithium disilicate glass-ceramic (E2) and a glass-infiltrated alumina composite (IC). Methods. Eighty disks (empty set 12mm x 1.1mm thick) of each material were constructed according to manufacturers` recommendations and polished. The stress corrosion susceptibility coefficient (n) was obtained by dynamic fatigue test, and specimens were tested in biaxial flexure at five stress rates immersed in artificial saliva at 37 degrees C. Weibull parameters were calculated for the 30 specimens tested at 1MPa/s in artificial saliva at 37 degrees C. The 80 specimens were distributed as follows: 10 for each stress rate (10(-2), 10(-1), 10(1), 10(2) MPa/s), 10 for inert strength (10(2) MPa/s, silicon oil) and 30 for 10(0) MPa/s. Fractographic analysis was also performed to investigate the fracture origin. Results. E2 showed the lowest slow crack growth susceptibility coefficient (17.2), followed by D (20.4) and V (26.3). E1 and IC presented the highest n values (30.1 and 31.1, respectively). Porcelain V presented the lowest Weibull modulus (5.2). All other materials showed similar Weibull modulus values, ranging from 9.4 to 11.7. Fractographic analysis indicated that for porcelain D, glass-ceramics E1 and E2, and composite IC crack deflection was the main toughening mechanism. Significance. This study provides a detailed microstructural and slow crack growth characterization of widely used dental ceramics. This is important from a clinical standpoint to assist the clinician in choosing the best ceramic material for each situation as well as predicting its clinical longevity. It also can be helpful in developing new materials for dental prostheses. (c) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Resumo:
In recent years, several new coffee cultivars recommended for different regions have been released. However, the performance of these varieties in many traditionally producing regions is unknown. Difference of climate and soil may jeopardize the productivity of the new cultivars and cause losses to farmers. The objective of this study is to evaluate the vegetative growth and productive genotypes of C. arabica in the conditions of the Northwestern Rio de Janeiro State, Brazil. The experiment was settled in 2007, in Panorama 1 Farm, located in the municipality of Varre Sai, RJ. Twenty-five genotypes of C. arabica were planted in a spacing of 2.5 × 0.8 m, using a completely randomized design with five replications and eight plants per plot. There were eight measurements of vegetative growth represented by plant height, stem diameter and number of plagiotropic branches. Assessments of productivity were also performed in years 2009 and 2010. There was a positive phenotypic correlation among vegetative characteristics and between vegetative characteristics and yield in the first harvest, while in the second harvest only the number of plagiotropic branches was positively correlated with yield. Up to date, the genotypes Catucaí amarelo 2 SL, Catiguá MG 02, Acauã, Palma II, Sabiá 398, IPR 103/ Iapar, IPR 100/Iapar, H 419-10-6-2-12-1, Catucaí amarelo 24 / 137, Iapar 59, Catucaí amarelo 20/15, H 419-10-6-2-5-10-1 and H 419-10-6-2-5-1 had the highest average yield after two harvests.
Resumo:
Cu2ZnSnS4 (CZTS) and Cu2ZnSnSe4 (CZTSe) with their band gap energies around 1.45 eV and 1.0 eV, respectively, can be used as the absorber layer in thin film solar cells. By using a mixture of both compounds, Cu2ZnSn(S,Se)4 (CZTSSe), a band gap tuning may be possible. The latter material has already shown promising results such as solar cell efficiencies up to 10.1%. In this work, CZTSSe thin films were grown in order to study its structure and to establish the best growth precursors. SEM micrographs reveal an open columnar structure for most samples and EDS composition profiling of the cross sections show different selenium gradients. X-ray diffractograms show different shifts of the kesterite/stannite (1 1 2) peak, which indicate the presence of CZTSSe. From Raman scattering analysis, it was concluded that all samples had traces of CZTS and CZTSSe. The composition of the CZTSSe layer was estimated using X-ray diffraction and Raman scattering and both results were compared. It was concluded that Se diffused more easily in precursors with ternary Cu–Sn–S phases and metallic Zn than in precursors with ZnS and/or CZTS already formed. It was also showed that a combination of X-ray diffraction and Raman scattering can be used to estimate the ratio of S per Se in CZTSSe samples.
Resumo:
The opto-electronic properties of copper zinc tin sulfide can be tuned to achieve better cell efficiencies by controlled incorporation of selenium. In this paper we report the growth of Cu2ZnSn(S,Se)4 (CZTSSe) using a hybrid process involving the sequential evaporation of Zn and sputtering of the sulfide precursors of Cu and Sn, followed by a selenization step. Two approaches for selenization were followed, one using a tubular furnace and the other using a rapid thermal processor. The effects of annealing conditions on the morphological and structural properties of the films were investigated. Scanning electron microscopy and energy dispersive spectroscopy were employed to investigate the morphology and composition of the films. Structural analyses were done using X-ray diffraction (XRD) and Raman spectroscopy. Structural analyses revealed the formation of CZTSSe. This study shows that regardless of the selenization method a temperature above 450 °C is required for conversion of precursors to a compact CZTSSe layer. XRD and Raman analysis suggests that the films selenized in the tubular furnace are selenium rich whereas the samples selenized in the rapid thermal processor have higher sulfur content.
Resumo:
2015
Resumo:
2nd ed.
Resumo:
1st ed.
Resumo:
ZnO, Epitaxy, Metal organic vapor phase epitaxy, MOCVD, CVD, Semiconductor, Optoelectronics, X-ray diffraction, Cathodoluminescence, Microelectronics
Resumo:
Magdeburg, Univ., Fak. für Naturwiss., Diss., 2010
Resumo:
In order to obtain informations concerning the dry matter production and extraction of nutrients by the fruits of the varieties 'Ohio Beauty' and 'Brasil', a trial was conducted on a Latossol Vermelho Escuro-Orto (USTOX) at Buri , State of São Paulo, Brazil. The fruits were collected from trees grafted on 'Doucin' being 1-2; 3-4; 4-5, and 6-7 years old. Chemical analysis were run on the fruits for: N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, Zn, and Mo; as well for the dry mat ter production. The main conclusions are as follows: a) differences were observed on dry matter production of fruits by the two varieties at the different stages of growth; b) differences were observed on exportation of nutrients between the two varieties concerning the fruit growth period- the nutrient exportation by the fruits obeyed following order: K>N>P>S>Ca>Mg>Fe>B > Cu > Mn > Zn > Mo.
Resumo:
Otto-von-Guericke-Universität Magdeburg, Fakultät für Verfahrens- und Systemtechnik, Univ., Dissertation, 2015
Resumo:
n.s. no.50(1988)
Resumo:
Adaptive immunity is initiated in T-cell zones of secondary lymphoid organs. These zones are organized in a rigid 3D network of fibroblastic reticular cells (FRCs) that are a rich cytokine source. In response to lymph-borne antigens, draining lymph nodes (LNs) expand several folds in size, but the fate and role of the FRC network during immune response is not fully understood. Here we show that T-cell responses are accompanied by the rapid activation and growth of FRCs, leading to an expanded but similarly organized network of T-zone FRCs that maintains its vital function for lymphocyte trafficking and survival. In addition, new FRC-rich environments were observed in the expanded medullary cords. FRCs are activated within hours after the onset of inflammation in the periphery. Surprisingly, FRC expansion depends mainly on trapping of naïve lymphocytes that is induced by both migratory and resident dendritic cells. Inflammatory signals are not required as homeostatic T-cell proliferation was sufficient to trigger FRC expansion. Activated lymphocytes are also dispensable for this process, but can enhance the later growth phase. Thus, this study documents the surprising plasticity as well as the complex regulation of FRC networks allowing the rapid LN hyperplasia that is critical for mounting efficient adaptive immunity.