Implementación de metodologías logísticas para la optimización de operaciones de adecuación y acondicionamiento de vehículos para el SITP en Bogotá

Hoy en día, Bogotá cuenta con aproximadamente 15800 buses de servicio público, no obstante, alrededor de un 45% de esta flota se encuentra en un estado crítico. La existencia de modelos de buses previos al 2003, la falta de revisiones periódicas, negligencias en el cumplimiento de los requisitos para la prestación del servicio, la resistencia al cambio por parte de los transportistas, y demás factores dificultan la labor de actualizar y unificar la flota en el actual plan del Sistema Integrado de Transporte de la ciudad. El Sistema integrado de transporte procura introducir un sistema confiable, eficaz, y rápido que se adapte a la creciente necesidad de movilidad en Bogotá. Este sistema tiene como propósito la integración del sistema Transmilenio con la estructura tradicional de transporte masivo; se pretende complementar, fortalecer e integrar todos los eslabones de transporte segmentado que existen en la ciudad. Las primeras fases del sistema pretenden cambiar la estructura de flota afiliadora a operadora como funciona en Transmilenio, crear un sistema organizado e integrado de buses de servicio público (Urbano, Especial, Complementario, Troncal y Alimentador), y asegurar la calidad en el servicio. El presente proyecto pretende evaluar, analizar y optimizar los procesos que permitirían la adecuación extensiva de la flota de transporte público para su introducción al Sistema Integrado de Transporte. Los procesos principales incluyen la adecuación de todos los vehículos antiguos (modelos anteriores al 2003 pasan por un proceso de reparación, mantenimiento, acondicionamiento) y la implementación de sistemas de tecnológicos. En adición, se plantea crear un sistema homogéneo que permite estándares de calidad y facilidad de mantenimiento.

The Intrapreneur Innovation:Led by Medium and Small Size Companies‘Managers*(Qualitative Research)

This research is focused on an exploratory study developed with Pymes managers and theirroles as intrapreneurs. Using their leadership to impel innovation into organizations.Looking to determined how Pymes employers incentive into organizations individuals or groupinnovations. Therefore, it is possible to think that managers lead the innovation process, whichis classified gradually according to companies needs in order to improve their competitiveness.Organization must have intrapreneuring and organized culture with flexible structure to generateindividual autonomy. A characteristic is the amount of capital risk needed; that is why it isnecessary encourage their work and their risk tolerance.

Comparative evaluation of a new effective population size estimator based on approximate Bayesian computation

We describe and evaluate a new estimator of the effective population size (N-e), a critical parameter in evolutionary and conservation biology. This new "SummStat" N-e. estimator is based upon the use of summary statistics in an approximate Bayesian computation framework to infer N-e. Simulations of a Wright-Fisher population with known N-e show that the SummStat estimator is useful across a realistic range of individuals and loci sampled, generations between samples, and N-e values. We also address the paucity of information about the relative performance of N-e estimators by comparing the SUMMStat estimator to two recently developed likelihood-based estimators and a traditional moment-based estimator. The SummStat estimator is the least biased of the four estimators compared. In 32 of 36 parameter combinations investigated rising initial allele frequencies drawn from a Dirichlet distribution, it has the lowest bias. The relative mean square error (RMSE) of the SummStat estimator was generally intermediate to the others. All of the estimators had RMSE > 1 when small samples (n = 20, five loci) were collected a generation apart. In contrast, when samples were separated by three or more generations and Ne less than or equal to 50, the SummStat and likelihood-based estimators all had greatly reduced RMSE. Under the conditions simulated, SummStat confidence intervals were more conservative than the likelihood-based estimators and more likely to include true N-e. The greatest strength of the SummStat estimator is its flexible structure. This flexibility allows it to incorporate any, potentially informative summary statistic from Population genetic data.

Dual semiosis analysis model managing customer-focused service innovation

Customers will not continue to pay for a service if it is perceived to be of poor quality, and/or of no value. With a paradigm shift towards business dependence on service orientated IS solutions [1], it is critical that alignment exists between service definition, delivery, and customer expectation, businesses are to ensure customer satisfaction. Services, and micro-service development, offer businesses a flexible structure for solution innovation, however, constant changes in technology, business and societal expectations means an iterative analysis solution is required to i) determine whether provider services adequately meet customer segment needs and expectations, and ii) to help guide business service innovation and development. In this paper, by incorporating multiple models, we propose a series of steps to help identify and prioritise service gaps. Moreover, the authors propose the Dual Semiosis Analysis Model, i.e. a tool that highlights where within the symbiotic customer / provider semiosis process, requirements misinterpretation, and/or service provision deficiencies occur. This paper offers the reader a powerful customer-centric tool, designed to help business managers highlight both what services are critical to customer quality perception, and where future innovation

Fatores que impactam a implantação de tecnologias de gestão baseadas em processos em uma empresa pública

O mundo está passando por grandes mudanças que vêm afetando as esferas sociais, tecnológicas, empresariais e mentais. As empresas têm sido ameaçadas por diversos fatores como rapidez no lançamento de novos produtos, interferência dos governos, clientes cada vez mais conscientes e exigentes, aumento da concorrência, globalização e o surgimento constante de novas tecnologias. Essas mudanças exigem das empresas uma estrutura mais flexível capaz de absorver as rápidas necessidades do ambiente, e o formato atual não tem se mostrado adequado para vencer estes desafios. Nesse contexto, a gestão baseada em processos tem se mostrado promissora ao ser incorporada nas principais tecnologias de gestão como BSC, NBR ISO 9000, gestão de custos com ABC, entre outras. Como toda nova abordagem, as tecnologias (ou modelos) baseadas em processos sofrem de vários problemas, sendo alguns já conhecidos, como resistência às mudanças, falta de preparo e apoio insuficiente da alta direção. Os estudos desses fatores são incipientes e em sua maioria não tratam de seus impactos em empresas públicas. Esse trabalho tem como objetivo justamente identificar esses fatores na literatura (teoria e casos de estudo) e confrontá-los com aqueles encontrados em uma empresa pública (estudo de caso), analisando sua pertinência. Os resultados encontrados, além de confirmarem os fatores, sugerem que a sua utilização, na forma de um checklist, podem beneficiar as empresas na prevenção, redução ou eliminação de problemas que impactam ou inviabilizam um projeto.

Coupling rate measurement of a novel multi-actuated piezoelectric device using optical interferometry

The class of piezoelectric actuators considered in this paper consists of a multi-flexible structure actuated by two or more piezoceramic devices that must generate different output displacements and forces at different specified points of the domain and in different directions. The devices were modeled by finite element using the software ANSYS and the topology optimization method. The following XY actuators were build to achieve maximum displacement in the X and Y directions with a minimum crosstalk between them. The actuator prototypes are composed of an aluminum structure, manufactured by using a wire Electrical Discharge Machining, which are bonded to rectangular PZT5A piezoceramic blocks by using epoxy resin. Multi-actuator piezoelectric device displacements can be measured by using optical interferometry, since it allows dynamic measurements in the kHz range, which is of the order of the first resonance frequency of these piezomechanisms. A Michelson-type interferometer, with a He-Ne laser source, is used to measure the displacement amplitudes in nanometric range. A new optical phase demodulation technique is applied, based on the properties of the triangular waveform drive voltage applied to the XY piezoelectric nanopositioner. This is a low-phase-modulation-depth-like technique that allows the rapid interferometer auto-calibration. The measurements were performed at 100 Hz frequency, and revealed that the device is linear voltage range utilized in this work. The ratio between the generated and coupled output displacements and the drive voltages is equal to 10.97 nm/V and 1.76 nm/V, respectively, which corresponds to a 16% coupling rate. © 2010 IEEE.

Método de detecção interferométrica de fase, com baixa profundidade de modulação, aplicado à medição de deslocamentos nanométricos em atuadores e mini-manipuladores piezoelétricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise teórica e experimental vibro-acústica utilizando a técnica de matrizes compactas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Controle ativo de vibrações em estruturas flexíveis utilizando desigualdades matriciais lineares (LMIs)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Planejamento de sistemas de distribuição de energia elétrica de média tensão através de um algoritmo de busca dispersa

Pós-graduação em Engenharia Elétrica - FEIS

Lumped element modeling of operational structures by inverting the mobility models

This paper is concerned with what a source precisely sees when it drives a receiver such as a continuous structural object. An equivalent lumped element system consisting of masses, springs and dampers is developed to visually represent the operational structural dynamics of a single-input structure at the driving point. The development is solely based on the mobility model of the driving point response. The mobility model is mathematically inverted to give the impedance model that is suitable for lumped element modeling. The two types of structures studied are unconstrained inertial objects and constrained resilient objects. The lumped element systems presented suggest a new view to dynamics that a single-input flexible structure in operation can be decomposed into the two subsystems: a base system of single degree of freedom (or of a mass for an inertial object) whose mass is in contact with the source and an appendage system consisting of a series of oscillators each of which is attached to the base mass. The driving point response is a result of the coupling between the two subsystems. (C) 2014 Elsevier Ltd. All rights reserved.

Controle ativo de estruturas reticuladas utilizando atuadores de pilha de pzt

Pós-graduação em Engenharia Mecânica - FEIS

Robust and optimal adjustment of Power System Stabilizers through Linear Matrix Inequalities

This work presents the application of Linear Matrix Inequalities to the robust and optimal adjustment of Power System Stabilizers with pre-defined structure. Results of some tests show that gain and zeros adjustments are sufficient to guarantee robust stability and performance with respect to various operating points. Making use of the flexible structure of LMI's, we propose an algorithm that minimizes the norm of the controllers gain matrix while it guarantees the damping factor specified for the closed loop system, always using a controller with flexible structure. The technique used here is the pole placement, whose objective is to place the poles of the closed loop system in a specific region of the complex plane. Results of tests with a nine-machine system are presented and discussed, in order to validate the algorithm proposed. (C) 2012 Elsevier Ltd. All rights reserved.

REDE SOCIAL CAFÉS DO BRASIL: UMA ANÁLISE COMUNICACIONAL

Este trabalho teve como objetivo descrever e analisar a rede social Cafés do Brasil rede social na Internet criada para integrar cafeicultores, agrônomos, pesquisadores e demais agentes que atuam no agronegócio café - a partir da comunicação estabelecida entre seus atores, procurando, ainda, avaliar a adequação desta nova formatação de rede social para o processo de comunicação à transferência de informação tecnológica ao setor produtivo e para a interação dos agentes que atuam nos diversos segmentos da cadeia agroindustrial do café. A principal metodologia empregada foi a Análise de Redes Sociais (ARS) que, por meio de análises matemáticas e estatísticas, fundamentadas na modelagem por meio de grafos (sociogramas), permitiu-nos não só descrever as propriedades estruturais da rede estudada, como interpretar e criar significados para as relações sociais identificadas na rede. Os resultados obtidos caracterizam a rede Cafés do Brasil como uma rede pouco conectada tanto no âmbito das relações estabelecidas entre seus atores pela troca de mensagens por e-mail, quanto nos espaços destinados à discussão e debates sobre temas relacionados ao setor. À guisa de conclusões pode-se afirmar que, apesar de possuir estrutura aberta e flexível, e ferramentas que facilitam o compartilhamento de informações, a rede Cafés do Brasil não foi capaz até o momento de integrar de forma satisfatória os agentes da cadeia agroindustrial do café que dela participam, e sua formatação atual não favorece substancialmente o processo de comunicação para a transferência de tecnologia ao setor produtivo. Com base no estudo, apresentamos sugestões para ajustes na configuração da rede de forma a adequá-la aos objetivos para os quais foi construída.(AU)

Flexibility of short-strand RNA in aqueous solution as revealed by molecular dynamics simulation:are A′-RNA and A-RNA distinct conformational structures?

We use molecular dynamics simulations to compare the conformational structure and dynamics of a 21-base pair RNA sequence initially constructed according to the canonical A-RNA and A'-RNA forms in the presence of counterions and explicit water. Our study aims to add a dynamical perspective to the solid-state structural information that has been derived from X-ray data for these two characteristic forms of RNA. Analysis of the three main structural descriptors commonly used to differentiate between the two forms of RNA namely major groove width, inclination and the number of base pairs in a helical twist over a 30 ns simulation period reveals a flexible structure in aqueous solution with fluctuations in the values of these structural parameters encompassing the range between the two crystal forms and more. This provides evidence to suggest that the identification of distinct A-RNA and A'-RNA structures, while relevant in the crystalline form, may not be generally relevant in the context of RNA in the aqueous phase. The apparent structural flexibility observed in our simulations is likely to bear ramifications for the interactions of RNA with biological molecules (e.g. proteins) and non-biological molecules (e.g. non-viral gene delivery vectors). © CSIRO 2009.