Liquid-liquid phase transition for soft-core attractive potential

Using event-driven molecular dynamics simulations, we study a three-dimensional one-component system of spherical particles interacting via a discontinuous potential combining a repulsive square soft core and an attractive square well. In the case of a narrow attractive well, it has been shown that this potential has two metastable gas-liquid critical points. Here we systematically investigate how the changes of the parameters of this potential affect the phase diagram of the system. We find a broad range of potential parameters for which the system has both a gas-liquid critical point C1 and a liquid-liquid critical point C2. For the liquid-gas critical point we find that the derivatives of the critical temperature and pressure, with respect to the parameters of the potential, have the same signs: they are positive for increasing width of the attractive well and negative for increasing width and repulsive energy of the soft core. This result resembles the behavior of the liquid-gas critical point for standard liquids. In contrast, for the liquid-liquid critical point the critical pressure decreases as the critical temperature increases. As a consequence, the liquid-liquid critical point exists at positive pressures only in a finite range of parameters. We present a modified van der Waals equation which qualitatively reproduces the behavior of both critical points within some range of parameters, and gives us insight on the mechanisms ruling the dependence of the two critical points on the potential¿s parameters. The soft-core potential studied here resembles model potentials used for colloids, proteins, and potentials that have been related to liquid metals, raising an interesting possibility that a liquid-liquid phase transition may be present in some systems where it has not yet been observed.

Rationale and design of a randomized, double-blind, parallel-group study of terutroban 30 mg/day versus aspirin 100 mg/day in stroke patients: the prevention of cerebrovascular and cardiovascular events of ischemic origin with terutroban in patients with a history of ischemic stroke or transient ischemic attack (PERFORM) study.

BACKGROUND: Ischemic stroke is the leading cause of mortality worldwide and a major contributor to neurological disability and dementia. Terutroban is a specific TP receptor antagonist with antithrombotic, antivasoconstrictive, and antiatherosclerotic properties, which may be of interest for the secondary prevention of ischemic stroke. This article describes the rationale and design of the Prevention of cerebrovascular and cardiovascular Events of ischemic origin with teRutroban in patients with a history oF ischemic strOke or tRansient ischeMic Attack (PERFORM) Study, which aims to demonstrate the superiority of the efficacy of terutroban versus aspirin in secondary prevention of cerebrovascular and cardiovascular events. METHODS AND RESULTS: The PERFORM Study is a multicenter, randomized, double-blind, parallel-group study being carried out in 802 centers in 46 countries. The study population includes patients aged > or =55 years, having suffered an ischemic stroke (< or =3 months) or a transient ischemic attack (< or =8 days). Participants are randomly allocated to terutroban (30 mg/day) or aspirin (100 mg/day). The primary efficacy endpoint is a composite of ischemic stroke (fatal or nonfatal), myocardial infarction (fatal or nonfatal), or other vascular death (excluding hemorrhagic death of any origin). Safety is being evaluated by assessing hemorrhagic events. Follow-up is expected to last for 2-4 years. Assuming a relative risk reduction of 13%, the expected number of primary events is 2,340. To obtain statistical power of 90%, this requires inclusion of at least 18,000 patients in this event-driven trial. The first patient was randomized in February 2006. CONCLUSIONS: The PERFORM Study will explore the benefits and safety of terutroban in secondary cardiovascular prevention after a cerebral ischemic event.

Analysis of Industrial Granular Flow Applications by Using Advanced Collision Models

Granular flow phenomena are frequently encountered in the design of process and industrial plants in the traditional fields of the chemical, nuclear and oil industries as well as in other activities such as food and materials handling. Multi-phase flow is one important branch of the granular flow. Granular materials have unusual kinds of behavior compared to normal materials, either solids or fluids. Although some of the characteristics are still not well-known yet, one thing is confirmed: the particle-particle interaction plays a key role in the dynamics of granular materials, especially for dense granular materials. At the beginning of this thesis, detailed illustration of developing two models for describing the interaction based on the results of finite-element simulation, dimension analysis and numerical simulation is presented. The first model is used to describing the normal collision of viscoelastic particles. Based on some existent models, more parameters are added to this model, which make the model predict the experimental results more accurately. The second model is used for oblique collision, which include the effects from tangential velocity, angular velocity and surface friction based on Coulomb's law. The theoretical predictions of this model are in agreement with those by finite-element simulation. I n the latter chapters of this thesis, the models are used to predict industrial granular flow and the agreement between the simulations and experiments also shows the validation of the new model. The first case presents the simulation of granular flow passing over a circular obstacle. The simulations successfully predict the existence of a parabolic steady layer and show how the characteristics of the particles, such as coefficients of restitution and surface friction affect the separation results. The second case is a spinning container filled with granular material. Employing the previous models, the simulation could also reproduce experimentally observed phenomena, such as a depression in the center of a high frequency rotation. The third application is about gas-solid mixed flow in a vertically vibrated device. Gas phase motion is added to coherence with the particle motion. The governing equations of the gas phase are solved by using the Large eddy simulation (LES) and particle motion is predicted by using the Lagrangian method. The simulation predicted some pattern formation reported by experiment.

Oral rivaroxaban for symptomatic venous thromboembolism.

BACKGROUND: Rivaroxaban, an oral factor Xa inhibitor, may provide a simple, fixed-dose regimen for treating acute deep-vein thrombosis (DVT) and for continued treatment, without the need for laboratory monitoring. METHODS: We conducted an open-label, randomized, event-driven, noninferiority study that compared oral rivaroxaban alone (15 mg twice daily for 3 weeks, followed by 20 mg once daily) with subcutaneous enoxaparin followed by a vitamin K antagonist (either warfarin or acenocoumarol) for 3, 6, or 12 months in patients with acute, symptomatic DVT. In parallel, we carried out a double-blind, randomized, event-driven superiority study that compared rivaroxaban alone (20 mg once daily) with placebo for an additional 6 or 12 months in patients who had completed 6 to 12 months of treatment for venous thromboembolism. The primary efficacy outcome for both studies was recurrent venous thromboembolism. The principal safety outcome was major bleeding or clinically relevant nonmajor bleeding in the initial-treatment study and major bleeding in the continued-treatment study. RESULTS: The study of rivaroxaban for acute DVT included 3449 patients: 1731 given rivaroxaban and 1718 given enoxaparin plus a vitamin K antagonist. Rivaroxaban had noninferior efficacy with respect to the primary outcome (36 events [2.1%], vs. 51 events with enoxaparin-vitamin K antagonist [3.0%]; hazard ratio, 0.68; 95% confidence interval [CI], 0.44 to 1.04; P<0.001). The principal safety outcome occurred in 8.1% of the patients in each group. In the continued-treatment study, which included 602 patients in the rivaroxaban group and 594 in the placebo group, rivaroxaban had superior efficacy (8 events [1.3%], vs. 42 with placebo [7.1%]; hazard ratio, 0.18; 95% CI, 0.09 to 0.39; P<0.001). Four patients in the rivaroxaban group had nonfatal major bleeding (0.7%), versus none in the placebo group (P=0.11). CONCLUSIONS: Rivaroxaban offers a simple, single-drug approach to the short-term and continued treatment of venous thrombosis that may improve the benefit-to-risk profile of anticoagulation. (Funded by Bayer Schering Pharma and Ortho-McNeil; ClinicalTrials.gov numbers, NCT00440193 and NCT00439725.).

The Dynamics of Force Fluctuations in Shear Granular Flows

Tämän työn tavoitteena oli tutkia rakeisen materiaalin kinematiikkaa ja rakentaa koelaitteisto rakeisen materiaalin leikkausjännitysvirtauksien tutkimiseen. Kokeellisessa osassa on keskitytty sisäisiin voimaheilahteluihin ja niiden ymmärtämiseen. Teoriaosassa on käyty läpi rakeisen materiaalin yleisiä ominaisuuksia ja lisäksi on esitetty kaksi eri tapaa mallintaa fysikaalisien ominaisuuksien heilahteluja rakeisessa materiaalissa. Nämä kaksi esitettyä mallinnusmenetelmää ovat skalaarinen q-malli ja simulointi. Skalaarinen q-malli määrittelee jokaiseen yksittäiseen rakeeseen kohdistuvan jännityksen, rakeen ollessa osa 2- tai 3-dimensionaalista asetelmaa. Tämän mallin perusidea on kuvata jännityksien epähomogeenisuutta, joka johtuu rakeiden satunnaisasettelusta. Simulointimallinnus perustuu event-driven algoritmiin, missä systeemin dynamiikkaa kuvataan yksittäisillä partikkelien törmäyksillä. Törmäyksien vaiheet ratkaistiin käyttämällä liikemääräyhtälöitä ja restituution määritelmää. Teoriaosuudessa käytiin vielä pieniltä osin läpi syitä jännitysheilahteluihin ja rakeisen materiaalin lukkiintumiseen. Tutkimuslaitteistolla tutkittiin rakeisen materiaalin käyttäytymistä rengasmaisessa leikkausjännitysvirtauksessa. Tutkimusosuuden päätavoitteena oli mitata partikkelien kosketuksista ja törmäyksistä johtuvia hetkellisiä voimaheilahteluja rengastilavuuden pohjalta. Rakeisena materiaalina tutkimuksessa käytettiin teräskuulia. Jännityssignaali ajan funktiona osoittaa suurta heilahtelua, joka voi olla jopa kertalukua keskiarvosta suurempaa. Tällainen suuren amplitudin omaava heilahtelu on merkittävä haittapuoli yleisesti rakeisissa materiaaleissa käytettyjen jatkuvuusmallien kanssa. Tällainen heilahtelu tekee käytetyt jatkuvuusmallit epäpäteviksi. Yleisellä tasolla jännityksien todennäköisyysjakauma on yhtäpitävä skalaarisen q-mallin tuloksien kanssa. Molemmissa tapauksissa todennäköisyysjakaumalla on eksponentiaalinen muoto.

Program hosting in communications environment with Reactor and thread pool approach

In this thesis concurrent communication event handling is implemented using thread pool approach. Concurrent events are handled with a Reactor design pattern and multithreading is implemented using a Leader/Followers design pattern. Main focus is to evaluate behaviour of implemented model by different numbers of concurrent connections and amount of used threads. Furthermore, model feasibility in a PeerHood middleware is evaluated. Implemented model is evaluated with created test environment which enables concurrent message sending from multiple connections to the system under test. Messages round trip times are measured in the tester application. In the evaluation processing delay into system is simulated and influence of delay to the average round trip time is analysed.

Scheduling of guarded command based models

Formal methods provide a means of reasoning about computer programs in order to prove correctness criteria. One subtype of formal methods is based on the weakest precondition predicate transformer semantics and uses guarded commands as the basic modelling construct. Examples of such formalisms are Action Systems and Event-B. Guarded commands can intuitively be understood as actions that may be triggered when an associated guard condition holds. Guarded commands whose guards hold are nondeterministically chosen for execution, but no further control flow is present by default. Such a modelling approach is convenient for proving correctness, and the Refinement Calculus allows for a stepwise development method. It also has a parallel interpretation facilitating development of concurrent software, and it is suitable for describing event-driven scenarios. However, for many application areas, the execution paradigm traditionally used comprises more explicit control flow, which constitutes an obstacle for using the above mentioned formal methods. In this thesis, we study how guarded command based modelling approaches can be conveniently and efficiently scheduled in different scenarios. We first focus on the modelling of trust for transactions in a social networking setting. Due to the event-based nature of the scenario, the use of guarded commands turns out to be relatively straightforward. We continue by studying modelling of concurrent software, with particular focus on compute-intensive scenarios. We go from theoretical considerations to the feasibility of implementation by evaluating the performance and scalability of executing a case study model in parallel using automatic scheduling performed by a dedicated scheduler. Finally, we propose a more explicit and non-centralised approach in which the flow of each task is controlled by a schedule of its own. The schedules are expressed in a dedicated scheduling language, and patterns assist the developer in proving correctness of the scheduled model with respect to the original one.

Process modeling method for electric accessories manufacturing enterprise

The theoretical research of the study focused to business process management and business process modeling, the goal was to found a new business process modeling method for electrical accessories manufacturing enterprise. The focus was to find few options for business process modeling methods where company could have chosen the best one for its needs The study was carried out as a qualitative research with an action study and a case study as the most important ways collect data. In the empirical part of the study examples of company’s processes modeled with the new modeling method and process modeling process are presented. The new way of modeling processes improves especially visual presentation of the processes and improves the understanding how employees should work in the organizational interfaces of the process and in the interfaces between different processes. The results of the study is a new unified way to model company’s processes, which makes it easier to understand and create the process models. This improved readability makes it possible to reduce the costs that were created from the unclear old process models.

Hedge-rahastojen menestyksen pysyvyys ja suhteellinen suoriutuminen sijoittajan näkökulmasta

The purpose of the thesis is to examine the long-term performance persistence and relative performance of hedge funds during bear and bull market periods. Performance metrics applied for fund rankings are raw return, Sharpe ratio, mean variance ratio and strategy distinctiveness index calculated of the original and clustered data correspondingly. Four different length combinations for selection and holding periods are employed. The persistence is examined using decile and quartile portfolio formatting approach and on the basis of Sharpe ratio and SKASR as performance metrics. The relative performance persistence is examined by comparing hedge portfolio returns during varying stock market conditions. The data is gathered from a private database covering 10,789 hedge funds and time horizon is set from January 1990 to December 2012. The results of this thesis suggest that long-term performance persistence of the hedge funds exists. The degree of persistence also depends on the performance metrics employed and length combination of selection and holding periods. The best results of performance persistence were obtained in the decile portfolio analysis on the basis of Sharpe ratio rankings for combination of 12-month selection period and the holding period of equal length. The results also suggest that the best performance persistence occurs in the Event Driven and Multi strategies. Dummy regression analysis shows that a relationship between hedge funds and stock market returns exists. Based on the results, Dedicated Short Bias, Global Macro, Managed Futures and Other strategies perform well during bear market periods. The results also indicate that the Market Neutral strategy is not absolutely market neutral and the Event Driven strategy has the best performance among all hedge strategies.

Reengineering and modelling of a product certification process

Työn teoriaosuudessa tutkittiin prosessien uudelleen suunnittelua, prosessien mallintamista sekä prosessimittariston rakentamista. Työn tavoitteena oli uudelleen suunnitella organisaation sertifiointiprosessi. Tämän tavoitteen saavuttamiseksi piti mallintaa nykyinen ja uusi prosessi sekä rakentaa mittaristo, joka antaisi organisaatiolle arvokasta tietoa siitä, kuinka tehokkaasti uusi prosessi toimii. Työ suoritettiin osallistuvana toimintatutkimuksena. Diplomityön tekijä oli toiminut kohdeorganisaatiossa työntekijänä jo useita vuosia ja pystyi näinollen hyödyntämään omaa tietämystään sekä nykyisen prosessin mallintamisessa, että uuden prosessin suunnittelussa. Työn tuloksena syntyi uusi sertifiointiprosessi, joka on karsitumpi ja tehokkaampi kuin edeltäjänsä. Uusi mittaristojärjestelmä rakennettiin, jota organisaation johto kykenisi seuraamaan prosessin sidosryhmien tehokkuutta sekä tuotteiden laadun kehitystä. Sivutuotteena organisaatio sai käyttöönsä yksityiskohtaiset prosessikuvaukset, joita voidaan hyödyntää koulutusmateriaalina uutta henkilöstöä rekrytoitaessa sekä informatiivisena työkaluna esiteltäessä prosessia virallisille sertifiointitahoille.

The infared optical properties of Sr2RuO4 and SmTiO3 including an object-oriented resistivity interface /

The perovskite crystal structure is host to many different materials from insulating to superconducting providing a diverse range of intrinsic character and complexity. A better fundamental description of these materials in terms of their electronic, optical and magnetic properties undoubtedly precedes an effective realization of their application potential. SmTiOa, a distorted perovskite has a strongly localized electronic structure and undergoes an antiferromagnetic transition at 50 K in its nominally stoichiometric form. Sr2Ru04 is a layered perovskite superconductor (ie. Tc % 1 K) bearing the same structure as the high-tem|>erature superconductor La2_xSrrCu04. Polarized reflectance measurements were carried out on both of these materials revealing several interesting features in the far-infrared range of the spectrum. In the case of SmTiOa, although insulating, evidence indicates the presence of a finite background optical conductivity. As the temperature is lowered through the ordering temperature a resonance feature appears to narrow and strengthen near 120 cm~^ A nearby phonon mode appears to also couple to this magnetic transition as revealed by a growing asymmetry in the optica] conductivity. Experiments on a doped sample with a greater itinerant character and lower Neel temperature = 40 K also indicate the presence of this strongly temperature dependent mode even at twice the ordering temperature. Although the mode appears to be sensitive to the magnetic transition it is unclear whether a magnon assignment is appropriate. At very least, evidence suggests an interesting interaction between magnetic and electronic excitations. Although Sr2Ru04 is highly anisotropic it is metallic in three-dimensions at low temperatures and reveals its coherent transport in an inter-plane Drude-like component to the highest temperatures measured (ie. 90 K). An extended Drude analysis is used to probe the frequency dependent scattering character revealing a peak in both the mass enhancement and scattering rate near 80 cm~* and 100 cm~* respectively. All of these experimental observations appear relatively consistent with a Fermi-liquid picture of charge transport. To supplement the optical measurements a resistivity station was set up with an event driven object oriented user interface. The program controls a Keithley Current Source, HP Nano-Voltmeter and Switching Unit as well as a LakeShore Temperature Controller in order to obtain a plot of the Resistivity as a function of temperature. The system allows for resistivity measurements ranging from 4 K to 290 K using an external probe or between 0.4 K to 295 K using a Helium - 3 Cryostat. Several materials of known resistivity have confirmed the system to be robust and capable of measuring metallic samples distinguishing features of several fiQ-cm.

Acelerando algoritmos de baixo nível em visão robótica com hardware reconfigurável

A challenge that remains in the robotics field is how to make a robot to react in real time to visual stimulus. Traditional computer vision algorithms used to overcome this problem are still very expensive taking too long when using common computer processors. Very simple algorithms like image filtering or even mathematical morphology operations may take too long. Researchers have implemented image processing algorithms in high parallelism hardware devices in order to cut down the time spent in the algorithms processing, with good results. By using hardware implemented image processing techniques and a platform oriented system that uses the Nios II Processor we propose an approach that uses the hardware processing and event based programming to simplify the vision based systems while at the same time accelerating some parts of the used algorithms

Análise de linguagens de modelagem de processos de um modelo de referência na cadeia de suprimentos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Progettazione e sviluppo di applicazioni distribuite su Web: da JavaScript a TypeScript

Il Web nel corso della sua esistenza ha subito un mutamento dovuto in parte dalle richieste del mercato, ma soprattutto dall’evoluzione e la nascita costante delle numerose tecnologie coinvolte in esso. Si è passati da un’iniziale semplice diffusione di contenuti statici, ad una successiva collezione di siti web, dapprima con limitate presenze di dinamicità e interattività (a causa dei limiti tecnologici), ma successivamente poi evoluti alle attuali applicazioni web moderne che hanno colmato il gap con le applicazioni desktop, sia a livello tecnologico, che a livello di diffusione effettiva sul mercato. Tali applicazioni web moderne possono presentare un grado di complessità paragonabile in tutto e per tutto ai sistemi software desktop tradizionali; le tecnologie web hanno subito nel tempo un evoluzione legata ai cambiamenti del web stesso e tra le tecnologie più diffuse troviamo JavaScript, un linguaggio di scripting nato per dare dinamicità ai siti web che si ritrova tutt’ora ad essere utilizzato come linguaggio di programmazione di applicazioni altamente strutturate. Nel corso degli anni la comunità di sviluppo che ruota intorno a JavaScript ha prodotto numerose librerie al supporto del linguaggio dotando così gli sviluppatori di un linguaggio completo in grado di far realizzare applicazioni web avanzate. Le recenti evoluzioni dei motori javascript presenti nei browser hanno inoltre incrementato le prestazioni del linguaggio consacrandone la sua leadership nei confronti dei linguaggi concorrenti. Negli ultimi anni a causa della crescita della complessità delle applicazioni web, javascript è stato messo molto in discussione in quanto come linguaggio non offre le classiche astrazioni consolidate nel tempo per la programmazione altamente strutturata; per questo motivo sono nati linguaggi orientati alla programmazione ad oggetti per il web che si pongono come obiettivo la risoluzione di questo problema: tra questi si trovano linguaggi che hanno l’ambizione di soppiantare JavaScript come ad esempio Dart creato da Google, oppure altri che invece sfruttano JavaScript come linguaggio base al quale aggiungono le caratteristiche mancanti e, mediante il processo di compilazione, producono codice JavaScript puro compatibile con i motori JavaScript presenti nei browser. JavaScript storicamente fu introdotto come linguaggio sia per la programmazione client-side, che per la controparte server-side, ma per vari motivi (la forte concorrenza, basse performance, etc.) ebbe successo solo come linguaggio per la programmazione client; le recenti evoluzioni del linguaggio lo hanno però riportato in auge anche per la programmazione server-side, soprattutto per i miglioramenti delle performance, ma anche per la sua naturale predisposizione per la programmazione event-driven, paradigma alternativo al multi-threading per la programmazione concorrente. Un’applicazione web di elevata complessità al giorno d’oggi può quindi essere interamente sviluppata utilizzando il linguaggio JavaScript, acquisendone sia i suoi vantaggi che gli svantaggi; le nuove tecnologie introdotte ambiscono quindi a diventare la soluzione per i problemi presenti in JavaScript e di conseguenza si propongono come potenziali nuovi linguaggi completi per la programmazione web del futuro, anticipando anche le prossime evoluzioni delle tecnologie già esistenti preannunciate dagli enti standard della programmazione web, il W3C ed ECMAScript. In questa tesi saranno affrontate le tematiche appena introdotte confrontando tra loro le tecnologie in gioco con lo scopo di ottenere un’ampia panoramica delle soluzioni che uno sviluppatore web dovrà prendere in considerazione per realizzare un sistema di importanti dimensioni; in particolare sarà approfondito il linguaggio TypeScript proposto da Microsoft, il quale è nato in successione a Dart apparentemente con lo stesso scopo, ma grazie alla compatibilità con JavaScript e soprattutto con il vasto mondo di librerie legate ad esso nate in questi ultimi anni, si presenta nel mercato come tecnologia facile da apprendere per tutti gli sviluppatori che già da tempo hanno sviluppato abilità nella programmazione JavaScript.

Ruolo delle architetture ad eventi nello sviluppo delle applicazioni moderne

Attualmente il panorama informatico è dominato dai dispositivi mobile: smartphone e tablet pc dominano incontrastati la scena del mercato elettronico. Questo comporta un radicale ripensamento e cambiamento del software, le web app e le mobile application richiedono infatti una sempre maggiore reattività dell’interfaccia utente, la persistente connessione a Internet e l’interazione con una moltitudine di dispositivi esterni. Il progettista di software deve oggi far fronte a tutta una serie di problematiche, l’aumentata complessità dei sistemi e i sempre più ristretti tempi di sviluppo e consegna richiedono compromessi tra la semplicità delle tecniche di progettazione e l’efficienza del prodotto ottenuto. Le architetture ad eventi in primis, unitamente al paradigma di programmazione asincrona, si pongono come soluzione ottimale a queste esigenze. L’obbiettivo principale di questa tesi è quello di offrire una panoramica generale sullo stato dell’arte delle architetture ad eventi focalizzandosi sul ruolo che esse assumono nel contesto delle applicazioni moderne, intendendo principalmente con questo termine le web application e le mobile application. Partendo dal concetto di programmazione sincrona e parallela si giunge a descrivere un terzo modello, il modello asincrono, di fondamentale importanza per i sistemi event-driven. Utilizzando come principale linguaggio di riferimento JavaScript si affrontano le problematiche legate alla stesura del codice per la gestione degli eventi, l’asincronicità intrinseca degli eventi e l’utilizzo di funzioni di callback portano a produrre codice di difficile lettura e manutenzione. Si analizzano quindi in dettaglio i pattern fondamentali e le tecniche attualmente utilizzate per l’ottimizzazione della gestione del codice e delle problematiche esposte fornendo numerosi esempi esplicativi.