Assessment of direct radiological risk and indirect associated toxic risks originated by Coal-Fired Power Plants

Over the past few decades there has been some discussion concerning the increase of the natural background radiation originated by coal-fired power plants, due to the uranium and thorium content present in combustion ashes. The radioactive decay products of uranium and thorium, such as radium, radon, polonium, bismuth and lead, are also released in addition to a significant amount of 40K. Since the measurement of radioactive elements released by the gaseous emissions of coal power plants is not compulsory, there is a gap of information concerning this situation. Consequently, the prediction of dispersion and mobility of these elements in the environment, after their release, is based on limited data and the radiological impact from the exposure to these radioactive elements is unknown. This paper describes the methodology that is being developed to assess the radiological impact due to the raise in the natural background radiation level originated by the release and dispersion of the emitted radionuclides. The current investigation is part of a research project that is undergoing in the vicinity of Sines coal-fired power plant (south of Portugal) until 2013. Data from preliminary stages are already available and possible of interpretation.

Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization

Materials selection is a matter of great importance to engineering design and software tools are valuable to inform decisions in the early stages of product development. However, when a set of alternative materials is available for the different parts a product is made of, the question of what optimal material mix to choose for a group of parts is not trivial. The engineer/designer therefore goes about this in a part-by-part procedure. Optimizing each part per se can lead to a global sub-optimal solution from the product point of view. An optimization procedure to deal with products with multiple parts, each with discrete design variables, and able to determine the optimal solution assuming different objectives is therefore needed. To solve this multiobjective optimization problem, a new routine based on Direct MultiSearch (DMS) algorithm is created. Results from the Pareto front can help the designer to align his/hers materials selection for a complete set of materials with product attribute objectives, depending on the relative importance of each objective.

On finite unions and finite products with the D-property

We show that the product of a subparacompact C-scattered space and a Lindelöf D-space is D. In addition, we show that every regular locally D-space which is the union of a finite collection of subparacompact spaces and metacompact spaces has the D-property. Also, we extend this result from the class of locally D-spaces to the wider class of D-scattered spaces. All the results are shown in a direct way.

IPH response to Department of Health (UK) Standardised Packaging of Tobacco Products

Enhanced tobacco control policies and programmes are an important component of any strategic approach to improving population health and tackling health inequalities. The consultation on standardised packaging of tobacco products in the UK is particularly timely in view of the recent publication of the Ten Year Tobacco Strategy for Northern Ireland (DHSSPS, 2012). In this strategy the Department expressed its support for the introduction of further measures to reduce the influence of tobacco advertising and promotion upon children e.g. the introduction of plain packaging for cigarettes and hand rolling tobacco.  IPH key points •    The extent of tobacco-related harm across the island of Ireland and across the UK is unacceptable. Increasingly comprehensive and effective tobacco-control interventions are required. •    IPH recommends the adoption of option 2: require standardised packaging of tobacco products. •    IPH acknowledges that as plain packaging has not yet been introduced in any country, it is not possible at this time to accurately forecast the extent and nature of this intervention on population level health outcomes in the UK context. •    The proposed approach appears comprehensive in addressing the direct and indirect ways in which elements of tobacco packaging can promote brand appeal and can portray impressions in respect of tobacco-related harm. Consideration should be given to include specific provisions relating to roll-your-own (RYO) tobacco packaging. Any approach needs to be regularly reviewed to take into account attempts to bypass restrictions and evaluate responses in respect of consumer choices. •    IPH considers that the introduction of plain packaging has the potential to support the achievement of the goals set out in the Ten Year Tobacco Control Strategy for Northern Ireland ( DHSSPS, 2012). •    Among children in Northern Ireland who reported trying their first cigarette, around one quarter were aged 11 or under and three quarters were 14 or under when they did so (DHSSPS, 2012).  The very young age of these children is concerning on many levels including their susceptibility to sophisticated branding and marketing techniques linked to tobacco packaging.

Chemical products : basic guide on labelling and safety data sheets

Hazardous chemical products have to comply with, amongst others, the provisions of a correct classification of danger, labelling and compilation of the safety data sheets. The aim is to protect people's health and the environment from exposure to hazardous chemicals- especially the health and safety of direct users, professionals or not, and the general public, via environmental exposure. This publication is intended to contribute to the knowledge of the objectives and basic aspects of these legal provisions, and thereby increase their degree of compliance in Andalusia and other european regions. This Guide is directed toward those people who, in the development of their professional activities, are in one way or another in contact with dangerous chemical products.

Chemical products : basic guide on labelling and safety data sheets

Hazardous chemical products have to comply with, amongst others, the provisions of a correct classification of danger, labelling and compilation of the safety data sheets. The aim is to protect people's health and the environment from exposure to hazardous chemicals- especially the health and safety of direct users, professionals or not, and the general public, via environmental exposure. This publication is intended to contribute to the knowledge of the objectives and basic aspects of these legal provisions, and thereby increase their degree of compliance in Andalusia and other european regions. This Guide is directed toward those people who, in the development of their professional activities, are in one way or another in contact with dangerous chemical products.

Direct and indirect subsidies in markets with system goods in the presence of externalities. Preliminary version

This paper derives a model of markets with system goods and two technological standards. An established standard incurs lower unit production costs but causes a negative externality. The paper derives the conditions for policy intervention and compares the effect of direct and indirect cost-reducing subsidies in two markets with system goods in the presence of externalities. If consumers are committed to the technology by purchasing one of the components, direct subsidies are preferable. For a medium-low cost difference between technological standards and a low externality cost it is optimal to provide a direct subsidy only to the first technology adopter. As the higher the externality cost raises, the more technology adopters should be provided with direct subsidies. This effect is robust in all extensions. In the absence of consumers commitment to a technological standard indirect and direct subsidies are both desirable. In this case, the subsidy to the first adopter is lower then the subsidy to the second adopter. Moreover, for the low cost difference between technological standards and low externality cost the fi rst fi rm chooses a superior standard without policy intervention. Finally, a perfect compatibility between components based on different technological standards enhances an advantage of indirect subsidies for medium-high externality cost and cost difference between technological standards. Journal of Economic Literature Classi fication Numbers: C72, D21, D40, H23, L13, L22, L51, O25, O33, O38. Keywords: Technological standards; complementary products; externalities; cost-reducing subsidies; compatibility.

Medicinal chemistry in the development of societies. Biodiversity and natural products

This document here has been elaborated by the IUPAC Medicinal Chemistry section and is backed by a large number of scientists, many of whom have had direct involvement and whose names appear at the end of the article. This work discusses the role that the discovery of new medicinal agents has in the development of societies as well as in the conservation of biodiversity in terms of the work carried out on natural products. Also included are several recommendations for countries which are presently in search of their own scientific and technological development in medicinal agents. The IUPAC Medicinal Chemistry section would appreciate the collaboration of the scientific societies in every country to aid in the diffusion of this document.

An easy and direct method for the synthesis of 1,2,4-triazole derivatives through carboxylic acids and hydrazinophthalazine

We have developed an easy method for the synthesis of thirteen compounds derived from 1,2,4-triazoles through a carboxylic acid and hydrazinophthalazine reaction, with a 75-85% yield mediated by the use of agents such as 1-ethyl-3-(3'-dimethylaminopropyl)-carbodiimide hydrochloride and 1-hydroxybenzotriazole. The operational simplicity of this method and the good yield of products make it valuable for the synthesis of new compounds with pharmacological activity.

Creating carbon footprint calculating tool for plastic packaging products

The environmental challenges of plastic packaging industry have increased remarkably along with climate change debate. The interest to study carbon footprints of packaging has increased in packaging industry to find out the real climate change impacts of packaging. In this thesis the greenhouse gas discharges of plastic packaging during their life cycle is examined. The carbon footprint is calculated for food packaging manufactured from plastic laminate. The structure of the laminate is low density polyethylene (PE-LD) and oriented polypropylene (OPP), which have been joined together with laminating adhesive. The purpose is to find out the possibilities to create a carbon footprint calculating tool for plastic packaging and its usability in a plastic packaging manufacturing company. As a carbon footprint calculating method PAS 2050 standard has been used. In the calculations direct and indirect greenhouse gas discharges as well as avoided discharges are considered. Avoided discharges are born for example in packaging waste utilization as energy. The results of the calculations have been used to create a simple calculating tool to be used for similar laminate structures. Although the utilization of the calculating tool is limited to one manufacturing plant because the primary activity data is dependent of geographical location and for example the discharges of used energy in the plant. The results give an approximation of the climate change potential caused by the laminate. It is although noticed that calculations do not include all environmental impacts of plastic packaging´s life cycle.

Cost evaluation process for competitors' products

A company’s capability to map out its cost position compared to other market players is important for competitive decision making. One aspect of cost position is direct product cost that illustrates the cost efficiency of a company’s product designs. If a company can evaluate and compare its own and other market players’ direct product costs, it can implement better decisions in product development and management, manufacturing, sourcing, etc. The main objective of this thesis was to develop a cost evaluation process for competitors’ products. This objective includes a process description and an analysis tool for cost evaluations. Additionally, process implementation is discussed as well. The main result of this thesis was a process description consisting of a sixteen steps process and an Excel based analysis tool. Since literature was quite limited in this field, the solution proposal was combined from many different theoretical concepts. It includes influences from reverse engineering, product cost assessment, benchmarking and cost based decision making. This solution proposal will lead to more systematic and standardized cost position analyses and result in better cost transparency in decision making.

Direct functionalization of heterocyclic and non-heterocyclic arenes

L’application des métaux de transition à la fonctionnalisation directe a ouvert la voie à une nouvelle classe de réactions pour la formation de liens carbone-carbone. De par l'omniprésence des liaisons C–H, l’introduction de nouvelles fonctionnalités chimiques par voie directe et pré-activation minimale s’impose comme une stratégie de synthèse très attrayante. Ainsi, il est envisageable de préparer de manière rapide et efficace des supports complexes menant à des molécules complexes, qui pourraient être utiles dans divers domaines de la chimie. L'objectif principal de la présente thèse vise la fonctionnalisation directe des arènes hétérocycliques et non hétérocycliques et, plus précisément, les techniques d’arylation. Dans un premier temps, nous allons aborder le thème de l’arylation directe tout en mettant l’accent sur les pyridines (Chapitre 1). Ces molécules sont à la base d'une multitude de composés biologiquement actifs et jouent un rôle important dans le domaine des sciences des matériaux, de l’agrochimie et de la synthèse des produits naturels. Dans un deuxième temps, nous discuterons de nos travaux sur l’arylation directe catalysé par un complex de palladium sur des ylures de N-iminopyridinium en soulignant la dérivatisation du sel de pyridinium après une phénylation sp2 (Chapitre 2). L’étude de ce procédé nous a permis de mettre en lumière plusieurs découvertes importantes, que nous expliquerons en détails une à une : l’arylation benzylique directe lorsque des ylures N-iminopyridinium substituées avec un groupement alkyl à la position 2 sont utilisés comme partenaires dans la réaction; les allylations Tsuji-Trost catalysée par un complex de palladium; et l’alkylation directe et sans métal via une catalyse par transfert de phase. Plusieurs défis restent à relever pour le développement de procédés directs utilisant des métaux de transition peu coûteux, d’autant plus que la synthèse par transformation directe des pyridines 2-alcényles, lesquelles sont pertinentes sur le plan pharmacologique, n’a pas encore été rapportée à ce jour. Avec cette problématique en tête, nous avons réussi à mettre au point une alcénylation directe catalysé par un complex de cuivre sur des ylures de N-iminopyridinium. Nous discuterons également d’une nouvelle méthode pour la préparation des iodures de vinyle utilisés dans les couplages. Ces réactions sont non seulement remarquablement chimiosélectives, mais sont aussi applicables à plusieurs substrats (Chapitre 3). En optimisant ce procédé direct, nous avons découvert une façon unique de synthétiser les pyrazolo[1,5-a]pyridines 2-substituées (Chapitre 4). Le mécanisme global met en jeu une séquence tandem de fonctionnalisation-cyclisation directe et un procédé direct en cascade, qui n’avais jamais été rapporté. Cela simplifie ansi la synthèse autrement compliquée de ces substrats en y apportant une solution à un problème de longue date. Dans les deux derniers chapitres, nous examinerons en détail les techniques d’arylation directe qui n'impliquent pas les partenaires de couplage hétérocycliques. Entre autres, au Chapitre 5, nous soulignerons notre découverte d’un umpolung dirigé et catalysé par un complexe de palladium du benzène et de quelques autres dérivés arènes. Il s’agit là du premier cas de fonctionnalisation directe dans laquelle le groupe directeur se trouve sur le partenaire halogène et il s’ajoute à la courte liste d’exemples connus dans la littérature rapportant une arylation directe du benzène. Finalement, au Chapitre 6, nous passerons en revue une nouvelle arylation directe catalysée au fer, qui se veut un procédé peu coûteux, durable et présentant une économie d’atomes. Nous discutons des substrats possibles ainsi des études mécanistiques réalisés.

Intramolecular Direct Functionalization of Cyclopropanes via Silver-Mediated, Palladium Catalysis

Au cours de la dernière décennie, le domaine de la fonctionnalisation directe des liens C–H a connu un intérêt croissant, en raison de la demande de processus chimiques moins dispendieux, plus efficaces et plus écologiques. . Les cyclopropanes représentent un motif structural souvent retrouvé dans des agents biologiquement actifs importants et dans des intermédiaires de synthèse permettant l'accès à des architectures complexes. Malgré leur valeur intrinsèque, la fonctionnalisation directe des cyclopropanes n’a pas été largement explorée. Ce mémoire traitera de deux méthodologies liées, mais tout aussi différentes, impliquant la fonctionnalisation directe des liens C–H cyclopropaniques impliquant des réactions intramoléculaires catalysées par un complex de palladium et assistées par l’argent. Le premier chapitre présentera d’abord un bref survol de la littérature sur les fondements de la fonctionnalisation directe ainsi que les contributions majeures réalisées dans ce domaine. L’accent sera notamment mis sur la fonctionnalisation des centres sp3 et sera souligné par des exemples pertinents. Les découvertes clés concernant le mécanisme et les cycles catalytiques de ces processus seront discutées. Le second chapitre décrira comment les 2-bromoanilides peuvent être utilisés pour accéder à des motifs particuliers de type spiro 3,3’ oxindoles cyclopropyliques. L'optimisation et l’étendue de la réaction seront abordés, suivis par des études mécanistiques réfutant l’hypothèse de la formation d’un intermédiaire palladium-énolate. Ces études mécanistiques comprennent une étude cinétique de l'effet isotopique ainsi que des études sur épimérisation; celles-ci ont confirmé que la réaction se produit par arylation directe. Sur la base des résultats obtenus dans le deuxième chapitre, nous aborderons ensuite la fonctionnalisation directe des benzamides cyclopropyliques lesquels, après une ouverture de cycle, donneront de nouveaux produits benzo [c] azépine-1-ones (chapitre trois). Après avoir présenté une brève optimisation et l’étendue de la réaction, nous discuterons des études mécanistiques impliquées à déduire l'ordre des événements dans le cycle catalytique et à déterminer le rôle des réactifs. Celles-ci permetteront de conclure que la fonctionnalisation de l’unité cyclopropyle se produit avant l’ouverture de cycle et que l'acétate est responsable de la déprotonation-métalation concertée. Le dernier chapitre (chapitre quatre) traitera en rétrospective de ce qui a été appris à partir de deux méthodologies divergentes et connexes et de comment ces résultats peuvent être exploités pour explorer d’autres types de fonctionnalisations directes sur des cyclopropanes.

Strongly distance-balanced graphs and graph products

A graph G is strongly distance-balanced if for every edge uv of G and every i 0 the number of vertices x with d.x; u/ D d.x; v/ 1 D i equals the number of vertices y with d.y; v/ D d.y; u/ 1 D i. It is proved that the strong product of graphs is strongly distance-balanced if and only if both factors are strongly distance-balanced. It is also proved that connected components of the direct product of two bipartite graphs are strongly distancebalanced if and only if both factors are strongly distance-balanced. Additionally, a new characterization of distance-balanced graphs and an algorithm of time complexity O.mn/ for their recognition, wheremis the number of edges and n the number of vertices of the graph in question, are given

The development of indigo reduction methods and pre-reduced indigo products

The continuing importance of blue denim maintains indigo as an important vat dye industrially. In this review, we examine the various methods that have been used in the past and are currently used to reduce and dissolve indigo for dyeing. We discuss recent insights into the bacterial fermentation technology, the advantages and disadvantages of the direct chemical methods that have predominated for the last century and potentially cleaner technologies of catalytic hydrogenation and electrochemistry, which are becoming increasingly important. With considerations of environmental impact high on the dyeing industry's agenda, we also discuss the developments that have led to the production of pre-reduced indigo.