Organizational responses to technological discontinuities: the case of the American College of Radiology (ACR)

A long history of organizational research has shown that organizations are affected significantly by changes in technology. Scholars have given particular attention to the effects of so-called disruptive or discontinuous technological changes. Studies have repeatedly shown that established, incumbent organizations tend to suffer deep performance declines (and even complete demise) in the face of such changes, and researchers have devoted much attention to identifying the organizational conditions and processes that are responsible for this persistent and widespread pattern of adaptation failure. This dissertation, which examines the response of the American College of Radiology (ACR) to the emergence of nuclear magnetic resonance imaging technology (NMR), aims to contribute to this well-established research tradition in three distinct and important ways. First, it focuses on a fundamentally different type of organization, a professional association, rather than the technology producers examined in most prior research. Although technologies are well known to be embedded in “communities” that include technology producers, suppliers, customers, governmental entities, professional societies, and other entities, most prior research has focused on the responses and ultimate fate of producers alone. Little if any research has explored the responses of professional organizations in particular. Second, the study employs a sophisticated process methodology that identifies the individual events that make up the organization’s response to technological change, as well as the overall sequence through which these events unfold. This process approach contrasts sharply with the variance models used in most previous studies and offers the promise of developing knowledge about how adaptation ultimately unfolds (or fails to). Finally, the project also contributes significantly through its exploration of an apparently successful case of adaptation to technological change. Though nuclear magnetic resonance imaging posed a serious threat to the ACR and its members, this threat appears to have been successfully managed and overcome. Although the unique nature of the organization and the technology under study place some important limits on the generalizablity of this research, its findings nonetheless provide some important basic insights about the process through which social organizations can successfully adapt to discontinuous technological changes. These insights, which may also be of substantial relevance to technology producer organizations, will also be elaborated.

Diversification and Species Boundaries of Rhinebothrium (Cestoda; Rhinebothriidea) in South American Freshwater Stingrays (Batoidea; Potamotrygonidae)

Background: Neotropical freshwater stingrays (Batoidea: Potamotrygonidae) host a diverse parasite fauna, including cestodes. Both cestodes and their stingray hosts are marine-derived, but the taxonomy of this host/parasite system is poorly understood. Methodology: Morphological and molecular (Cytochrome oxidase I) data were used to investigate diversity in freshwater lineages of the cestode genus Rhinebothrium Linton, 1890. Results were based on a phylogenetic hypothesis for 74 COI sequences and morphological analysis of over 400 specimens. Cestodes studied were obtained from 888 individual potamotrygonids, representing 14 recognized and 18 potentially undescribed species from most river systems of South America. Results: Morphological species boundaries were based mainly on microthrix characters observed with scanning electron microscopy, and were supported by COI data. Four species were recognized, including two redescribed (Rhinebothrium copianullum and R. paratrygoni), and two newly described (R. brooksi n. sp. and R. fulbrighti n. sp.). Rhinebothrium paranaensis Menoret & Ivanov, 2009 is considered a junior synonym of R. paratrygoni because the morphological features of the two species overlap substantially. The diagnosis of Rhinebothrium Linton, 1890 is emended to accommodate the presence of marginal longitudinal septa observed in R. copianullum and R. brooksi n. sp. Patterns of host specificity and distribution ranged from use of few host species in few river basins, to use of as many as eight host species in multiple river basins. Significance: The level of intra-specific morphological variation observed in features such as total length and number of proglottids is unparalleled among other elasmobranch cestodes. This is attributed to the large representation of host and biogeographical samples. It is unclear whether the intra-specific morphological variation observed is unique to this freshwater system. Nonetheless, caution is urged when using morphological discontinuities to delimit elasmobranch cestode species because the amount of variation encountered is highly dependent on sample size and/or biogeographical representation.

Spin gaps and spin-flip energies in density-functional theory

Energy gaps are crucial aspects of the electronic structure of finite and extended systems. Whereas much is known about how to define and calculate charge gaps in density-functional theory (DFT), and about the relation between these gaps and derivative discontinuities of the exchange-correlation functional, much less is known about spin gaps. In this paper we give density-functional definitions of spin-conserving gaps, spin-flip gaps and the spin stiffness in terms of many-body energies and in terms of single-particle (Kohn-Sham) energies. Our definitions are as analogous as possible to those commonly made in the charge case, but important differences between spin and charge gaps emerge already on the single-particle level because unlike the fundamental charge gap spin gaps involve excited-state energies. Kohn-Sham and many-body spin gaps are predicted to differ, and the difference is related to derivative discontinuities that are similar to, but distinct from, those usually considered in the case of charge gaps. Both ensemble DFT and time-dependent DFT (TDDFT) can be used to calculate these spin discontinuities from a suitable functional. We illustrate our findings by evaluating our definitions for the Lithium atom, for which we calculate spin gaps and spin discontinuities by making use of near-exact Kohn-Sham eigenvalues and, independently, from the single-pole approximation to TDDFT. The many-body corrections to the Kohn-Sham spin gaps are found to be negative, i.e., single-particle calculations tend to overestimate spin gaps while they underestimate charge gaps.

Evolutionary dynamics on rugged fitness landscapes: Exact dynamics and information theoretical aspects

The parallel mutation-selection evolutionary dynamics, in which mutation and replication are independent events, is solved exactly in the case that the Malthusian fitnesses associated to the genomes are described by the random energy model (REM) and by a ferromagnetic version of the REM. The solution method uses the mapping of the evolutionary dynamics into a quantum Ising chain in a transverse field and the Suzuki-Trotter formalism to calculate the transition probabilities between configurations at different times. We find that in the case of the REM landscape the dynamics can exhibit three distinct regimes: pure diffusion or stasis for short times, depending on the fitness of the initial configuration, and a spin-glass regime for large times. The dynamic transition between these dynamical regimes is marked by discontinuities in the mean-fitness as well as in the overlap with the initial reference sequence. The relaxation to equilibrium is described by an inverse time decay. In the ferromagnetic REM, we find in addition to these three regimes, a ferromagnetic regime where the overlap and the mean-fitness are frozen. In this case, the system relaxes to equilibrium in a finite time. The relevance of our results to information processing aspects of evolution is discussed.

Coordination dynamics and attentional costs of continuous and discontinuous bimanual circle drawing movements

It has been suggested that the temporal control of rhythmic unimianual movements is different between tasks requiring continuous (e.g., circle drawing) and discontinuous movements (e.g., finger tapping). Specifically, for continuous movements temporal regularities are ail emergent property, whereas for tasks that involve discontinuities timing is ail explicit part of the action goal. The present experiment further investigated the control of continuous and discontinuous movements by comparing the coordination dynamics and attentional demands of bimanual continuous circle drawing with bimanual intermittent circle drawing. The intermittent task required participants to insert a 400 ms pause between each cycle while circling. Using dual-task methodology, 15 right-handed participants performed the two circle drawing tasks, while vocally responding to randomly presented auditory probes. The circle drawing tasks were performed in symmetrical and asymmetrical coordination modes and at movement frequencies of 1 Hz and 1.7 Hz. Intermittent circle drawing exhibited superior spatial and temporal accuracy and stability than continuous circle drawing supporting the hypothesis that the two tasks have different underlying control processes. In terms of attentional cost, probe RT was significantly slower during the intermittent circle drawing task than the continuous circle drawing task across both coordination modes and movement frequencies. Of interest was the finding that in the intermittent circling task reaction time (RT) to probes presented during the pause between cycles did not differ from the RT to probes occurring during the circling movement. The differences in attentional demands between the intermittent and continuous circle drawing tasks may reflect the operation of explicit event timing and implicit emergent timing processes, respectively. (C) 2008 Elsevier B.V. All rights reserved.

2D evaluation of crack openings using smeared and embedded crack models

This work deals with the determination of crack openings in 2D reinforced concrete structures using the Finite Element Method with a smeared rotating crack model or an embedded crack model In the smeared crack model, the strong discontinuity associated with the crack is spread throughout the finite element As is well known, the continuity of the displacement field assumed for these models is incompatible with the actual discontinuity However, this type of model has been used extensively due to the relative computational simplicity it provides by treating cracks in a continuum framework, as well as the reportedly good predictions of reinforced concrete members` structural behavior On the other hand, by enriching the displacement field within each finite element crossed by the crack path, the embedded crack model is able to describe the effects of actual discontinuities (cracks) This paper presents a comparative study of the abilities of these 2D models in predicting the mechanical behavior of reinforced concrete structures Structural responses are compared with experimental results from the literature, including crack patterns, crack openings and rebar stresses predicted by both models

Simulated annealing with adaptive neighborhood: A case study in off-line robot path planning

Simulated annealing (SA) is an optimization technique that can process cost functions with degrees of nonlinearities, discontinuities and stochasticity. It can process arbitrary boundary conditions and constraints imposed on these cost functions. The SA technique is applied to the problem of robot path planning. Three situations are considered here: the path is represented as a polyline; as a Bezier curve; and as a spline interpolated curve. In the proposed SA algorithm, the sensitivity of each continuous parameter is evaluated at each iteration increasing the number of accepted solutions. The sensitivity of each parameter is associated to its probability distribution in the definition of the next candidate. (C) 2010 Elsevier Ltd. All rights reserved.

Morphological variation and reproductive incompatibility of three coconut-mite-associated populations of predatory mites identified as Neoseiulus paspalivorus (Acari: Phytoseiidae)

Predatory mites identified as Neoseiulus paspalivorus DeLeon (Phytoseiidae) have been considered as agents for classical biological control of the coconut mite, Aceria guerreronis Keifer (Eriophyidae), in Africa and elsewhere. Preliminary identification of geographically distinct populations as belonging to the same species (N. paspalivorus) was based on their morphological similarity. However, laboratory studies recently conducted have shown large differences in feeding behaviors and biological characteristics among individuals collected from three geographic origins: Brazil (South America), Benin and Ghana (West Africa). As morphologically similar specimens do not necessarily belong to the same species, we evaluated under laboratory conditions, reproductive compatibility between the specimens from three geographic locations to ascertain their conspecificity. Morphological measurements were also made to determine whether there is a means of discriminating between them. Inter-population crosses showed complete reproductive isolation between the three geographic populations, but interpopulation discontinuities in morphometric characters were absent. These results indicate that the tested specimens are distinct biological entities despite morphological similarity. Further molecular genetic studies are therefore proposed, including screening for endosymbionts and assessment of genetic differentiation, to determine the cause of reproductive incompatibility and to clarify the taxonomic relationship between those populations.

Analytical solution to the zero-inertia problem for surge flow phenomena in nonprismatic channels

Surge flow phenomena. e.g.. as a consequence of a dam failure or a flash flood, represent free boundary problems. ne extending computational domain together with the discontinuities involved renders their numerical solution a cumbersome procedure. This contribution proposes an analytical solution to the problem, It is based on the slightly modified zero-inertia (ZI) differential equations for nonprismatic channels and uses exclusively physical parameters. Employing the concept of a momentum-representative cross section of the moving water body together with a specific relationship for describing the cross sectional geometry leads, after considerable mathematical calculus. to the analytical solution. The hydrodynamic analytical model is free of numerical troubles, easy to run, computationally efficient. and fully satisfies the law of volume conservation. In a first test series, the hydrodynamic analytical ZI model compares very favorably with a full hydrodynamic numerical model in respect to published results of surge flow simulations in different types of prismatic channels. In order to extend these considerations to natural rivers, the accuracy of the analytical model in describing an irregular cross section is investigated and tested successfully. A sensitivity and error analysis reveals the important impact of the hydraulic radius on the velocity of the surge, and this underlines the importance of an adequate description of the topography, The new approach is finally applied to simulate a surge propagating down the irregularly shaped Isar Valley in the Bavarian Alps after a hypothetical dam failure. The straightforward and fully stable computation of the flood hydrograph along the Isar Valley clearly reflects the impact of the strongly varying topographic characteristics on the How phenomenon. Apart from treating surge flow phenomena as a whole, the analytical solution also offers a rigorous alternative to both (a) the approximate Whitham solution, for generating initial values, and (b) the rough volume balance techniques used to model the wave tip in numerical surge flow computations.

A semi-analytical solution for vibration of rectangular plates with abrupt thickness variation

A semi-analytical analysis of free vibration of plates with cross-sectional discontinuities due to abrupt changes in thickness is presented. A basic square element divided into suitable subdomains dependent upon the positions of these abrupt changes is used as the basic building element, Admissible functions that satisfy the essential or geometric boundary conditions are used to define the transverse deflection of each subdomain. Continuities in the displacement, slope, moment and higher derivatives between adjacent subdomains are enforced at the interconnecting edges. The resulting global energy functional from the proper assembly of the coupled strain and kinetic energy contributions of each subdomain is then minimized via the Ritz procedure to extract the frequencies and mode shapes. Contour plots of a range of new mode shapes are presented for the enhancement of understanding the dynamic behavior of this class of plates, (C) 2001 Elsevier Science Ltd, All rights reserved.

High-frequency climatic oscillations recorded in a Holocene coral reef at Leizhou Peninsula, South China sea

A detailed study of the Goniopora reef profile at Dengloujiao, Xuwen County, Leizhou Peninsula, the northern coast of the South China Sea suggests that a series of high-frequency, large-amplitude and abrupt cold events occurred during the Holocene Hypsithermal, an unusual phenomenon termed Leizhou Events in this paper. This period (corresponding to C-14 age of 6.2 -6.7 kaBP or calendar age of 6.7-7.2 kaBP), when the climatic conditions were ideal for coral. reefs to develop, can be divided into at least nine stages. Each stage (or called a climate optimum), lasting about 20 to 50 a, was terminated by an abrupt cold nap and (or) a sea-level lowering event in winter, leading to widespread emergence and death of the Goniopora corals, and growth discontinuities on the coral surface. Such a cyclic process resulted in the creation of a > 4m thick Goniopora reef flat. During this period, the crust subsided periodically but the sea level was rising. The reef profile provides valuable archives for the study of decadal-scale mid-Holocene climatic oscillations in the tropical area of South China. Our results provide new evidence for high-frequency climate instability in the Holocene Hypsithermal, and challenge the traditional understanding of Holocene climate.

Rock fracture mean trace length estimation and confidence interval calculation using maximum likelihood methods

There has been a resurgence of interest in the mean trace length estimator of Pahl for window sampling of traces. The estimator has been dealt with by Mauldon and Zhang and Einstein in recent publications. The estimator is a very useful one in that it is non-parametric. However, despite some discussion regarding the statistical distribution of the estimator, none of the recent works or the original work by Pahl provide a rigorous basis for the determination a confidence interval for the estimator or a confidence region for the estimator and the corresponding estimator of trace spatial intensity in the sampling window. This paper shows, by consideration of a simplified version of the problem but without loss of generality, that the estimator is in fact the maximum likelihood estimator (MLE) and that it can be considered essentially unbiased. As the MLE, it possesses the least variance of all estimators and confidence intervals or regions should therefore be available through application of classical ML theory. It is shown that valid confidence intervals can in fact be determined. The results of the work and the calculations of the confidence intervals are illustrated by example. (C) 2003 Elsevier Science Ltd. All rights reserved.

Forma????o de carreiras para a gest??o p??blica contempor??nea: o caso dos especialistas em pol??ticas p??blicas e gest??o governamental

O artigo analisa o curso de forma????o inicial para a carreira de Especialista em Pol??ticas P??blicas e Gest??o Governamental (EPPGG), recentemente reformulado. Conclui-se que as mudan??as realizadas no curso, tendo em vista os problemas enfrentados em edi????es anteriores, os desafios contempor??neos da administra????o p??blica, a crescente complexidade dos problemas e as demandas da sociedade, proporcionaram respostas bastante adequadas. No entanto, persistem in??meros desafios, dentre os quais se destacam o aprimoramento do ensino de aplica????o e novas tecnologias. Ao longo das nove edi????es do curso, percebe-se que os principais objetivos do projeto inicial da carreira permaneceram, mesmo com todas as descontinuidades administrativas. Preservaram-se o perfil generalista e as policompet??ncias na forma????o do EPPGG, a fim de permitir ao profissional uma vis??o abrangente e integrada dos complexos problemas da administra????o p??blica e desenvolver a capacidade de analisar, decidir e buscar os melhores resultados em prol do cidad??o, conduzindo as rela????es e as atividades profissionais de acordo com os princ??pios da ??tica p??blica.

A política do ensino médio integrado no Espírito Santo e a experiência de sua implantação na Escola Estadual de Ensino Médio Arnulpho Mattos

Esta dissertação teve como objeto o Ensino Médio Integrado no Espírito Santo, sua trajetória e implantação a partir do Decreto 5.154/2004. O objetivo principal foi analisar a política do ensino médio integrado à educação profissional técnica de nível médio implementada no Espírito Santo. Investigar a educação pública pressupõe contextualizar a sociedade e as construções sociais que se projetam. O ensino médio no Brasil, enquanto etapa intermediária entre o ensino fundamental e a educação superior constitui-se de grande complexidade na estruturação de políticas públicas, no que tange à sua expansão qualitativa e quantitativa. Foram estabelecidos os seguintes objetivos específicos: identificar os pressupostos teóricos e pedagógicos contidos na Proposta Pedagógica da unidade escolar EEEFM Arnulpho Mattos; analisar a matriz curricular e a proposta pedagógica; relacionar o projeto pedagógico do curso com a prática educacional relatada nos encontros com os alunos; analisar a organização escolar e sua gestão política e pedagógica em face da proposta do EMI; relacionar a proposta do EMI, o princípio da politecnia e os relatos dos alunos; mapear a oferta do EMI no estado e o seu investimento financeiro. Nesse cenário, identificamos a relação entre trabalho e educação que contextualiza a relação da escola com a sociedade no sistema capitalista, em especial no ensino médio. Assim, nossa hipótese foi que esta política tem dificuldades de alcançar seus objetivos porque sua estrutura material segue a lógica da escola capitalista, assentada na perspectiva da Teoria do Capital Humano. A formação profissional no ensino médio é uma demanda social e histórica da classe trabalhadora, que necessita ingressar mais rápido no mercado de trabalho do que os filhos das elites brasileiras. A metodologia empregada foi uma pesquisa do tipo qualitativa, sendo um estudo de caso da EEEF Arnulpho Mattos. Os procedimentos metodológicos adotados para a investigação foram: observação, entrevistas semi-estruturadas, a análise documental, a revisão bibliográfica e os princípios metodológicos inscritos na sociologia da experiência (DUBET, 1994). Na articulação desses procedimentos, verificamos que a política do ensino médio integrado no ES teve, em seu início, um planejamento de implantação bem estruturado mas interrompido e, posteriormente, caracterizou-se pela descontinuidade das ações. Ademais, constatamos que os alunos ingressam e permanecem no curso sem compreenderem de fato o que significa a formação integrada entre a área geral e a técnica/profissional. Nos grupos de discussão percebemos que bastaram alguns encontros para que se pudesse estabelecer uma visão e relação diferenciadas com a experiência social do ensino médio integrado, principalmente por serem alunos trabalhadores. Acrescentamos às nossas conclusões que há iniciativas da escola acerca da integração entre as disciplinas de formação geral e técnicas, mas sem apoio ou orientação da unidade gestora, ou seja, a Sedu. A ampliação da oferta do EMI ocorreu no estado sem investimento na formação e valorização dos professores, sem concurso público e sem uma infra-estrutura necessária para a formação de jovens e adultos com capacidade de entender e de interferir no mundo do trabalho.