Fuzzy Control System for Voltage Regulation In Power Transformers

A fuzzy control strategy for voltage regulation in electric power distribution systems is introduced in this article. This real-time controller would act on power transformers equipped with under-load tap changers. The fuzzy system was employed to turn the voltage-control relays into adaptive devices. The scope of the present study has been limited to the power distribution substation, and both the voltage measurements and control actions are carried out on the secondary bus. The capacity of fuzzy systems to handle approximate data, together with their unique ability to interpret qualitative information, make it possible to design voltage control strategies that satisfy both the requirements of the Brazilian regulatory bodies and the real concerns of the electric power distribution companies. A prototype based on the fuzzy control strategy proposed in this paper has also been implemented for validation purposes and its experimental results were highly satisfactory.

Fuzzy computational control for real Chua circuit

We preserit a computational procedure to control art experimental chaotic system by applying the occasional proportional feedback (OPF) method. The method implementation uses the fuzzy theory to relate the variable correction to the necessary adjustment in the control parameter. As an application We control the chaotic attractors of the Chua circuit. We present file developed circuits and algorithms to implement this control in real time. To simplify the used procedure, we use it low resolution analog to digital converter compensated for a lowpass filter that facilitates similar applications to control other systems. (C) 2007 Elsevier Ltd. All rights reserved.

Galerkin Method and Weighting Functions Applied to Nonlinear H(infinity) Control with Output Feedback

This paper considers two aspects of the nonlinear H(infinity) control problem: the use of weighting functions for performance and robustness improvement, as in the linear case, and the development of a successive Galerkin approximation method for the solution of the Hamilton-Jacobi-Isaacs equation that arises in the output-feedback case. Design of nonlinear H(infinity) controllers obtained by the well-established Taylor approximation and by the proposed Galerkin approximation method applied to a magnetic levitation system are presented for comparison purposes.

Flatness-based control of a single qubit gate

This work considers the open-loop control problem of steering a two-level quantum system from any initial to any final condition. The model of this system evolves on the state space X = SU(2), having two inputs that correspond to the complex amplitude of a resonant laser field. A symmetry preserving flat output is constructed using a fully geometric construction and quaternion computations. Simulation results of this flatness-based open-loop control are provided.

Adaptable control for electrical generation at irregural wind speeds

The main aims of this work are the development and the validation of one generic algorithm to provide the optimal control of small power wind generators. That means up to 40 kW and blades with fixed pitch angle. This algorithm allows the development of controllers to fetch the wind generators at the desired operational point in variable operating conditions. The problems posed by the variable wind intensity are solved using the proposed algorithm. This is done with no explicit measure of the wind velocity, and so no special equipment or anemometer is required to compute or measure the wind velocity.

Optimal intelligent supervisory control system in cyber-physical intelligence

This paper studies Optimal Intelligent Supervisory Control System (OISCS) model for the design of control systems which can work in the presence of cyber-physical elements with privacy protection. The development of such architecture has the possibility of providing new ways of integrated control into systems where large amounts of fast computation are not easily available, either due to limitations on power, physical size or choice of computing elements.

Remote and mobile experimentation: pushing the boundaries of an ubiquitous learning place

Concepts like E-learning and M-learning are changing the traditional learning place. No longer restricted to well-defined physical places, education on Automation and other Engineering areas is entering the so-called ubiquitous learning place, where even the more practical knowledge (acquired at lab classes) is now moving into, due to emergent concepts such as Remote Experimentation or Mobile Experimentation. While Remote Experimentation is traditionally regarded as the remote access to real-world experiments through a simple web browser running on a PC connected to the Internet, Mobile Experimentation may be seen as the access to those same (or others) experiments, through mobile devices, used in M-learning contexts. These two distinct client types (PCs versus mobile devices) pose specific requirements for the remote lab infrastructure, namely the ability to tune the experiment interface according to the characteristics (e.g. display size) of the accessing device. This paper addresses those requirements, namely by proposing a new architecture for the remote lab infrastructure able to accommodate both Remote and Mobile Experimentation scenarios.

Limit Cycle Prediction of Systems with Fractional Controllers and Backlash

This article investigates the limit cycle (LC) prediction of systems with backlash by means of the describing function (DF) when using discrete fractional-order (FO) algorithms. The DF is an approximate method that gives good estimates of LCs. The implementation of FO controllers requires the use of rational approximations, but such realizations produce distinct dynamic types of behavior. This study analyzes the accuracy in the prediction of LCs, namely their amplitude and frequency, when using several different algorithms. To illustrate this problem we use FO-PID algorithms in the control of systems with backlash.

An automated maneuver control framework for a remotely operated vehicle

OCEANS, 2001. MTS/IEEE Conference and Exhibition (Volume:2 )

A systems biology framework for pathway level culture media engineering: pplication to Pichia pastoris cultures

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Automatització integral d'un habitatge

En aquest projecte discutirem i aprovarem la viabilitat d'implementar una automatització integral d'un habitatge utilitzant les tecnologies domòtiques existents a l'actualitat. La idea inicial és substituir tots els elements que integren la construcció (il·luminació, climatització, parts mòbils,...) per dispositius domòtics i implementar un software de visualització sobre aparells mòbils (smartphones, tablets) que ens permeti un control total sobre l'habitacle. S’avaluarà quina és la solució de mercat que millor s’adapta al projecte i s’implementarà integrant-la posteriorment als sistemes de visualització i control.

Implementació d'un sistema per al control de la qualitat d'imatges JPEG (III)

Aquest TFC vol desenvolupar una aplicació gràfica per a treballar amb imatges i convertir-les al format JPEG.

Editor interactivo de policubos

Hoy en día existen numerosas técnicas para aplicar texturas sobre objetos 3D genéricos, pero los mecanismos para su creación son, en general, o bien complejos y poco intuitivos para el artista, o bien poco eficientes en aspectos como obtener un texturado global sin costuras. Recientemente, la invención de los policubos ha abierto un nuevo espectro de posibilidades a la hora de realizar estas tareas, e incluso otras como animación y subdivisión, de crucial importancia para industrias como el cine o los videojuegos. Desafortunadamente, no existen herramientas automáticas y editables que permitan generar el modelo de policubos base. Un policubo es una agregación de cubos idénticos de forma que cada cubo tiene como mínimo en común una cara con otro cubo. Con la agrupación de estos cubos se pueden generar diferentes figuras espaciales. El objetivo es desarrollar una herramienta para la creación y edición interactiva de un modelo de policubos a partir de un objeto tridimensional, la cual proporcionara una libertad y control al usuario no existente en las herramientas actualmente disponibles

Multivalent display of the antimicrobial peptides BP100 and BP143

Carbohydrates are considered as promising templates for the display of multiple copies of antimicrobial peptides. Herein, wedescribe the design and synthesis of chimeric structures containing two or four copies of the antimicrobial peptidesKKLFKKILKYL-NH2 (BP100) and KKLfKKILKYL-NH2 (BP143) attached to the carbohydrate template cyclodithioerythritol(cDTE) or α-D-galactopyranoside (Galp). The synthesis involved the preparation of the corresponding peptide aldehyde followedby coupling to an aminooxy-functionalized carbohydrate template. After purification, the multivalent display systems were obtainedin high purities (90–98%) and in good yields (42–64%). These compounds were tested against plant and human pathogenic bacteriaand screened for their cytotoxicity on eukaryotic cells. They showed lower MIC values than the parent peptides against the bacteriaanalyzed. In particular, the carbopeptides derived from cDTE and Galp, which contained two or four copies of BP100, respectively,were 2- to 8-fold more active than the monomeric peptide against the phytopathogenic bacteria. These results suggest thatpreassembling antimicrobial peptides to multimeric structures is not always associated with a significant improvement of theactivity. In contrast, the carbopeptides synthesized were active against human red blood cells pointing out that peptide preassemblyis critical for the hemolytic activity. Notably, peptide preassembly resulted in an enhanced bactericidal effect