Transferência de Salmonella Enteritidis por contaminação cruzada e formação de biofilme em diferentes superfícies de corte

Pós-graduação em Biologia Geral e Aplicada - IBB

Campylobacter sp como perigo biológico na produção de peito de frango maturado

Pós-graduação em Microbiologia Agropecuária - FCAV

Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

Essential oils from herbs against foodborne pathogens in chicken sausage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hurdles at work: perceptions of hospital food handlers

Abstract Background Food handlers have a very important role in preventing food contamination during its preparation and distribution. This responsibility is even greater in hospitals, since a large number of patients have low immunity and consequently food contamination by pathogenic bacteria could be particularly harmful. Therefore, a good working environment and periodic training should be provided to food handlers by upper management. Methods This study is qualitative research by means of focus group and thematic content analysis methodologies to examine, in detail, the statements by food handlers working in the milk and specific-diet kitchens in a hospital to understand the problems they face in the workplace. Results We found that food handlers are aware of the role they play in restoring patients' health; they consider it important to offer a good-quality diet. However, according to their perceptions, a number of difficulties prevent them from reaching this aim. These include: upper management not prioritizing human and material resources to the dietetic services when making resource allocation decisions; a perception that upper management considers their work to be of lesser importance; delayed overtime payments; lack of periodic training; managers lacking administrative skills; insufficient dietitian staff assistants, leading to overwork, at the same time as there is an excess of dietitians; unhealthy environmental working conditions – high temperature, high humidity, loud and constant noise level, poor ventilation; lack of food, and kitchen utensils and equipment; and relationship conflicts with chief dieticians and co-workers. Conclusion From these findings, improvement in staff motivation could be achieved by considering non-financial incentives, such as improvement in working conditions and showing appreciation and respect through supervision, training and performance appraisal. Management action, such as investments in intermediary management so that managers have the capacity to provide supportive supervision, as well as better use of performance appraisal and access to training, may help overcome the identified problems.

Low prevalence of SV40 in Swiss mesothelioma patients after elimination of false-positive PCR results

The association of simian virus 40 (SV40) with malignant pleural mesothelioma is currently under debate. In some malignancies of viral aetiology, viral DNA can be detected in the patients' serum or plasma. To characterize the prevalence of SV40 in Swiss mesothelioma patients, we optimized a real-time PCR for quantitative detection of SV40 DNA in plasma, and used a monoclonal antibody for immunohistochemical detection of SV40 in mesothelioma tissue microarrays. Real-time PCR was linear over five orders of magnitude, and sensitive to a single gene copy. Repeat PCR determinations showed excellent reproducibility. However, SV40 status varied for independent DNA isolates of single samples. We noted that SV40 detection rates by PCR were drastically reduced by the implementation of strict room compartmentalization and decontamination procedures. Therefore, we systematically addressed common sources of contamination and found no cross-reactivity with DNA of other polyomaviruses. Contamination during PCR was rare and plasmid contamination was infrequent. SV40 DNA was reproducibly detected in only 4 of 78 (5.1%) plasma samples. SV40 DNA levels were low and not consistently observed in paired plasma and tumour samples from the same patient. Immunohistochemical analysis revealed a weak but reproducible SV40 staining in 16 of 341 (4.7%) mesotheliomas. Our data support the occurrence of non-reproducible SV40 PCR amplifications and underscore the importance of proper sample handling and analysis. SV40 DNA and protein were found at low prevalence (5%) in plasma and tumour tissue, respectively. This suggests that SV40 does not appear to play a major role in the development of mesothelioma.

Geochemistry on the Kekesai composite intrusion

The late Carboniferous to Permian is a critical period for final amalgamation of the Central Asian Orogenic Belt (CAOB), which is characterized by voluminous igneous rocks, particularly granitoids. The Kekesai composite granitoid porphyry intrusion, situated in the Chinese western Tianshan (southwest part of CAOB) includes two intrusive phases, a monzogranite phase, intruded by a granodiorite phase. LA-ICPMS U-Pb zircon analyses suggest that the monzogranitic rocks formed at 305.5±1.1 Ma, with a wide age range of inherited zircons (358-488 Ma and 1208-1391 Ma), whereas the granodioritic rocks formed at 288.7±1.5 Ma. The monzogranitic and granodioritic phases have similar geochemical features and Sr-Nd-Hf isotopic compositions. They exhibit high and variable SiO2 (66-71 wt.%) and MgO (0.41-2.14 wt.%) contents with some arc-like geochemical characteristics (e.g., enrichment of large ion lithophile elements and negative anomalies of Nb, Ta and Ti) and relatively high initial 87Sr/86Sr ratios (ISr=0.7055-0.7059), low positive eNd(t) (+0.84 to +1.03) as well as a large variation in Hf isotopic compositions with eHf(t) between +3.43 to +14.8, implying both of them were derived from similar source materials. These geochemical characteristics suggest that they might be mainly derived from the partial melting of arc-derived Mesoproterozoic mafic lower crust with involvement of a mantle-derived component in variable proportions by mantle-derived magma underplating. The presence of late-Ordovician to earliest early Carboniferous inherited zircons and the Hf isotopic compositions in the monzogranitic sample, similar to that of the widespread juvenile arc rocks, indicates some crust contamination during magma emplacement. Our new data, combined with previous studies, imply that extensive post-collisional magmatism due to underplating of mantle-derived magma, could plausibly be explained by slab break-off regime.

Zircon U-Pb and Hf-O analysis of porphyries from the Duolong porphyry Cu-Au deposit in the Bangongco copper belt, central Tibet

The Duolong porphyry Cu-Au deposit (5.4 Mt at 0.72% Cu, 41 t at 0.23 g/t Au), which is related to the granodiorite porphyry and the quartz-diorite porphyry from the Bangongco copper belt in central Tibet, formed in a continental arc setting. Here, we present the zircon U-Pb ages, geochemical whole-rock, Sr-Nd whole-rock and zircon in-situ Hf-O isotopic data for the Duolong porphyries. Secondary ion mass spectrometry (SIMS) zircon U-Pb analyses for six samples yielded consistent ages of ~118 Ma, indicating a Cretaceous formation age. The Duolong porphyries (SiO2 of 58.81-68.81 wt.%, K2O of 2.90-5.17 wt.%) belong to the high-K calc-alkaline series. They show light rare earth element (LREE)-enriched distribution patterns with (La/Yb)N = 6.1-11.7, enrichment in large ion lithophile elements (e.g., Cs, Rb, and Ba) and depletion of high field strength elements (e.g., Nb), with negative Ti anomalies. All zircons from the Duolong porphyries share relatively similar Hf-O isotopic compositions (d18O=5.88-7.27 per mil; eHf(t)=3.6-7.3), indicating that they crystallized from a series of cogenetic melts with various degrees of fractional crystallization. This, along with the general absence of older inherited zircons, rules out significant crustal contamination during zircon growth. The zircons are mostly enriched in d18O relative to mantle values, indicating the involvement of an 18O-enriched crustal source in the generation of the Duolong porphyries. Together with the presence of syn-mineralization basaltic andesite, the mixing between silicic melts derived from the lower crust and evolved H2O-rich mafic melts derived from the metsomatizied mantle wedge, followed by subsequent fractional crystallization (FC) and minor crustal contamination in the shallow crust, could well explain the petrogenesis of the Duolong porphyries. Significantly, the hybrid melts possibly inherited the arc magma characteristics of abundant F, Cl, Cu, and Au elements and high oxidation state, which contributed to the formation of the Duolong porphyry Cu-Au deposit.

Precipitated iron: a limit on gettering efficacy in multicrystalline silicon

A phosphorus diffusion gettering model is used to examine the efficacy of a standard gettering process on interstitial and precipitated iron in multicrystalline silicon. The model predicts a large concentration of precipitated iron remaining after standard gettering for most as-grown iron distributions. Although changes in the precipitated iron distribution are predicted to be small, the simulated post-processing interstitial iron concentration is predicted to depend strongly on the as-grown distribution of precipitates, indicating that precipitates must be considered as internal sources of contamination during processing. To inform and validate the model, the iron distributions before and after a standard phosphorus diffusion step are studied in samples from the bottom, middle, and top of an intentionally Fe-contaminated laboratory ingot. A census of iron-silicide precipitates taken by synchrotron-based X-ray fluorescence microscopy confirms the presence of a high density of iron-silicide precipitates both before and after phosphorus diffusion. A comparable precipitated iron distribution was measured in a sister wafer after hydrogenation during a firing step. The similar distributions of precipitated iron seen after each step in the solar cell process confirm that the effect of standard gettering on precipitated iron is strongly limited as predicted by simulation. Good agreement between the experimental and simulated data supports the hypothesis that gettering kinetics is governed by not only the total iron concentration but also by the distribution of precipitated iron. Finally, future directions based on the modeling are suggested for the improvement of effective minority carrier lifetime in multicrystalline silicon solar cells.

Vegetais minimamente processados prontos para o consumo: influência da etapa de desinfecção na inativação de Salmonella Typhimurium, na ocorrência da contaminação cruzada e na avaliação quantitativa de risco microbiológico em relação a este patógeno

Dados mundiais apontam haver uma associação entre o aumento do comércio de vegetais minimamente processados prontos para o consumo (VPC) e o aumento da ocorrência de surtos de enfermidades transmitidas por alimentos. Durante o processamento industrial de VPC, a desinfecção é a principal etapa de inativação de micro-organismos patogênicos presentes, mas nessa etapa também pode ocorrer contaminação cruzada, com transferência de contaminantes de produtos contaminados para não-contaminados. Neste trabalho, foram coletadas informações sobre as práticas empregadas na etapa de desinfecção em dez importantes indústrias produtoras de VPC no Estado de São Paulo, avaliando-se, em seguida, a influência dessas práticas na qualidade microbiológica dos produtos e na inativação de Salmonella Typhimurium, bem como na ocorrência de contaminação cruzada por este patógeno. Um modelo de avaliação quantitativa de risco microbiológico foi elaborado para estimar o impacto da contaminação cruzada durante a etapa de desinfecção no risco de infecção por Salmonella devido ao consumo de VPC. Observou-se que, em todas as indústrias visitadas, a desinfecção dos vegetais era feita com produtos à base de cloro em concentrações de 50 a 240 mg/L, que resultava em redução de até 1,2 log na carga microbiana dos vegetais que entravam na linha de processamento. Ao avaliar a influência das características da água de processamento (pH, temperatura, concentração de matéria orgânica e concentração de dicloroisocianurato de sódio) e do tempo de contato entre a água clorada e os vegetais na redução de Salmonella, observou-se que a concentração do produto à base de cloro foi o parâmetro que apresentou maior influência (p<0.05). Concentrações de dicloroisocianurato de sódio acima de 10 mg/L foram necessárias para controle da contaminação cruzada durante a etapa de lavagem. O modelo de avaliação de risco construído indicou quantitativamente haver uma relação entre a concentração de dicloroisocianurato de sódio na água de desinfecção e o risco de ocorrência de surtos causados por Salmonella em VPC. Cenários simulando uso de dicloroisocianurato de sódio em concentrações abaixo de 5 mg/L indicaram que mais de 96% dos casos preditos de infecção por Salmonella poderiam ser atribuídos à ocorrência de contaminação cruzada, enquanto que em cenários com concentrações acima de 50 mg/L, casos de infecção devidos à contaminação cruzada não foram preditos. Estes resultados mostram que o controle da qualidade da água e o monitoramento da concentração de sanitizante na etapa de desinfecção são essenciais para evitar a ocorrência de contaminação cruzada e garantir a produção de VPC seguros para o consumo.

Experimental validation of the regulated expression of large numbers of non-coding RNAs from the mouse genome

Recent large-scale analyses of mainly full-length cDNA libraries generated from a variety of mouse tissues indicated that almost half of all representative cloned sequences did flat contain ail apparent protein-coding sequence, and were putatively derived from non-protein-coding RNA (ncRNA) genes. However, many of these clones were singletons and the majority were unspliced, raising the possibility that they may be derived from genomic DNA or unprocessed pre-rnRNA contamination during library construction, or alternatively represent nonspecific transcriptional noise. Here we Show, using reverse transcriptase-dependent PCR, microarray, and Northern blot analyses, that many of these clones were derived from genuine transcripts Of unknown function whose expression appears to be regulated. The ncRNA transcripts have larger exons and fewer introns than protein-coding transcripts. Analysis of the genomic landscape around these sequences indicates that some cDNA clones were produced not from terminal poly(A) tracts but internal priming sites within longer transcripts, only a minority of which is encompassed by known genes. A significant proportion of these transcripts exhibit tissue-specific expression patterns, as well as dynamic changes in their expression in macrophages following lipopolysaccharide Stimulation. Taken together, the data provide strong support for the conclusion that ncRNAs are an important, regulated component of the mammalian transcriptome.

(Table 2, Page 275) Elemental concentrations in manganese nodules used in seawater contact experiments

The gross changes in concentrations of several trace elements in seawater after contact with ferro-manganese particle suspensions has been determined. Cobalt, Fe, and Zn concentrations in the seawater were greatly increased after contact with the par¬ticles. The concentrations of Rb, U, Cs, Sb, and Ag were altered to a lesser degree by this treatment. Similar results were observed where seawater was con¬tacted with suspensions of pelagic sediments. Of the trace elements measured, cobalt and iron appear to be the best elemental indicators of the presence of manganese mining effluents in the ocean. The addi¬tions of the essential elements Co, Fe and Zn toge¬ther with nutrients from the bottom waters may pro¬duce increased biological productivity. However, the toxic trace metals, such as Hg, Cu and Cd which could enter ocean water from the nodules and sedi¬ment and which may be high in effluent-affected areas should be investigated before conclusions as to the likely impact can be reached. Trace element analysis of seawater samples collected at a Pacific Ocean manganese nodule dredging site showed high t race element concentrations, but these are believed to have resulted from contamination during sample collection or storage rather than from the dredging operations.

Germinação de sementes e otimização de técnicas de micropropagação de umbuzeiro (spondias tuberosa, arr.) anacardiaceae

The brazilian-plum (Spondias tuberosa, His) is a tropical fruit tree that has been consolidated in the market for agribusiness processing, due to its characteristic flavor of fruit. Accordingly, studies to optimize the propagation of plants are necessary for production of seedlings with agronomic and quality assurance measures. This study aimed at determining the efficient techniques for uniform seed germination, as brazilian-plum seed present mechanical dormancy, and establish optimal culture media for multiplication of shoots from the in vitro micropropagation. Firstly, in a greenhouse at the Universidade Federal do Rio Grande do Norte, was evaluated the influence of different methods of breaking dormancy in the emergence of seedlings of brazilian-plum and speed of germination (IVG) of seeds. After 60 days of cultivation, it was found that splay in the distal portion of the seed was the best treatment, with rates of 85.33% in germinability and 3.415 of IVG, compared with the treatment of seed-soaking in water for 12h + humus and the control group. Subsequently, new sources of seedling explants were obtained in studies of tissue culture. Laboratory of Plant Biotechnology that the university, was used stem apex, nodal segments and internodes in search of decontamination with various concentrations of calcium hypochlorite [Ca(OCl)2] and micropropagation, inoculating them in half WPM (1980) with various concentrations of 6-benzylaminopurine (BAP). We used 10 sample units with three replications for different concentrations of [Ca(OCl)2], BAP and explants type. After thirty days, which was observed for the control of contamination, during the establishment in vitro, concentrations of [Ca(OCl)2] between 0.5% and 2.0% were effective in combating exogenous contamination of the apex. In nodal segments and internodes, concentrations of [Ca(OCl)2] between 1.0% and 2.0% and 1.5% and 2.0% were respectively, sufficient to reduce the percentage of losses in these infestations explants. For micropropagation, the culture medium supplemented with 0.1 mg.L-1 BAP promotes better development of multiple shoots per explants from nodal segment. However, success does not get to shoot training in internodal segment