Red-shift conical emission by femtosecond pulses at low input power

Red-shift conical emission (CE) is observed by femtosecond laser pulse propagating in BK7 at a low input power (compared to those input powers for generation of blue-shift CE). With the increasing input power the blue-shift CE begins to appear whereas the red-shift CE ring (902 nm in our experiment) disappears accompanied by the augment of the central white spot size synchronously. The disappearing of red-shift CE in our experiment is explained such that the increase of axial intensity is much higher than that of ring emission and the augment of the central white spot size with the increasing input laser power.

On the Distribution and Fishery Potential of the Japanese Red Crab Chaceon granulatus in the Palauan Archipelago, Western Caroline Islands

A deep-water trapping survey in the Palauan archipelago, Western Caroline Islands, has revealed an abundance of the Japanese red crab, Chaceon granulatus. The recorded depth range (250-900 m) is similar to that of other geryonids, but the large numbers of females caught below 700 m is atypical. Mean yields in excess of 5 kg crabs plus 1 kg shrimp, Heterocarpus laevigatus, by-catch per trap-night were attainable at optimum depths. Chaceon granulatus is apparently a very large geryonid, with maximum weights of 2.02 kg and 1.51 kg recorded for male and female specimens, respectively. A range of body colors was observed: Orange-red shades appear to dominate the deeper waters (below 500 m) while yellow-tan colors are more abundant in the upper reaches. Preliminary evidence suggests that Chaceon granulatus is highly marketable, and the infrastructure in Palau is such that crabs could either be marketed fresh locally or airfreighted to Japan as a quick-frozen product. The high post-trapping survival rates observed indicate that maintaining crabs in live-holding tanks may be a feasible option. The large catches and quality of deep-water crabs taken suggests that the Palauan population of Chaceon granulatus may be able to support a small-scale fishery. It is not yet known whether this population is unusually large or whether these findings typify the deep forereef fauna of the region.

The Feasibility of Enhancing Red Sea Urchin, Strongylocentrotus iranciscanus, Stocks in California: An Analysis of the Options

The California fishery for red sea urchins, Strongylocentrotus franciscanus, has undergone explosive growth in recent years and is approaching full exploitation. Thus, there is considerable interest in enhancing stocks to maintain a high rate of landings. Fishable stocks of red sea urchins in different areas appear to be limited at three stages in their life history: By the availability of larvae, by the survival of newly settled to mid-sized animals, and by the food available to support growth and reproduction of larger animals. Here I review other efforts, notably the extensive Japanese work, to enhance fishable stocks of benthic marine invertebrates, and consider the potential options for red sea urchins at different points of limitation. These include collecting or culturing seed for outplanting, physical habitat improvement measures, improving the food supply, and conservation measures to protect existing stocks until alternate methods are proven and in place. The options are compared in terms of biological feasibility, capital and labor requirements, and potential implications for change in the structure of the fishing industry.

Effects of experimental harvest on red sea urchins (Strongylocentrotus franciscanus) in northern Washington

Commercial harvest of red sea urchins began in Washington state in 1971. Harvests peaked in the late 1980s and have since declined substantially in Washington and other areas of the U.S. west coast. We studied effects of experimental harvest on red sea urchins in San Juan Channel (SJC), a marine reserve in northern Washing-ton. We recorded changes in density and size distribution of sea urchin populations resulting from three levels of experimental harvest: 1) annual size-selective harvest (simulating cur-rent commercial urchin harvest regulations), 2) monthly complete (non–size selective) harvest, and 3) no harvest (control) sites. We also examined re-colonization rates of harvested sites. The red sea urchin population in SJC is composed of an accumulation of large, old individuals. Juvenile urchins represent less than 1% of the population. Lower and upper size limits for commercial harvest protect 5% and 45% of the population, respectively. Complete harvest reduced sea urchin densities by 95%. Annual size-selective harvest significantly decreased sea urchin densities by 67% in the first year and by 47% in the second year. Two years of size-selective harvest significantly altered the size distribution of urchins, decreasing the density of legal-size urchins. Recolonization of harvested sites varied seasonally and occurred primarily through immigration of adults. Selective harvest sites were recolonized to 51% and 38% of original densities, respectively, six months after the first and second annual harvests. Yields declined substantially in the second year of size-selective harvest because of the fishing down of the population and because of low recolonization rates of harvested sites. We recommend that managers consider the potential efficacy of marine harvest refuges and reevaluate the existing upper and lower size limits for commercial harvest to improve long-term management of the sea urchin fishery in Washington.

Chemical forms of copper, zinc, lead and cadmium in sediments of the northern part of the Red Sea, Egypt

Total concentrations and chemical forms of heavy metals in sediment samples from the Gulf of Suez and the northern part of the Red Sea, collected during January 2003, were determined by atomic absorption spectrometry. Maximum concentrations of 49.56, 65.42, 33.52 and 3.52 µg/g were recorded for total Cu, Zn, Pb and Cd respectively at Adabiya location. These may reflect the high contribution of land-based activities in the northern part of the Gulf. Also, high percentages of heavy metals were found in the residual fraction (Cu=78.61, Zn=77.10 and Pb=66.80%) while a high percentage of Cd was found in the carbonate fraction (45.82%). However, few or negligible percentages were recorded in the exchangeable fractions (Cu=0.51, Zn=1.57 and Pb=1.74%). Concentration of Cd in the exchangeable fraction was too low to be detected.

Expression pattern, cellular localization and promoter activity analysis of ovarian aromatase (Cyp19a1a) in protogynous hermaphrodite red-spotted grouper

Aromatase plays a key role in sex differentiation of gonads. In this study, we cloned the full-length cDNA of ovarian aromatase from protogynous hermaphrodite red-spotted grouper (Epinephelus akaara), and prepared the corresponding anti-EaCyp19a1a antiserum. Western blot and immunofluorescence studies revealed ovary-specific expression pattern of EaCyp19a1a in adults and its dynamic expression change during artificial sex reversal. EaCyp19a1a was expressed by follicular cells of follicular layer around oocytes because strong EaCyp19a1a immunofluorescence was observed in the cells of ovaries. During artificial sex reversal, EaCyp19a1a expression dropped significantly from female to male, and almost no any positive EaCyp19a1a signal was observed in testicular tissues. Then, we cloned and sequenced a total of 1967 bp T-flanking sequence of EaCyp19a1a promoter, and showed a number of potential binding sites for some transcriptional factors, such as SOX5, GATA gene family, CREB, AP1, FOXL1, C/EBP, ARE and SF-1. Moreover, we prepared a series of 5' deletion promoter constructs and performed in vitro luciferase assays of EaCyp19a1a promoter activities. The data indicated that the CREB regulation region from -1010 to -898 might be a major cis-acting element to EaCyp19a1a promoter, whereas the elements GATA and SOX5 in the region from -1216 to -1010 might be suppression elements. Significantly, we found a common conserved sequence region in the fish ovary-type aromatase promoters with identities from 93% to 34%. And, the motifs of TATA box, SF-1, SOX5, and CREB existed in the region and were conserved among the most of fish species. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

Analysis of coupled microcircular resonators coupled to a bus waveguide with high output efficiency

Coupled microcircular resonators tangentially coupled to a bus waveguide, which is between the resonators, are numerically investigated by the finite-difference time-domain technique. For symmetrically coupled microcircular resonators with refractive index of 3.2, radius of 2 mu m, and width of the bus waveguide of 0.4 mu m, a mode Q factor of the order of 105 is obtained for a mode at the frequency of 243 THz. An output coupling efficiency of as high as 0.99 is calculated for a mode with a Q factor ranging from 10(3) to 10(4). The mode Q factor is 2 orders larger than that of the modes confined in a single circular resonator tangentially coupled to the same bus waveguide. Furthermore, the high Q traveling modes in the coupled microcircular resonators are suitable for optical single processing.

Investigation on multiple-port microcylinder lasers based on coupled modes

Microcylinder resonators with multiple ports connected to waveguides are investigated by 2D finite-difference time-domain (FDTD) simulation for realizing microlasers with multiple outputs. For a 10 mu m radius microcylinder with a refractive index of 3.2 and three 2 mu m wide waveguides, confined mode at the wavelength of 1542.3 nm can have a mode Q factor of 6.7 x 10(4) and an output coupling efficiency of 0.76. AlGaInAs/InP microcylinder lasers with a radius of 10 mu m and a 2 mu m wide output waveguide are fabricated by planar processing techniques. Continuous-wave electrically injected operation is realized with a threshold current of 4 mA at room temperature, and the jumps of output power are observed accompanying a lasing mode transformation.

Strain-Compensated InGaAs/InAlAs Quantum Cascade Detector of 4.5 mu m Operating at Room Temperature

We present a strain-compensated InP-based InGaAs/InAlAs photovoltaic quantum cascade detector grown by solid source molecular beam epitaxy. The detector is based on a vertical intersubband transition and electron transfer on a cascade of quantum levels which is designed to provide longitudinal optical phonon extraction stairs. By careful structure design and growth, the whole epilayer has a residual strain toward InP substrate of only -2.8 x 10(-4). A clear narrow band detection spectrum centered at 4.5 mu m has been observed above room temperature for a device with 200 x 200 mu m(2) square mesa.