Integração de dados por meio de geoprocessamento, para a elaboração de mapas geotécnicos, análise do meio físico e suas interações com a mancha urbana : o caso de Porto Alegre (RS)

A elaboração de diagnósticos e a tomada de decisões sobre o meio físico, com a finalidade de estabelecer diretrizes para a ocupação racional do solo, são cada vez mais prementes, especialmente, no que diz respeito ao direcionamento da expansão urbana para áreas mais favoráveis. Da mesma forma, a facilidade de acesso aos parâmetros geotécnicos de uma região constituí um inestimável recurso nas etapas preliminares dos projetos de Engenharia, no planejamento de atividades extrativas e nos programas de preservação ambiental. A cartografia geotécnica, nesse sentido, tem sido um dos instrumentos mais eficientes para a avaliação do meio físico nas últimas décadas. Entretanto, o desenvolvimento de um mapa geotécnico requer a análise de um grande número de informações que precisam ser tratadas e combinadas com rapidez. Esta tese apresenta uma metodologia para a integração de dados, por meio da ferramenta básica geoprocessamento, visando agilizar, na fase de escritório, a elaboração de mapas geotécnicos e a análise de determinados aspectos do meio físico sob o ponto de vista da Geotecnia, bem como suas interações com a mancha urbana existente. A área teste escolhida é o município de Porto Alegre (RS) situado na porção leste do estado do Rio Grande do Sul, à margem esquerda do Lago Guaiba, cuja paisagem é marcada pela diversidade de cenários naturais formados por terrenos de coxilhas, morros, cristas, lagos e planícies. A metodologia envolve a captura, o processamento e a integração de informações provenientes de fontes diversas como mapas temáticos, levantamento aerofotogramétrico, cartas topográficas, fotografias aéreas, imagens de satélite, boletins de sondagens SPT (Standart Penetration Test), dissertações e teses acadêmicas. Para isso, é constituída por nove etapas distintas, que utilizam: a) sistema de digitalização para a conversão de informações analógicas para o meio digital; b) modelagem digital do terreno (MDT) para o modelamento e a identificação do relevo, a determinação de declividades, o mapeamento de áreas com isodeclividades e o cálculo do fator topográfico, esse último objetivando a determinação da suscetibilidade à erosão laminar; c) técnicas de processamento e classificação de imagens orbitais para os mapeamentos das áreas inundáveis e da mancha urbana; d) Sistemas de Informações Geográficas (SIGs) para o processamento e a integração de informações georreferenciadas no computador; e) banco de dados digital para o armazenamento de dados descritivos sobre o meio físico e parâmetros geotécnicos obtidos em laboratório, sondagens e outras formas de investigação in situ. A estimativa das unidades geotécnicas é procedida com base na proposta metodológica para mapeamento geotécnico desenvolvida por Davison Dias (1995), na Universidade Federal do Rio Grande do Sul (UFRGS). Além da elaboração do mapa geotécnico, a metodologia propõe a análise e o cruzamento de vários fatores do meio físico com a mancha urbana existente, ou com uma subárea pertencente à região de estudo, a geração de mapas de aptidão do solo para diferentes usos e a identificação das áreas consideradas de eventos perigosos e de risco geológico. Os principais softwares empregados são o AutoCAD@, o SURFER@, ACESS@ e o IDRISI 2.0@, desenvolvido pela Clark University, USA. Os resultados obtidos a partir da implementação da metodologia demonstraram a importância e a contribuição que a ferramenta básica geoprocessamento pode trazer aos estudos geotécnicos. Os diferentes sistemas de geoprocessamento utilizados para a manipulação e tratamento das informações espaciais mostraram-se adequados e eficientes quando aplicados na coleta, processamento e integração de dados geotécnicos. Para a área teste foram identificadas trinta e sete unidades com perfis de solos com comportamento geotécnico praticamente similar frente ao uso e à ocupação do solo, cujas informações descritivas sobre o meio físico puderam ser facilmente acessadas e visualizadas, no computador, por meio da integração banco de dados geotécnicos com Sistema de Informações Geográficas. Por outro lado, o emprego de técnicas de processamento e classificação de imagens digitais revelou-se um recurso importante para a obtenção de informações sobre o meio físico, enquanto o uso de modelagem digital do terreno (MDT) agilizou o mapeamento das declividades e o cálculo da suscetibilidade potencial à erosão laminar, além de permitir a geração do relevo em perspectiva da região estudada.

Fixador Borboleta Base

Este material demonstra a elaboração das vistas ortogonais utilizando como base o desenho de um fixador. Faz também uso de comandos trabalhados anteriormente.

GPON / FTTH: FTTH_fiber to the home

As redes de comunicação de nova geração, onde se incluem as tecnologias de fibra óptica, têm sido uma área na qual tem havido imensa investigação e desenvolvimento. As tecnologias de FTTx, em especial a FTTH, já são uma realidade em milhares de habitações em variadíssimos países. A presente dissertação descreve um estudo da tecnologia GPON - Gigabit Passive Optical Network - nas instalações da EMACOM, Telecomunicações da Madeira, Unipessoal, Lda. Inicialmente são enumerados os requisitos necessários, quer seja por parte dos clientes como dos fornecedores. Em seguida apresenta-se o padrão do ITU-T G.984, contendo as várias camadas, tais como a camada física e a camada de convergência de transmissão, abordando também a estrutura das tramas e as principais características do referido padrão. Depois é dado a conhecer ao leitor os elementos que constituem uma rede GPON, sejam estes equipamentos passivos ou activos. Seguidamente foi descrito o planeamento para o projecto proposto onde foram estudados os vários tipos de arquitectura utilizados pelo FTTH e definiu-se qual seria a melhor opção para a zona urbana considerada. Utilizou-se o ArcMap da ESRI Portugal - Sistemas e Informação Geográfica, S.A, criando uma base de dados e um esquema da própria rede num mapa da freguesia de São Martinho. Utilizou-se o AutoCad, onde foram elaborados vários sinópticos da rede da área escolhida, nos quais englobam a rede de alimentação, e a rede de distribuição. Toda a informação ilustrada nos sinópticos foi colocada numa folha de cálculo de Excel sendo mais rápida a sua pesquisa. Posteriormente, criou-se uma lista de material com as quantidades necessárias a utilizar para a sua implementação. Para verificar a viabilidade do projecto em termos de potência óptica foi efectuado um cálculo do balanço de potência. Assim, é considerada a ligação mais distante para averiguar se existe potência óptica suficiente para cobrir essa ligação. Caso seja viável, então os outros pontos de distribuição ópticos com distâncias inferiores também estarão suficientemente alimentados em termos ópticos. São ainda abordados os vários tipos de perdas nas fibras ópticas, as definições de link power e link loss budgets. Finalmente, foram efectuados testes de simulação com o programa OptiSystem simulando a ligação usada para o cálculo de potência podendo-se assim comparar valores e verificar o desempenho do sistema através do diagrama de olho obtido.

Environmental adaptation of the source of the subbasin of Rico Stream, Monte Alto - SP, Brazil

Este trabalho teve como principal objetivo definir padrões fotográficos que representem o uso e a ocupação do solo da cabeceira de drenagem do Córrego Rico, localizada no Município de Monte Alto, Estado de São Paulo, para fins de adequação ambiental no que tange à legislação florestal brasileira. O mapeamento foi realizado utilizando técnicas de sensoriamento remoto e interpretação visual da imagem World View, seguida da digitalização da rede de drenagem e vegetações (naturais e agrícolas) no AutoCad, com auxílio de documentos e trabalho de campo. A área de estudo apresenta uma superfície de 2.141,53 ha, e os resultados permitiram constatar que a principal cultura é a cana-de-açúcar, com 546,34 ha, seguida de pastagens, com 251,22 ha, culturas perenes, com 191,71 ha, Eucalipto, com 57,31 ha, e a cebola, com 49,52 ha da área total, confirmando o avanço dos canaviais na região. A área possui 375,04 ha de áreas de preservação permanente (APPs), e desta superfície verificou-se que apenas 72,17 ha (19,24%) encontram-se compostos por vegetação arbórea ou mata, e destas 302,87 ha precisam ser enriquecidos e reflorestados com vegetação nativa da região, de acordo com legislação vigente. Os dados de área possibilitam futuras propostas de modelos de adequação ambiental para a microbacia, de acordo com a legislação ambiental vigente.

Effect of heat treatment on stainless steel orthodontic wires

This study evaluated the effect of heat treatment on CrNi stainless steel orthodontic archwires. Half of forty archwires of each thickness - 0.014 (0.35 mm), 0.016 (0.40 mm), 0.018 (0.45 mm) and 0.020 (0.50 mm) (totalling 160 archwires) - were subjected to heat treatment while the remainder were not. All of the archwires had their individual thickness measured in the anterior and posterior regions using AutoCad 2000 software before and after compressive and tensile strength testing. The data was statistically analysed utilising multivariance ANOVA at a 5% significance level. All archwires without heat treatment that were subjected to tensile strength testing presented with anterior opening, which was more accentuated in the 0.020 archwires. In the posterior region, the opening produced by the tensile force was more accentuated in the archwires without heat treatment. There was greater stability in the thermally treated archwires, especially those subjected to tensile strength testing, which indicates that the heat treatment of orthodontic archwires establishes a favourable and indispensable condition to preserve the intercanine width.

Comparison between complete denture and implant-retained overdenture: effect of different mucosa thickness and resiliency on stress distribution

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of stress distribution between complete denture and implant-retained overdenture-2D FEA

The aim of this study was to compare the stress distribution induced by posterior functional loads on conventional complete dentures and implant-retained overdentures with different attachment systems using a two-dimentional Finite Element Analysis (FEA-2D). Three models representative of edentulous mandible were constructed on AutoCAD software; Group A (control), a model of edentulous mandible supporting a complete denture; Group B, a model of edentulous mandible supporting an overdenture over two splinted implants connected with the bar-clip system; Group C, a model of edentuluos mandible supporting an overdenture over two unsplinted impants with the O-ring system. Evaluation was conducted on Ansys software, with a vertical force of 100 N applied on the mandibular left first molar. When the stress was evaluated in supporting tissues, groups B (51.0 MPa) and C (52.6 MPa) demonstrated higher stress values than group A (10.1 MPa). Within the limits of this study, it may be conclued that the use of an attachment system increased stress values; furthermore, the use of splinted implants associated with the bar-clip attachment system favoured a lower stress distribution over the supporting tissue than the unsplinted implants with an O-ring abutment to retain the manibular overdenture.

Influence of Ridge Inclination and Implant Localization on the Association of Mandibular Kennedy Class I Removable Partial Denture

The aim of this study was to evaluate the tendency of displacement of the supporting structures of the distal extension removable partial denture (DERPD) associated to the implant with different inclinations of alveolar ridge and implant localizations through a two-dimensional finite-element method. Sixteen mandibular models were fabricated, presenting horizontal, distally descending, distally ascending, or descending-ascending ridges. All models presented the left canine and were rehabilitated with conventional DERPD or implant-retained prosthesis with the ERA system. The models were obtained by the AutoCAD software and transferred to the finite-element software ANSYS 9.0 for analysis. A force of 50 N was applied on the cusp tips of the teeth, with 5 points of loading of 10 N. The results were visualized by displacement maps. For all ridge inclinations, the assembly of the DERPD with distal plate retained by an anterior implant exhibited the lowest requisition of the supporting structures. The highest tendency of displacement occurred in the model with distally ascending ridge with incisal rest. It was concluded that the association of the implant decreased the displacement of the DERPD, and the anterior positioning of the implant associated to the DERPD with the distal plate preserved the supporting structures for all ridges.

Effect of different repair techniques on the accuracy of repositioning the fractured denture base

Objective:This study investigated the efficacy of different techniques for the union of fragments of a denture before repair and on the accuracy of the reposition.Materials and methods:For this study, 20 maxillary dentures made with Lucitone 550 heat-cured resin were used. Points were determined with a scanner on the cusp of the teeth, as a measurement of the segments. After digitisation, each model was exported to the AUTOCAD R 14 program and two-dimensional measurements of the distances between the marked points were made. After the initial analysis, the dentures were fractured into two segments using an impact test machine. For the repair, maxillary dentures were divided into two groups; in the first, the repair was carried out using Kerr's sticky wax and in the second group, Super Bonder was used to join the fragments, with subsequent inclusion of DENTSPLY((R)) Repair Material resin. After the repair, the points of the maxillary dentures were measured again. The numerical values obtained were tabulated to compare the measurements before fracture and after the repair. For statistical analysis, analysis of variance was employed, using a single factor and double factor, followed by the Tukey test with a reliability of 95%.Results:The results demonstrated a statistically significant difference between the materials used to join the dentures for repair, where the dentures were joined with sticky wax presented a larger variation in the distances between the points.Conclusion:The variation in distances between the points is influenced by the agent of repair.

Influence of Implant Inclination Associated With Mandibular Class I Removable Partial Denture

The aim of this study was to use two-dimensional finite element method to evaluate the displacement and stress distribution transmitted by a distal extension removable partial denture (DERPD) associated with an implant placed at different inclinations (0, 5, 15, and 30 degrees) in the second molar region of the edentulous mandible ridge. Six hemimandibular models were created: model A, only with the presence of the natural tooth 33; model B, similar to model A, with the presence of a conventional DERPD replacing the missing teeth; model C, similar to the previous model, with a straight implant (0 degrees) in the distal region of the ridge, under the denture base; model D, similar to model C, with the implant angled at 5 degrees in the mesial direction; model E, similar to model C, with the implant angled at 15 degrees in the mesial direction; and model F, similar to ME, with the implant angled at 30 degrees in the mesial direction. The models were created with the use of the AutoCAD 2000 program (Autodesk, Inc, San Rafael, CA) and processed for finite element analysis by the ANSYS 8.0 program (Swanson Analysis Systems, Houston, PA). The force applied was vertical of 50 N on each cusp tip. The results showed that the introduction of the RPD overloaded the supporting structures of the RPD and that the introduction of the implant helped to relieve the stresses of the mucosa alveolar, cortical bone, and trabecular bone. The best stress distribution occurred in model D with the implant angled at 5 degrees. The use of an implant as a support decreased the displacement of alveolar mucosa for all inclinations simulated. The stress distribution transmitted by the DERPD to the supporting structures was improved by the use of straight or slightly inclined implants. According to the displacement analysis and von Mises stress, it could be expected that straight or slightly inclined implants do not represent biomechanical risks to use.

Effect of Flasking and Polymerization Techniques on Tooth Movement in Complete Denture Processing

Purpose: The purpose of this study was to compare the artificial tooth positional changes following the flasking and polymerization of complete dentures by a combination of two flasking methods and two polymerization techniques using computer graphic measurements.Materials and Methods: Four groups of waxed complete dentures (n = 10) were invested and polymerized using the following techniques: (1) adding a second investment layer of gypsum and conventional water bath polymerization (Control), (2) adding a second investment layer of gypsum and polymerization with microwave energy (Gyp-micro), (3) adding a second investment layer of silicone (Zetalabor) and conventional polymerization (Silwater), and (4) adding a second investment layer of silicone and polymerization with microwave energy (Silmicro). For each specimen, six segments of interdental distances (A to F) were measured to determine the artificial tooth positions in the waxed and polymerized stages using software program AutoCad R14. The mean values of the changes were statistically compared by univariate ANOVA with Tukey post-hoc test at 5% significance.Results: There were no significant differences among the four groups, except for segment D of the Silmicro group (-0.004 +/- 0.032 cm) in relation to the Gypwater group (0.044 +/- 0.031 cm) (p < 0.05), which presented, repectively, expansion and shrinkage after polymerization.Conclusions: Within the limitations of this study, it was concluded that although the differences were not statistically significant, the use of a silicone investment layer when flasking complete dentures resulted in the least positional changes of the artificial teeth regardless of the polymerization technique.

Influence of Different Base Thicknesses on Maxillary Complete Denture Processing: Linear and Angular Graphic Analysis on the Movement of Artificial Teeth

Objective: The purpose of this study was to compare the dental movement that occurs during the processing of maxillary complete dentures with 3 different base thicknesses, using 2 investment methods, and microwave polymerization.Methods: A sample of 42 denture models was randomly divided into 6 groups (n = 7), with base thicknesses of 1.25, 2.50, and 3.75 mm and gypsum or silicone flask investment. Points were demarcated on the distal surface of the second molars and on the back of the gypsum cast at the alveolar ridge level to allow linear and angular measurement using AutoCAD software. The data were subjected to analysis of variance with double factor, Tukey test and Fisher (post hoc).Results: Angular analysis of the varying methods and their interactions generated a statistical difference (P = 0.023) when the magnitudes of molar inclination were compared. Tooth movement was greater for thin-based prostheses, 1.25 mm (-0.234), versus thick 3.75 mm (0.2395), with antagonistic behavior. Prosthesis investment with silicone (0.053) showed greater vertical change compared with the gypsum investment (0.032). There was a difference between the point of analysis, demonstrating that the changes were not symmetric.Conclusions: All groups evaluated showed change in the position of artificial teeth after processing. The complete denture with a thin base (1.25 mm) and silicone investment showed the worst results, whereas intermediate thickness (2.50 mm) was demonstrated to be ideal for the denture base.

Prosthetic transfer impression accuracy evaluation for osseointegrated implants

Purpose: The objective of this study was to evaluate and compare 3 impression techniques for osseointegrated implant transfer procedures.Materials and Methods: (1) Group Splinted with Acrylic Resin (SAR), impression with square copings splinted with prefabricated autopolymerizing acrylic resin bar; (2) Group Splinted with Light-Curing Resin (SLR), impression, with square copings splinted with prefabricated light-curing composite resin bar; (3). Group Independent Air-abraded (IAA), impression with independent square coping aluminum oxide air-abraded. Impression procedures were performed with polyether material, and the data obtained was compared with a control group. These were characterized by metal matrix (MM) measurement values of the implants inclination positions at 90 and 05 degrees in relation to the matrix surface. Readings of analogs and implant inclinations were assessed randomly through graphic computation AutoCAD software. Experimental groups angular deviation with MM were submitted to analysis of variance and means were compared through Tukey's test (P < 0.05).Results: There was no statistical significant difference between SAR and SLR experimental groups and MM for vertical and angulated implants. Group IAA presented a statistically significant difference for angulated implants.Conclusion: It was concluded within the limitations of this study, that SAR and SLR produced more accurate casts than IAA technique, which presented inferior results.

All-Ceramic Crowns Over Single Implant Zircon Abutment. Influence of Young's Modulus on Mechanics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clinical microscopic analysis of protaper retreatment system efficacy considering root canal thirds using three endodontic sealers

To evaluate the efficacy of ProTaper Universal rotary retreatment system and the influence of sealer type on the presence of filling debris in the reinstrumented canals viewed in an operative clinical microscope. Forty-five palatal root canals of first molars were filled with gutta-percha and one of the following sealers: G1, EndoFill; G2, AH Plus; G3, Sealapex. The canals were then reinstrumented with ProTaper Universal rotary system. Roots were longitudinally sectioned and examined under an operative clinical microscope (10x), and the amount of filling debris on canal walls was analyzed using the AutoCAD 2004 software. A single operator used a specific software tool to outline the canal area and the filling debris area in each third (cervical, middle, and apical), as well as the total canal area. Data were analyzed by Kruskal-Wallis test and Tukey test at P < 0.05. Sealapex demonstrated significant differences in the average of filling debris area/canal among the 3 thirds. This group revealed that apical third showed more debris than the both cervical and middle third (P < 0.0001). Endofill presented significantly more filling debris than Sealapex in the cervical third (P < 0.05). In the middle (P = 0.12) and apical third (P = 0.10), there were no differences amongst groups. Debris was left in all canal thirds, regardless of the retreatment technique. The greatest differences between techniques and sealers were found in the cervical third. Microsc. Res. Tech. 75:12331236, 2012. (C) 2012 Wiley Periodicals, Inc.