Investigation of the intensity dependence of amplitude noise in electro-optic phase modulators

This thesis studied the source of instability in optical phase modulators used in high accuracy laser measurement systems. The nonlinear origin of the amplitude noise helped further reducing this instability in applications that rely on phase modulators to function. This outcome will have positive impacts on the development of new methods in the amplitude noise suppression.

Dependence of residual amplitude noise in electro-optic phase modulators on the intensity distribution of the incident field

Our results demonstrate that photorefractive residual amplitude modulation (RAM) noise in electro-optic modulators (EOMs) can be reduced by modifying the incident beam intensity distribution. Here we report an order of magnitude reduction in RAM when beams with uniform intensity (flat-top) profiles, generated with an LCOS-SLM, are used instead of the usual fundamental Gaussian mode (TEM00). RAM arises from the photorefractive amplified scatter noise off the defects and impurities within the crystal. A reduction in RAM is observed with increasing intensity uniformity (flatness), which is attributed to a reduction in space charge field on the beam axis. The level of RAM reduction that can be achieved is physically limited by clipping at EOM apertures, with the observed results agreeing well with a simple model. These results are particularly important in applications where the reduction of residual amplitude modulation to 10^-6 is essential.

Auto-inhibition of hydrogen gas evolution on gold in aqueous acid solution

It was demonstrated recently that dramatic changes in the redox behaviour of gold/aqueous solution interfaces may be observed following either cathodic or thermal electrode pretreatment. Further work on the cathodic pretreatment of gold in acid solution revealed that as the activity of the gold surface was increased, its performance as a substrate for hydrogen gas evolution under constant potential conditions deteriorated. The change in activity of the gold atoms at the interface, which was attributed to a hydrogen embrittlement process (the occurrence of the latter was subsequently checked by surface microscopy), was confirmed, as in earlier work, by the appearance of a substantial anodic peak at ca. 0.5 V (RHE) in a post-activation positive sweep. Changes in the catalytic activity of a metal surface reflect the fact that the structure (or topography), thermodynamic activity and electronic properties of a surface are dependent not only on pretreatment but also, in the case of the hydrogen evolution reaction, vary with time during the course of reaction. As will be reported shortly, similar (and often more dramatic) time-dependent behaviour was observed for hydrogen gas evolution on other metal electrodes.

Formation of nanostructured porous Cu-Au surfaces : the influence of cationic sites on (electro)-catalysis

The fabrication of nanostructured bimetallic materials through electrochemical routes offers the ability to control the composition and shape of the final material that can then be effectively applied as (electro)-catalysts. In this work a clean and transitory hydrogen bubble templating method is employed to generate porous Cu–Au materials with a highly anisotropic nanostructured interior. Significantly, the co-electrodeposition of copper and gold promotes the formation of a mixed bimetallic oxide surface which does not occur at the individually electrodeposited materials. Interestingly, the surface is dominated by Au(I) oxide species incorporated within a Cu2O matrix which is extremely effective for the industrially important (electro)-catalytic reduction of 4-nitrophenol. It is proposed that an aurophilic type of interaction takes place between both oxidized gold and copper species which stabilizes the surface against further oxidation and facilitates the binding of 4-nitrophenol to the surface and increases the rate of reaction. An added benefit is that very low gold loadings are required typically less than 2 wt% for a significant enhancement in performance to be observed. Therefore the ability to create a partially oxidized Cu–Au surface through a facile electrochemical route that uses a clean template consisting of only hydrogen bubbles should be of benefit for many more important reactions.

Orchids, intersex and the auto/biographical project

Auto/biographical documentaries ask audiences to take a ‘leap of faith’, not being able to offer any real ‘proof’ of the people and events they claim to document, other than that of the film-maker’s saying this is what happened. With only memory and history seen through the distorting lens of time, ‘the authenticity of experience functions as a receding horizon of truth in which memory and testimony are articulated as modes of salvage’. Orchids: My Intersex Adventure follows a salvaging of the film-maker’s life events and experiences, being born with an intersex condition, and, via the filming and editing process, revolving around the core question: who am I? From this transformative creative documentary practice evolves a new way of embodying experience and ‘seeing’, playfully dubbed here as the ‘intersex gaze’.

(Im)moral bodies : intersex and auto/biographical documentary

In this paper I question the representation of and ethical responsibilities to young people with intersex (hermaphroditic) conditions in documentary film, and explore the creative practice challenges working with bodies with intersex, embedded in the production of a feature auto/biographical documentary entitled Orchids. Bodies with intersex conditions are often presented as abject, in need of ‘fixing’ during infancy and early childhood, undesirable, and incapable of desire. Seen through the lens of experience and memory, Orchids takes a personal coming-of-age narrative and reconfigures understandings of the (im)moral body in the light of its transformative potential. Just as practice research challenges the dominant hegemony of quantitative and qualitative research, my creative work positions itself as a nuanced performative piece, and through its distinctive distillation and celebration of a new form of discursive rupturing discovers the intersex voice.

Auto-tune, and why we shouldn't be surprised that Britney can't sing

Put Britney Spears into a YouTube search and the third auto-fill on the list is “Britney Spears without Autotune”. Auto-Tune has become the music industry equivalent of doping in the Tour de France circa 2005; we know everyone’s doing it, but we still have a sense of surprise and outrage when it becomes public. In the last week or so a video has surfaced of the pop singer Britney Spears – with examples of her vocal before and after processing. Whether or not the “before” version is actually the raw material for the “after” version is difficult to say. What’s not difficult to say is that the “before” vocal is distinctly lacking in a demonstrable ability to sing in tune.

Micro foundations of strategic capability development : a case study within the auto industry

The importance of firms’ adaptation processes is prominent in today’s business environment which is characterised by ever changing customers, technologies, and competition. Ever since Schumpeter’s (1942) classic work strategic renewal has been found crucial for firms’ adaptation to environmental change. The role of strategic renewal in firms’ adaptation processes includes development of capabilities for the purpose of sustainability of competitive advantage against environmental changes.

Self and other in communication and cognition : the role of auto-communication and intersubjectivity in autopoiesis of psychic systems

By referring to Niklas Luhmann's theory of self-referential systems, Aldo Mascareño (2008, submitted for publication) gives an account of system-environment interrelatedness, explaining how social and individual constitute each other through the process of communication and co-creation of meanings. Two possible extensions to his account are discussed. Firstly, auto-communication within the system that happens without any external reference needs to be taken into account while describing the existence and constant re-creation of psychic systems. Secondly, in order for the system and environment or two systems to communicate, an imagined and temporary intersubjectivity between the two needs to be assumed.

Support for an auto-associative model of spoken cued recall: Evidence from fMRI

Cued recall and item recognition are considered the standard episodic memory retrieval tasks. However, only the neural correlates of the latter have been studied in detail with fMRI. Using an event-related fMRI experimental design that permits spoken responses, we tested hypotheses from an auto-associative model of cued recall and item recognition [Chappell, M., & Humphreys, M. S. (1994). An auto-associative neural network for sparse representations: Analysis and application to models of recognition and cued recall. Psychological Review, 101, 103-128]. In brief, the model assumes that cues elicit a network of phonological short term memory (STM) and semantic long term memory (LTM) representations distributed throughout the neocortex as patterns of sparse activations. This information is transferred to the hippocampus which converges upon the item closest to a stored pattern and outputs a response. Word pairs were learned from a study list, with one member of the pair serving as the cue at test. Unstudied words were also intermingled at test in order to provide an analogue of yes/no recognition tasks. Compared to incorrectly rejected studied items (misses) and correctly rejected (CR) unstudied items, correctly recalled items (hits) elicited increased responses in the left hippocampus and neocortical regions including the left inferior prefrontal cortex (LIPC), left mid lateral temporal cortex and inferior parietal cortex, consistent with predictions from the model. This network was very similar to that observed in yes/no recognition studies, supporting proposals that cued recall and item recognition involve common rather than separate mechanisms.

The dynamics of polymerized carbon nanotubes in semiconductor polymer electronics and electro-mechanical sensing

Polymerized carbon nanotubes (CNTs) are promising materials for polymer-based electronics and electro-mechanical sensors. The advantage of having a polymer nanolayer on CNTs widens the scope for functionalizing it in various ways for polymer electronic devices. However, in this paper, we show for the first time experimentally that, due to a resistive polymer layer having carbon nanoparticle inclusions and polymerized carbon nanotubes, an interesting dynamics can be exploited. We first show analytically that the relative change in the resistance of a single isolated semiconductive nanotube is directly proportional to the axial and torsional dynamic strains, when the strains are small, whereas, in polymerized CNTs, the viscoelasticity of the polymer and its effective electrical polarization give rise to nonlinear effects as a function of frequency and bias voltage. A simplified formula is derived to account for these effects and validated in the light of experimental results. CNT–polymer-based channels have been fabricated on a PZT substrate. Strain sensing performance of such a one-dimensional channel structure is reported. For a single frequency modulated sine pulse as input, which is common in elastic and acoustic wave-based diagnostics, imaging, microwave devices, energy harvesting, etc, the performance of the fabricated channel has been found to be promising.

Turning the Kaleidoscope - (E)FL Educational Experience and Inquiry as Auto/biography

This book is a study on learning, teaching/counselling, and research on the two. My quest has been to find a pedagogically-motivated way of researching learning and teaching interaction, and in particular counselling, in an autonomous language-learning environment. I have tried to develop a method that would make room for lived experience, meaning-making and narrating, because in my view these all characterise learning encounters between language learners and counsellors, and learners and their peers. Lived experience as a source of meaning, telling and co-telling becomes especially significant when we try to listen to the diverse personal and academic voices of the past as expressed in autobiographical narratives. I have aimed at researching various ALMS dialogues (Autonomous Learning Modules, University of Helsinki Language Centre English course and programme), and autobiographical narratives within them, in a way that shows respect for the participants, and that is relevant, reflective and, most importantly, self-reflexive. My interest has been in autobiographical telling in (E)FL [(English as a) foreign language], both in students first-person written texts on their language- learning histories and in the sharing of stories between learners and a counsellor. I have turned to narrative inquiry in my quest and have written the thesis as an experiential narrative. In particular, I have studied learners and counsellors in one and the same story, as characters in one narrative, in an attempt to avoid the impression that I am telling yet another separate, anecdotal story, retrospectively. Through narrative, I have shed light on the subjective dimensions of language learning and experience, and have come closer to understanding the emotional aspects of learning encounters. I have questioned and rejected a distanced and objective approach to describing learning and teaching/counselling. I have argued for a holistic and experiential approach to (E)FL encounters in which there is a need to see emotion and cognition as intertwined, and thus to appreciate learners and counsellors emotionally-charged experiences as integral to their identities. I have also argued for a way of describing such encounters as they are situated in history, time, autobiography, and the learning context. I have turned my gaze on various constellations of lived experience: the data was collected on various occasions and in various settings during one course and consists of videotaped group sessions, individual counselling sessions between students and their group counsellor, biographic narrative interviews with myself, open-ended personally-inspired reflection texts written by the students about their language-learning histories, and student logs and diaries. I do not consider data collection an unproblematic occasion, or innocent practice, and I defend the integrity of the research process. Research writing cannot be separated from narrative field work and analysing and interpreting the data. The foci in my work have turned to be the following: 1) describing ALMS encounters and specifying their narrative aspects; 2) reconceptualising learner and teacher autonomy in ALMS and in (E)FL; 2) developing (E)FL methodologically through a teacher-researcher s identity work; 4) research writing as a dialogical narrative process, and the thesis as an experiential narrative. Identity and writing as inquiry, and the deeply narrative and autobiographical nature of the (E)FL teaching/counselling/researching have come to the fore in this research. Research writing as a relational activity and its implications for situated ways of knowing and knowledge turned out to be important foci. I have also focussed on the context-bound and local teacher knowledge and ways of knowing about being a teacher, and I have argued for personal ways of knowing about, and learning and studying foreign languages. I discuss research as auto/biography: as a practising counsellor I use my own life and (E)FL experience to understand and interpret the stories of the research participants even though I was not involved in their course work. The supposedly static binaries of learner/teacher, and also learner autonomy/teacher autonomy, are thus brought into the discussion. I have highlighted the infinite variability and ever-changing nature of learning and teaching English, but the book is also of relevance to foreign language education in general.

Studies in the Electro-deposition of cobalt from fluoborate baths

The optimum conditions for the electrode position of cobalt were arrived at, from a study of the effect or variables on the planning characteristics of cobalt flu borate solutions.