Microstructure and texture evolution during beta extrusion of boron modified Ti-6A1-4V alloy

Boron addition to conventional titanium alloys below the eutectic limit refines the cast microstructure and improves mechanical properties. The present work explores the influence of hypoeutectic boron addition on the microstructure and texture evolution in Ti-6Al-4V alloy under beta extrusion. The beta extruded microstructure of Ti-6Al-4V is characterized by shear bands parallel to the extrusion direction. In contrast, the extruded Ti-6Al-4V-0.1B alloy shows a regular beta worked microstructure consisting of fine prior beta grains and acicular alpha-lamellae with no signs of the microstructural instability. Crystallographic texture after extrusion was almost identical for the two alloys indicating the similarity in their transformation behavior, which is attributed to complete dynamic recrystallization during beta processing. Microstructural features as well as crystallographic texture indicate dominant grain boundary related deformation processes for the boron modified alloy that leads to homogeneous deformation without instability formation. The absence of shear bands has significant technological importance as far as the secondary processing of boron added alloys in (alpha + beta)-phase field are concerned. (C) 2012 Elsevier B.V. All rights reserved.

Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid

We report investigations on the texture, corrosion and wear behavior of ultra-fine grained (UFG) Ti-13Nb-Zr alloy, processed by equal channel angular extrusion (ECAE) technique, for biomedical applications. The microstructure obtained was characterized by X-ray line profile analysis, scanning electron microscope (SEM) and electron back scattered diffraction (EBSD). We focus on the corrosion resistance and the fretting behavior, the main considerations for such biomaterials, in simulated body fluid. To this end. potentiodynamic polarization tests were carried out to evaluate the corrosion behavior of the UFG alloy in Hanks solution at 37 degrees C. The fretting wear behavior was carried out against bearing steel in the same conditions. The roughness of the samples was also measured to examine the effect of topography on the wear behavior of the samples. Our results showed that the ECAE process increases noticeably the performance of the alloy as orthopedic implant. Although no significant difference was observed in the fretting wear behavior, the corrosion resistance of the UFG alloy was found to be higher than the non-treated material. (c) 2012 Elsevier B.V. All rights reserved.

Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)(m)-SiCp composite

Cast Mg/SiCp and AZ91/SiCp composites were successfully hot extruded vis-a-vis cast and unreinforced Mg and AZ91 alloy up to low (R=15:1) and high (R=54:1) extrusion ratios at 350 degrees C. Significant matrix grain refinement was noticed after extrusion due to dynamic recrystallization; the degree of refinement being relatively higher for the two composites. The AZ91 based materials (AZ91 and AZ91/SiCp) exhibited comparatively finer grain size both in cast condition and after extrusion due to strong pinning effect from alloying elements as well as Mg17Al12 intermetallic phase. Compositional analyses eliminated the possibility of any interfacial reaction between matrix (Mg/AZ91) and second phase reinforcement (SiCp) in case of the composites. Texture evolution shows the formation of < 10 (1) over bar0 >parallel to ED texture fibre for all the materials after extrusion irrespective of SiCp addition or alloying which is primarily due to the deformation of the matrix phase. Micro-hardness did not significantly increased on extrusion in comparison to the respective cast materials for both composites and unreinforced alloys. Dynamic mechanical analysis, however, confirmed that the damping properties were affected by the extrusion ratio and to a lesser extent, due to the presence of second phase at room temperature as well as at higher temperature (300 degrees C). (C) 2014 Elsevier B.V. All rights reserved.

Influencia de la forma del corte apical y de la posición de la estaca, en la producción de raiz en yuca (Manihot utilissima polh)

Con el objeto de determinar si la posición y el corte en el extremo apical, influían en el rendimiento de la raíz de yuca, se hizo un ensayo en el cual se utilizaron tres posiciones diferentes: a) Horizontal, b) Inolinada y c) Vertical; con tres cortes diferentes en el extremo apical enterrado: 1) Redondo, 2) Chaflan y 3) Punta de lápiz. Se uso el diseño experimental de bloques completos al azar con arreglo de parcelas sub-divididas, empleándose seis repeticiones. La cosecha se hizo a los siente meses de la siembra, obteniéndose la mayor producción con la interacción posición inclinada corte chaflan, la cual mostró diferencia significativa para uno por ciento de error. La posición de siembra influyo significativamente sobre el rendimiento de raíz de yuca; observándose que la posición inclinada fue la que facilito mas el cultivo. Se hizo dos labores de limpia en todo el periodo de ensayo. El porcentaje de enraizamiento de plantas, altura de plantas numero de raíces, tamaño de raíces y no mostraron diferencias estadísticas significativas. Este ensayo se realizo en los campos de la Escuela Nacional de Agricultura y Ganadería (ENAG), durante el periodo de julio de 1968 a febrero de 1969. La variedad empleada fue la Cubana, cortándose para este estacas de cuarenta a cuarenta y cinco centímetros de longitud de todo el tallo, con excepción de la parte muy cerca de la raíz y la muy tierna cerca del extremo a pical.

Regeneration of Giant Salvinia from Apical and Axillary Buds following Desiccation or Physical Damage

Can a new giant salvinia infestation occur even if most of the mat is destroyed except for the protected buds? From this study, we are able to conclude that buds can produce new growth under certain stressful conditions. They must be greater than 0.2 cm in length and they must possess greater than 30% moisture content to survive.

Análise da eficácia do instrumento RECIPROC #25 em atingir o forame apical sem glide path

O presente estudo avaliou a eficáciado instrumento Reciproc#25 em atingir o forame de canais de molares inferiores sem um glide path manual prévio. Para isso, uma amostra geral de 300 molares inferiores foi radiografada e previamente selecionada quanto ao grau de curvatura segundo critério de Schneider sendo divididos em classes I e II. Após a aplicação dos critérios de inclusão e exclusão, uma amostragem total de 502 canais radiculares foi incluída para formar os grupos experimentais: 253 canais no grupo de molares inferiores classe I e 249 no grupo de molares classe II. Todos os canais foram instrumentados diretamente com a lima 25, sem nenhum glide path prévio, seguindo criteriosamente as diretrizes do fabricante. Os dados foram descritos como a frequência da distribuição do número de canais (%) nos quais foi possível chegar ao forame apical sem a necessidade de glide path, assim como o número de fraturas em cada grupo. Os resultados compilados dos 2 grupos experimentais mostraram que em 93,4% do total dos canais instrumentados, o instrumento R25 foi capaz de ir até o forame apical sem a necessidade de glide path. Em 6,4% do total dos canais, o instrumento R25 não chegou até o forame apical e em somente 0,2% dos casos ocorreu fratura da lima (um caso no grupo classe I, enquanto no grupo classe II não houve nenhuma ocorrência de fratura). O teste Qui-quadrado foi realizado para verificar se uma determinada classe de canais encontra-se mais associada ou não a necessidade de glide path quando o sistema Reciproc é usado. No grupo de molares classe II houve maior número de canais (23) que o instrumento R25 não foi capaz de ir até o forame apical do que no grupo de molares classe I (9), sendo essa diferença estatisticamente significante (Qui-quadrado, p=0,020, X2=5,452). Dentro das condições experimentais do presente estudo, pode-se concluir então quea lima R25 mostrou uma alta eficácia em instrumentar toda a extensão dos canais de molares inferiores classe I e II sem a necessidade de glide path prévio. Além disso, o sistema de instrumentação proposto mostrou-se altamente seguro quanto ao índice de fratura.

Investigation into channel angular extrusion and the UREAD energy absorption technique

.