Selective oxidation of allylic alcohols over highly ordered Pd/meso-Al2 O3 catalysts

Highly ordered mesoporous alumina was prepared via evaporation induced self assembly and was impregnated to afford a family of Pd/meso-Al2O3 catalysts for the aerobic selective oxidation (selox) of allylic alcohols under mild reaction conditions. CO chemisorption and XPS identify the presence of highly dispersed (0.9–2 nm) nanoparticles comprising heavily oxidised PdO surfaces, evidencing a strong palladium-alumina interaction. Surface PdO is confirmed as the catalytically active phase responsible for allylic alcohol selox, with initial rates for Pd/meso-Al2O3 far exceeding those achievable for palladium over either amorphous alumina or mesoporous silica supports. Pd/meso-Al2O3 is exceptionally active for the atom efficient selox of diverse allylic alcohols, with activity inversely proportional to alcohol mass.

The Relationship Between Cadwaladerite Al(OH)2Cl∙4H2O and Lesukite Al2(OH)5Cl∙2H2O as Investigated by SEM, PXRD, FTIR and Raman Spectroscopy

Cadwaladerite (Al(OH)2Cl∙4H2O) collected from Cerro Pintados, Chile described by Gordon in 1941 is designated as “doubtful” by the IMA. Material collected from the same locality in 2015 resembling the description of cadwaladerite gave a powder XRD pattern similar to lesukite (Al2(OH)5Cl∙2H2O). However, Gordon provided no X-ray data for his material from Cerro Pintados. In order to determine whether cadwaladerite and lesukite are the same mineral species, measurements were made on a suite of samples from various localities. A portion of the material collected by Gordon in 1941 was also obtained from the Mineralogical Museum of Harvard University. Type material of lesukite from a fumarolic environment at the Tolbachik Fissure in Kamchatka, Russia was obtained as well as lesukite from the Maria Mine, Chile (Arica Province) and a previously undescribed locality for lesukite (Barranaca del Sulfato, Mejillones Peninsula, Antofagasta Province). All samples are yellow to yellow-orange in colour and all exhibit small cubic crystals (up to 50µm), even Gordon’s cadwaladerite which was thought to be amorphous. The Chilean samples are all associated with halite and sometimes with anhydrite. These five samples were studied by SEM, FTIR, powder XRD, and Raman spectroscopy. A ratio of Al:Cl less than or equal to 1.3:1 was observed for all the samples, including measurements made on lesukite from the Russian locality Vergasova et al. studied in 1997, and determined to have a 2:1 ratio. SEM-EDS analyses also show all samples to have minor iron substitution, as well as copper substitution in two samples. FTIR spectra are very similar for all samples. Raman spectroscopy done on both samples collected in Cerro Pintados and the Russian lesukite gave similar spectra. Powder XRD analyses on all samples showed spectra identified to be lesukite, including Gordon’s cadwaladerite. Crystal cell parameters calculated from powder XRD ranged from 19.778Å to 19.878Å. Results using modern instrumental techniques confirm Gordon’s cadwaladerite, collected in 1939 and described in 1941, and lesukite are the same mineral species.

Near-infrared spectroscopic study of basic aluminum sulfate and nitrate

The tridecameric Al-polymer [AlO4Al12(OH)24(H2O)12]7+ was prepared by forced hydrolysis of Al3+ up to an OH/Al molar ratio of 2.2. Under slow evaporation crystals were formed of Al13-nitrate. Upon addition of sulfate the tridecamer crystallised as the monoclinic Al13-sulfate. These crystals have been studied using near-infrared spectroscopy and compared to Al2(SO4)3.16H2O. Although the near-infrared spectra of the Al13-sulfate and nitrate are very similar indicating similar crystal structures, there are minor differences related to the strength with which the crystal water molecules are bonded to the salt groups. The interaction between crystal water and nitrate is stronger than with the sulfate as reflected by the shift of the crystal water band positions from 6213, 4874 and 4553 cm–1 for the Al13 sulfate towards 5925, 4848 and 4532 cm–1 for the nitrate. A reversed shift from 5079 and 5037 cm–1 for the sulfate towards 5238 and 5040 cm–1 for the nitrate for the water molecules in the Al13 indicate that the nitrate-Al13 bond is weakened due to the influence of the crystal water on the nitrate. The Al-OH bond in the Al13 complex is not influenced by changing the salt group due to the shielding by the water molecules of the Al13 complex.

Do nursing interventions targeting concurrent symptoms hold promise for managing fatigue in patients with advanced cancer?

TO THE EDITOR: It was with great interest that I read two recent articles by de Raaf et al1, and Bruera et al2. These authors are to be congratulated for completing two of the very few high quality randomized trials that evaluate complex interventions for managing fatigue in patients with advanced cancer. de Raaf et al conducted a non-blinded RCT with 152 patients with advanced cancer and reported significant reduction of fatigue in patients who received a nurse-led monitoring and protocol-guided treatment of physical symptoms compared with those who received usual care1. Patients who received this intervention experienced a significant improvement over time in general fatigue, at one-month follow-up and two-month follow-up. Another recent RCT conducted with 141 patients with advanced cancer by Bruera et al2 did not find any benefits of a nursing telephone intervention that involved systematic symptom assessment/management, medication review, psychosocial support and patient education in fatigue reduction, compared to those who received a control telephone intervention conducted by a non-professional...

Bentonite can decrease ammonia volatilisation losses from poultry litter: laboratory studies

Ammonia volatilisation from manure materials within poultry sheds can adversely affect production, and also represents a loss of fertiliser value from the spent litter. This study sought to compare the ability of alum and bentonite to decrease volatilisation losses of ammonia from spent poultry litter. An in-vessel volatilisation trial with air flushing, ammonia collection, and ammonia analysis was conducted over 64 days to evaluate the mitigation potential of these two materials. Water-saturated spent litter was incubated at 25°C in untreated condition (control) or with three treatments: an industry-accepted rate of alum [4% Al2(SO4)3·18H2O by dry mass of litter dry mass; ALUM], air-dry bentonite (127% by dry mass; BENT), or water-saturated bentonite (once again at 127% by dry mass; SATBENT). A high proportion of the nitrogen contained in the untreated spent litter was volatilised (62%). Bentonite additions were superior to alum additions at retaining spent litter ammonia (nitrogen losses: 15%, SATBENT; 34%, BENT; 54%, ALUM). Where production considerations favour comparable high rates of bentonite addition (e.g. where the litter is to be re-formulated as a fertiliser), this clay has potential to decrease ammonia volatilisation either in-shed or in spent litter stockpiles or formulated products, without the associated detrimental effect of alum on phosphorus availability.

Reduction behaviour of Fe3+/Al2O3 obtained from the mixed oxalate precursor and the formation of the Fe0-Al2O3 metal-ceramic composite

Reduction behaviour of Fe3+/Al2O3 obtained by the decomposition of the oxalate precursor has been investigated by employing X-ray diffraction (XRD), Mössbauer spectroscopy and electron paramagnetic resonance (EPR) spectroscopy. Calcination of Fe3+/Al2O3 at or below 1070 K yields mainly a poorly ordered, fine particulate form of ?-Al2�xFexO3. Calcination at or above 1220 K yields ?-Al2�xFexO3. Reduction of Fe3+/Al2O3 samples calcined at or below 1070 K gives the FeAl2O4 spinel on reduction at 870 K; samples calcined at or above 1220 K give Al2-xFexO3 with a very small proportion of metallic iron. Fe3+/Al2O3 samples calcined at 1220 K or above yield metallic iron and a very small proportion of the spinel on reduction below 1270 K. In the samples reduced at or above 1270 K, the main product is metallic iron in both ferromagnetic and superparamagnetic forms. The oxalate precursor route yields more metallic iron than the sol�gel route.

Investigations of the reduction behavior of Iron-impregnated alumina gels (Fe/AlOOH) and the formation of Fe0-Al2O3 metal-ceramic composites

Fe/AlOOH gels calcined and reduced at different temperatures have been investigated by a combined use of Mossbauer spectroscopy, x-ray diffraction, and electron microscopy in order to obtain information on the nature of the iron species formed as well as the various reduction processes. Calcination at or below 1070 K mainly gives reducible Fe3+ while calcination at higher temperatures gives substitutional Fe3+ in the form of Al2-xFexO3. The Fe3+ species in the calcined samples are, by and large, present in the form of small superparamagnetic particles. Crystallization of Al2O3 from the gels is catalyzed by Fe2O3 as well as FeAl2O4. Fe (20 wt. %)/AlOOH gels calcined at or below 870 K give FeAl2O4 when reduced in hydrogen at 1070 K or lower and a ferromagnetic Fe0-Al2O3 composite (with the metallic Fe particles >100 angstrom) when reduced at 1270 K. Samples calcined at 1220 K or higher give the Fe0-Al2O3 composite when reduced in the 870-12,70 K range, but a substantial proportion of Fe3+ remains unreduced in the form of Al2-xFexO3, showing thereby the extraordinary stability of substitutional Fe3+ to reduction even at high temperatures. Besides the ferromagnetic Fe0-Al2O3 composite, high-temperature reduction of Al2-xFexO3 yields a small proportion of superparamagnetic Fe0-Al2O3 wherein small metallic particles (<100 angstrom) are embedded in the ceramic matrix. In order to preferentially obtain the Fe0-Al2O3 composite on reduction, Fe/AlOOH gels should be calcined at low temperatures (less-than-or-equal-to 1100 K); high-temperature calcination results in Al2-xFexO3. Several modes of formation of FeAl2O4 are found possible during reduction of the gels, but a novel one is that involving the reaction, 2Fe3+ + Fe0 --> 3Fe2+.

Electronic structure origin of conductivity and oxygen reduction activity changes in low-level Cr-substituted (La, Sr)MnO3

The electronic structure of the (La0.8Sr0.2)(0.98)Mn1-xCrxO3 model series (x = 0, 0.05, or 0.1) was measured using soft X-ray synchrotron radiation at room and elevated temperature. O K-edge near-edge X-ray absorption fine structure (NEXAFS) spectra showed that low-level chromium substitution of (La, Sr)MnO3 resulted in lowered hybridisation between O 2p orbitals and M 3d and M 4sp valance orbitals. Mn L-3-edge resonant photoemission spectroscopy measurements indicated lowered Mn 3d-O 2p hybridisation with chromium substitution. Deconvolution of O K-edge NEXAFS spectra took into account the effects of exchange and crystal field splitting and included a novel approach whereby the pre-peak region was described using the nominally filled t(2g) up arrow state. 10% chromium substitution resulted in a 0.17 eV lowering in the energy of the t(2g) up arrow state, which appears to provide an explanation for the 0.15 eV rise in activation energy for the oxygen reduction reaction, while decreased overlap between hybrid O 2p-Mn 3d states was in qualitative agreement with lowered electronic conductivity. An orbital-level understanding of the thermodynamically predicted solid oxide fuel cell cathode poisoning mechanism involving low-level chromium substitution on the B-site of (La, Sr)MnO3 is presented. (C) 2015 AIP Publishing LLC.

ESTUDO DA CONCENTRAÇÃO DE BIOMASSSA DE MICROALGAS POR FILTRAÇÃO E FLOCULAÇÃO

O cultivo de microalgas é uma matéria prima para produção de biocombustível e de captura de carbono devido a vantagens como alta produção de biomassa e rápido crescimento quando comparado com outras fontes de energia e não necessitar de terra fértil. O presente trabalho teve como objetivo estudar métodos de concentração da biomassa. A microalga utilizada foi a Isochrysis galbana. Os cultivos tiveram duração de 20 dias e concentração inicial de 7.104 cel/mL no meio de cultivo F2/Guillard. e foram realizados em fotobioreatores de 500 mL, 3 L e 12 L. Os experimentos foram conduzidos em foto-período de 12 h claro/escuro, com temperatura de 27 a 29 C. Ao final dos cultivos, as amostras foram levadas para a sequência de processos de separação. Inicialmente, foram realizados ensaios de microfiltração em membrana com porosidade de 0,45 m em procedimento do tipo dead-end e constatou-se a rápida e intensa formação de camada de fouling. Acrescentou-se uma etapa de separação por floculação preliminar à microfiltração, utilizando-se Al2(SO4)3 como agente floculante. O meio coagulado foi então filtrado e microfiltrado. O estudo combinado das 3 etapas de separação possibilitou 99% de remoção de biomassa.O teor de óleo obtido foi de 22,4%. Portanto, o trabalho apresenta uma configuração de concentração da biomassa Isochrysis galbana visando o processo de produção de biocombustíveis

Nd：Y3Sc（1．5）Al（3．5）O（12）透明陶瓷的光谱性能以及激光输出

采用燃烧法制备了Nd：YSAG粉体,经过成型、素烧,最终在氢气气氛中烧结制备了Nd：YSAG透明陶瓷.测试结果表明,Nd：YSAG透明陶瓷具有荧光谱线较宽,荧光寿命较长的特点.激光实验得到的激光输出,斜率效率为23.6%,输出功率为0.36W,输出激光的谱线分布较宽.

Al2O3和Cr过渡层对Ag膜光学性质及其附着力的影响

研究了在玻璃基底上镀制Al2O3和Cr过渡层对Ag膜反射率及附着力的影响.分光光度计测试了Ag膜的反射率,结果表明,与Cr过渡层相比,Al2O3过渡层对Ag膜反射率的降低相对较小;而且,随着Al2O3厚度的增加,Ag膜的反射率先增大后减小.XRD与AES测试表明,引入Al2O3或Cr可明显细化Ag晶粒,减弱Ag膜（111）织构;Al2O3作过渡层时,Al原子向Ag层中扩散显著;而Cr作过渡层时,只有少量Cr原子扩散进入Ag层.因此,Al2O3作过渡层能显著增强薄膜与玻璃基体之间的附着力.

阻抗虚部计算聚合物电解质电导率

用交流阻抗法研究了 (PEO1 ) 1 0 LiClO4 Al2 O3和 (PEO2 ) 1 6 LiClO4 碳酸乙烯酯 (EC)两种复合聚合物电解质体系的电导率 ,给出了等效电路和各拟合元件的物理意义。当阻抗谱图发生严重变形时 ,提出一种比较简单的计算聚合物电解质电导率的方法———阻抗虚部最大值法

异丁烷-丁烯烷基化反应催化剂的研究Ⅳ.Zr(SO_4)_2和Zr(SO_4)_2/Al_2O_3(SiO_2)

制备了一系列不同焙烧温度的 Zr(SO4) 2 及 Zr(SO4) 2 负载量不同的 Zr(SO4) 2 / Al2 O3(Si O2 )固体强酸催化剂 ,用 XRD、IR、BET、TG- DTA、NH3- TPD、Hamm ett指示剂等方法研究了该催化体系的晶型、结构、比表面、酸量及酸强度随负载量和焙烧温度的变化规律 .将 Zr(SO4) 2 负载在 Al2 O3和 Si O2 两种载体上呈现不同的特性 .在 Al2 O3上明显地延缓了 Zr(SO4) 2 的分解和 Zr O2的晶相转变 .并且使酸量和酸强度有所提高 .研究了异丁烷 -丁烯烷基化反应 ,结果表明 ,对 973和 10 2 3K焙烧的 Zr(SO4) 2 样品 ,活性最好 ,而对 Zr(SO4) 2 / Al2 O3,负载量在 m(Zr(SO4) 2 ) /m(Al2 O3) =0 .5 / 1.0左右时活性最好 .各种样品均具有较高的 C08选择性.

聚环氧乙烷复合聚合物电解质/惰性电极交流阻抗谱的研究

制备了PEO LiClO4 Al2 O3及PEO LiClO4 碳酸乙烯酯 (EC)两种聚环氧乙烷(PEO)复合聚合物电解质 (SPE)薄膜 ,用不锈钢及铂两种惰性电极研究了聚合物电解质的交流阻抗特性 ,并对SPE/惰性电极的界面特性进行了研究 .提出了一种具有普适性的等效电路 ,发现电导率的测定与采用的惰性电极有关 .而且交流阻抗谱图与所加交流扰动幅度无关 ,但与直流极化电势有关 .EC含量的增加对低频直线的斜率也有影响.

常温一氧化碳气敏元件制备及气敏机理研究

介绍了以SnO2 为主 ,掺入Al2 O3 ,MgO ,InO ,Pd等添加剂的常温CO气敏元件的制备方法。根据其晶体结构特点对气敏机理进行了探讨。论述了传感器的信息传感机制 ,即晶界势垒控制和晶粒大小控制机制同时存在。为获得性能良好的气敏元件 ,需要最佳的制备方法和最好的添加剂