Public, private, or hybrid? What the upstream oil and gas industry can learn from other sectors about ‘the cloud’

Despite the compelling case for moving towards cloud computing, the upstream oil & gas industry faces several technical challenges—most notably, a pronounced emphasis on data security, a reliance on extremely large data sets, and significant legacy investments in information technology (IT) infrastructure—that make a full migration to the public cloud difficult at present. Private and hybrid cloud solutions have consequently emerged within the industry to yield as much benefit from cloud-based technologies as possible while working within these constraints. This paper argues, however, that the move to private and hybrid clouds will very likely prove only to be a temporary stepping stone in the industry’s technological evolution. By presenting evidence from other market sectors that have faced similar challenges in their journey to the cloud, we propose that enabling technologies and conditions will probably fall into place in a way that makes the public cloud a far more attractive option for the upstream oil & gas industry in the years ahead. The paper concludes with a discussion about the implications of this projected shift towards the public cloud, and calls for more of the industry’s services to be offered through cloud-based “apps.”

Natural free convection in porous media: First field documentation in groundwater

Natural free convection is a process of great importance in disciplines from hydrology to meteorology, oceanography, planetary sciences, and economic geology, and for applications in carbon sequestration and nuclear waste disposal. It has been studied for over a century - but almost exclusively in theoretical and laboratory settings, Despite its importance, conclusive primary evidence of free convection in porous media does not currently exist in a natural field setting. Here, we present recent electrical resistivity measurements from a sabkha aquifer near Abu Dhabi, United Arab Emirates, where large density inversions exist. The geophysical images from this site provide, for the first time, compelling field evidence of fingering associated with natural free convection in groundwater.

The law and policy for electricity generated by renewable energy: Greening the power in three Middle Eastern jurisdictions

This thesis examines the law and policy concerning renewable energy electricity generation in Palestine, Jordan, and Abu Dhabi. The thesis gives greater attention to the promotion of solar power owing to the abundance and viability. It appears that energy security profoundly underpins the utilisation of renewable electricity, and the motivation of climate change mitigation also pays a role in the promotion of renewable energy in these jurisdictions. However, current policies and regulations are not fully able to promote the renewables in the power sector. The thesis submits that reforms of law and policy are necessary to enhance the achievement of environmental and energy goals.

Performance analysis of 1200 kV ceramic disc insulator string under normal and faulted conditions

In the recent years there has been a considerable increase in demand for the electrical power requirement in our country. Presently the transmission system voltages has increased to 765 kV ac and 800kV dc, keeping in view of the future demand experimentation and simulation studies for 1200 kV ac and 1100kV dc transmission are under progress. In the present study an attempt is made to compute the surface potential, electric field across the string of ceramic disc insulators used for 1200kV ac systems. The studies are carried out under normal, polluted conditions and for the case of insulator string containing faulty discs. A computer code using surface charge simulation method (SCSM) is developed for the present analysis. Also a new technique which enhances the surface potential and electric field strength for the existing ceramic disc insulators is presented.

Computation of power released during corona treatment on polymeric insulators under ac and dc excitation

With increasing energy demand, it necessitates to generate and transmit the electrical power with minimal losses. High voltage power transmission is the most economical way of transmitting bulk power over long distances. Transmission insulator is one of the main components used as a mechanical support and to electrically isolate the conductor from the tower. Corona from the hardware and conductors can significantly affect the performance of the polymeric insulators. In the present investigation a methodology is presented to evaluate the corona performance of the polymeric shed material under different environment conditions for both ac and dc excitation. The results of the comprehensive analysis on various polymeric samples and the power released from the corona electrode for both the ac and dc excitation are presented. Some interesting results obtained from the chemical analysis confirmed the presence of nitric acid species on the treated sample which in long term will affect the strength of the insulator, also the morphological changes were found to be varying for different experimental conditions. (C) 2015 The Authors. Published by Elsevier Ltd.

Biodiesel Exhaust Treatment with HFAC Plasma supported by Red Mud: Study on DeNOx and power consumption

The concentration of Nitrogen Oxides (NOx) in engines which use biodiesel as fuel is higher compared to conventional diesel engine exhaust. In this paper, an attempt has been made to treat this exhaust using a combination of High frequency AC (HFAC) plasma and an industrial waste, Red Mud which shows proclivity towards Nitrogen dioxide (NO2) adsorption. The high frequency AC source in combination with the proposed compact double dielectric plasma reactors is relatively more efficient in converting Nitric Oxide (NO) to NO2. It has been shown that the plasma treated gas enhances the activity of red mud as an adsorbent/catalyst and about 60-72% NOx removal efficiency was observed at a specific energy of 250 J/L. The advantage in this method is the cost effectiveness and abundant availability of the waste red mud in the industry. Further, power estimation studies were carried out using Manley's equation for the two reactors employed in the experiment and a close agreement between experimental and predicted powers was observed. (C) 2015 The Authors. Published by Elsevier Ltd.

Aquaculture Asia, Vol.14, No.4, pp.1-52, October - December 2009

Sustainable aquaculture Peter Edwards writes on rural aquaculture Edwards, P. Mussel farming initiatives in North Kerala, India: A case of successful adoption of technology leading to rural livelihood transformation Laxmilatha, P., Thomas, S., Asokan, P.K., Surendranathan, V.G., Sivadasan, M.P., and Ramachandran, N.P. Selective study on the availability in indigenous fish species having ornamental value in some districts of West Bengal Panigrahi, A.K., Dutta, S. and Ghosh, I. Aquaculture livelihoods service centres in Aceh, Indonesia: A novel approach to improving the livelihoods of small scale fish farmers Ravikumar, B. and Yamamoto, K. Research and farming techniques e-Sagu Aqua - an innovative information and communication technology model for transfer of technology for aquaculture Vimala, D. D., Ravisankar, T., Mahalakshmi, P., and Kumaran, M. Freshwater pearl crop: an emerging enterprise in the Indian subcontinent Misra, G., Jena, J. and Kumar, K. Genetics and biodiversity Preliminary risk assessment of Pacific white leg shrimp (P. vannamei) introduced to Thailand for aquaculture Senanan, W., Panutrakul, S., Barnette, P., Chavanich, S., Mantachitr, V., Tangkrock-Olan, N., and Viyakarn, V. Farmer profile Aquatic animal health Asian fish health experts visit Australia Olsen, L. and Ingram, B. (Fisheries Victoria) Black gill disease of cage-cultured ornate rock lobster Panulirus ornatus in central Vietnam caused by Fusarium species Nha, V.V., Hoa, D.T. and Khoa, L.V. Marine Finfish Aquaculture Network Effects of the partial substitution fish oil by soybean oil in the diets on muscle fatty acid composition of juvenile cobia (Rachycentron canadum) Hung, P.D. and Mao, N.D. Growth response of cobia Rachycentron canadum (Pisces: Rachycentridae) under the hypersaline conditions of the Emirate of Abu Dhabi Yousif, O.M.*, Kumar, K.K. and Abdul-Rahman, A.F.A. NACA Newsletter

An overview of the current status of research into adopting high levels of renewables in Ireland

This paper provides an overview of the reduction targets that Ireland has set in the context of decarbonising their electricity generation through the use of renewables. The main challenges associated with integrating high levels (>20% of installed capacity) of non-dispatchable renewable generation are identified. The rising complexity of the challenge as renewable penetration levels increase is highlighted. A list of relevant research questions is then proposed, and an overview is given into the previous work that has gone into answering some of them. In particular, studies into the Irish energy market are identified, the current knowledge gap is described, and areas of necessary future research are suggested

UK Zero Carbon Homes 2016 - Exemplary Development

In October 2008 UK government announced very ambitious commitment to reduce greenhouse gas emissions of at least 34% by 2020 and by 80% by 2050 against a 1990 baseline. Consequently the government declares that new homes should be built to high environmental standards which means that from 2016 new homes will have to be built to a Zero Carbon standard. The paper sets out to present UK zero carbon residential development achieving the highest, Level 6 of Code for Sustainable Homes standard. Comprehensive information is provided about various environmental aspects of the housing development. Special attention is given to energy efficiency features of the houses and low carbon district heating solution which include biomass boiler, heat pumps, solar collectors and photovoltaic panels. The paper presents also challenges which designers and builders had to face delivering houses of the future.

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.

Chinese foreign direct investment in Latin America and the Caribbean: China-Latin America cross-council taskforce. Working document

Although Chinese corporations were relatively unknown in Latin America until a few years ago, their direct investments in the region have averaged about US$10 billion per year since 2010. Their presence and economic leverage have become very significant in many industries and countries of the region, but their motivation, strategy and procedures are not always well understood by Latin America’s governments, businesses and civil society. Similarly, Chinese companies still need to gain a better understanding of Latin America’s business environment and opportunities. This working document is an input for discussing the future of Chinese foreign direct investment (FDI) in Latin America at the China - Latin America cross-council taskforce at the Summit on the Global Agenda, to be held under the auspices of the World Economic Forum (WEF), in Abu Dhabi on 18-20 November 2013. It was prepared jointly by Taotao Chen, Professor of Finance of the School of Economics and Management of Tsinghua University in China and member of the WEF Global Agenda Council on China, and by Miguel Pérez Ludeña, Economic Affairs Officer at the Economic Commission for Latin America and the Caribbean (ECLAC), under the supervision of Alicia Bárcena, Executive Secretary of ECLAC and Vice-Chair of the WEF Global Agenda Council on Latin America.

Atlas of cancer mortality in the United Arab Emirates aided by application of geographic information system methods

The aim of this study was to determine cancer mortality rates for the United Arab Emirates (UAE) and to create an atlas of cancer mortality for the UAE. This atlas is the first of its kind in the Gulf country and the Middle East. Death certificates were reviewed for a period from January 1, 1990 to December 31, 1999 and cancer deaths were identified. Cancer mortality cases were verified by comparing with medical records. Age-adjusted cancer mortality rates were calculated by gender, emirate/medical district and nationality (UAE nationals and overall UAE population). Individual rates for each emirate were compared to the overall rate of the corresponding population for the same cancer site and gender. Age-adjusted rates were mapped using MapInfo software. High rates for liver, lung and stomach cancer were observed in Abu Dhabi, Dubai and the northern emirates, respectively. Rates for UAE nationals were greater compared to the overall UAE population. Several factors were suggested that may account for high rates of specific cancers observed in certain emirates. It is hoped that this atlas will provide leads that will guide further epidemiologic and public health activities aimed at preventing cancer. ^