Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Generalized linear mixed models for the genetic evaluation of binary reproductive traits: a simulation study

The objective of this study was to evaluate the use of probit and logit link functions for the genetic evaluation of early pregnancy using simulated data. The following simulation/analysis structures were constructed: logit/logit, logit/probit, probit/logit, and probit/probit. The percentages of precocious females were 5, 10, 15, 20, 25 and 30% and were adjusted based on a change in the mean of the latent variable. The parametric heritability (h²) was 0.40. Simulation and genetic evaluation were implemented in the R software. Heritability estimates (ĥ²) were compared with h² using the mean squared error. Pearson correlations between predicted and true breeding values and the percentage of coincidence between true and predicted ranking, considering the 10% of bulls with the highest breeding values (TOP10) were calculated. The mean ĥ² values were under- and overestimated for all percentages of precocious females when logit/probit and probit/logit models used. In addition, the mean squared errors of these models were high when compared with those obtained with the probit/probit and logit/logit models. Considering ĥ², probit/probit and logit/logit were also superior to logit/probit and probit/logit, providing values close to the parametric heritability. Logit/probit and probit/logit presented low Pearson correlations, whereas the correlations obtained with probit/probit and logit/logit ranged from moderate to high. With respect to the TOP10 bulls, logit/probit and probit/logit presented much lower percentages than probit/probit and logit/logit. The genetic parameter estimates and predictions of breeding values of the animals obtained with the logit/logit and probit/probit models were similar. In contrast, the results obtained with probit/logit and logit/probit were not satisfactory. There is need to compare the estimation and prediction ability of logit and probit link functions.

Sistema Híbrido de Inferência Baseado em Análise de Componentes Principais e Redes Neurais Artificiais Aplicado a Plantas de Processamento de Gás Natural

Nowadays, where the market competition requires products with better quality and a constant search for cost savings and a better use of raw materials, the research for more efficient control strategies becomes vital. In Natural Gas Processin Units (NGPUs), as in the most chemical processes, the quality control is accomplished through their products composition. However, the chemical composition analysis has a long measurement time, even when performed by instruments such as gas chromatographs. This fact hinders the development of control strategies to provide a better process yield. The natural gas processing is one of the most important activities in the petroleum industry. The main economic product of a NGPU is the liquefied petroleum gas (LPG). The LPG is ideally composed by propane and butane, however, in practice, its composition has some contaminants, such as ethane and pentane. In this work is proposed an inferential system using neural networks to estimate the ethane and pentane mole fractions in LPG and the propane mole fraction in residual gas. The goal is to provide the values of these estimated variables in every minute using a single multilayer neural network, making it possibly to apply inferential control techniques in order to monitor the LPG quality and to reduce the propane loss in the process. To develop this work a NGPU was simulated in HYSYS R software, composed by two distillation collumns: deethanizer and debutanizer. The inference is performed through the process variables of the PID controllers present in the instrumentation of these columns. To reduce the complexity of the inferential neural network is used the statistical technique of principal component analysis to decrease the number of network inputs, thus forming a hybrid inferential system. It is also proposed in this work a simple strategy to correct the inferential system in real-time, based on measurements of the chromatographs which may exist in process under study

Estimadores do tipo núcleo para Variávei s I.I.D. com espaço de estados geral

In this work, the paper of Campos and Dorea [3] was detailed. In that article a Kernel Estimator was applied to a sequence of random variables with general state space, which were independent and identicaly distributed. In chapter 2, the estimator´s properties such as asymptotic unbiasedness, consistency in quadratic mean, strong consistency and asymptotic normality were verified. In chapter 3, using R software, numerical experiments were developed in order to give a visual idea of the estimate process

Ajuste preventivo versus ajuste corretivo no controle on-line de processo do número de não-conformidades num item inspecionado

In production lines, the entire process is bound to unexpected happenings which may cost losing the production quality. Thus, it means losses to the manufacturer. Identify such causes and remove them is the task of the processing management. The on-line control system consists of periodic inspection of every month produced item. Once any of those items is quali ed as not t, it is admitted that a change in the fraction of the items occurred, and then the process is stopped for adjustments. This work is an extension of Quinino & Ho (2010) and has as objective main to make the monitoramento in a process through the control on-line of quality for the number of non-conformities about the inspected item. The strategy of decision to verify if the process is under control, is directly associated to the limits of the graphic control of non-conformities of the process. A policy of preventive adjustments is incorporated in order to enlarge the conforming fraction of the process. With the help of the R software, a sensibility analysis of the proposed model is done showing in which situations it is most interesting to execute the preventive adjustment

Evaluation of Pupillary Diameter in Preschool Children

Few quantitative data exist on pupil diameter, particularly in children. In this article we describe an analysis of pupil diameter and pupil area in normal preschool children during attentive gaze (AG) and spontaneous gaze (SG) using digital imaging. The pupil diameter and pupil area of 200 preschool children aged 4 to 6 years were evaluated. The images were recorded with a digital camera, transferred to a computer, processed by movie software and submitted to the Invert filter of Adobe Photoshop (R) software. Three consecutive measures of pupil diameter and pupil area were taken for both eyes during AG and SG. Arithmetic means of each parameter were calculated and data were expressed in millimeters. Mean pupil diameter was similar for both eyes, presenting values of 4.9 mm during AG and 4.1 mm during SG. Mean pupil area was also similar for both eyes, presenting values of 15.6 mm(2) and 9.1 mm(2) during AG and SG, respectively. There were no differences between boys and girls. However, 6-year-old children showed lower pupil diameter and area under both evaluation conditions.

Evaluation of Bone Insertion Level of Support Teeth in Class I Mandibular Removable Partial Denture Associated With an Osseointegrated Implant: A Study Using Finite Element Analysis

Purpose: This study evaluated the influence of distal extension removable partial denture associated with implant in cases of different bone level of abutment tooth, using 2D finite element analysis.Materials and Methods: Eight hemiarch models were simulated: model A-presenting tooth 33 and distal extension removable partial denture replacing others teeth, using distal rest connection and no bone lost; model B-similar to model A but presenting distal guide plate connection; model C-similar to model A but presenting osseointegrated implant with ERA retention system associated under prosthetic base; model D-similar to model B but presenting osseointegrated implant as described in model C; models E, F, G, and H were similar to models A, B, C, and D but presenting reduced periodontal support around tooth 33. Using ANSYS 9.0 software, the models were loaded vertically with 50 N on each cusp tip. For results, von Mises Stress Maps were plotted.Results: Maximum stress value was encountered in model G (201.023 MPa). Stress distribution was concentrated on implant and retention system. The implant/removable partial denture association decreases stress levels on alveolar mucosa for all models.Conclusions: Use of implant and ERA system decreased stress concentrations on supporting structures in all models. Use of distal guide plate decreased stress levels on abutment tooth and cortical and trabecular bone. Tooth apex of models with reduced periodontal support presented increased stress when using distal rest. (Implant Dent 2011;20:192-201)

The use of simulation for forecasting the number of docks necessary in an expedition department

The simulation is a very powerful tool to develop more efficient systems, hence it is been widely used with the goal of productivity improvement. Its results, if compared with other methods, are not always optimum; however, if the experiment is rightly elaborated, its results will represent the real situation, enabling its use with a good level of reliability. This work used the simulation (through the ProModel (R) software) in order to study, understand, model and improve the expenditure system of an enterprise, with a premise of keeping the production-delivery flow considering quick, controlled and reliable conditions.

Modelos lineares generalizados mistos na avaliação genética da prenhez precoce na raça Nelore

This study aimed to use the generalized linear models with probit and logit link function to evaluate early pregnancy, and to observe the effects on genetic variability and on sire selection when different ages are adopted in the definition of this trait. Early pregnancy was studied at 15 (EP15), and 21 (EP21) months. The analysis was done in R software. Pearson correlations (PC), between genetic predicted values and percentage of bulls in common considering only 10% of bulls with higher genetic values (TOP 10), between classification by logit and probit models and in each model among EP15 and EP21, were calculated. The heritability for EP15 and EP21 were close between models, except for EP15 using probit link function. PC and TOP10 among models were high. The Akaike and Bayesian criteria reported was similar between models. TOP10, considering the same model, among EP15-EP21 were moderated between EP15-EP21.

Estudo numérico para a determinação das pressões devidas a ação do vento em torres metálicas de seção circular

Pós-graduação em Engenharia Civil - FEIS

Análise estrutural de juntas rebitadas de uso aeronaútico

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelagem do crescimento e produção em povoamentos desbastados de Eucalyptus grandis

The aim of the study was to develop a system of growth and yield models for thinned stands of Eucalyptus spp.; and to assess the behavior of the growth in scenarios with 10% decrease or increase in rainfall. The probability distribution functions Weibull 2 and 3 parameters and Johnson SB for different methods were fitted. Correlation between the fitted parameters with age was evaluated. Dominant height growth behavior was evaluated to check if thinned stand changes its growth when compared to a non-thinned stands. The stand variables dominant height and basal area were projected and simultaneously predicted and projected, respectively. Individual tree equations were fitted, which were fitted as functions of stand level variables in order to decrease the error propagation. R software was used to fit all the proposed models and consequently all the fitted models were evaluated by their parameters significance (F-test) and graphs of predicted values in relation to the observed values around the 1:1 line. Thus, the prognosis system was made by two ways, first one using the full data set, and for the second one the dataset was restricted at age 7.5. Increase and decrease in 20% of rainfall were assessed by updating the site index function. Method of moments was the most precise to describe the diameter distribution for every age in eucalyptus stands for Johnson SB and Weibull 2 parameters pdfs. When observed for each pdf the correlation for their fitted parameters with age, we noticed that shape parameters for a thinned stand were no longer correlated with age, differently of non-thinned stands. Thus, thinning effect was accounted in the basal area prediction and projection modeling. This result emphasized the necessity of applying the Parameter Recovery method in order to assess differences and capture the right pattern for thinned and non-thinned stands in the future. Dominant height was not influenced by thinning intensity. Therefore the fitted Chapman-Richards model did not account for a stand being thinned or not. All the fitted equations behaved with good precision, no matter using full or precocious dataset. The prognosis system using full and/or precocious date set was evaluated for when using Parameter Recovery method for Sb and Weibull pdfs, and by then, graphical analysis and precision statistics showed appropriated results. Finally, the increase or decrease in rainfall regime were observed for eucalyptus stand yields and we may notice how important is to observe this effect, since the growth pattern is strictly affected by water.

Estudo numerico da convecção natural e forçada em cavidades tridimensionais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Epidemiologia genética em hanseníase: estudo de associação da região genômica candidata 6p21 e do gene TLR1

Pós-graduação em Doenças Tropicais - FMB

Modelagem em análise de sobrevivencia com eventos recorrentes aplicada a dados da área médica

Pós-graduação em Biometria - IBB