Simple sequence repeat markers associated with three quantitative trait loci for black point resistance can be used to enrich selection populations in bread wheat

Black point in wheat has the potential to cost the Australian industry $A30.4 million a year. It is difficult and expensive to screen for resistance, so the aim of this study was to validate 3 previously identified quantitative trait loci (QTLs) for black point resistance on chromosomes 2B, 4A, and 3D of the wheat variety Sunco. Black point resistance data and simple sequence repeat (SSR) markers, linked to the resistance QTLs and suited to high-throughput assay, were analysed in the doubled haploid population, Batavia (susceptible) × Pelsart (resistant). Sunco and Pelsart both have Cook in their pedigree and both have the Triticum timopheevii translocation on 2B. SSR markers identified for the 3 genetic regions were gwm319 (2B, T. timopheevii translocation), wmc048 (4AS), and gwm341 (3DS). Gwm319 and wmc048 were associated with black point resistance in the validation population. Gwm341 may have an epistatic influence on the trait because when resistance alleles were present at both gwm319 and wmc048, the Batavia-derived allele at gwm341 was associated with a higher proportion of resistant lines. Data are presented showing the level of enrichment achieved for black point resistance, using 1, 2, or 3 of these molecular markers, and the number of associated discarded resistant lines. The level of population enrichment was found to be 1.83-fold with 6 of 17 resistant lines discarded when gwm319 and wmc048 were both used for selection. Interactions among the 3 QTLs appear complex and other genetic and epigenetic factors influence susceptibility to black point. Polymorphism was assessed for these markers within potential breeding material. This indicated that alternative markers to wmc048 may be required for some parental combinations. Based on these results, marker-assisted selection for the major black point resistance QTLs can increase the rate of genetic gain by improving the selection efficiency and may facilitate stacking of black point resistances from different sources.

Firing characteristics of a simple coaxial triggeredva cuum gap

The firing and delay characteristics of a simple coaxial type of triggered vacuum gap (TVG) are described and compared with the planar type. The designs are new and differ from those reported earlier. By analogy with gaseous breakdown the statistical and formative time lags have been determined.

35Cl NQR in N3P3Cl4Ph2 and N3P3Cl4(NMe2)2

35Cl NQR has been investigated in two cyclotriphosphazene derivatives N3P3Cl4Ph2 and N3P3Cl4(NMe2)2. The observed frequencies are assigned to the various chlorines and the temperature variation of the NQR frequencies studied in the range from 77 K to 300 K. The results are analysed using the Bayer-Kushida-Brown approach. Torsional (librational) frequencies are found to fall in the range 10–25 cm−1 and are found to be only slightly temperature dependent.

Life events and social support among patients with major depressive disorder

The study is part of a research project of 269 psychiatric patients with major depression, Vantaa Depression Study, in the Department of Mental Health and Alcohol Research of the National Public Health Institute and the Department of Psychiatry of the Peijas Medical Care District. The aim was to study at the onset of MDE psychosocial differences in subgroups of patients and clustering of events into time before depression and its prodromal phase, to study whether more severe life events and less social support predict poorer outcome in all patients, but most among those currently in partial remission, whether social support declines as a consequence of time spent in MDE, is sensitive to improvement, and whether social support is influenced by neuroticism and extraversion. After screening, a semistructured interview (SCAN, version 2.0) was used for the presence of DSM-IV MDE, and other psychiatric diagnoses. Life events and social support were studied with semistructured methods (IRLE, Paykel 1983; IMSR, Brugha et al. 1987), perceived social support and neuroticism/extraversion with questionnaires (PSSS-R, Blumenthal et al. 1987; EPI, Eysenck and Eysenck 1964) at baseline, 6 and 18 months. At the onset of depression life events were common. No major differences between subgroups of patients were found; the younger had more events, whereas those with comorbid alcoholism and personality disorders perceived less support. Although events were distributed evenly between the time before depression, the prodromal phase and the index MDE, two thirds of the patients attributed their depression to some life event. Adversities and poor perceived support influenced the outcome of all psychiatric patients, most in the subgroup of full remission. In the partial remission group, the impact of severe events and in the MDE, perceived support was important. Low objective and subjective support were predicted by longer time spent in MDE. Along with improvement subjective support improved. Neuroticism and extraversion were associated with the size of social network and perceived support and predicted change of perceived support. In conclusion, adversities were common in all phases of depression. They may thus have many roles; before depression they may precipitate it, in the prodromal phase worsen symptoms, and during the MDE, the outcome of depression. Patients often attributed their depression to a life event. Psychosocial subgroup differences were quite small. Perceived support predicted the outcome of depression, and time spent in MDE objective and subjective support. Neuroticism and extraversion may modify the level and change particularly in perceived support, thereby indirectly effecting vulnerability to depression.

Chronic disease risks and use of a smartphone application during a physical activity and dietary intervention in Australian truck drivers

- Objective This study examined chronic disease risks and the use of a smartphone activity tracking application during an intervention in Australian truck drivers (April-October 2014). - Methods Forty-four men (mean age=47.5 [SD 9.8] years) completed baseline health measures, and were subsequently offered access to a free wrist-worn activity tracker and smartphone application (Jawbone UP) to monitor step counts and dietary choices during a 20-week intervention. Chronic disease risks were evaluated against guidelines; weekly step count and dietary logs registered by drivers in the application were analysed to evaluate use of the Jawbone UP. - Results Chronic disease risks were high (e.g. 97% high waist circumference [≥94 cm]). Eighteen drivers (41%) did not start the intervention; smartphone technical barriers were the main reason for drop out. Across 20-weeks, drivers who used the Jawbone UP logged step counts for an average of 6 [SD 1] days/week; mean step counts remained consistent across the intervention (weeks 1–4=8,743[SD 2,867] steps/day; weeks 17–20=8,994[SD 3,478] steps/day). The median number of dietary logs significantly decreased from start (17 [IQR 38] logs/weeks) to end of the intervention (0 [IQR 23] logs/week; p<0.01); the median proportion of healthy diet choices relative to total diet choices logged increased across the intervention (weeks 1–4=38[IQR 21]%; weeks 17–20=58[IQR 18]%). - Conclusions Step counts were more successfully monitored than dietary choices in those drivers who used the Jawbone UP. - Implications Smartphone technology facilitated active living and healthy dietary choices, but also prohibited intervention engagement in a number of these high-risk Australian truck drivers.

Methodological issues with older users as research participants

Researching with older participants presents many unique methodological challenges. One of the reasons for this is the greater variability in abilities among older than among younger people. Thus, the standard practice in user research of assuming homogeneity in a certain demographic group may not work with older adults. Designing experiments for users with diverse capabilities is challenging and calls for re-examination of existing experimental design methods. In this paper we will share our experience in researching with people with diverse capabilities and present its implications and possible way to address them.

Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets

This paper investigates numerically the heat transfer characteristics of confined slot jet impingement on a pin-fin heat sink. A variety of pin-fin heat sinks is investigated, and the resulting enhancement of heat transfer studied. The distribution of heat transfer coefficient on the top surface of the base plate and that along the fin height are examined. Both steady and pulsated jets are studied. It is observed that for a steady jet impingement on a pin-fin heat sink, the effective heat transfer coefficient increases with fin height, leading to a corresponding decrease in base plate temperature for the same heat flux. In the case of pulsated jets, the influence of pulse frequency and the Reynolds number is examined, and their effect on the effective heat transfer coefficient is studied.

Search for chaos in neutron star systems: Is Cyg X-3 a black hole?

The accretion disk around a compact object is a nonlinear general relativistic system involving magnetohydrodynamics. Naturally, the question arises whether such a system is chaotic (deterministic) or stochastic (random) which might be related to the associated transport properties whose origin is still not confirmed. Earlier, the black hole system GRS 1915+105 was shown to be low-dimensional chaos in certain temporal classes. However, so far such nonlinear phenomena have not been studied fairly well for neutron stars which are unique for their magnetosphere and kHz quasi-periodic oscillation (QPO). On the other hand, it was argued that the QPO is a result of nonlinear magnetohydrodynamic effects in accretion disks. If a neutron star exhibits chaotic signature, then what is the chaotic/correlation dimension? We analyze RXTE/PCA data of neutron stars Sco X-1 and Cyg X-2, along with the black hole Cyg X-1 and the unknown source Cyg X-3, and show that while Sco X-1 and Cyg X-2 are low dimensional chaotic systems, Cyg X-1 and Cyg X-3 are stochastic sources. Based on our analysis, we argue that Cyg X-3 may be a black hole.

Analytical modelling of integrated solar drying system

The drying of fruit and vegetables is a subject of great importance. Dried fruit and vegetables have gained commercial importance, and their growth on a commercial scale has become an important sector of the agricultural industry. However, food drying is one of the most energy intensive processes of the major industrial process and accounts for up to 15 % of all industrial energy usage. Due to increasingly high electricity prices and environmental concern, a dryer using traditional energy sources is not a feasible option anymore. Therefore, an alternative/renewable energy source is needed. In this regard, an integrated solar drying system that includes highly efficient double-pass counter flow v-groove solar collector, conical-shaped rock-bed thermal storage, auxiliary heater, the centrifugal fan and the drying chamber has been designed and constructed. Mathematical model for all the individual components as well as an integrated model combining all components of the drying system has been developed. Mathematical equations were solved using MATLAB program. This paper presents the analytical model and key finding of the simulation.

Dimethyl sulphoxide and dimethyl formamide complexes of Mn(III) perchlorate

Dimethyl sulphoxide (DMSO) and dimethyl formamide (DMF) complexes of Mn(III) perchlorate have been prepared and their conductivity, magnetic susceptibility and i.r. and electronic spectra studied. The complexes behave as uni-trivalent electrolytes in acetonitrile. Their magnetic moments of 5·1 B.M. show them to be of high spin type. Infra-red spectra show that oxygen is the donor atom in both complexes. The spin allowed electronic transition for d4 system, around 20,000 cm−1, ascribable to the 5Eg → 5T2g transition, suggests an octahedral configuration for these complexes

Drop formation studies in liquid—liquid systems

Benzene drops were formed in continuous media of water and glycerine of varying physical properties. The effect on drop volumes of variables like volumetric flow-rate, interfacial tension, continuous phase viscosity and capillary diameter was studied. An equation has been developed, based on a two stage drop formation mechanism, which predicts drop volumes within an average error of 7 per cent for the range of physical properties employed in this investigation.

A dragonfly inspired flapping wing actuated by electro active polymers

An energy-based variational approach is used for structural dynamic modeling of the IPMC (Ionic Polymer Metal Composites) flapping wing. Dynamic characteristics of the wing are analyzed using numerical simulations. Starting with the initial design, critical parameters which have influence on the performance of the wing are identified through parametric studies. An optimization study is performed to obtain improved flapping actuation of the IPMC wing. It is shown that the optimization algorithm leads to a flapping wing with dimensions similar to the dragonfly Aeshna Multicolor wing. An unsteady aerodynamic model based on modified strip theory is used to obtain the aerodynamic forces. It is found that the IPMC wing generates sufficient lift to support its own weight and carry a small payload. It is therefore a potential candidate for flapping wing of micro air vehicles.

Structure-Reactivity Correlations of Benzoin Alkyl Ethers. Structures of 2-Methoxy-1,2-diphenylethanone (I) and 2-Isopropoxy-1,2-diphenylethanone (II)

(I): C15H1402, Mr---226.27, triclinic, Pi,a=8.441 (2), b= 10.276 (1), c= 15.342 (2)A, a=91.02 (2), ~ t= 79.26 (2), y= 105.88 (2) °, V=1256.8 (4)A 3, Z=4, D,,= 1.209 (flotation in KI),D x - 1.195 g cm -3, #(Mo, 2 = 0.7107/~) = 0.44 cm -~,F(000) = 480, T= 293 K, R -- 0.060 for 1793 significant reflections. (II): C~THlsO2, Mr= 254.83, orthorhombic, Pca21, a=8.476 (1); b= 16.098 (3), c=10.802(3)A, V=1473.9 (5) A s, Z=4, Dm=1.161 (flotation in KI), Dx= 1.148gem -3, /~(Mo, 2=0.7107 A) =0.41 cm -~, F(000) = 544, T= 293 K, R = 0.071 for 867 significant reflections. Both (I) and (II) crystallize in a cisoid conformation for the carbonyl group and alkoxy groups. Compounds (I) and (II) are photostable on irradiation in the solid state in spite of the favourable conformation of the functional groups for intramolecular H abstraction. Absence of photoreaction of (I)and (II) in the solid state is rationalized in the light of unfavourable intramolecular geometry.

Miniature Compliant Grippers With Vision-Based Force Sensing

This paper is concerned with grasping biological cells in aqueous medium with miniature grippers that can also help estimate forces using vision-based displacement measurement and computation. We present the design, fabrication, and testing of three single-piece, compliant miniature grippers with parallel and angular jaw motions. Two grippers were designed using experience and intuition, while the third one was designed using topology optimization with implicit manufacturing constraints. These grippers were fabricated using different manufacturing techniques using spring steel and polydimethylsiloxane ( PDMS). The grippers also serve the purpose of a force sensor. Toward this, we present a vision-based force-sensing technique by solving Cauchy's problem in elasticity using an improved algorithm. We validated this technique at the macroscale, where there was an independent method to estimate the force. In this study, the gripper was used to hold a yeast ball and a zebrafish egg cell of less than 1 mm in diameter. The forces involved were estimated to be about 30 and 10 mN for the yeast ball and the zebrafish egg cell, respectively.

Actuarial report 2011: Social security schemes administered by Kela 2010-2060

Projections concerning the long-term outlook of the social security schemes administered by the Social Insurance Institution of Finland (Kela) are made regularly by the Institution’s Actuarial Section. The report at hand was compiled with the help of an aggregate model devised by the Actuarial Section. In the model, various universal factors influencing benefit trends are consolidated and the interactions between individual benefits are taken into account. The demographic forecasts underlying the report have also been made by the Actuarial Section. Estimates of income and administrative costs have been made in cooperation with the Financial Planning Section.