Length of the Mitral Isthmus But Not Anatomical Location of Ablation Line Predicts Bidirectional Mitral Isthmus Block in Patients Undergoing Catheter Ablation of Persistent Atrial Fibrillation: A Randomized Controlled Trial.

INTRODUCTION: Mitral isthmus (MI) ablation is an effective option in patients undergoing ablation for persistent atrial fibrillation (AF). Achieving bidirectional conduction block across the MI is challenging, and predictors of MI ablation success remain incompletely understood. We sought to determine the impact of anatomical location of the ablation line on the efficacy of MI ablation. METHODS AND RESULTS: A total of 40 consecutive patients (87% male; 54 ± 10 years) undergoing stepwise AF ablation were included. MI ablation was performed in sinus rhythm. MI ablation was performed from the left inferior PV to either the posterior (group 1) or the anterolateral (group 2) mitral annulus depending on randomization. The length of the MI line (measured with the 3D mapping system) and the amplitude of the EGMs at 3 positions on the MI were measured in each patient. MI block was achieved in 14/19 (74%) patients in group 1 and 15/21 (71%) patients in group 2 (P = NS). Total MI radiofrequency time (18 ± 7 min vs. 17 ± 8 min; P = NS) was similar between groups. Patients with incomplete MI block had a longer MI length (34 ± 6 mm vs. 24 ± 5 mm; P < 0.001), a higher bipolar voltage along the MI (1.75 ± 0.74 mV vs. 1.05 ± 0.69 mV; P < 0.01), and a longer history of continuous AF (19 ± 17 months vs. 10 ± 10 months; P < 0.05). In multivariate analysis, decreased length of the MI was an independent predictor of successful MI block (OR 1.5; 95% CI 1.1-2.1; P < 0.05). CONCLUSIONS: Increased length but not anatomical location of the MI predicts failure to achieve bidirectional MI block during ablation of persistent AF.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Eyes Of Darwin : une fenêtre ouverte sur l'évolution du logiciel

De nos jours, les logiciels doivent continuellement évoluer et intégrer toujours plus de fonctionnalités pour ne pas devenir obsolètes. C'est pourquoi, la maintenance représente plus de 60% du coût d'un logiciel. Pour réduire les coûts de programmation, les fonctionnalités sont programmées plus rapidement, ce qui induit inévitablement une baisse de qualité. Comprendre l’évolution du logiciel est donc devenu nécessaire pour garantir un bon niveau de qualité et retarder le dépérissement du code. En analysant à la fois les données sur l’évolution du code contenues dans un système de gestion de versions et les données quantitatives que nous pouvons déduire du code, nous sommes en mesure de mieux comprendre l'évolution du logiciel. Cependant, la quantité de données générées par une telle analyse est trop importante pour être étudiées manuellement et les méthodes d’analyses automatiques sont peu précises. Dans ce mémoire, nous proposons d'analyser ces données avec une méthode semi automatique : la visualisation. Eyes Of Darwin, notre système de visualisation en 3D, utilise une métaphore avec des quartiers et des bâtiments d'une ville pour visualiser toute l'évolution du logiciel sur une seule vue. De plus, il intègre un système de réduction de l'occlusion qui transforme l'écran de l'utilisateur en une fenêtre ouverte sur la scène en 3D qu'il affiche. Pour finir, ce mémoire présente une étude exploratoire qui valide notre approche.

Multimodal image fusion of anatomical structures for diagnosis, therapy planning and assistance

This paper provides an overview of work done in recent years by our research group to fuse multimodal images of the trunk of patients with Adolescent Idiopathic Scoliosis (AIS) treated at Sainte-Justine University Hospital Center (CHU). We first describe our surface acquisition system and introduce a set of clinical measurements (indices) based on the trunk's external shape, to quantify its degree of asymmetry. We then describe our 3D reconstruction system of the spine and rib cage from biplanar radiographs and present our methodology for multimodal fusion of MRI, X-ray and external surface images of the trunk We finally present a physical model of the human trunk including bone and soft tissue for the simulation of the surgical outcome on the external trunk shape in AIS.

The Individual is Nothing, the Class Everything: Psychophysics and Modeling of Recognition in Obect Classes

Most psychophysical studies of object recognition have focussed on the recognition and representation of individual objects subjects had previously explicitely been trained on. Correspondingly, modeling studies have often employed a 'grandmother'-type representation where the objects to be recognized were represented by individual units. However, objects in the natural world are commonly members of a class containing a number of visually similar objects, such as faces, for which physiology studies have provided support for a representation based on a sparse population code, which permits generalization from the learned exemplars to novel objects of that class. In this paper, we present results from psychophysical and modeling studies intended to investigate object recognition in natural ('continuous') object classes. In two experiments, subjects were trained to perform subordinate level discrimination in a continuous object class - images of computer-rendered cars - created using a 3D morphing system. By comparing the recognition performance of trained and untrained subjects we could estimate the effects of viewpoint-specific training and infer properties of the object class-specific representation learned as a result of training. We then compared the experimental findings to simulations, building on our recently presented HMAX model of object recognition in cortex, to investigate the computational properties of a population-based object class representation as outlined above. We find experimental evidence, supported by modeling results, that training builds a viewpoint- and class-specific representation that supplements a pre-existing repre-sentation with lower shape discriminability but possibly greater viewpoint invariance.

Mineração de dados em triagem neonatal de hemoglobinopatias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biometry and fetal weight estimation by two-dimensional and three-dimensional ultrasonography: an intraobserver and interobserver reliability and agreement study

Objective To evaluate and compare the intraobserver and interobserver reliability and agreement for the biparietal diameter (BPD), abdominal circumference (AC), femur length (FL) and estimated fetal weight (EFW) obtained by two-dimensional ultrasound (2D-US) and three-dimensional ultrasound (3D-US). Methods Singleton pregnant women between 24 and 40 weeks were invited to participate in this study. They were examined using 2D-US in a blinded manner, twice by one observer, intercalated by a scan by a second observer, to determine BPD, AC and FL. In each of the three examinations, three 3D-US datasets (head, abdomen and thigh) were acquired for measurements of the same parameters. We determined EFW using Hadlock's formula. Systematic errors between 3D-US and 2D-US were examined using the paired t-test. Reliability and agreement were assessed by intraclass correlation coefficients (ICCs), limits of agreement (LoA), SD of differences and proportion of differences below arbitrary points. Results We evaluated 102 singleton pregnancies. No significant systematic error between 2D-US and 3D-US was observed. The ICC values were higher for 3D-US in both intra- and interobserver evaluations; however, only for FL was there no overlap in the 95% CI. The LoA values were wider for 2D-US, suggesting that random errors were smaller when using 3D-US. Additionally, we observed that the SD values determined from 3D-US differences were smaller than those obtained for 2D-US. Higher proportions of differences were below the arbitrarily defined cut-off points when using 3D-US. Conclusion 3D-US improved the reliability and agreement of fetal measurements and EFW compared with 2D-US.

Entwicklung eines pharmakologischen Modells zur Prüfung immuntherapeutischer Antikörper mit dreidimensionalen Tumorzellkulturen in vitro

In den letzten Jahren hat die Tumorbehandlung mit immunologischen Präparaten an Bedeutung gewonnen. Der allgemeine Ablauf der Testung eines Arzneimittelkandidaten sieht vor, zunächst in Zellkulturversuchen und Tierversuchen Wirkweise und Sicherheit, sowie voraussichtliche Abbauwege und mögliche Gefahren so beurteilen zu können, dass sie für einen Einsatz im Menschen in Frage kommen. Zur präklinischen in vitro-Testung werden dabei in der Regel Monolayer-Zellkulturen oder Einzelzellsuspensionen eingesetzt. Der Einsatz von 3D-Zellkulturmodellen, welche den Aufbau von Mikrometastasen oder intervaskuläre Areale in Tumoren exakter widerspiegeln, führt zu wesentlich besseren Voraussagen bezüglich der klinischen Wirksamkeit neuer Präparate. Das Ziel dieser Arbeit war daher die Entwicklung und Anwendung eines neuen 3D-Zellkulturbasierten Systems zur Testung trifunktionaler bispezifischer Antikörper für die Tumorbehandlung, welches sich auch auf andere vergleichbare Präparate übertragen lässt.rnIn meiner Arbeit konnte ich mehrere humane Tumorzelllinien definieren, mit denen es gelang, stabile Co-Kulturen von Multi Cellular Tumour Spheroids (MCTS) mit Peripheral Blood Mononuclear Cells (PBMC) in miniaturisierten Spinner-Flaschen zu etablieren. Spinner-Flaschen, in denen die im Kulturmedium befindlichen Immunzellen, MCTS und Therapeutika ständig frei zirkulieren, sind besonders für eine wirklichkeitsnahe Nachbildung der in vivo-Simulation mit disseminierten Tumorzellen oder mit malignem Aszites geeignet. Diese Art der Kultivierung erlaubte Beobachtungszeiten von ≥20 Tagen für eine große Bandbreite Analysemethoden. Zu den mit dem erstellten Protokoll standardmäßig durchführbaren Analysemethoden zählen unter anderem immunhistochemische Färbungen an Sphäroid-Gefrierschnitten, Vitalitätstest, Untersuchung der Plattierungs-Effizienz, Bestimmung der Sphäroidvolumina, Zytokinbestimmungen aus dem Medienüberstand mit Cytokine Bead Arrays, PCR-Analysen immunzellspezifischer Antigene, sowie durchflusszytometrische Analysen. Diese Methodenkombination erlaubt einen sehr detaillierten Einblick in die Wirkweise und Effizienz neuer Immuntherapeutika aus verschiedensten Blickwinkeln und stellt ein reproduzierbares Testsystem zur präklinischen Testung von Immuntherapeutika dar, das zukünftig als Bindeglied zwischen Monolayer-Zellkulturen und klinischen Prüfungen einen festen Platz einnehmen könnte.rnMit dem beschriebenen 3D-Zellkultur-System wurden in der vorliegenden Arbeit die trifunktionalen bispezifischen Antikörper catumaxomab (unter dem Handelsnamen Removab® für die Behandlung maligner Ascites zugelassen) und ertumaxomab (derzeit in klinischen Prüfungen) hinsichtlich ihrer Wirkweise untersucht. Die Antikörper besitzen im Gegensatz zu herkömmlichen monoklonalen Antikörpern zwei verschiedene Bindungsarme, einer gegen CD3 auf T-Zellen, der zweite gegen EpCAM respektive Her2/neu - beides weit verbreitete Tumorantigene - gerichtet. An ihrem Fc-Teil besitzen sie eine dritte Bindungskapazität, über welche sie an Fcγ RI, -IIa und -III positive akzessorische Zellen binden. Diese Kombination ermöglicht theoretisch die Ausbildung eines Tri-Zell-Komplexes aus T-Zelle, Tumorzelle und akzessorischer Zelle. Dies stellt eine wirkungsvolle Therapieoption unter Ausnutzung der körpereigenen, immunologischen Abwehr dar. rnIm Rahmen dieser Arbeit wurde gezeigt, dass beide Antikörper eine Größenreduktion der Sphäroide mit den entsprechenden Tumorantigenen in gleichem Maße bewirkten und die Plattierungseffizienz durch ertumaxomab dosisabhängig reduziert wurde. Mit dem erstellten Testsystem konnte der Wirkmechanismus von catumaxomab auf Sphäroide der Zelllinie FaDu (Kopf-Hals-Plattenepithelkarzinom) detaillierter gezeigt werden: catumaxomab wirkte dosisabhängig auf die Reduktion der Sphäroidvolumina und die zunehmende Infiltration von CD45+ Zellen, die als T-, NK- und/oder dendritische Zellen identifiziert wurden. Des Weiteren rief die catumaxomab-Gabe eine verstärkte Ausschüttung der Zytokine IL-2, IFN-γ und TNF-α hervor. Diese Ergebnisse sprechen dafür, dass catumaxomab die zelluläre Immunantwort aktiviert.rnDie Standard-Tumorbehandlung beinhaltet die Gabe von Chemotherapeutika. Oft werden dafür Zytostatika mit dem unerwünschten Nebeneffekt auch gesunde proliferierende Zellen anzugreifen verwendet. Dies kann prinzipiell auch die Wirksamkeit der Antikörper-Therapie beeinflussen. Aus diesem Grund wurden in dieser Arbeit zusätzlich vergleichende Kombinations-Versuche mit catumaxomab und einem gängigen Zytostatikum - Cisplatin - durchgeführt. Mit Untersuchungen der Sphäroidvolumina, Vitalitätstests und Plattierungseffizienz konnte gezeigt werden, dass die Wirkung von catumaxomab bei gleichzeitiger Anwendung beider Therapeutika aufrecht erhalten bleibt und diese sogar additiv verstärkt wird. Eine Kombinationstherapie im Menschen ist daher denkbar.rnrn

Use of straight and curved 3-dimensional titanium miniplates for fracture fixation at the mandibular angle

PURPOSE: The aim of this follow-up study was to evaluate the clinical usefulness of a new type of 3-dimensional (3D) miniplate for open reduction and monocortical fixation of mandibular angle fractures. PATIENTS AND METHODS: In 20 consecutive patients, noncomminuted mandibular angle fractures were treated with open reduction and fixation using a 2 mm 3D miniplate system in a transoral approach. All patients were systematically monitored until 6 months postoperatively. Among the outcome parameters recorded were infection, hardware failure, wound dehiscence, and sensory disturbance of the inferior alveolar nerve. RESULTS: The mean operation time from incision to wound closure was 65 minutes. Two patients had a mucosal wound dehiscence with no consequences. None developed an infection requiring a plate removal. All but 2 patients had normal sensory function 3 months after surgery. Plate fracture occurred in one patient in whom a preceding surgical removal of the third molar had been the reason for the mandibular fracture. In the absence of clinical symptoms, the patient declined plate removal. On final follow-up, fracture healing was considered clinically complete in all patients. CONCLUSIONS: The 3D plating system described here is suitable for fixation of simple mandibular angle fractures and is an easy-to-use alternative to conventional miniplates. The system may be contraindicated in patients in whom insufficient interfragmentary bone contact causes minor stability of the fracture.

Impact Study of Nonverbal Facial Cues on Spontaneous Chatting with Virtual Humans

Non-verbal communication (NVC) is considered to represent more than 90 percent of everyday communication. In virtual world, this important aspect of interaction between virtual humans (VH) is strongly neglected. This paper presents a user-test study to demonstrate the impact of automatically generated graphics-based NVC expression on the dialog quality: first, we wanted to compare impassive and emotion facial expression simulation for impact on the chatting. Second, we wanted to see whether people like chatting within a 3D graphical environment. Our model only proposes facial expressions and head movements induced from spontaneous chatting between VHs. Only subtle facial expressions are being used as nonverbal cues - i.e. related to the emotional model. Motion capture animations related to hand gestures, such as cleaning glasses, were randomly used to make the virtual human lively. After briefly introducing the technical architecture of the 3D-chatting system, we focus on two aspects of chatting through VHs. First, what is the influence of facial expressions that are induced from text dialog? For this purpose, we exploited an emotion engine extracting an emotional content from a text and depicting it into a virtual character developed previously [GAS11]. Second, as our goal was not addressing automatic generation of text, we compared the impact of nonverbal cues in conversation with a chatbot or with a human operator with a wizard of oz approach. Among main results, the within group study -involving 40 subjects- suggests that subtle facial expressions impact significantly not only on the quality of experience but also on dialog understanding.

NHERF1 – New Modifier of Colorectal Cancer Progression

Colorectal cancer (CRC) develops from multiple progressive modifications of normal intestinal epithelium into adenocarcinoma. Loss of cell polarity has been implicated as an early event in this process, but the molecular players involved are not well known. NHERF1 (Na+/H+ Exchanger Regulatory Factor 1) is an adaptor protein with apical membrane localization in polarized epithelia. In this study, we tested our hypothesis that NHERF1 plays a role in CRC. We examined surgical CRC resection specimens for changes in NHERF1 expression, and modeled these changes in two- and three-dimensional (2D and 3D) Caco-2 CRC cell systems. NHERF1 had significant alterations from normal to adenoma and carcinoma transitions (2=38.5, d.f.=4, P<0.001), displaying apical membrane localization in normal tissue but loss of expression in adenoma and ectopic overexpression in carcinoma. In Caco-2 cell models, NHERF1 depletion induced epithelial-mesenchymal-transition in 2D cell monolayers and disruption of apical-basal polarity in 3D cyst system. The mesenchymal phenotype of NHERF1-depleted cells was fully restored by re-expression of NHERF1 at the apical membrane. Cytoplasmic and nuclear NHERF1 re-expression not only failed to restore the epithelial phenotype but led to more aggressive phenotypes. Our findings suggest that membrane NHERF1 is an important regulator of epithelial morphogenesis, and that changes in NHERF1 expression correlate with CRC progression. NHERF1 loss and ectopic expression that induce massive disruption of epithelial cell polarity may, thereby, mark important steps in CRC development.

Postmortem MR quantification of the heart for characterization and differentiation of ischaemic myocardial lesions.

OBJECTIVES Recently, an MRI quantification sequence has been developed which can be used to acquire T1- and T2-relaxation times as well as proton density (PD) values. Those three quantitative values can be used to describe soft tissue in an objective manner. The purpose of this study was to investigate the applicability of quantitative cardiac MRI for characterization and differentiation of ischaemic myocardial lesions of different age. MATERIALS AND METHODS Fifty post-mortem short axis cardiac 3 T MR examinations have been quantified using a quantification sequence. Myocardial lesions were identified according to histology and appearance in MRI images. Ischaemic lesions were assessed for mean T1-, T2- and proton density values. Quantitative values were plotted in a 3D-coordinate system to investigate the clustering of ischaemic myocardial lesions. RESULTS A total of 16 myocardial lesions detected in MRI images were histologically characterized as acute lesions (n = 8) with perifocal oedema (n = 8), subacute lesions (n = 6) and chronic lesions (n = 2). In a 3D plot comprising the combined quantitative values of T1, T2 and PD, the clusters of all investigated lesions could be well differentiated from each other. CONCLUSION Post-mortem quantitative cardiac MRI is feasible for characterization and discrimination of different age stages of myocardial infarction. KEY POINTS • MR quantification is feasible for characterization of different stages of myocardial infarction. • The results provide the base for computer-aided MRI cardiac infarction diagnosis. • Diagnostic criteria may also be applied for living patients.

Length of the Mitral Isthmus But Not Anatomical Location of Ablation Line Predicts Bidirectional Mitral Isthmus Block in Patients Undergoing Catheter Ablation of Persistent Atrial Fibrillation: A Randomized Controlled Trial

INTRODUCTION Mitral isthmus (MI) ablation is an effective option in patients undergoing ablation for persistent atrial fibrillation (AF). Achieving bidirectional conduction block across the MI is challenging, and predictors of MI ablation success remain incompletely understood. We sought to determine the impact of anatomical location of the ablation line on the efficacy of MI ablation. METHODS AND RESULTS A total of 40 consecutive patients (87% male; 54 ± 10 years) undergoing stepwise AF ablation were included. MI ablation was performed in sinus rhythm. MI ablation was performed from the left inferior PV to either the posterior (group 1) or the anterolateral (group 2) mitral annulus depending on randomization. The length of the MI line (measured with the 3D mapping system) and the amplitude of the EGMs at 3 positions on the MI were measured in each patient. MI block was achieved in 14/19 (74%) patients in group 1 and 15/21 (71%) patients in group 2 (P = NS). Total MI radiofrequency time (18 ± 7 min vs. 17 ± 8 min; P = NS) was similar between groups. Patients with incomplete MI block had a longer MI length (34 ± 6 mm vs. 24 ± 5 mm; P < 0.001), a higher bipolar voltage along the MI (1.75 ± 0.74 mV vs. 1.05 ± 0.69 mV; P < 0.01), and a longer history of continuous AF (19 ± 17 months vs. 10 ± 10 months; P < 0.05). In multivariate analysis, decreased length of the MI was an independent predictor of successful MI block (OR 1.5; 95% CI 1.1-2.1; P < 0.05). CONCLUSIONS Increased length but not anatomical location of the MI predicts failure to achieve bidirectional MI block during ablation of persistent AF.

Agent-based modelling for cement hydration

The Agent-Based Modelling and simulation (ABM) is a rather new approach for studying complex systems withinteracting autonomous agents that has lately undergone great growth in various fields such as biology, physics, social science, economics and business. Efforts to model and simulate the highly complex cement hydration process have been made over the past 40 years, with the aim of predicting the performance of concrete and designing innovative and enhanced cementitious materials. The ABM presented here - based on previous work - focuses on the early stages of cement hydration by modelling the physical-chemical processes at the particle level. The model considers the cement hydration process as a time and 3D space system, involving multiple diffusing and reacting species of spherical particles. Chemical reactions are simulated by adaptively selecting discrete stochastic simulation for the appropriate reaction, whenever that is necessary. Interactions between particles are also considered. The model has been inspired by reported cellular automata?s approach which provides detailed predictions of cement microstructure at the expense of significant computational difficulty. The ABM approach herein seeks to bring about an optimal balance between accuracy and computational efficiency.

Constrained self-organizing feature map to preserve feature extraction topology

In many classification problems, it is necessary to consider the specific location of an n-dimensional space from which features have been calculated. For example, considering the location of features extracted from specific areas of a two-dimensional space, as an image, could improve the understanding of a scene for a video surveillance system. In the same way, the same features extracted from different locations could mean different actions for a 3D HCI system. In this paper, we present a self-organizing feature map able to preserve the topology of locations of an n-dimensional space in which the vector of features have been extracted. The main contribution is to implicitly preserving the topology of the original space because considering the locations of the extracted features and their topology could ease the solution to certain problems. Specifically, the paper proposes the n-dimensional constrained self-organizing map preserving the input topology (nD-SOM-PINT). Features in adjacent areas of the n-dimensional space, used to extract the feature vectors, are explicitly in adjacent areas of the nD-SOM-PINT constraining the neural network structure and learning. As a study case, the neural network has been instantiate to represent and classify features as trajectories extracted from a sequence of images into a high level of semantic understanding. Experiments have been thoroughly carried out using the CAVIAR datasets (Corridor, Frontal and Inria) taken into account the global behaviour of an individual in order to validate the ability to preserve the topology of the two-dimensional space to obtain high-performance classification for trajectory classification in contrast of non-considering the location of features. Moreover, a brief example has been included to focus on validate the nD-SOM-PINT proposal in other domain than the individual trajectory. Results confirm the high accuracy of the nD-SOM-PINT outperforming previous methods aimed to classify the same datasets.