Infrastructure and nation building: The regulation and financing of network transportation infrastructures in Spain (1720-2010)

This paper analyzes Spanish infrastructure policy since the early 1700s: Road building in the eighteenth century, railway creation and expansion in the nineteenth, motorway expansion in the twentieth, and high speed rail development in the twenty-first. The analysis reveals a long-term pattern, in which infrastructure policy in Spain has been driven not by the requirements of commerce and economic activity, but rather by the desire to centralize transportation around the country’s political capital.

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incinerarion (MSWI) bottom ash (BA) and air pollution control (APC) ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behaviour and the economy of the process was considered. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.

Transparency and trust in government (2007-2014): a comparative study

In a 2000 report entitled "Trust in government. Ethics measures in OECD countries," OECD Secretary-General Donald J. Johnston emphasized the fact that public ethics are considered as a keystone of good governance. Moreover, public ethics are a prerequisite to public trust, which is in turn vital not only to any public service, but also to any society in general. At the same time, transparency reforms have flourished over the last few years and have several times been designed as a response to public distrust. Therefore, ethics, transparency and trust are closely linked together in a supposed virtuous circle where transparency works as a factor of better public ethics and leads to more trust in government on the citizens' side. This article explores the links between transparency and levels of trust in 10 countries between 2007 and 2014, using open data indexes and access to information requests as proxies for transparency. A national ranking of transparency, based on requests submitted by citizens to the administration and open data indexes, is then proposed. Key findings show that there is no sharp decline of trust in government in all countries considered in this article, and that transparency and trust in government are not systematically positively associated. Therefore, this article challenges the common assumption, mostly found in the normative literature, about a positive interrelation between the two, where trust in government is conceived as a beneficial effect of administrative transparency.

Protected maleimide building blocks for the decoration of peptides, peptoids and peptide nucleic acids

Monomers allowing for the introduction of [2,5-dimethylfuran]-protected maleimides into polyamides such as peptides, peptide nucleic acids, and peptoids were prepared, as well as the corresponding oligomers. Suitable maleimide deprotection conditions were established in each case. The stability of the adducts generated by Michael-type maleimide-thiol reaction and Diels-Alder cycloaddition to maleimide deprotection conditions was exploited to prepare a variety of conjugates from peptide and PNA scaffolds incorporating one free and one protected maleimide. The target molecules were synthesized by using two subsequent maleimide-involving click reactions separated by a maleimide deprotection step. Carrying out maleimide deprotection and conjugation simultaneously gave better results than performing the two reactions subsequently.

Building an open social learning community around a Dspace repository on Statistics

LORs, addressing content management and preservation, have the positive collaterals of institutional positioning and dissemination, but their main benefit is the empowerment of interest-centred learning communities, as we recognise that learning is much more than content, which becomes infrastructure: the LOR provides the learner interaction with the LOs, but also with other learners and teachers.

Fostering Collaborative Knowledge Building by the Effective Provision of Knowledge about the Discussion Process

Peer-reviewed

Building a Social Education curriculum based on Professional Competences : the experience of University of Girona

This article describes the process of adapting Social Education studies to the European Higher Education Area undertaken by a team of the teaching staff at the University of Girona (Spain). The aim of the experience is to build a curriculum based on thecompetencies recognized as such by professionals in the field of social education in our region. The article specifies the development of the various phases, each involving the active participation of professionals and teaching staff from the universities. To conclude, main characteristics of the curriculum are highlighted

Trust in inter-organizational relationships

Trust in inter-organizational collaborative relationships has attracted substantial research interest among academics and practitioners. Previous studies have concentrated on the benefits of trust to business outcomes and economic performance, as it is considered to be a source of competitive advantage. Despite this increased level of interest, there is no consensus, much less overall agreement, about how it should be conceptualized or about the number of dimensions it incorporates. On the inter-organizational level there is an obvious challenge in defining both the trusting party and the objects of trust. Thus, the notion of trust as an under-theorized and poorly understood phenomenon still holds. Hence, the motivation of this study was fuelled by the need to increase our knowledge and understanding of the role and nature of trust in inter-organizational collaborative relationships. It is posited that there is a call for more understanding about its antecedents and consequences, as well as about the very concept in inter-organizational collaborative relationships. The study is divided into two parts. The first part gives a general overview, and the second part comprises four research publications. Both qualitative and quantitative research methodology is utilized. A multi-method research design was used because it provides different levels of data and different perspectives on the phenomenon. The results of this study reveal that trust incorporates three dimensions on both the individual and the organizational level: capability, goodwill, and self-reference. Trust develops from the reputation and behavior of the trusted party. It appears from this study that trust is clearly directed towards both individual boundary spanners and the counterpart company itself – i.e. not only to one or the other. The trusting party, on the other hand, is always an individual, and not the organization per se. Trust increases collaboration benefits and lowers collaboration drawbacks, thus having a positive effect on relationship performance. The major contribution of this study lies in uncovering the critical points and drawbacks in prior research and thereby in responding to the highlighted challenges. The way in which these challenges were addressed offers contributions to three major issues in the emerging theory of trust in the inter-organizational context: firstly, this study clarifies the trustor-trustee discussion; secondly, it conceptualizes trust as existing on both individual and organizational levels; and thirdly, it provides more information about the antecedents of trust and the ways in which it affects relationship performance.

Coexistence of Two Kinds of Fluorinated Hydrogenated Micelles as Building Blocks for the Design of Bimodal Mesoporous Silica with Two Ordered Mesopore Networks

A simple and effective route has been developed for the synthesis of bimodal (3.6 and 9.4 nm) mesoporous silica materials that have two ordered interconnected pore networks. Mesostructures have been prepared through the self assembly mechanism by using a mixture of polyoxyethylene fluoroalkyl ether and triblock copolymer as building block. The investigation of the RF8(EO)9/P123/water phase diagram evidences that in the considered surfactant range of concentrations, the system is micellar (L1). DLS measurements indicate that this micellar phase is composed of two types of micelles, the size of the first one at around 7.6 nm corresponds unambiguously to the pure fluorinated micelles. The second type of micelles at higher diameter consists of fluorinated micelles which have accommodated a weak fraction of P123 molecules. Thus, in this study the bimodal mesoporous silica are really templated by two kinds of micelles.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.

Luottamuksen rooli ja rakentuminen organisaation sisäisten yksiköiden välisessä yhteistyössä

Tämä tutkielma tarkastelee luottamuksen roolia organisaation sisäisessä yhteistyössä. Tavoitteena on tutkia niitä mekanismeja, joiden avulla luottamuksen ilmenemistä sisäisessä yhteistyössä voidaan vahvistaa. Toiseksi työ tarkastelee sitä, onko luottamus yhteystyössä henkilöityvää vai ei-henkilöityvää. Koska luottamusta on pääsääntöisesti tutkittu yrityskontekstissa, työn kolmantena tavoitteena on tarkastella sitä, vaikuttavatko kuntaorganisaation erityispiirteet luottamuksen ilmenemiseen yksiköiden välisessä yhteistyössä. Tämän laadullisen tutkimuksen teoreettinen osuus toteutettiin kirjallisuuskatsauksena. Tutkimuksen empiirisenä aineistona käytettiin narratiiveja, jotka olivat kuntaorganisaation keskijohdolta kerättyjä tarinoita. Aineiston analysointiin käytettiin sisällönanalyysin menetelmiä. Tutkimuksen tuloksena voidaan todeta, että luottamus on perusedellytys toimivalle yhteistyösuhteelle ja se rakentuu hyvin pitkälle käyttäytymisen ja kommunikoinnin kautta. Luottamus yhteistyössä ilmenee hyvin usein ei-henkilöityvänä luottamuksena, jolloin se kohdistuu siihen yksikköön, minkä kanssa yhteystyötä tehdään. Kuntaorganisaation erityispiirteillä ei ole merkittävää roolia luottamuksen ilmenemisessä yhteistyössä, vaikka virkamiehen virkavastuu onkin tarinoista nähtävissä.

Role of references in international industrial marketing : a theory-building case study about supplier’s processes of utilizing references

Scientific studies regarding specifically references do not seem to exist. However, the utilization of references is an important practice for many companies involved in industrial marketing. The purpose of the study is to increase the understanding about the utilization of references in international industrial marketing in order to contribute to the development of a theory of reference behavior. Specifically, the modes of reference usage in industry, the factors affecting a supplier's reference behavior, and the question how references are actually utilized, are explored in the study. Due to the explorative nature of the study, a research design was followed where theory and empirical studies alternated. An Exploratory Framework was developed to guide a pilot case study that resulted in Framework 1. Results of the pilot study guided an expanded literature review that was used to develop first a Structural Framework and a Process Framework which were combined in Framework 2. Then, the second empirical phase of the case study was conducted in the same (pilot) case company. In this phase, Decision Systems Analysis (DSA) was used as the analysis method. The DSA procedure consists of three interviewing waves: initial interviews, reinterviews, and validating interviews. Four reference decision processes were identified, described and analyzed in the form of flowchart descriptions. The flowchart descriptions were used to explore new constructs and to develop new propositions to develop Framework 2 further. The quality of the study was ascertained by many actions in both empirical parts of the study. The construct validity of the study was ascertained by using multiple sources of evidence and by asking the key informant to review the pilot case report. The DSA method itself includes procedures assuring validity. Because of the choice to conduct a single case study, external validity was not even pursued. High reliability was pursued through detailed documentation and thorough reporting of evidence. It was concluded that the core of the concept of reference is a customer relationship regardless of the concrete forms a reference might take in its utilization. Depending on various contingencies, references might have various tasks inside the four roles of increasing 1) efficiency of sales and sales management, 2) efficiency of the business, 3) effectiveness of marketing activities, and 4) effectiveness in establishing, maintaining and enhancing customer relationships. Thus, references have not only external but internal tasks as well. A supplier's reference behavior might be affected by many hierarchical conditions. Additionally, the empirical study showed that the supplier can utilize its references as a continuous, all pervasive decision making process through various practices. The process includes both individual and unstructured decision making subprocesses. The proposed concept of reference can be used to guide a reference policy recommendable for companies for which the utilization of references is important. The significance of the study is threefold: proposing the concept of reference, developing a framework of a supplier's reference behavior and its short term process of utilizing references, and conceptual structuring of an unstructured and in industrial marketing important phenomenon to four roles.

The governmental organization's role in railway freight market's liberalization -building knowledge through Swedish and Polish operators' experiences

Globalization has increased transport aggregates’ demand. Whilst transport volumes increase, ecological values’im portance has sharpened: carbon footprint has become a measure known world widely. European Union together with other communities emphasizes friendliness to the environment: same trend has extended to transports. As a potential substitute for road transport is noted railway transport, which decreases the congestions and lowers the emission levels. Railway freight market was liberalized in the European Union 2007, which enabled new operators to enter the markets. This research had two main objectives. Firstly, it examined the main market entry strategies utilized and the barriers to entry confronted by the operators who entered the markets after the liberalization. Secondly, the aim was to find ways the governmental organization could enhance its service towards potential railway freight operators. Research is a qualitative case study, utilizing descriptive analytical research method with a normative shade. Empirical data was gathered by interviewing Swedish and Polish railway freight operators by using a semi-structured theme-interview. This research provided novel information by using first-hand data; topic has been researched previously by utilizing second-hand data and literature analyses. Based on this research, rolling stock acquisition, needed investments and bureaucracy generate the main barriers to entry. The research results show that the mostly utilized market entry strategies are start-up and vertical integration. The governmental organization could enhance the market entry process by organizing courses, paying extra attention on flexibility, internal know-how and educating the staff.

Building wood debris piles benefits avian seed dispersers in burned and logged Mediterranean pine forests

Salvage logging is a common practice carried out in burned forests worldwide, and intended to mitigate the economic losses caused by wildfires. Logging implies an additional disturbance occurring shortly after fire, although its ecological effects can be somewhat mitigated by leaving wood debris on site. The composition of the bird community and its capacity to provide ecosystem services such as seed dispersal offleshy-fruited plants have been shown to be affected by postfire logging. We assessedthe effects of the habitat structure resulting from different postfire management practices on the bird community, in three burned pine forests in Catalonia (western Mediterranean). For this purpose, we focused on the group of species that is responsible for seed dispersal, a process which takes place primarily during the winter in theMediterranean basin. In addition, we assessed microhabitat selection by seed disperser birds in such environments in relation to management practices. Our results showed a significant, positive relationship between the density of wood debris piles and the abundance of seed disperser birds. Furthermore, such piles were the preferredmicrohabitat of these species. This reveals an important effect of forest management on seed disperser birds, which is likely to affect the dynamics of bird-dependent seed dispersal. Thus, building wood debris piles can be a useful practice for the conservation of both the species and their ecosystem services, while also being compatible with timber harvesting

Building complexity in O2-binding copper complexes : site-selective metalation and intermolecular O2-binding at dicopper and heterometallic complexes derived from an unsymmetric ligand

A novel unsymmetric dinucleating ligand (LN3N4) combining a tridentate and a tetradentate binding sites linked through a m-xylyl spacer was synthesized as ligand scaffold for preparing homo- and dimetallic complexes, where the two metal ions are bound in two different coordination environments. Site-selective binding of different metal ions is demonstrated. LN3N4 is able to discriminate between CuI and a complementary metal (M′ = CuI, ZnII, FeII, CuII, or GaIII) so that pure heterodimetallic complexes with a general formula [CuIM′(LN3N4)]n+ are synthesized. Reaction of the dicopper(I) complex [CuI 2(LN3N4)]2+ with O2 leads to the formation of two different copper-dioxygen (Cu2O2) intermolecular species (O and TP) between two copper atoms located in the same site from different complex molecules. Taking advantage of this feature, reaction of the heterodimetallic complexes [CuM′(LN3N4)]n+ with O2 at low temperature is used as a tool to determine the final position of the CuI center in the system because only one of the two Cu2O2 species is formed