Successful scale-up of human embryonic stem cell production in a stirred microcarrier culture system

Future clinical applications of human embryonic stem (hES) cells will require high-yield culture protocols. Currently, hES cells are mainly cultured in static tissue plates, which offer a limited surface and require repeated sub-culturing. Here we describe a stirred system with commercial dextran-based microcarriers coated with denatured collagen to scale-up hES cell production. Maintenance of pluripotency in the microcarrier-based stirred system was shown by immunocytochemical and flow cytometry analyses for pluripotency-associated markers. The formation of cavitated embryoid bodies expressing markers of endoderm, ectoderm and mesoderm was further evidence of maintenance of differentiation capability. Cell yield per volume of medium spent was more than 2-fold higher than in static plates, resulting in a significant decrease in cultivation costs. A total of 10(8) karyotypically stable hES cells were obtained from a unitary small vessel that needed virtually no manipulation during cell proliferation, decreasing risks of contamination. Spinner flasks are available up to working volumes in the range of several liters. If desired, samples from the homogenous suspension can be withdrawn to allow process validation needed in the last expansion steps prior to transplantation. Especially when thinking about clinical trials involving from dozens to hundreds of patients, the use of a small number of larger spinners instead of hundreds of plates or flasks will be beneficial. To our knowledge, this is the first description of successful scale-up of feeder- and Matrigel™-free production of undifferentiated hES cells under continuous agitation, which makes this system a promising alternative for both therapy and research needs.

Effect of escitalopram on the processing of emotional faces

Serotonin has been implicated in the neurobiology of depressive and anxiety disorders, but little is known about its role in the modulation of basic emotional processing. The aim of this study was to determine the effect of the selective serotonin reuptake inhibitor, escitalopram, on the perception of facial emotional expressions. Twelve healthy male volunteers completed two experimental sessions each, in a randomized, balanced order, double-blind design. A single oral dose of escitalopram (10 mg) or placebo was administered 3 h before the task. Participants were presented to a task composed of six basic emotions (anger, disgust, fear, happiness, sadness, and surprise) that were morphed between neutral and each standard emotion in 10% steps. Escitalopram facilitated the recognition of sadness and inhibited the recognition of happiness in male, but not female faces. No drug effect on subjective measures was detected. These results confirm that serotonin modulates the recognition of emotional faces, and suggest that the gender of the face can have a role in this modulation. Further studies including female volunteers are needed.

High levels of LDL-C combined with low levels of HDL-C further increase platelet activation in hypercholesterolemic patients

High levels of low-density lipoprotein cholesterol (LDL-C) enhance platelet activation, whereas high levels of high-density lipoprotein cholesterol (HDL-C) exert a cardioprotective effect. However, the effects on platelet activation of high levels of LDL-C combined with low levels of HDL-C (HLC) have not yet been reported. We aimed to evaluate the platelet activation marker of HLC patients and investigate the antiplatelet effect of atorvastatin on this population. Forty-eight patients with high levels of LDL-C were enrolled. Among these, 23 had HLC and the other 25 had high levels of LDL-C combined with normal levels of HDL-C (HNC). A total of 35 normocholesterolemic (NOMC) volunteers were included as controls. Whole blood flow cytometry and platelet aggregation measurements were performed on all participants to detect the following platelet activation markers: CD62p (P-selectin), PAC-1 (GPIIb/IIIa), and maximal platelet aggregation (MPAG). A daily dose of 20 mg atorvastatin was administered to patients with high levels of LDL-C, and the above assessments were obtained at baseline and after 1 and 2 months of treatment. The expression of platelets CD62p and PAC-1 was increased in HNC patients compared to NOMC volunteers (P<0.01 and P<0.05). Furthermore, the surface expression of platelets CD62p and PAC-1 was greater among HLC patients than among HNC patients (P<0.01 and P<0.05). Although the expression of CD62p and PAC-1 decreased significantly after atorvastatin treatment, it remained higher in the HLC group than in the HNC group (P<0.05 and P=0.116). The reduction of HDL-C further increased platelet activation in patients with high levels of LDL-C. Platelet activation remained higher among HLC patients regardless of atorvastatin treatment.

Defining Sales and Operations Planning Process in an Environmental Management Company

Sales and operations research publications have increased significantly in the last decades. The concept of sales and operations planning (S&OP) has gained increased recognition and has been put forward as the area within Supply Chain Management (SCM). Development of S&OP is based on the need for determining future actions, both for sales and operations, since off-shoring, outsourcing, complex supply chains and extended lead times make challenges for responding to changes in the marketplace when they occur. Order intake of the case company has grown rapidly during the last years. Along with the growth, new challenges considering data management and information flow have arisen due to increasing customer orders. To manage these challenges, case company has implemented S&OP process, though initial process is in early stage and due to this, the process is not managing the increased customer orders adequately. Thesis objective is to explore extensively the S&OP process content of the case company and give further recommendations. Objectives are categorized into six different groups, to clarify the purpose of this thesis. Qualitative research methods used are active participant observation, qualitative interviews, enquiry, education, and a workshop. It is notable that demand planning was felt as cumbersome, so it is typically the biggest challenge in S&OP process. More proactive the sales forecasting can be, more expanded the time horizon of operational planning will turn out. S&OP process is 60 percent change management, 30 percent process development and 10 percent technology. The change management and continuous improvement can sometimes be arduous and set as secondary. It is important that different people are required to improve the process and the process is constantly evaluated. As well as, process governance is substantially in a central role and it has to be managed consciously. Generally, S&OP process was seen important and all the stakeholders were committed to the process. Particular sections were experienced more important than others, depending on the stakeholders’ point of views. Recommendations to objective groups are evaluated by the achievable benefit and resource requirement. The urgent and easily implemented improvement recommendations should be executed firstly. Next steps are to develop more coherent process structure and refine cost awareness. Afterwards demand planning, supply planning, and reporting should be developed more profoundly. For last, information technology system should be implemented to support the process phases.

Genetic, prenatal and postnatal determinants of weight gain and obesity in young children – The STEPS Study

Genetic, Prenatal and Postnatal Determinants of Weight Gain and Obesity in Young Children – The STEPS Study University of Turku, Faculty of Medicine, Department of Paediatrics, University of Turku Doctoral Program of Clinical Investigation (CLIPD), Turku Institute for Child and Youth Research. Conditions of being overweight and obese in childhood are common health problems with longlasting effects into adulthood. Currently 22% of Finnish boys and 12% of Finnish girls are overweight and 4% of Finnish boys and 2% of Finnish girls are obese. The foundation for later health is formed early, even before birth, and the importance of prenatal growth on later health outcomes is widely acknowledged. When the mother is overweight, had high gestational weight gain and disturbances in glucose metabolism during pregnancy, an increased risk of obesity in children is present. On the other hand, breastfeeding and later introduction of complementary foods are associated with a decreased obesity risk. In addition to these, many genetic and environmental factors have an effect on obesity risk, but the clustering of these factors is not extensively studied. The main objective of this thesis was to provide comprehensive information on prenatal and early postnatal factors associated with weight gain and obesity in infancy up to two years of age. The study was part of the STEPS Study (Steps to Healthy Development), which is a follow-up study consisting of 1797 families. This thesis focused on children up to 24 months of age. Altogether 26% of boys and 17% of girls were overweight and 5% of boys and 4% of girls were obese at 24 months of age according to New Finnish Growth references for Children BMI-for-age criteria. Compared to children who remained normal weight, the children who became overweight or obese showed different growth trajectories already at 13 months of age. The mother being overweight had an impact on children’s birth weight and early growth from birth to 24 months of age. The mean duration of breastfeeding was almost 2 months shorter in overweight women in comparison to normal weight women. A longer duration of breastfeeding was protective against excessive weight gain, high BMI, high body weight and high weight-for-length SDS during the first 24 months of life. Breast milk fatty acid composition differed between overweight and normal weight mothers, and overweight women had more saturated fatty acids and less n-3 fatty acids in breast milk. Overweight women also introduced complementary foods to their infants earlier than normal weight mothers. Genetic risk score calculated from 83 obesogenic- and adiposity-related single nucleotide polymorphisms (SNPs) showed that infants with a high genetic risk for being overweight and obese were heavier at 13 months and 24 months of age than infants with a low genetic risk, thus possibly predisposing to later obesity in obesogenic environment. Obesity Risk Score showed that children with highest number of risk factors had almost 6-fold risk of being overweight and obese at 24 months compared to children with lowest number of risk factors. The accuracy of the Obesity Risk Score in predicting overweight and obesity at 24 months was 82%. This study showed that many of the obesogenic risk factors tend to cluster within children and families and that children who later became overweight or obese show different growth trajectories already at a young age. These results highlight the importance of early detection of children with higher obesity risk as well as the importance of prevention measures focused on parents. Keywords: Breastfeeding, Child, Complementary Feeding, Genes, Glucose metabolism, Growth, Infant Nutrition Physiology, Nutrition, Obesity, Overweight, Programming

Bio and chemocatalysis for stereo and regioselective one-pot reaction applications

The development of cost efficient, selective and sustainable chemical processes for production of chiral building blocks is of great importance in synthetic and industrial organic chemistry. One way to reach these objectives is to carry out several reactions steps in one vessel at one time. Furthermore, when this kind of one-pot multi step reactions are catalyzed by heterogeneous chemo- and bio-catalysts, which can be separated from the reaction products by filtration, practical access to chiral small molecules for further utilization can be obtained. The initial reactions studied in this thesis are the two step dynamic kinetic resolution of rac-2-hydroxy-1-indanone and the regioselective hydrogenation of 1,2-indanedione. These reactions are then combined in a new heterogeneously catalyzed one-pot reaction sequence enabling simple recovery of the catalysts by filtration, facilitating simple reaction product isolation. Conclusively, the readily available 1,2-indanedione is by the presented one-pot sequence, utilizing heterogeneous enzyme and transition metal based catalysts, transferred with high regio- and stereoselectivity to a useful chiral vicinal hydroxyl ketone structure. Additional and complementary investigation of homogeneous half-sandwich ruthenium complexes for catalyzing the epimerization of chiral secondary alcohols of five natural products containing additional non-functionalized stereocenters was conducted. In principle, this kind of epimerization reactions of single stereocenters could be utilized for converting inexpensive starting materials, containing other stereogenic centers, into diastereomeric mixtures from which more valuable compounds can be isolated by traditional isolation techniques.

Influence of physical damage and freezing on histamine concentration and microbiological quality of yellowfin tuna during processing

Yellowfin tuna has a high level of free histidine in their muscle, which can lead to histamine formation by microorganisms if temperature abuse occurs during handling and further processing. The objective of this study was to measure levels of histamine in damaged and undamaged thawed muscle to determine the effect of physical damage on the microbial count and histamine formation during the initial steps of canning processing and to isolate and identify the main histamine-forming microorganisms present in the flesh of yellowfin tuna. Total mesophilic and psicrophilic microorganisms were determined using the standard plate method. The presence of histamine-forming microorganisms was determined in a modified Niven's agar. Strains were further identified using the API 20E kit for enterobacteriaceae and Gram-negative bacilli. Physically damaged tuna did not show higher microbiological contamination than that of undamaged muscle tuna. The most active histamine-forming microorganism present in tuna flesh was Morganella morganii. Other decarboxylating microorganisms present were Enterobacter agglomerans and Enterobacter cloacae. Physical damage of tune during catching and handling did not increase the level of histamine or the amount of microorganisms present in tuna meat during frozen transportation, but they showed a higher risk of histamine-forming microorganism growth during processing.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.

Steps towards more effective antitrust system in EU – The Damages Directive’s effect on victim’s right to compensation for antitrust harm

Kaikkien kansalaisten ja yritysten, jotka kärsivät vahinkoa Euroopan Unionin kilpailusääntöjen (SEUT 101 ja 102 artiklan) rikkomisen vuoksi, on voitava vaatia korvauksia vahingon aiheuttaneelta osapuolelta. Euroopan unionin tuomioistuin on ratkaisuillaan Courage ja Manfredi vahvistanut vahinkoa kärsineen oikeuden saada korvausta kärsimästään vahingosta. Suomessa kilpailuoikeudellista vahingonkorvausta koskeva oikeuskäytäntö on ollut vähäistä, vaikkakin viime aikoina on annettu muutama merkittävä vahingonkorvausratkaisu, näistä kenties tunnetuimpana asvalttikartelliratkaisu. Kilpailuoikeuden rikkomisesta vahinkoa kärsineet saavat kuitenkin vain harvoin korvausta kärsimästään vahingosta, mikä on ollut seurausta erilaisista lainsäädännöllisistä ja menettelyistä johtuvista esteistä jäsenvaltioiden säännöissä. Komission pitkään kestänyt lainsäädäntöhanke EU:n kilpailuoikeuden täytäntöönpanojärjestelmän selkeyttämiseksi päättyi marraskuussa 2014, kun Euroopan parlamentin ja neuvoston direktiivi tietyistä säännöistä, joita sovelletaan jäsenvaltioiden ja Euroopan unionin kilpailuoikeuden rikkomisen johdosta kansallisen lainsäädännön nojalla nostettuihin vahingonkorvauskanteisiin (2014/104/ EU) hyväksyttiin. Direktiivi julkaistiin Euroopan unionin virallisessa lehdessä 5. joulukuuta 2014, ja jäsenvaltioilla on 27.12.2016 asti aikaa implementoida direktiivi osaksi kansallista lainsäädäntöä. Direktiivin tavoitteena on EU:n kilpailusääntöjen tehokas täytäntöönpano sekä kilpailuoikeuden julkisoikeudellisen ja yksityisoikeudellisen täytäntöönpanon selkeyttäminen. Lisäksi direktiivi pyrkii varmistamaan, että vahingonkärsijät voivat saada täyden korvauksen kärsimästään vahingosta, sekä poistamaan esteitä ja pienentämään kustannuksia vahingon todistamisessa, samalla harmonisoiden eri jäsenmaissa toimivien yritysten oikeussuojan tasoa. Tarkastelen pro gradu –tutkielmassani kilpailuoikeudellisen vahingonkorvauksen kehitystä sekä uuden EU:n vahingonkorvausdirektiivin vaikutuksia erityisesti vahingonkärsijän näkökulmasta, eli sitä kuinka direktiivi vaikuttaa vahingonkärsijän mahdollisuuteen saada korvausta kärsimästään vahingosta, joka johtuu EU:n kilpailusääntöjen rikkomisesta. Lisäksi tarkastelen lyhyesti direktiivin tuomia muutoksia Suomen lainsäädäntöön. Tutkielmani loppupäätelmä on, että vaikka vahingonkorvausdirektiivi ei täydellisesti paranna vahingonkärsijän asemaa, se selkeyttää monella tavalla kilpailuoikeudellisten vahingonkorvauskanteiden nykyistä tilaa, ja saattaa tietyssä määrin rohkaista vahingonkärsijiä hakemaan korvausta kärsimästään vahingosta.

Reengineering and modelling of a product certification process

Työn teoriaosuudessa tutkittiin prosessien uudelleen suunnittelua, prosessien mallintamista sekä prosessimittariston rakentamista. Työn tavoitteena oli uudelleen suunnitella organisaation sertifiointiprosessi. Tämän tavoitteen saavuttamiseksi piti mallintaa nykyinen ja uusi prosessi sekä rakentaa mittaristo, joka antaisi organisaatiolle arvokasta tietoa siitä, kuinka tehokkaasti uusi prosessi toimii. Työ suoritettiin osallistuvana toimintatutkimuksena. Diplomityön tekijä oli toiminut kohdeorganisaatiossa työntekijänä jo useita vuosia ja pystyi näinollen hyödyntämään omaa tietämystään sekä nykyisen prosessin mallintamisessa, että uuden prosessin suunnittelussa. Työn tuloksena syntyi uusi sertifiointiprosessi, joka on karsitumpi ja tehokkaampi kuin edeltäjänsä. Uusi mittaristojärjestelmä rakennettiin, jota organisaation johto kykenisi seuraamaan prosessin sidosryhmien tehokkuutta sekä tuotteiden laadun kehitystä. Sivutuotteena organisaatio sai käyttöönsä yksityiskohtaiset prosessikuvaukset, joita voidaan hyödyntää koulutusmateriaalina uutta henkilöstöä rekrytoitaessa sekä informatiivisena työkaluna esiteltäessä prosessia virallisille sertifiointitahoille.

Competitive Effects of Non-Controlling Minority Acquisitions – Sufficient to merit further EU merger regulation?

Partial ownership interests are a widespread phenomenon in modern corporate environment. Unless minority shareholding affords the target to exercise control over the target, they do currently not have to be notified to the European Commission under EU merger regime. However, economic research has long suggested that when linking competing or non-horizontally positioned undertakings particularly in industries with few competitors, minority shareholdings even far below the majority of shares or voting rights could lead to higher prices or lower output volumes to the detriment of consumers. The Commission has recognized this issue and proceeded to suggest an extension of the merger regime to catch also certain non-controlling minority acquisitions. Horizontal non-controlling minority shareholdings create a positive correlation between the sales revenues of the partial acquirer and target. Through the equity interest the acquirer will internalise a fraction, proportional to the financial rights attached to the shareholding, of the profit of the target. This will incentivise the acquirer to contribute to increasing the target’s business profits by increasing its own sales price (horizontal unilateral effects). When a minority stake is held in a vertically related or a conglomerate company, the minority acquirer could be allowed to hamper or eliminate the target’s rivals’ access either to inputs (input foreclosure) or customers (customer foreclosure), depending on which level of the supply chain the parties are (vertical unilateral effects). Under certain circumstances minority share acquisitions could also lessen competition because they facilitate collusion between companies active in the market (coordinated effects). Economic theory confirms that non-controlling minority shareholdings may under certain circumstances create anti-competitive effects that are unlikely to be remedies by pro-competitive effects. However, they are likely to be of less significant nature than anticompetitive effects created by full mergers. This derives fore mostly from the fact that a minority share acquirer carries all the costs associated with its unilateral action but will internalise only a fraction of the lost profits. This is likely to limit the acquirer’s incentive to raise price and the profitability of such behavior. Having in mind that the number of potentially problematic cases is expected to be next to negligible, the limited potential competitive effects of non-controlling minority share acquisitions cannot be seen to clearly merit extension of the scope of the EUMR. The system suggested by the Commission is particularly ill-fitted for such purpose given the clear lack of legal certainty and considerable administrative burden associated with it.

Rationality in children: the first steps

Not all categorization is conceptual. Many of the experimental findings concerning infant and animal categorization invite the hypothesis that the subjects form abstract perceptual representations, mental models or cognitive maps that are not composed of concepts. The paper is a reflection upon the idea that conceptual categorization involves the ability to make categorical judgements under the guidance of norms of rationality. These include a norm of truth-seeking and a norm of good evidence. Acceptance of these norms implies willingness to defer to cognitive authorities, unwillingness to commit oneself to contradictions, and knowledge of how to reorganize one's representational system upon discovering that one has made a mistake. It is proposed that the cognitive architecture required for basic rationality is similar to that which underlies pretend-play. The representational system must be able to make room for separate 'mental spaces' in which alternatives to the actual world are entertained. The same feature underlies the ability to understand modalities, time, the appearance-reality distinction, other minds, and ethics. Each area of understanding admits of degrees, and mastery (up to normal adult level) takes years. But rational concept-management, at least in its most rudimentary form, does not require a capacity to form second-order representations. It requires knowledge of how to operate upon, and compare, the contents of different mental spaces.

Metal oxides prepared through the nanocasting approach-mechanistic study, surface interactions and applications in separation

Mesoporous metal oxides are nowadays widely used in various technological applications, for instance in catalysis, biomolecular separations and drug delivery. A popular technique used to synthesize mesoporous metal oxides is the nanocasting process. Mesoporous metal oxide replicas are obtained from the impregnation of a porous template with a metal oxide precursor followed by thermal treatment and removal of the template by etching in NaOH or HF solutions. In a similar manner to the traditional casting wherein the product inherits the features of the mold, the metal oxide replicas are supposed to have an inverse structure of the starting porous template. This is however not the case, as broken or deformed particles and other structural defects have all been experienced during nanocasting experiments. Although the nanocasting technique is widely used, not all the processing steps are well understood. Questions over the fidelity of replication and morphology control are yet to be adequately answered. This work therefore attempts to answer some of these questions by elucidating the nanocasting process, pin pointing the crucial steps involved and how to harness this knowledge in making wholesome replicas which are a true replication of the starting templates. The rich surface chemistry of mesoporous metal oxides is an important reason why they are widely used in applications such as catalysis, biomolecular separation, etc. At times the surface is modified or functionalized with organic species for stability or for a particular application. In this work, nanocast metal oxides (TiO2, ZrO2 and SnO2) and SiO2 were modified with amino-containing molecules using four different approaches, namely (a) covalent bonding of 3-aminopropyltriethoxysilane (APTES), (b) adsorption of 2-aminoethyl dihydrogen phosphate (AEDP), (c) surface polymerization of aziridine and (d) adsorption of poly(ethylenimine) (PEI) through electrostatic interactions. Afterwards, the hydrolytic stability of each functionalization was investigated at pH 2 and 10 by zeta potential measurements. The modifications were successful except for the AEDP approach which was unable to produce efficient amino-modification on any of the metal oxides used. The APTES, aziridine and PEI amino-modifications were fairly stable at pH 10 for all the metal oxides tested while only AZ and PEI modified-SnO2 were stable at pH 2 after 40 h. Furthermore, the functionalized metal oxides (SiO2, Mn2O3, ZrO2 and SnO2) were packed into columns for capillary liquid chromatography (CLC) and capillary electrochromatography (CEC). Among the functionalized metal oxides, aziridinefunctionalized SiO2, (SiO2-AZ) showed good chemical stability, and was the most useful packing material in both CLC and CEC. Lastly, nanocast metal oxides were synthesized for phosphopeptide enrichment which is a technique used to enrich phosphorylated proteins in biological samples prior to mass spectrometry analysis. By using the nanocasting technique to prepare the metal oxides, the surface area was controlled within a range of 42-75 m2/g thereby enabling an objective comparison of the metal oxides. The binding characteristics of these metal oxides were compared by using samples with different levels of complexity such as synthetic peptides and cell lysates. The results show that nanocast TiO2, ZrO2, Fe2O3 and In2O3 have comparable binding characteristics. Furthermore, In2O3 which is a novel material in phosphopeptide enrichment applications performed comparably with standard TiO2 which is the benchmark for such phosphopeptide enrichment procedures. The performance of the metal oxides was explained by ranking the metal oxides according to their isoelectric points and acidity. Overall, the clarification of the nanocasting process provided in this work will aid the synthesis of metal oxides with true fidelity of replication. Also, the different applications of the metal oxides based on their surface interactions and binding characteristics show the versatility of metal oxide materials. Some of these results can form the basis from which further applications and protocols can be developed.

A physical activity intervention in a workplace setting

Physical inactivity poses a huge burden on Canada's health care system and is detrimental to the health of Canadians (Katzmarzyk & Janssen, 2004). Walking is a viable option for individuals to become physically active on a daily basis and is in fact the most commonly reported leisure time physical activity. It has been associated with many health benefits including weight loss/weight control, reduced risk of coronary artery disease and diabetes, lowered blood pressure, and improved psychological wellbeing (Brisson & Tudor-Locke, 2004). Specifically, individuals' stage of change, selfefficacy and health related quality of life (HRQL) are three psychological constructs that can be greatly improved with increased physical activity (Dishman, 1991; Penedo & Dahn, 2005; Poag & McAuley, 1992). Public health physical activity recommendations exist but many individuals find these difficult to meet due to overly busy lifestyles (Public Health Agency of Canada, 2003). Pedometers are inexpensive devices that can monitor individual bouts of walking so that the incorporation of physical activity into one's daily life is more plausible. They are also excellent tools for motivation, goalsetting, and immediate feedback (Brisson & Tudor-Locke, 2004). Since many people spend a large proportion of their time at their places of employment, workplaces have begun to be a common site for the development of physical activity interventions. These programs have been growing in popUlarity and have shown numerous benefits for both employees and employers (Voit, 2001). The purpose of the current study was to implement and evaluate the use of a pedometer-based physical activity intervention incorporating goal-setting and physical activity logs in a workplace setting, and to examine the relationship between different types of self-efficacy (task, barrier, and scheduling) and different phases of the intervention. Twenty male participants from a local steel manufacturing plant who exhibited health risk factors (e.g. hypertension, diabetes, etc.) were assigned to one of two groups (group A or group B). All participants were asked to wear pedometers on their waists, record their daily steps, set goals that were outlined on a step-tracking sheet (detennined by their baseline number of steps), and keep track of their work days, wakelbed time, sedentary time, and time spent doing other physical activity. Group A began the intervention immediately following the baseline measures, whereas group B continued with their regular routine for 4 weeks before beginning. Physiological measures (height, weight, blood pressure, relative body fat, waist and hip circumference, and body mass index) were taken and a battery of questionnaires that assessed barrier, task and scheduling self-efficacy, HRQL, and stage of change administered at baseline, week 5 (end of intervention for group A), week 9 (end of intervention for group B; follow-up for group A) and week 13 (follow-up for both groups). Results showed that this workplace physical activity intervention was successful at increasing the participants' daily steps, that task self-efficacy is a significant predictor of participants' exercise adherence during the initial stages of participation (intervention phase), and that the participants felt that this intervention was effective. Finally, further exploratory analyses showed that this intervention was effective for all participants, but most valuable for participants most in need of improvement - that is, those who were most sedentary prior to the intervention. This intervention is an inexpensive use of simple and effective tools (e.g. pedometers), has the potential to attract a wide variety of participants and become a pennanent part of any health promotion initiative.