Raman, IR, UV-vis and EPR characterization of two copper dioxolene complexes derived from L-dopa and dopamine

The anionic complexes [Cu(L(1-))(3)](1-), L(-) = dopasemiquinone or L-dopasemiqui none, were prepared and characterized. The complexes are stable in aqueous solution showing intense absorption bands at ca. 605 nm for Cu(II)-L-dopasemiquinone and at ca. 595 nm for Cu(II)-dopasemiquinone in the UV-vis spectra, that can be assigned to intraligand transitions. Noradrenaline and adrenaline, under the same reaction conditions, did not yield Cu-complexes, despite the bands in the UV region showing that noradrenaline and adrenaline were oxidized during the process. The complexes display a resonance Raman effect, and the most enhanced bands involve ring modes and particularly the vCC + vCO stretching mode at ca. 1384 cm(-1). The free radical nature of the ligands and the oxidation state of the Cu(II) were confirmed by the EPR spectra that display absorptions assigned to organic radicals with g= 2.0005 and g = 2.0923, and for Cu(II) with g = 2.008 and g = 2.0897 for L-dopasemiquinone and dopasemiquinone, respectively. The possibility that dopamine and L-dopa can form stable and aqueous-soluble copper complexes at neutral pH, whereas noradrenaline and adrenaline cannot, may be important in understanding how Cu(II)-dopamine crosses the cellular membrane as proposed in the literature to explain the role of copper in Wilson disease. (c) 2008 Elsevier B.V. All rights reserved.

Expedient, accurate methods for the determination of the degree of substitution of cellulose carboxylic esters: Application of UV-vis spectroscopy (dye solvatochromism) and FTIR

Two techniques, namely UV-vis- and FTIR spectroscopy, have been employed in order to calculate the degree of substitution (DS) of cellulose carboxylic esters, including acetates, CAs, butyrates, CBs, and hexanoates, CHs. Regarding UV-vis spectroscopy, we have employed a novel approach, based on measuring the dependence of lambda(max) of the intra-molecular charge-transfer bands of polarity probes adsorbed on DS of the ester films (solvatochromism). Additionally, we have revisited the use of FTIR for DS determination. Several methods have been used in order to plot Beer`s law graph, namely: Absorption of KBr pellets, pre-coated with CA: reflectance (DRIFTS) of CAs-KBr solid-solid mixtures with, or without the use of 1.4-dicyanobenzene as an internal reference; reflectance of KBr powder pre-coated with CA. The methods indicated are simple, fast, and accurate, requiring much less ester than the titration method. The probe method is independent of the experimental variables examined. (c) 2010 Published by Elsevier Ltd.

Molecular modeling and UV-vis spectroscopic studies on the mechanism of action of reversed chloroquine (RCQ)

Reversed chloroquine (RCQ) is a multiple ligand compound active against chloroquine-sensitive and resistant falciparum malaria. It is composed by a 4-aminoquinoline moiety (like that present in chloroquine (CQ)) joined to imipramine (IMP), a modulating agent that also showed intrinsic antiplasmodial activity against Brazilian Plasmodium falciparum isolates resistant to CQ. Molecular modeling and ultraviolet-visible spectroscopy (UV-vis) studies strongly suggest that the interaction between RCQ and heme is predominant through the quinoline moiety in a mechanism of action similar to that observed for CQ. (C) 2010 Elsevier Ltd. All rights reserved.

Rapid method for the determination. of organic acids in wine by capillary electrophoresis with indirect UV detection

A capillary electrophoresis method for organic acids in wine was developed and validated. The optimal electrolyte consisted of 10 mmol/L 3,5-dinitrobenzoic acid (DNB) at pH 3.6 containing 0.2 mmol/L cetyltrimethylammonium bromide as flow reverser. DNB was chosen because it has an effective mobility similar to the organic acids under investigation, good buffering capacity at pH 3.6, and good chromophoric characteristics for indirect UV-absorbance detection at 254 nm. Sample preparation involved dilution and filtration. The method showed good performance characteristics: Linearity at 6 to 285 mg/L (r > 0.99); detection and quantification limits of 0.64 to 1.55 and 2.12 to 5.15 mg/L, respectively; separation time of less than 5.5 min. Coefficients of variation for ten injections were less than 5% and recoveries varied from 95% to 102%. Application to 23 samples of Brazilian wine confirmed good repeatability and demonstrated wide variation in the organic acid concentrations. (C) 2008 Elsevier Ltd. All rights reserved.

Derivatives of Biomacromolecules as Stabilizers of Aqueous Alumina Suspensions

The stabilization of alumina suspensions is key to the development of high-performance materials for the ceramic industry, which has motivated extensive research into synthetic polymers used as stabilizers. In this study, mimosa tannin extract and a chitosan derivative, that is, macromolecules obtained from renewable resources, are shown to be promising to replace synthetic polymers, yielding less viscous suspensions with smaller particles and greater fluidity, that is, more homogeneous suspensions that may lead to better-quality products. The functional groups of tannin present in mimosa extract and N,N,N-trimethylchitosan (TMC) are capable of establishing interactions with the alumina surface, thus leading to repulsion between the particles mainly due to steric and electrosteric mechanisms, respectively. The stabilization of the suspension induced by either TMC or mimosa tannin was confirmed by a considerable decrease in viscosity and average particle size, in comparison with alumina suspensions without stabilizing agents. The viscosity/average particle size decreased by 49/84% and 52/87% for suspensions with TMC and mimosa tannin, respectively. In addition, the increase in the absolute zeta potential upon addition of either TMC or mimosa tannin extract, especially at high pHs, points to an increased stability of the suspension. The feasibility of using derivatives of macromolecules from renewable sources to stabilize aqueous alumina suspensions was therefore demonstrated. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 117: 58-66, 2010

Quantification of isoorientin and total flavonoids in Passiflora edulis fruit pulp by HPLC-UV/DAD

A method is reported for the quantification of isoorientin (using a standard addition method) and total flavonoids (expressed as rutin, using the external standard method) in passion fruit pulp (Passiflora edulis Sims f. flavicarpa Degener, Passifloraceae). Extraction of flavonoids was optimized by experimental design methodology, and quantitative analysis was performed by high-performance liquid chromatography with photo-diode array detection (HPLC-UV/DAD). The method was developed and validated according to ICH requirements for specificity, linearity, accuracy, precision (repeatability and intermediate precision). LOD and LOQ. Rutin was chosen as standard for the quantification of total flavonoids in order to propose a HPLC method feasible for routine analysis of the flavonoids in the passion fruit pulp. The passion fruit pulp contained 16.226 +/- 0.050 mg L(-1) of isoorientin and 158.037 +/- 0.602 mg L(-1) of total flavonoid, suggesting that P. edulis fruits may be comparable with other flavonoid food sources such as orange juice or sugarcane juice. (C) 2010 Elsevier B.V. All rights reserved.

Polydimethylsiloxane/polypyrrole stir bar sorptive extraction and liquid chromatography (SBSE/LC-UV) analysis of antidepressants in plasma samples

A new polymeric coating consisting of a dual-phase, polydimethylsiloxane (PDMS) and polypyrrole (PPY) was developed for the stir bar sorptive extraction (SBSE) of antidepressants (mirtazapine, citalopram, paroxetine, duloxetine, fluoxetine and sertraline) from plasma samples, followed by liquid chromatography analysis (SBSE/LC-UV). The extractions were based on both adsorption (PPY) and sorption (PDMS) mechanisms. SBSE variables, such as extraction time, temperature, pH of the matrix, and desorption time were optimized, in order to achieve suitable analytical sensitivity in a short time period. The PDMS/PPY coated stir bar showed high extraction efficiency (sensitivity and selectivity) toward the target analytes. The quantification limits (LOQ) of the SBSE/LC-UV method ranged from 20 ng mL(-1) to 50 ng mL(-1), and the linear range was from LOQ to 500 ng mL(-1), with a determination coefficient higher than 0.99. The inter-day precision of the SBSE/LC-UV method presented a variation coefficient lower than 15%. The efficiency of the SBSE/LC-UV method was proved by analysis of plasma samples from elderly depressed patients. (C) 2008 Elsevier B.V. All rights reserved.

Sambandet mellan bestrykningsrecepturoch sänkningen av ytansvithet vid UV-lackning

AssiDomän tillverkar kartong till förpackningsindustrin. Inom detta område är vitheten på kartongytanen viktig parameter. För att höja intrycket av förpackningen samt skapa en skyddande yta lackas ofta förpackningen med UV-lack efter tryck. Efter lackning kan då otryckta lackade ytor uppfattas som mindre vita. För att ta reda på om bestrykningssammansättningen har betydelse har ett fem olika bestrykningar blandats. Pigmenten som använts i bestrykningarna är karbonat, kaolin och titandioxidi olika kombinationer. Kartong har sedan bestrukits med dessa och därefter lackerats med UV-lack. Lackningen har gjorts i tre olika lackmängder. Mätningar har sedan gjorts gällande framförallt vithet. Den samverkan som sker mellan ljus, materialet och dess struktur är av stor vikt för att skapa en yta med goda optiska egenskaper. Resultaten i detta försök visar att lacken påverkar de optiska egenskaperna och framförallt vitheten. De lackerade ytorna fick en gulton efter lackering vilket kan ha att göra med lackens egenskaper. Vitheten hade en något mindre minskning för den bestrykning som bestod av karbonat och titandioxid. Skillnaden var dock mycket liten då alla bestrykningar fick en sänkning av vitheten med cirka 11-13 procentenheter oberoende av utgångsvärdet i vithet för respektive bestrykning innan lackning. Positivt var att det kunde konstateras att den bestrykning som hade det högsta vithetsvärdet före lackning också hade det efter lackning med ett normalt lackpålägg vilket betyder att en hög vithet är av betydelse även om den bestrukna ytan ska lackas. Den sänkning av vitheten som sker kan ha flera tänkbara orsaker. En tänkbar orsak kan vara att lacken förstör den porösa struktur som ger den viktiga ljusspridningen i bestrykningsskiktet. Resultaten visar också att lackens egenskaper tycks vara av stor betydelse. Den gulton som framträdde efter lackning tyder på en ökad absorption av vissa ljusvåglängder. Något som också pekar på detta är att alla fem bestrykningarna fick en liknande sänkning av vitheten. För att säga exakt vad som är orsaken eller vilken kombination som påverkar vitheten mest krävs ytterliggare tester. Olika UV-lacker kan testas eftersom endast en UV-lack har använts i dessa försök. En närmare studie av gränsyta mellan UV-lacken och bestrykningsskiktet bör också göras för att se hur lacken påverkar bestrykningsskiktets struktur.

Investigation of Iron (III) desferrioxamine B oxalate ligand exchange by UV-vis spectroscopy: the next step in developing a quantitative analytical method for measuring bioavailable iron in marine ecosystems

To date there are no analytical techniques designed to exclusively measure bioavailable iron in marine environments. The goal of this research is to develop such a technique by isolating the bioavailable iron using the terrestrial siderophore desferrioxamine B (DFB). This project contained many challenging aspects, but the specific goal of this study was to develop a robust analytical technique for quantification of Fe(III)-DFB complexes at nanomolar concentrations. Past work showed that oxalate (Ox) promotes photodissociation of Fe(III)-DFB to Fe(Il), and we are specifically interested in the mechanism of this process. A model was developed using known thermodynamic constants for Fe(III)-DFB and Fe(III) oxalato complexes and adjusting for ionic strength. The model was confirmed by monitoring the UV-VIS absorbance of the system at a variety of oxalate concentrations and pH. The model did not include ternary complexes. Next., the rate of Fe(1I) production during UV irradiation was examined. The results showed that the rate of Fe(II) production was based entirely on the [Fe(Ox)?]3- speciation, and that reoxidation of Fe(II) occurred via reactive oxygen intermediates. This reoxidation could be avoided by either decreasing the oxygen concentration or by adding a Fe(II) stabilizing reagent, such as ferrozine. Further studies need to be done to confirm that these results apply at sub nanomolar concentrations, and the issue of Fe(II) reoxidation at lower Fe concentrations needs to be addressed.

Filter-tipped Libraries

Is it possible to say something positive about Internet filtering in libraries and not have everyone, including your mother, call you a wild-eyed, hidebound, neo-Nazi bashi-bazouk? No, of course not, but I'm going to try to anyway.

Avaliação da transmitância direta de resinas compostas por meio de espectrofotometria de UV-visível

Este estudo avaliou as porcentagens de Transmitância direta (Td) das resinas compostas microhíbridas Charisma F, Solitaire II (Heraeus Kulzer ), Intens e Tetric Ceram (Ivoclar Vivadent) e nanoparticuladas Esthet-X (Dentsply De trey) e Filtek Supreme (3M Espe) nas cores Vita A3 (Dentina) e translúcido (Esmalte), ou seus correspondentes. Foram confeccionados três corpos-de-prova para cada material e cor, de formato quadrangular com 12x12 mm de lado e espessura de 1 mm. Após fotoativação, foram realizadas três leituras por corpo-de-prova em espectrofotômetro de UV-visível HP 8453 (Hewlett-Packard), com temperatura e umidade controladas (22±2°C/50±5%). Os ângulos de incidência e leitura em 0° / 0° foram utilizados para os comprimentos de onda de 400 a 700 nm. Os espectros obtidos foram analisados quanto ao percentual médio de Td para todo o espectro, em intervalos de 20 nm, e nos comprimentos de onda de 400, 560 e 700 nm. Através de ANOVA e teste de Tukey (p=0,01) encontrou-se que a resina composta Charisma obteve as maiores porcentagens de Td em todos os espectros, exceto para a cor Esmalte em 700 nm, que ficou abaixo da resina composta Esthet-X cor Esmalte. O teste t-Student demonstrou serem significativamente maiores os percentuais de Td para os espectros das cores Translúcido, exceto para as resinas compostas Supreme, em que não diferiram, e Charisma, com porcentagens de Td significativamente maiores para a cor Dentina. Por meio de teste não paramétrico de Friedman verificou-se que todas as resinas compostas estudadas demonstraram aumento significativo de Td com o aumento do comprimento de onda, com exceção da resina composta Solitaire, cores Dentina e Esmalte, que não demonstrou diferenças significativas nos comprimentos de onda de 560 e 700 nm.

Contribuição ao estudo do envelhecimento de ligantes asfálticos : influência da adição de polímeros e comportamento frente a radiação uv

A malha rodoviária brasileira apresenta-se, em sua maior extensão, em má condições de serventia. Uma das alternativas para se evitar deformações permanentes e trincamentos no pavimento é a adição, a quente e em reatores especiais, de polímeros ao asfalto. Esta prática já é realizada no Brasil há alguns anos, porém ainda não se tem um domínio do assunto, principalmente no caso da modificação de ligantes asfálticos brasileiros. O objetivo deste trabalho é avaliar a influência de algumas propriedades do polímero modificador no envelhecimento do ligante asfáltico modificado. Para tanto se realizou inicialmente um estudo sobre o mecanismo de envelhecimento de ligantes puros, inclusive frente a radiação ultravioleta do sol, e em seguida utilizou-se a mesma metodologia para avaliar o papel do polímero neste processo. Além disso, relacionou-se através de um projeto de experimentos a massa molar e teor de estireno do polímero SBS linear com suas propriedades clássicas, estabilidade, temperatura de transição vítrea e morfologia. Observou-se que a simulação de envelhecimento UV em laboratório, desenvolvida neste estudo, foi extremamente satisfatória. Os processos de foto-oxidação e termooxidação resultam em mecanismos diferentes de envelhecimento. A origem e composição química dos ligantes é de suma importância no mecanismo de envelhecimento UV destes. A massa molar e o teor de estireno do polímero modificador representam propriedades importantes para a estabilidade e durabilidade do ligante asfáltico modificado.

Localization of a mobile robot based on odometry and natural landmarks using extended kalman filter

SANTANA, André M.; SOUZA, Anderson A. S.; BRITTO, Ricardo S.; ALSINA, Pablo J.; MEDEIROS, Adelardo A. D. Localization of a mobile robot based on odometry and natural landmarks using extended Kalman Filter. In: INTERNATIONAL CONFERENCE ON INFORMATICS IN CONTROL, AUTOMATION AND ROBOTICS, 5., 2008, Funchal, Portugal. Proceedings... Funchal, Portugal: ICINCO, 2008.

Fenólicos totais, polifenoloxidade e coloração em abacate 'Hass' submetido a radiação UV-C

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)