Implicações do bullying no contexto escolar: percepção dos professores e a qualidade de vida dos adolescentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correntes críticas e comportamento dinâmico dos vórtices em fitas supercondutoras do tipo II com arranjos conformes de centros de aprisionamento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Implicações do bullying no contexto escolar: percepção dos professores e a qualidade de vida dos adolescentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

New constraints on H-0 and Omega(m) from SZE/X-ray data and baryon acoustic oscillations

The Hubble constant, H-0, sets the scale of the size and age of the Universe and its determination from independent methods is still worthwhile to be investigated. In this article, by using the Sunyaev-Zeldovich effect and X-ray surface brightness data from 38 galaxy clusters observed by Bonamente et al. (Astrophys J 647:25, 2006), we obtain a new estimate of H-0 in the context of a flat Lambda CDM model. There is a degeneracy on the mass density parameter (Omega(m)) which is broken by applying a joint analysis involving the baryon acoustic oscillations (BAO) as given by Sloan Digital Sky Survey. This happens because the BAO signature does not depend on H-0. Our basic finding is that a joint analysis involving these tests yield H-0 = 76.5(-3.33)(+3.35) km/s/mpc and Omega(m) = 0.27(-0.02)(+0.03). Since the hypothesis of spherical geometry assumed by Bonamente et al. is questionable, we have also compared the above results to a recent work where a sample of galaxy clusters described by an elliptical profile was used in analysis.

Adaptive T-spline refinement for isogeometric analysis in planar geometries

[EN]We present a new strategy, based on the meccano method [1, 2, 3], to construct a T-spline parameterization of 2D geometries for the application of isogeometric analysis. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between 2D objects and the parametric domain, the unit square. The key of the method lies in defining an isomorphic transformation between the parametric and physical T-mesh finding the optimal position of the interior nodes by applying a new T-mesh untangling and smoothing procedure. Bivariate T-spline representation is calculated by imposing the interpolation conditions on points sited both on the interior and on the boundary of the geometry…

Advances on T-spline parameterization based on the meccano method

[EN]We have recently introduced a new strategy, based on the meccano method [1, 2], to construct a T-spline parameterization of 2D and 3D geometries for the application of iso geometric analysis [3, 4]. The proposed method only demands a boundary representation of the geometry as input data. The algorithm obtains, as a result, high quality parametric transformation between the objects and the parametric domain, i.e. the meccano. The key of the method lies in de_ning an isomorphic transformation between the parametric and physical T-mesh _nding the optimal position of the interior nodes, once the meccano boundary nodes are mapped to the boundary of the physical domain…

Aspetti innovativi per la valutazione e la misura della porosità nei materiali dell'edilizia antica e moderna. La geometria frattale della porosità

New concepts on porosity appraisal in ancient and modern construction materials. The role of Fractal Geometry on porosity characterization and transport phenomena. This work studied the potential of Fractal Geometry to the characterization of porous materials. Besides the descriptive aspects of the pore size distribution, the fractal dimensions have led to the development of rational relations for the prediction of permeability coefficients to fluid and heat transfer. The research considered natural materials used in historical buildings (rock and earth) as well as currently employed materials as hydraulic cement and technologically advanced materials such as silicon carbide or YSZ ceramics. The experimental results of porosity derived from the techniques of mercury intrusion and from the image analysis. Data elaboration was carried out according to established procedures of Fractal Geometry. It was found that certain classes of materials are clearly fractal and respond to simple patterns such as Sierpinski and Menger models. In several cases, however, the fractal character is not recognised because the microstructure of the material is based on different phases at different dimensional scales, and in consequence the “fractal dimensions” calculated from porosimetric data do not come within the standard range (less than 3). Using different type and numbers of fractal units is possible, however, to obtain “virtual” microstructures that have the fraction of voids and pore size distribution equivalent with the experimental ones for almost any material. Thus it was possible to take the expressions for the permeability and the thermal conduction which does not require empirical “constants”, these expressions have also provided values that are generally in agreement with the experimental available data. More problematic has been the fractal discussion of the geometry of the rupture of the material subjected to mechanical stress both external and internal applied. The results achieved on these issues are qualitative and prone to future studies. Keywords: Materials, Microstructure, Porosity, Fractal Geometry, Permeability, Thermal conduction, Mechanical strength.

Bonded structures for enhanced damage tolerant pressurized fuselages

Adhesive bonding provides solutions to realize cost effective and low weight aircraft fuselage structures, in particular where the Damage Tolerance (DT) is the design criterion. Bonded structures that combine Metal Laminates (MLs) and eventually Selective Reinforcements can guarantee slow crack propagation, crack arrest and large damage capability. To optimize the design exploiting the benefit of bonded structures incorporating selective reinforcement requires reliable analysis tools. The effect of bonded doublers / selective reinforcements is very difficult to be predicted numerically or analytically due to the complexity of the underlying mechanisms and failures modes acting. Reliable predictions of crack growth and residual strength can only be based on sound empirical and phenomenological considerations strictly related to the specific structural concept. Large flat stiffened panels that combine MLs and selective reinforcements have been tested with the purpose of investigating solutions applicable to pressurized fuselages. The large test campaign (for a total of 35 stiffened panels) has quantitatively investigated the role of the different metallic skin concepts (monolithic vs. MLs) of the aluminum, titanium and glass-fiber reinforcements, of the stringers material and cross sections and of the geometry and location of doublers / selective reinforcements. Bonded doublers and selective reinforcements confirmed to be outstanding tools to improve the DT properties of structural elements with a minor weight increase. However the choice of proper materials for the skin and the stringers must be not underestimated since they play an important role as well. A fuselage structural concept has been developed to exploit the benefit of a metal laminate design concept in terms of high Fatigue and Damage Tolerance (F&DT) performances. The structure used laminated skin (0.8mm thick), bonded stringers, two different splicing solutions and selective reinforcements (glass prepreg embedded in the laminate) under the circumferential frames. To validate the design concept a curved panel was manufactured and tested under loading conditions representative of a single aisle fuselage: cyclic internal pressurization plus longitudinal loads. The geometry of the panel, design and loading conditions were tailored for the requirements of the upper front fuselage. The curved panel has been fatigue tested for 60 000 cycles before the introduction of artificial damages (cracks in longitudinal and circumferential directions). The crack growth of the artificial damages has been investigated for about 85 000 cycles. At the end a residual strength test has been performed with a “2 bay over broken frame” longitudinal crack. The reparability of this innovative concept has been taken into account during design and demonstrated with the use of an external riveted repair. The F&DT curved panel test has confirmed that a long fatigue life and high damage tolerance can be achieved with a hybrid metal laminate low weight configuration. The superior fatigue life from metal laminates and the high damage tolerance characteristics provided by integrated selective reinforcements are the key concepts that provided the excellent performances. The weight comparison between the innovative bonded concept and a conventional monolithic riveted design solution showed a significant potential weight saving but the weight advantages shall be traded off with the additional costs.

A planar Penning trap

In this thesis I present theoretical and experimental results concern- ing the operation and properties of a new kind of Penning trap, the planar trap. It consists of circular electrodes printed on an isolating surface, with an homogeneous magnetic field pointing perpendicular to that surface. The motivation of such geometry is to be found in the construction of an array of planar traps for quantum informa- tional purposes. The open access to radiation of this geometry, and the long coherence times expected for Penning traps, make the planar trap a good candidate for quantum computation. Several proposals for quantum 2-qubit interactions are studied and estimates for their rates are given. An expression for the electrostatic potential is presented, and its fea- tures exposed. A detailed study of the anharmonicity of the potential is given theoretically and is later demonstrated by experiment and numerical simulations, showing good agreement. Size scalability of this trap has been studied by replacing the original planar trap by a trap twice smaller in the experimental setup. This substitution shows no scale effect apart from those expected for the scaling of the parameters of the trap. A smaller lifetime for trapped electrons is seen for this smaller trap, but is clearly matched to a bigger misalignment of the trap’s surface and the magnetic field, due to its more difficult hand manipulation. I also give a hint that this trap may be of help in studying non-linear dynamics for a sextupolarly perturbed Penning trap.

The Universe 10 Billion years ago: Morphologies, Star-formation rates and Galactic-scale winds in z ∼ 2 Galaxies

This thesis is devoted to the study of the properties of high-redsfhit galaxies in the epoch 1 < z < 3, when a substantial fraction of galaxy mass was assembled, and when the evolution of the star-formation rate density peaked. Following a multi-perspective approach and using the most recent and high-quality data available (spectra, photometry and imaging), the morphologies and the star-formation properties of high-redsfhit galaxies were investigated. Through an accurate morphological analyses, the built up of the Hubble sequence was placed around z ~ 2.5. High-redshift galaxies appear, in general, much more irregular and asymmetric than local ones. Moreover, the occurrence of morphological k-­correction is less pronounced than in the local Universe. Different star-formation rate indicators were also studied. The comparison of ultra-violet and optical based estimates, with the values derived from infra-red luminosity showed that the traditional way of addressing the dust obscuration is problematic, at high-redshifts, and new models of dust geometry and composition are required. Finally, by means of stacking techniques applied to rest-frame ultra-violet spectra of star-forming galaxies at z~2, the warm phase of galactic-scale outflows was studied. Evidence was found of escaping gas at velocities of ~ 100 km/s. Studying the correlation of inter-­stellar absorption lines equivalent widths with galaxy physical properties, the intensity of the outflow-related spectral features was proven to depend strongly on a combination of the velocity dispersion of the gas and its geometry.

Volumenpackungen nach SAE J1100

We present new algorithms to approximate the discrete volume of a polyhedral geometry using boxes defined by the US standard SAE J1100. This problem is NP-hard and has its main application in the car design process. The algorithms produce maximum weighted independent sets on a so-called conflict graph for a discretisation of the geometry. We present a framework to eliminate a large portion of the vertices of a graph without affecting the quality of the optimal solution. Using this framework we are also able to define the conflict graph without the use of a discretisation. For the solution of the maximum weighted independent set problem we designed an enumeration scheme which uses the restrictions of the SAE J1100 standard for an efficient upper bound computation. We evaluate the packing algorithms according to the solution quality compared to manually derived results. Finally, we compare our enumeration scheme to several other exact algorithms in terms of their runtime. Grid-based packings either tend to be not tight or have intersections between boxes. We therefore present an algorithm which can compute box packings with arbitrary placements and fixed orientations. In this algorithm we make use of approximate Minkowski Sums, computed by uniting many axis-oriented equal boxes. We developed an algorithm which computes the union of equal axis-oriented boxes efficiently. This algorithm also maintains the Minkowski Sums throughout the packing process. We also extend these algorithms for packing arbitrary objects in fixed orientations.

Reaktivität von Dihypersilylhalogenorganylplumbanen

Organylhalogenide RX reagieren formal gemäß einer oxidativen 1,1-Addition mit Dihypersilylplumbylen) PbHyp2 zu Dihypersilyl-halogenorganylplumbanen PbHyp2RX. Diese Umsetzung gelingt mit nahezu allen untersuchten Organylresten, lediglich beispielsweise der Mesitylrest erweist sich als zu sperrig (R = Me, Et, nPr, iPr, tBu, Hx, cHx, Ad, Ph, C6F5, oTo, mTo, pTo, Naph, Anthr).rnrnFür einige Halogenorganyle wird eine analoge Addition auch an das zinnhomologe Dihypersilylstannylen beschrieben.rnrnDie untersuchten Addukte sind thermisch und gegenüber UV-Strahlung, Sauerstoff und Wasser deutlich weniger empfindlich als vergleichbare andere blei- und zinnorganische Verbindungen.rnrnUmfangreiche NMR-Datensätze beschreiben eine markante Hoch-feldverschiebung der Hypersilylprotonen beim Übergang von PbHyp2 hin zu PbHyp2RX, die für Arylreste stärker ausfällt als für Alkylreste.rnrnEin Großteil der Addukte wurde einkristallin erhalten und wird anhand der röntgendiffraktometrisch ermittelten Strukturparameter detailliert charakterisiert. rnrnEs finden sich gegenüber dem idealen Tetraderwinkel auffällig stark aufgeweitete Si Pb Si-Winkel von 130-143°, während die anderen Winkel mehrheitlich unter dem theoretischen Idealwert bleiben (Si Pb X: 94 103°; Si Pb C: 98-112°; C Pb X: 95-103°). Insbesondere größere, weichere Reste und planare Arylplumbane rücken näher an das Halogen heran.rnDie insgesamt recht hohen Blei-Halogen-Abstände nehmen von den Chloriden hin zu den Iodiden zu. Die Iodoplumbane zeigen dabei generell die kleinsten Pb Si und die größten Pb C Abstände. Alkylplumbane weisen längere Pb C Bindungen auf als ansonsten vergleichbare Arylplumbane.rnrnViele der gefundenen Molekülstrukturen zeigen Anzeichen hoher sterischer Spannung in Form von Substituentenverzerrungen. rnrnDie Bildungsgeschwindigkeit der Addukte ist auch bei tiefen Temperaturen hoch. Sie nimmt von X = Cl über Br hin zu I zu und ist für Alkylreste höher als für Aryle. Die Zerfallsgeschwindigkeiten verhalten sich genau entgegengesetzt. Bei den Thermolysen wird regelmäßig Hypersilylhalogenid eliminiert. Dabei entstehen in Abwesenheit koordinierender Solventien Dihypersilyl-diorganylplumbane PbHyp2R2.rnAndere, unbekannte Zerfallskanäle führen zu unerwarteten Produkten, wie dem Iodonium-verbrückten, cyclischen Tetraplumbetan Pb4I(C6F5)Hyp3.rnrnIn Anwesenheit von Lewis-Basen hingegen können sich hetero-leptische Plumbylene bilden, wie am Beispiel eines Bitolyldiylbisplumbylens gezeigt wird. Dieses zeigt auch, dass prinzipiell eine zweifache Addition von Dihalogenorganylen an zwei Äqui-valente Dihypersilylplumbylen möglich ist. Entsprechende Untersuchungen beschäftigen sich ausführlich mit dafür geeigneten und ungeeigneten Organdiylresten.rnrnUnter günstigen reduktiven Bedingungen lassen sich mittels Metal-lierungsreagenz aus den Dihypersilylhalogenorganylplumbanen unter Halogenidentzug Plumbanide erhalten, die in Form getrennter Ionenpaare isolierbar sind. Diese lassen sich in Ana-logie zu den zuvor beschriebenen Plumbanen ebenfalls als Addukt aus Dihypersilylplumbylen und Lithiumorganylen darstellen.rnrnUnter geeigneten speziellen Bedingungen sind neben metallierten auch formal hydridierte Halogenplumbanide zugänglich.rnrnEntsprechend einer geringen Hybridisierung am zentralen Blei-atom, also eines hohen p-AO-Charakters der bindenden Molekülorbitale und s-AO-Charakters des LEP-Orbitals ergeben sich keine trigonal-planaren, sondern Strukturen mit Substituenten-winkeln sogar nahe bei 90°. Die Bindungslängen zum Blei sind deutlich größere als bei den entsprechenden Halogenplumbanen.rnrnEin besonderes Augenmerk der Arbeit liegt auf der Betrachtung von langlebigen und persistenten heteroleptischen Plumbyl-Radikalen, die durch milde Oxidation mittels PbNsi23) aus den Dihypersilylorganylplumbaniden erhalten werden. Während bislang nur homoleptische Vertreter bekannt waren, die aufgrund des sterischen Anspruchs der Substituenten und aufgrund von Hyperkonjugation von axialsymmetrischer nahezu planarer Geometrie sind, findet sich für die heteroleptischen Plumbyle dieser Arbeit eine stärker pyramidale Geometrie. Ausführlich diskutierte EPR-Experimente liefern Spektren, die gut mit Simulationen für die entsprechenden Radikale übereinstimmen.rnrnDie im Zentrum der Betrachtungen dieser Arbeit stehenden Dihypersilylhalogenorganylplumbane stellen somit einen aussichtsreichen und darüber hinaus persistenten und gut zu handhabenden Ausgangspunkt bei der Darstellung neuartiger und interessanter Spezies dar.

Transform Tectonics and Non-Volcanic Oceanic Islands

Oceanic islands can be divided, according to their origin, in volcanic and tectonic. Volcanic islands are due to excess volcanism. Tectonic islands are mainly formed due to vertical tectonic motions of blocks of oceanic lithosphere along transverse ridges flanking transform faults at slow and ultraslow mid-ocean ridges. Vertical tectonic motions are due to a reorganization of the geometry of the transform plate boundary, with the transition from a transcurrent tectonics to a transtensive and/or transpressive tectonics, with the formation of the transverse ridges. Tectonic islands can be located also at the ridge–transform intersection: in this case the uplift is due by the movement of the long-lived detachment faults located along the flanks of the mid-ocean ridges. The "Vema" paleoisland (equatorial Atlantic) is at the summit of the southern transverse ridge of the Vema transform. It is now 450 m bsl and it is capped by a carbonate platform 500 m-thick, dated by 87Sr/86Sr at 10 Ma. Three tectonic paleoislands are on the summit of the transverse ridge flanking the Romanche megatrasform (equatorial Atlantic). They are now about 1,000 m bsl and they are formed by 300 m-thick carbonate platforms dated by 87Sr/86Sr, between 11 and 6 Ma. The tectonic paleoisland “Atlantis Bank" is located in the South-Western Indian Ridge, along the Atlantis II transform, and it is today 700 m bsl. The only modern example of oceanic tectonics island is the St. Paul Rocks (equatorial Atlantic), located along the St. Paul transform. This archipelago is the top of a peridotitic massif that it is now a left overstep undergoing transpression. Oceanic volcanic islands are characterized by rapid growth and subsequent thermal subsidence and drowning; in contrast, oceanic tectonic islands may have one or more stages of emersion related to vertical tectonic events along the large oceanic fracture zones.

Deriving Deligne-Mumford stacks with perfect obstruction theories

Intersection theory on moduli spaces has lead to immense progress in certain areas of enumerative geometry. For some important areas, most notably counting stable maps and counting stable sheaves, it is important to work with a virtual fundamental class instead of the usual fundamental class of the moduli space. The crucial prerequisite for the existence of such a class is a two-term complex controlling deformations of the moduli space. Kontsevich conjectured in 1994 that there should exist derived version of spaces with this specific property. Another hint at the existence of these spaces comes from derived algebraic geometry. It is expected that for every pair of a space and a complex controlling deformations of the space their exists, under some additional hypothesis, a derived version of the space having the chosen complex as cotangent complex. In this thesis one version of these additional hypothesis is identified. We then show that every space admitting a two-term complex controlling deformations satisfies these hypothesis, and we finally construct the derived spaces.

Studio fluidodinamico di un reattore continuo agitato meccanicamente tramite tecniche PIV e PLIF

The study and understanding of the motion of the fluid phases in a mechanically stirred reactor has always been, and still are, an open problem which absorbs the study and the work of many researchers. In recent decades, thanks to the growing opportunities offered by the development of technology, we have made great strides in the understanding of mixing, one of the major unit operations at the base of many industrial processes. A complete understanding of this process and its optimization for industrial applications is a challenging task due to the complex interactions between the many factors at play that include physical, chemical and biological. The purpose of this thesis is the study of a fluid-mechanically-agitated continuous reactor through the use of optical diagnostic techniques, which allowed to determine the range of motion and the time of perfect homogenization in a reactor of standard geometry in different operating conditions.