A new species of the Bokermannohyla pseudopseudis group from central Bahia, Brazil (Amphibia, Hylidae)

A new species of treefrog is described from Chapada Diamantina in the central State of Bahia, Brazil. The new species is a member of the Bokermannohyla pseudopseudis group, characterized by its small to medium size, head as long as wide, snout short, rounded in dorsal view and nearly truncate in lateral view, eyes and tympanum large, and forearm and prepollex well developed. The new species can be distinguished from the other species of the B. pseudopseudis group by its voice and the shape of its head and snout. it is smaller than B. saxicola and B. pseudopseudis, and has a less developed forearm and prepollex than B. ibitiguara males. The tadpole and vocalizations are described and information on natural history is provided.

Ferroelectric and dielectric properties of lanthanum-modified bismuth titanate thin films obtained by the polymeric precursor method

Lanthanum-modified bismuth titanate, Bi4-xLaxTi3O12 (BLT), thin films with a La concentration of 0.75 was grown on Pt/Ti/SiO2/Si substrates by using the polymeric precursor solution and spin-coating method. The scanning electron microscopy (SEM) showed rounded grains, which is not typical for these system. The BLT films showed well-saturated polarization-electric field curve which 2P(r) = 41.4 muC/cm(2) and V-c = 0.99 V. The capacitance dependence on the voltage is strongly nonlinear, confirming the ferroelectric properties of the film resulting from the domains switching. These properties make BLT a promising material for FERAM applications.

Vertical marginal discrepancy of ceramic copings with different ceramic materials finish lines and luting agents: An in vitro evaluation

Statement of problem. Prosthetic restorations that fit poorly may affect periodontal health and occlusion. Studies that have evaluated the accuracy of fit of ceramic restorations before and after cementation assessed primarily intracoronal restorations.Purpose. This in vitro study evaluated the effect of different finish lines, ceramic manufacturing techniques, and luting agents on the vertical discrepancy of ceramic copings.Material and methods. Two stainless steel molars were prepared for complete crowns with 2 different finish lines (heavy chamfer and rounded shoulder); each molar was duplicated to fabricate 90 copings. A total of 180 copings generated 18 groups (n=10 for each finish line-coping material-luting agent combination). Luting agents tested included zinc phosphate, resin-modified glass ionomer (Fuji Plus), and resin composite cements (Panavia F). A metal frame was developed on which to screw the stainless steel model and a ceramic coping; the distance (mum) between 2 predetermined points was measured before and after cementation by a profile projector under a torquing force. A 4-way ANOVA with repeated measurements was performed to assess the influence of each factor in the vertical marginal discrepancy: 3 between-coping factors (finish line-coping material-luting agent) and 1 within-coping factor (before and after cementation) (alpha=.05).Results. Procera copings presented the lowest mean values (P<.05) of vertical marginal discrepancy before and after cementation (25/44 mum) when compared to Empress 2 (68/110 mum) and InCeram Alumina copings (57/117 mum), regardless of any combinations among all finish lines and luting agents tested.Conclusion. Considering each factor separately, the ceramic manufacturing technique appeared to be the most important factor tested for the definitive vertical discrepancy of all-ceramic copings, with lower mean values for Procera copings.

Development of a pressure nociceptive threshold testing device for evaluation of analgesics in cats

A pressure analgesiometric device was developed for unrestrained cats. Eleven cats were studied. Stimulation was via three rounded pins within a bracelet on the forearm. The pins were advanced by manual bladder inflation. Bladder pressure was measured using a strain gauge pressure transducer. The threshold was recorded at the behavioural end point. Thresholds were measured at 5 and 15 min intervals for 2-4 h, after removal/replacement of the cuff, for 120 min after SC butorphanol (0.4 mg/kg), and with mild skin inflammation at the testing site. Data were analysed using ANOVA. Pressure thresholds in untreated cats were around 150 mmHg. The minimum interval for testing was established as 15 min. Data were reproducible over 4 h and beyond 24 h. Thresholds in 5 cats increased (P < 0.05) above baseline for 45 min after butorphanol with a maximum increase of 270 +/- 182 mmHg at 10 min. Thresholds decreased with inflammation. The method appears suitable for feline analgesia investigations. (c) 2006 Elsevier Ltd. All rights reserved.

The influence of cervical finish line, internal relief, and cement type on the cervical adaptation of metal crowns

Objective: the aim of this investigation was to evaluate the cervical adaptation of metal crowns under several conditions, namely (1) variations in the cervical finish line of the preparation, (2) application of internal relief inside the crowns, and (3) cementation using different luting materials. Method and Materials: One hundred eighty stainless-steel master dies were prepared simulating full crown preparations: 60 in chamfer (CH), 60 in 135-degree shoulder (OB), and 60 in rounded shoulder (OR). The finish lines were machined at approximate dimensions of a molar tooth preparation (height: 5.5 mm; cervical diameter: 8 mm; occlusal diameter: 6.4 mm; taper degree: 6; and cervical finish line width: 0.8 mm). One hundred eighty corresponding copings with the same finish lines were fabricated. A 30-mu m internal relief was machined 0.5 mm above the cervical finish line in 90 of these copings. The fit of the die and the coping was measured from all specimens (L0) prior to cementation using an optical microscope. After manipulation of the 3 types of cements (zinc phosphate, glass-ionomer, and resin cement), the coping was luted on the corresponding standard master die under 5-kgf loading for 4 minutes. Vertical discrepancy was again measured (L1), and the difference between L1 and L0 indicated the cervical adaptation. Results: Significant influence of the finish line, cement type, and internal relief was observed on the cervical adaptation (P < .001). The CH type of cervical finish line resulted in the best cervical adaptation of the metal crowns regardless of the cement type either with or without internal relief (36.6 +/- 3 to 100.8 +/- 4 mu m) (3-way analysis of variance and Tukey's test, alpha = .05). The use of glass-ionomer cement resulted in the least cervical discrepancy (36.6 +/- 3 to 115 +/- 4 mu m) than those of other cements (45.2 +/- 4 to 130.3 +/- 2 mu m) in all conditions. Conclusion: the best cervical adaptation was achieved with the chamfer type of finish line. The internal relief improved the marginal adaptation significantly, and the glass-ionomer cement led to the best cervical adaptation, followed by zinc phosphate and resin cement.

Histochemical study of the extensor digitorum longus and soleus muscles in alcoholic rats

The extensor digitorum longus (EDL) and soleus (SOL) muscle fibres from albino rats submitted to experimental chronic alcoholism were evaluated in accordance with their metabolic and morphometric profiles. Twenty-seven male animals aged 4 months and weighing approximately 400 g were used. The animals were divided into three groups: control, isocaloric and alcoholic and sacrifices were carried out after 5, 10 and 15 months. The muscles were dissected, removed, cross-sectioned in a cryostat and submitted to the NADH (nicotinamide adenine dinucleotide) reaction. The SO (slow-twitch-oxidative), FG (fast-twitch-glycolytic) and FOG (fast-twitch-oxidative-glycolytic) muscle fibre types exhibited a polygonal, triangular or rounded shape and did not present noteworthy modifications in either muscles during the study. The cross-sectional areas of the fibres from the studied muscles did not present significant differences during the observations. Fibre area behaved similarly in the alcoholic animals up to the 10th month, i.e. it was decreased, as also observed in the other groups. At 15 months, however, all fibres were increased, with a predominance of FG fibres in the SOL muscle. Changes in fibre population were observed mainly in the SOL muscle of alcoholic animals: SO fibres were initially increased in number but decreased after the 10th month, and the opposite was observed for the population of FG fibres. FOG fibres increased linearly in number throughout the experiment. The statistical analysis showed nevertheless that the fibre population and cross-sectional area changes were not significant. In the alcoholic animals quantitative variations of muscle fibres were more evident in the SOL muscle, suggesting that the SOL muscle is more sensitive to the toxic action of ethanol. The results concerning the increased fibre diameter in alcoholic animals would be associated with muscle oedema induced directly or indirectly by the ethanol.

HYLA-LUCTUOSA, A NEW TREEFROG FROM SOUTHEASTERN BRAZIL (AMPHIBIA, HYLIDAE)

A new species of treefrog, Hyla luctuosa, is described from the Serra do Japi in southeastern Brazil. The new species is a member of the Hyla circumdata group characterized by large size, large tympanum, and rounded subarticular tubercles on the fingers. Descriptions of the tadpole and advertisement call and information on natural history are provided.

Effects of light-curing time on the cytotoxicity of a restorative resin composite applied to an immortalized odontoblast-cell line

This in vitro study evaluated the cytotoxic effects of a restorative resin composite applied to an immortalized odontoblast-cell line (MDPC-23). Seventy-two round resin discs (2-mm thick and 4 mm in diameter) were light-cured for 20 or 40 seconds and rinsed, or not, with PBS and culture medium. The resin discs were divided into four experimental groups: Group 1: Z-100/20 seconds; Group 2: Z-100/20 seconds/rinsed; Group 3: Z100/40 seconds; Group 4: Z-100/40 seconds/rinsed. Circular filter paper was used as a control material (Group 5). The round resin discs and filter papers were placed in the bottom of wells of four 24-well dishes (18 wells for each experimental and control group). MDPC-23 cells (30,000 cells/cm(2)) were plated in the wells and allowed to incubate for 72 hours. The zone of inhibition around the resin discs was measured under inverted light microscopy; the MTT assay was carried out for mitochondrial respiration and cell morphology was measured under SEM. The scores obtained from inhibition zone and MTT assay were analyzed with the Kruskal-Wallis followed by Dunnett tests. In Groups 1, 2, 3 and 4, the thickness of the inhibition zone was 1,593 +/- 12.82 mum, 403 +/- 15.49 mum, 1,516 +/- 9.81 mum and 313 +/- 13.56 mum, respectively. There was statistically significant difference among the experimental and control groups at the 0.05 level of significance. The MTT assay demonstrated that the resin discs of the experimental groups 1, 2, 3 and 4 reduced the cell metabolism by 83%, 40.1%, 75.5% and 24.5%. Only between the Groups 2 and 4 was there no statistically significant difference for mitochondrial respiration. Close to the resin discs, the MDPC-23 cells exhibited rounded shapes, with only a few cellular processes keeping the cells attached to the substrate or, even disruption of plasma membrane. Adjacent to the inhibition zone, the cultured cells exhibited multiple fine cellular processes on the cytoplasmic membrane organized in epithelioid nodules, similar to the morphology observed to the control group. Based on the results, the authors may conclude that the Z-100 resin composite light cured for 20 seconds was more cytopathic to MDPC-23 cells than Z-100 light cured for 40 seconds. The cytotoxic effects of the resin discs decreased after rinsing them with PBS and culture medium. This was confirmed by MTT assay and upon evaluation of the inhibition zone, which was narrower following rinsing of the resin discs.

High hydrostatic pressure processing on microstructure of probiotic low-fat yogurt

The effect of milk processing on the microstructure of probiotic low-fat yogurt was studied. Skim milk fortified with skim milk powder was subjected to three treatments prior to innoculation: thermal treatment at 85 degrees C for 30 min, high hydrostatic pressure at 676 MPa for 5 min, and combined treatments of high hydrostatic pressure (HHP) and heat. The processed milk was then fermented by using two different starter cultures containing Streptococcus thermophilus, Lactobacillus delbrueckii ssp. bulgaricus, Lactobacillus acidophilus, and Bifidobacterium longum. The microstructure of heat-treated milk yogurt had fewer interconnected chains of irregularly shaped casein micelles, forming a network that enclosed the void spaces. on the other hand, microstructure of HHP yogurt had more interconnected clusters of densely aggregated protein of reduced particle size, with an appearance more spherical in shape, exhibiting a smoother more regular surface and presenting more uniform size distribution. The combined HHP and heat milk treatments led to compact yogurt gels with increasingly larger casein micelle clusters interspaced by void spaces, and exhibited a high degree of cross-linking. The rounded micelles tended to fuse and form small irregular aggregates in association with clumps of dense amorphous material, which resulted in improved gel texture and viscosity. (C) 2007 Elsevier Ltd. All rights reserved.

A New Species of Proceratophrys (Anura: Cycloramphidae) from Midwestern Brazil

We describe adult morphology, advertisement call, and natural history aspects of a new frog species from riparian habitats alongside intermittent headwater streams in southwestern Cerrado, the second largest biome in Brazil. Presently known from three localities in Mato Grosso State, the new species belongs to the Proceratophrys cristiceps group. It is characterized mainly by small size (adult snout vent length approximately 46 mm), snout rounded in dorsal view and obtuse in lateral view, absence of flared lips, dorsal skin granular, and absence of both postocular swellings and prominent palpebral appendages. The advertisement call of the new species consists of a single note with 19-25 pulses. Calls are repeated at mean intervals of 0.7 sec. Mean dominant frequency is 1,250.2 Hz, with ascendant modulation.

Structural and electrical properties of SrBi2(Ta0.5Nb0.5)(2)O-9 thin films

SrBi2(Ta0.5Nb0.5)(2)O-9 (SBTN) thin films were obtained by polymeric precursor method on Pt/Ti/SiO2/Si(1 0 0) substrates. The film is dense and crack-free after annealing at 700 degrees C for 2 h in static air. Crystallinity and morphological characteristic were examined by X-ray diffraction (XRD), field emission scanning electron microscopy (FEG-SEM) and atomic force microscopy (AFM). The films displayed rounded grains with a superficial roughness of 3.5 nm. The dielectric permittivity was 122 with loss tangent of 0.040. The remanent polarization (P-r) and coercive field (E-c) were 5.1 mu C/cm(2) and 96 kV/cm, respectively. (C) 2007 Published by Elsevier B.V.

The minimum quantity of lubricant (MQL) technique in the surface grinding of steel

This research aimed to analyze the viability of the minimum quantity of lubricant (MQL) technique towards different methods of lubri-refrigeration in surface grinding of steel, considering process quality, wheel life and the viability of using cutting fluids The proposal methods were the conventional (abundant fluid flow), the minimum quantity lubrication (MQL) and the optimized method with Webster nozzle (rounded) This analysis was carried out in equal machining conditions, through the assessment of variables such as grinding force, surface roughness, G ratio (volume of removed material/volume of wheel wear), and microhardness The results showed the possibility of improvement of the grinding process Besides, there is the opportunity for production of high quality workpieces with lower costs The MQL technique showed efficiency in machining with lower depths of cut The optimized method with Webster nozzle applies the fluid in a rational way, without considerable waste Hence, the results show that industry can rationalize and optimize the application of cutting fluids, avoiding inappropriate disposal, inadequate use and consequently environment pollution

Comparative larval morphology of eight species of Hypsiboas Wagler (Amphibia, Anura, Hylidae) from Argentina and Uruguay, with a review of the larvae of this genus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spermatogenesis and nucleolar behavior in males of aquatic Heteroptera

Aspects of spermatogenesis and nucleolar behavior were analyzed in Brachymetra albinerva, Cylindrostethus palmaris, Halobatopsis platensis, Limnogonus aduncus (Gerridae), Martarega sp (Notonectidae), Rhagovelia whitei, and Rhagovelia sp (Veliidae). The testicles are rounded (Veliidae), elongated (Gerridae) or spiral (Notonectidae) and have a transparent membrane covering them. The complement chromosome was 2n = 23 (22A + X0, L. aduncus and Rhagovelia sp), 25 (24A + X0, B. albinerva and H. platensis), 26 (22A + 2m + XY, Martarega sp), 29 (28A + X0, C. palmaris), or 39 (38A + X0, R. whitei) chromosomes, and the only species with a different sex chromosome system was Martarega sp, which showed an XY system and m-chromosomes. The meiotic behavior of all species was similar: holocentric chromosomes and heteropyknotic material at prophase, interstitial and/or terminal chiasmata, and first reductional division for the autosomes and the reverse for the sex chromosomes. The only difference observed was related to the very large size of Martarega sp cells in all stages of spermatogenesis. With regard to nucleolar behavior, the species did not show differences, except for Martarega sp with larger nucleoli than the other species. The only species in which it was clearly possible to identify the nucleolar organizer region was L. aduncus, in the region of a terminal autosome. It was also confirmed that the telomeric associations do not occur at random. In the other species, specific staining was very discrete, and the nucleolar organizer region location was not at all evident.

Foreign body in the tracheobronchial tree

A 20-year experience with the treatment of 74 patients (83.8% children) for foreign body aspiration is reviewed. The object of this review is to show the clinical manifestations, the radiological findings, the nature and distribution in the bronchial tree, and complications due to longstanding (months or years) foreign bodies in the bronchial tree. The most common foreign bodies found were peanuts (13.5%), corn (13.5%), and beans (13.5%). The most frequent clinical manifestation was choking (67.5%), and the most frequent radiological finding was atelectasis (41.8%). The most serious complication was bronchiectasis needing resection in six patients who had the foreign body retained for years in the bronchial tree. In conclusion, in spite of an obvious foreign body in the tracheobronchial tree many cases are not diagnosed, and a longstanding foreign body in the airway may be responsible for irreversible complications.