Pavement and alignment design of a new rural road in the province of Bologna

This thesis aims to give a general view of pavement types all over the world, by showing the different characteristics of each one and its different life steps starting from construction, passing by maintenance and arriving until recycling phase. The flexible pavement took the main part of this work because it has been used in the last part of this thesis to design a project of a rural road. This project is located in the province of Bologna-Italy (‘Comune di Argelato’, 26 km in the north of Bologna), and has 5677, 81 m of length. A pavement design was made using the program BISAR 3.0 and a fatigue life study was made, also, in order to estimate the number of loads (in terms of heavy vehicles axle) to cause road’s failure . An alignment design was made for this project and a safety study was established in order to check if the available sight distance at curves respects the safety norms or not, by comparing it to the stopping sight distance. Different technical sheets are demonstrated and several cases are discussed in order to clarify the main design principles and underline the main hazardous cases to be avoided especially at intersection. This latter, its type’s choice depends on several factors in order to make the suitable design according to the environmental data. At this part of the road, the safety is a primordial point due to the high accident rate in this zone. For this reason, different safety aspects are discussed especially at roundabouts, signalized intersections, and also some other common intersection types. The design and the safety norms are taken with reference to AASHTO (American Association of State Highway and Transportation Officials), ACT (Transportation Association of Canada), and also according to Italian norms (Decreto Ministeriale delle Starde).

Sparse Signal Representation of Ultrasonic Signals for Structural Health Monitoring Applications

Assessment of the integrity of structural components is of great importance for aerospace systems, land and marine transportation, civil infrastructures and other biological and mechanical applications. Guided waves (GWs) based inspections are an attractive mean for structural health monitoring. In this thesis, the study and development of techniques for GW ultrasound signal analysis and compression in the context of non-destructive testing of structures will be presented. In guided wave inspections, it is necessary to address the problem of the dispersion compensation. A signal processing approach based on frequency warping was adopted. Such operator maps the frequencies axis through a function derived by the group velocity of the test material and it is used to remove the dependence on the travelled distance from the acquired signals. Such processing strategy was fruitfully applied for impact location and damage localization tasks in composite and aluminum panels. It has been shown that, basing on this processing tool, low power embedded system for GW structural monitoring can be implemented. Finally, a new procedure based on Compressive Sensing has been developed and applied for data reduction. Such procedure has also a beneficial effect in enhancing the accuracy of structural defects localization. This algorithm uses the convolutive model of the propagation of ultrasonic guided waves which takes advantage of a sparse signal representation in the warped frequency domain. The recovery from the compressed samples is based on an alternating minimization procedure which achieves both an accurate reconstruction of the ultrasonic signal and a precise estimation of waves time of flight. Such information is used to feed hyperbolic or elliptic localization procedures, for accurate impact or damage localization.

Komparative Analyse der humanen Chromosomenregion 11p15.3 um die Gene LMO1,TUB und der orthologen Region in der Maus

Ziel der vorliegenden Arbeit war die vergleichende Sequenzierung und nachfolgende Analyse des syntänen chromosomalen Abschnitts auf dem kurzen Arm des humanen Chromosoms 11 in der Region 11p15.3 mit den Genen LMO1, TUB und dem orthologen Genomabschnitt der Maus auf Chromosom 7 F2. Die im Rahmen dieser Arbeit durchgeführte Kartierung dieser beiden chromosomalen Bereiche ermöglichte die Komplettierung einer genomischen Karte auf insgesamt über eine Megabase, die im Kooperationssequenzierprojekt der Universitäts-Kinderklinik und dem Institut für Molekulargenetik in Mainz erstellt wurde. Mit Hilfe von 28 PAC- und Cosmid-Klonen konnten in dieser Arbeit 383 kb an genomischer DNA des Menschen und mit sechs BAC- und PAC-Klonen 412 kb an genomischer DNA der Maus dargestellt werden. Dies ermöglichte erstmals die exakte Festlegung der Reihenfolge der in diesem chromosomalen Abschnitt enthaltenen Gene und die genaue Kartierung von acht STS-Markern des Menschen, bzw. vier STS-Sonden der Maus. Es zeigte sich dabei, dass die chromosomale Orientierung telomer-/centromerwärts des orthologen Bereichs in der Maus im Vergleich zum Menschen in invertierter Ausrichtung vorliegt. Die Sequenzierung von drei humanen Klonen ermöglichte die Bestimmung von 319.119 bp an zusammenhängender genomischer DNA. Dadurch konnte die genaue Lokalisation und Strukturaufklärung der Gene LMO1, ein putatives Tumorsuppressorgen, das mit der Entstehung von Leukämien assoziiert ist, und TUB, ein Transkriptionsmodulator, der in die Fettstoffwechselregulation involviert ist, vorgenommen werden. Für das murine Genom wurden 412.827 bp an neuer DNA-Sequenz durch Sequenzierung von ebenfalls drei Klonen generiert. Der im Vergleich zum Menschen ca. 100 kb größere Genombereich beinhaltete zudem die neuen Gene Stk33 und Eif3. Es handelte sich dabei um zwei Gene, die erst im Rahmen dieser Arbeit entdeckt und charakterisiert wurden. Die parallele Bearbeitung beider Genombereiche ermöglichte eine umfassende komparative Analyse nach kodierenden, funktionellen und strukturgebenden Sequenzabschnitten in beiden Spezies. Es konnten dabei für beide Organismen die Exon-Intron-Strukturen der Gene LMO1/Lmo1 und TUB/Tub geklärt. Zudem konnten vier neue Exons und zwei neue speziesspezifischer Spleißvarianten für TUB/Tub beschrieben werden. Die Identifizierung dieser neuen Spleißvarianten offenbart neue Möglichkeiten für alternative Regulation und Funktion, oder für eine veränderte Proteinstruktur, die weitere Erklärungsansätze für die Entstehung der mit diesen Genen assoziierten Erkrankungen zulässt. In der sequenzierten, größeren Genomsequenz der Maus konnte in den flankierenden, nicht mit der sequenzierten Humansequenz überlappenden Bereich das neue Gen Eif3 in seiner Exon-Intron-Struktur und die beiden letzten Exons 11 und 12 des Gens Stk33 kartiert und charakterisiert werden. Die umfangreiche Sequenzanalyse beider sequenzierter Genombereiche ergab für den Abschnitt des Menschen insgesamt 229 potentielle Exonsequenzen und für den Bereich der Maus 527 mögliche Exonbereiche. Davon konnten beim Menschen explizit 21 Exons und bei der Maus 31 Exons als exprimierte Bereiche identifiziert und experimentell mittels RT-PCR, bzw. durch cDNA-Sequenzierung verifiziert werden. Diese Abschnitte beschrieben nicht nur die Exonbereiche der oben genannten vier Gene, sondern konnten auch neuen nicht weiter definierten EST-Sequenzen zugeordnet werden. Mittels des Interspeziesvergleiches war darüber hinaus auch die Analyse der nichtkodierenden Intergen-Bereiche möglich. So konnten beispielsweise im ersten Intron des LMO1/Lmo1 sieben Sequenzbereiche mit Konservierungen von ca. 90% bestimmt werden. Auch die Charakterisierung von Promotor- und putativ regulatorischen Sequenzabschnitten konnte mit Hilfe unterschiedlicher bioinformatischer Analyse-Tools durchgeführt werden. Die konservierten Sequenzbereiche der DNA zeigen im Durchschnitt eine Homologie von mehr als 65% auf. Auch die Betrachtung der Genomorganisation zeigte Gemeinsamkeiten, die sich meist nur in ihrer graduellen Ausprägung unterschieden. So weist ein knapp 80 kb großer Bereich proximal zum humanen TUB-Gen einen deutlich erhöhten AT-Gehalt auf, der ebenso im murinen Genom nur in verkürzter Version und schwächer ausgeprägt in Erscheinung tritt. Die zusätzliche Vergleichsanalyse mit einer weiteren Spezies, den orthologen Genomabschnitten von Fugu, zeigte, dass es sich bei den untersuchten Genen LMO1 und TUB um sehr konservierte und evolutiv alte Gene handelt, deren genomisches Organisationsmuster sich auch bei den paralogen Genfamilienmitglieder innerhalb derselben Spezies wiederfindet. Insgesamt konnte durch die Kartierung, Sequenzierung und Analyse eine umfassende Datenbasis für die betrachtete Genomregion und die beschriebenen Gene generiert werden, die für zukünftige Untersuchungen und Fragestellungen wertvolle Informationen bereithält.

Social inclusion of vulnerable groups through participatory and emancipatory approaches. Implementing active citizenship and socially innovative actions in the framework of civil & human rights model of disability

The research hypothesis of the thesis is that “an open participation in the co-creation of the services and environments, makes life easier for vulnerable groups”; assuming that the participatory and emancipatory approaches are processes of possible actions and changes aimed at facilitating people’s lives. The adoption of these approaches is put forward as the common denominator of social innovative practices that supporting inclusive processes allow a shift from a medical model to a civil and human rights approach to disability. The theoretical basis of this assumption finds support in many principles of Inclusive Education and the main focus of the hypothesis of research is on participation and emancipation as approaches aimed at facing emerging and existing problems related to inclusion. The framework of reference for the research is represented by the perspectives adopted by several international documents concerning policies and interventions to promote and support the leadership and participation of vulnerable groups. In the first part an in-depth analysis of the main academic publications on the central themes of the thesis has been carried out. After investigating the framework of reference, the analysis focuses on the main tools of participatory and emancipatory approaches, which are able to connect with the concepts of active citizenship and social innovation. In the second part two case studies concerning participatory and emancipatory approaches in the areas of concern are presented and analyzed as example of the improvement of inclusion, through the involvement and participation of persons with disability. The research has been developed using a holistic and interdisciplinary approach, aimed at providing a knowledge-base that fosters a shift from a situation of passivity and care towards a new scenario based on the person’s commitment in the elaboration of his/her own project of life.

Synthese und Charakterisierung von Polymethylmethacrylat (PMMA)-Silika-Komposit-Partikeln und fluorierten Nanopartikeln unter Verwendung des Miniemulsionsprozesses

In der vorliegenden Dissertation wurden zwei verschiedene Fragestellungen bearbeitet. Zum einen wurde im Rahmen des Schwerpunktprojektes „Kolloidverfahrenstechnik“ und in Zusammenarbeit mit der Arbeitsgruppe von Prof. Dr. Heike Schuchmann vom KIT in Karlsruhe die Verkapselung von Silika-Nanopartikeln in eine PMMA-Hülle durch Miniemulsionspolymerisation entwickelt und der Aufskalierungsprozess unter Verwendung von Hochdruckhomogenisatoren vorangetrieben. Zum anderen wurden verschiedene fluorierte Nanopartikel durch den Miniemulsionsprozess generiert und ihr Verhalten in Zellen untersucht.rnSilika-Partikel konnten durch Miniemulsionspolymerisation in zwei unterschiedlichen Prozessen erfolgreich verkapselt werden. Bei der ersten Methode wurden zunächst modifizierte Silika-Partikel in einer MMA-Monomerphase dispergiert und anschließend durch den normalen Miniemulsionsprozess Silika-beladene Tröpfchen generiert. Diese konnten zu Komposit-Partikeln polymerisiert werden. Bei der Verkapselung durch den Fission/Fusion Prozess wurden die hydrophobisierten Silika-Partikel durch Fission und Fusion Prozesse in schon vorhandene Monomertröpfchen eingebracht, welche hinterher polymerisiert wurden. Um hydrophiles Silika in einem hydrophoben Monomer zu dispergieren, musste zunächst eine Modifizierung der Silika-Partikel stattfinden. Dies geschah unter anderem über eine chemische Anbindung von 3-Methacryloxypropyltri-methoxysilan an der Oberfläche der Silika-Partikel. Des Weiteren wurden die hydrophilen Silika-Partikel durch Adsorption von CTMA-Cl physikalisch modifiziert. Unter anderem durch die Variation des Verkapselungsprozesses, der Silika-Menge, der Tensidart und –menge und der Comonomere konnten Komposit-Partikel mit unterschiedlichen Morphologien, Größen, und Füllgraden erhalten werden.rnFluorierte Nanopartikel wurden erfolgreich über den Prozess der Miniemulsionspolymerisation synthetisiert. Als Monomere dienten dabei fluorierte Acrylate, fluorierte Methacrylate und fluoriertes Styrol. Es war möglich aus jeder dieser drei Gruppen an Monomeren fluorierte Nanopartikel herzustellen. Für genauere Untersuchungen wurden 2,3,4,5,6-Pentafluorstyrol, 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-Heptadecafluorodecyl-methacrylat und 1H,1H,2H,2H-Perfluorodecylacrylat als Monomere ausgewählt. Als Hydrophob zur Unterdrückung der Ostwaldreifung wurde Perfluromethyldecalin eingesetzt. Die stabilsten Miniemulsionen wurden wiederum mit den ionischen Tensid SDS generiert. Mit steigendem Gehalt an SDS gelöst in der kontinuierlichen Phase, wurde eine Verkleinerung der Partikelgröße festgestellt. Neben den Homopolymerpartikeln wurden auch Copolymerpartikel mit Acrylsäure erfolgreich synthetisiert. Zudem wurde noch das Verhalten der fluorierten Partikel in Zellen überprüft. Die fluorierten Partikel wiesen ein nicht toxisches Verhalten vor. Die Adsorption von Proteinen aus Humanem Serum wurde über ITC Messungen untersucht. rnSomit konnte gezeigt werden, dass die Technik der Miniemulsionspolymerisation eine abwechslungsreiche und effektive Methode ist, um Hybridnanopartikel mit verschiedenen Morphologien und oberflächenfunktionalisierte Nanopartikel erfolgreich zu generieren.rn

Structure formation of amphiphilic molecules at the air,water interface and after film transfer

One of the basic concepts of molecular self-assembly is that the morphology of the aggregate is directly related to the structure and interaction of the aggregating molecules. This is not only true for the aggregation in bulk solution, but also for the formation of Langmuir films at the air/water interface. Thus, molecules at the interface do not necessarily form flat monomolecular films but can also aggregate into multilayers or surface micelles. In this context, various novel synthetic molecules were investigated in terms of their morphology at the air/water interface and in transferred films. rnFirst, the self-assembly of semifluorinated alkanes and their molecular orientation at the air/water interface and in transferred films was studied employing scanning force microscopy (SFM) and Kelvin potential force microscopy. Here it was found, that the investigated semifluorinated alkanes aggregate to form circular surface micelles with a diameter of 30 nm, which are constituted of smaller muffin-shaped subunits with a diameter of 10 nm. A further result is that the introduction of an aromatic core into the molecular structure leads to the formation of elongated surface micelles and thus implements a directionality to the self-assembly. rnSecond, the self-assembly of two different amphiphilic hybrid materials containing a short single stranded desoxyribonucleic acid (DNA) sequence was investigated at the air/water interface. The first molecule was a single stranded DNA (11mer) molecule with two hydrophobically modified 5-(dodec-1-ynyl)uracil nucleobases at the terminal 5'-end of the oligonucleotide sequence. Isotherm measurements revealed the formation of semi-stable films at the air/water interface. SFM imaging of films transferred via Langmuir-Blodgett technique supported this finding and indicated mono-, bi- and multilayer formation, according to the surface pressure applied upon transfer. Within these films, the hydrophilic DNA sequence was oriented towards air covering 95% of the substrate.rnSimilar results were obtained with a second type of amphiphile, a DNA block copolymer. Furthermore, the potential to perform molecular recognition experiments at the air/water interface with these DNA hybrid materials was evaluated.rnThird, polyglycerol ester molecules (PGE), which are known to form very stable foams, were studies. Aim was to elucidate the molecular structure of PGE molecules at the air/water interface in order to comprehend the foam stabilization mechanism. Several model systems mimicking the air/water interface of a PGE foam and methods for a noninvasive transfer were tested and characterized by SFM. It could be shown, that PGE stabilizes the air/water interface of a foam bubble by formation of multiple surfactant layers. Additionally, a new transfer technique, the bubble film transfer was established and characterized by high speed camera imaging.The results demonstrate the diversity of structures, which can be formed by amphiphilic molecules at the air/water interface and after film transfer, as well as the impact of the chemical structure on the aggregate morphology.

Characterization of mitochondrial genomes in bivalve species with doubly uniparental inheritance of mitochondria

Many bivalve species possess two distinct mtDNA lineages, called F and M, respectively inherited maternally and paternally: this system is called doubly uniparental inheritance (DUI). The main experimental project of my PhD was the quantification of the two mtDNAs during the development of the DUI species Ruditapes philippinarum, from early embryos to sub-adults, using Real-Time qPCR. I identified the time interval in which M mtDNA is lost from female individuals, while it is retained in males (which are heteroplasmic through all of their life cycle). The results also suggested absence of mtDNA replication during early embryogenesis, a process constituting a bottleneck that highly reduces the copy number of mtDNA molecules in cells of developing larvae. In males this bottleneck may produce cells homoplasmic for M mtDNA, and could be considered as a first step of the segregation of M in the male germ line. Another finding was the characterization, in young clams approaching the first reproductive season, of a significant boost in copy number of F mtDNA in females and of M in males. Given the age of animals in which this mtDNA-specific growth was observed, the finding could probably be the outcome of the first round of gonads and gametes production. Other lines of research included the characterization of the unassigned regions in mt genomes of DUI bivalves. These regions can harbor signals involved in the control of replication and/or transcription of the mtDNA molecule, as well as additional open reading frames (ORFs) not related to oxidative phosphorylation. These features in DUI species could be associated to the maintenance of separate inheritance routes for the two mtDNAs. Additional ORFs are also found in other animal mt genomes: I summarized the presence of gene duplications as a co-author in a review focusing on animal mt genomes with unusual gene content.

The role of dendritic cells (DC) in Friend retrovirus-induced immunosuppression and immunotherapeutic applications of functionalized nanoparticles

Friend murine leukemia Virus (FV) infection of immunocompetent mice is a well- established model to acquire further knowledge about viral immune suppression mechanisms, with the aim to develop therapeutics against retrovirus-induced diseases. Interestingly, BALB/c mice are infected by low doses of FV and die from FV-induced erythroleukemia, while C57/BL6 mice are infected by FV only at high viral dose, and remain persistently infected for their whole life. Due to the central role of dendritic cells (DC) in the induction of anti-viral responses, we asked for their functional role in the genotype-dependent sensitivity towards FV infection. In my PhD study I showed that bone marrow (BM)-derived DC differentiated from FV-infected BM cells obtained from FV-inoculated BALB/c (FV susceptible) and C57BL/6 (FV resistant) mice showed an increased endocytotic activity and lowered expression of MHCII and of costimulatory receptors as compared with non-infected control BMDC. FV-infected BMDC from either mouse strain were partially resistant towards stimulation-induced upregulation of MHCII and costimulators, and accordingly were poor T cell stimulators in vitro and in vivo. In addition, FV-infected BMDC displayed an altered expression profile of proinflammator cytokines and favoured Th2 polarization. Ongoing work is focussed on elucidating the functional role of proteins identified as differentially expressed in FV-infected DC in a genotype-dependent manner, which therefore may contribute to the differential course of FV infection in vivo in BALB/c versus C57BL/6 mice. So far, more than 300 proteins have been identified which are differently regulated in FV-infected vs. uninfected DC from both mouse strains. One of these proteins, S100A9, was strongly upregulated specifically in BMDC derived from FV-infected C57BL/6 BM cells. S100A9-/- mice were more sensitive towards inoculation with FV than corresponding wild type (WT) mice (both C57BL/6 background), which suggests a decisive role of this factor for anti-viral defense. In addition, FV-infected S100A9-/- BMDC showed lower motility than WT DC. The future work is aimed to further elucidate the functional importance of S100A9 for DC functions. To exploit the potential of DC for immunotherapeutic applications, in another project of this PhD study the usability of different types of functionalized nanoparticles

Bioanalysis of new designer drugs

Since the late 1990s the illicit drug market has undergone considerable change: along with the traditional drugs of abuse that still dominate, more than 100 psychotropic substances designed to bypass controlled substances legislation have appeared and led to intoxications and fatalities. Starting from the huge class of phenylalkylamines, containing many subgroups, the spectrum of structures has grown from tryptamines, piperazines, phenylcyclohexyl derivates and pyrrolidinophenones to synthetic cannabinoids and the first synthetic cocaine. Due to the small prevalence and high number of unknown substances, the detection of new designer drugs is a challenge for clinical and forensic toxicologists. Standard screening procedures might fail because a recently discovered or yet unknown substance has not been incorporated in the library used. Nevertheless, many metabolism studies, case reports, screening methods and substance-profiling papers concentrating on single compounds have been published. This review provides an overview of the developed bioanalytical and analytical methods, the matrices used, sample-preparation procedures, concentration of analytes in case of intoxication and also gives a résumé of immunoassay experiences. Additionally, six screening methods for biological matrices with a larger spectrum of analytes are described in more detail.

A Framework for the Automation of Discrete-Event Simulation Experiments

Simulation is an important resource for researchers in diverse fields. However, many researchers have found flaws in the methodology of published simulation studies and have described the state of the simulation community as being in a crisis of credibility. This work describes the project of the Simulation Automation Framework for Experiments (SAFE), which addresses the issues that undermine credibility by automating the workflow in the execution of simulation studies. Automation reduces the number of opportunities for users to introduce error in the scientific process thereby improvingthe credibility of the final results. Automation also eases the job of simulation users and allows them to focus on the design of models and the analysis of results rather than on the complexities of the workflow.

Significance of the Deformation History within the Hinge Zone of the Pennsylvania Salient, Appalachian Mountains

Two competing models exist for the formation of the Pennsylvania salient, a widely studied area of pronounced curvature in the Appalachian mountain belt. The viability of these models can be tested by compiling and analyzing the patterns of structures within the general hinge zone of the Pennsylvania salient. One end-member model suggests a NW-directed maximum shortening direction and no rotation through time in the culmination. An alternative model requires a two-phase development of the culmination involving NNW-directed maximum shortening overprinted by WNW-directed maximum shortening. Structural analysis at 22 locations throughout the Valley and Ridge and southern Appalachian Plateau Provinces of Pennsylvania are used to constrain orientations of the maximum shortening direction and establish whether these orientations have rotated during progressive deformation in the Pennsylvania salient's hinge. Outcrops of Paleozoic sedimentary rocks contain several orders of folds, conjugate faults, steeply dipping strike-slip faults, joints, conjugate en echelon gash vein arrays, spaced cleavage, and grain-scale finite strain indicators. This suite of structures records a complex deformation history similar to the Bear Valley sequence of progressive deformation. The available structural data from the Juniata culmination do not show a consistent temporal rotation of shortening directions and generally indicate uniform,

Central Europeans towards Integration with the European Union: A Study of Public Opinion, Social Attitudes and National Identities

Since the turbulence of 1989, the countries of Central and Eastern Europe have striven to "return to Europe". Agreements have been signed with ten post-communist countries, beginning in 1991 with Czechoslovakia (before its division), Hungary and Poland. Since that time several countries have expressed a desire to become members of the EU. In 1997 the European Commission announced its opinion on the applications for EU membership of the Czech Republic, Hungary, Poland, Slovakia, and seven other applicant countries. The Commission recommended the commencement of negotiations on accession with the Czech Republic, Estonia, Hungary, Poland, and Slovenia. Mr. Kucia's report, presented in the form of a series of manuscripts totalling 91 pages, written in English and Polish and including many pages of tables and graphs, presents the results of a study of public opinion on European integration in four countries of Central Europe (CE): the Czech Republic (CZ), Hungary (H), Poland (PL), and Slovakia (SK). The research results are primarily based on a public-opinion survey known as the Central and Eastern Eurobarometer (CEEB). CEEB has been conducted on behalf of the European Commission in the Central and Eastern European countries each year in autumn since 1990. Below is a very small selection of Mr. Kucia's research findings. Throughout the 90s people in the four countries increasingly saw their countries' future tied up with the EU, since economic and political connections to the EU were growing and prospects for EU membership were increasing. Regional co-operation within CE did not gain much popular recognition. However, initially high levels of enthusiasm for the EU were gradually superseded by a more realistic approach or even scepticism. Poland was the exception in this respect; its population was more positive about the EU in 1996 than ever before. Mr. Kucia concludes that, since the political "elites" in CE are more positive about the EU than the people they serve, they should do their best to bring people round to their beliefs, lest the project of European integration become purely the business of the elites, as Mr. Kucia claims it has been in the EU up till now. He accuses the governments of the region, the EU authorities and the media of failing to provide appropriate information, especially about the two subjects which most affect them, association with the EU and the PHARE assistance programme. Respondents were asked to rank in order the countries or regions they saw their country's future most closely tied up with. In the period 92-96 the EU received the highest ratings in all of CE. The ratings were highest in CZ in 92 and 93 (46%) and in Poland in 96 (46%). They were the lowest in Hungary (22% in 94). After the EU came "Other Western European countries (non EU)", that is Austria, Sweden and Finland (before they joined the EU in 1995), Switzerland and Norway. Mr. Kucia puts the high ratings of these countries down to historical connections and geographical proximity, particularly in the case of Austria. The USA always came second in Poland, and in Hungary too its standing has always been higher than in CZ or SK. Indeed Mr. Kucia suggests that the USA's standing is disproportionately low in especially the CZ. Germany was nominated frequently by Hungarians, though in the CZ and SK, figures have been consistently low (1-2%). "Other CE/EE countries" increased their ratings in all of CE except Poland between 92 and 96. With regard to these last figures, Mr. Kucia makes an interesting note. Assuming that for the respondents in the four countries this category covered the Visegrad 4, least support was found in Poland, whose government was the most in favour of close political co-operation within the V4, while most support was in evidence in CZ and SK, for whose governments V4 was simply not a priority. Again, there is evidence of a divide between the political elites and the people. Russia has occupied a consistently modest rank. It was the highest in PL, fairly low in H and SK and the lowest in CZ. The Slovak government's policy of closer ties with Russia is reflected in a growth in the figures from 2% in 93 to 6% in 95. Every year the spontaneous answer "we should depend on ourselves" appeared, which Mr. Kucia interprets as either a sign of isolationism and disillusionment or as a call for self-reliance. Unfortunately he regards both these tendencies as unfeasible in the uniting Europe. Moving to more general conclusions, Mr. Kucia finds that the concept "Central Europe" does not have much meaning for Central Europeans. He believes that this is probably due to the failure to establish a viable regional co-operation network. Group discussions also revealed that people thought themselves European as a consequence of being Czech or Polish etc. Thus European identity is based on national identities. Generally within the surveyed period, the numbers of those who said they often think themselves European decreased, while the numbers of those who said they never think themselves European increased from 41% in PL, 36% in CZ, and 30% in H in 1990, to 67% in CZ, 58% in PL, and 51% in H in 1995.

X-ray phase contrast imaging of metallized and non-metallized biological samples

Imaging of biological samples has been performed with a variety of techniques for example electromagnetic waves, electrons, neutrons, ultrasound and X-rays. Also conventional X-ray imaging represents the basis of medical diagnostic imaging, it remains of limited use in this application because it is based solely on the differential absorption of X-rays by tissues. Coherent and bright photon beams, such as those produced by third-generation synchrotron X-ray sources, provide further information on subtle X-ray phase changes at matter interfaces. This complements conventional X-ray absorption by edge enhancement phenomena. Thus, phase contrast imaging has the potential to improve the detection of structures on images by detecting those structures that are invisible with X-ray absorption imaging. Images of a weakly absorbing nylon fibre were recorded in in-line holography geometry using a high resolution low-noise CCD camera at the ESRF in Grenoble. The method was also applied to improve image contrast for images of biological tissues. This paper presents phase contrast microradiographs of vascular tree casts and images of a housefly. These reveal very fine structures, that remain invisible with conventional absorption contrast only.

Influence of CYP2B6 polymorphism on plasma and intracellular concentrations and toxicity of efavirenz and nevirapine in HIV-infected patients

BACKGROUND: Efavirenz (EFV) and nevirapine (NVP) are metabolized by cytochrome P450 2B6 (CYP2B6). Allele 516 G>T (Gln172His) is associated with diminished activity of this isoenzyme, and may lead to differences in drug exposure. METHODS: We evaluated this allele as a pharmacogenetic marker of EFV and NVP pharmacokinetics and EFV toxicity in 167 participants receiving EFV and 59 receiving NVP recruited within the genetics project of the Swiss HIV Cohort Study. Drug concentrations were measured in plasma and in peripheral blood mononuclear cells (PBMCs) from the same sample. Neuropsychological toxicity of EFV (sleep disorders, mood disorders, fatigue) was assessed using a standardized questionnaire. RESULTS AND CONCLUSIONS: CYP2B6 516TT was associated with greater plasma and intracellular exposure to EFV, and greater plasma exposure to NVP. Intracellular drug concentration, and CYP2B6 genotype were predictors of EFV neuropsychological toxicity. CYP2B6 genotyping may be useful to complement an individualization strategy based on plasma drug determinations to increase the safety and tolerability of EFV.

Structure of Eutectics

The present paper is a result of work done on the study of structures of eutectics of a certain eutectic-forming binary systems. In this research work no systems with intermetallic compounds have been studied.