Investigation on reproduction process in two species of crab Eriphia sebana and Ocypode saratan in the intertidal zone of Chabahar area

The present study with headline investigation on reproduction in two species of Crab Eriphia sebana and Ocypode saratan was carried out in the intertidal zone of Chabahar in thirteen month from December 2004 to December 2005. Checked samplings have been taken, 45 number Crab monthly from any four stations by manual or use trap. During this study the following subjects were measured: Temperature range and salinity, Measurable coast granule, Determination of sex ratio, Relations carapace width with carapace length, Carapace width with total body weight, Gonad weight, gonadosomatic index, condition factor, gastrosomatic index, investigation content in stomach, LM50, Growth parameters, plenty distribution length and width and gonad weight and total body weight. Studied on measurable coast granule were expressed that Ocypode saratan in Desalination station, were nest in soils equable sand and this quantity were confirmed in Pozm station. Sex ratio were assign in desalination area and Pozm M: F 0/44:0/56 and in Tiss and Chabahar M: F 0/45:0/55. Carapace length and carapace width (cm) and body weight (g) Furthest were designated in Ocypode saratan within carapace width sequential: female: 5/42-6/15-105/13 and male: 5/53-6/25-108/91 and in Eriphia sebana within Tiss area sequential: female: 5/12-5/94-110/21 and male 5/14-60/01-114/37. Have been linear relationship between carapace length and carapace width and equaled CW = a CL + b. Weight growth in two species were be modal and equaled BW= aCLb and increased Crab weight by built up carapace width. Maximum gonad weight in Ocypode saratan within desalination area in female have been outcome 3/39 and in male 0/84g and in Eriphia sebana extreme within Tiss during may in female were be 4/18 and in male 1/1g. Stomach content in Eriphia sebana were involved a black until half-purplish liquid and yellowish in Ocypode saratan. Stomach contents identifiable were being in four groups: Molluscoid, Crustacean, Plankton and Fish. Carapace width during the first year of maturation have been LM50:3/77 in Desalination area and LM50:3/92 in Pozm for Ocypode saratan and LM50:4/26 in Tiss and LM50:4/62 in Chabahar. Ability spawning in Eriphia sebana within Tiss has been CW=4/17cm and in Ocypode saratan within Desalination area CW=4/23cm. Maximun value of Loo for Eriphia sebana was equal 59/67 and growth factor K=0/68 within Tiss and Loo =61/64 , K=0/65 for Ocypode saratan within Desalination area. Maximun GSI and GI have been within Desalination area and Tiss and minimum within Pozm and Chabahar. The maturity stages of two species were classifed into six stages. Review on GSI, CF have been showed that relation with temperature and salinity and definer in two species have been spawned in two period that Maximun in spring premier than autumn.

Whistleblowing process in Finnish health care

Wrongdoing in health care is harmful action that jeopardizes patient safety and can be targeted at the patient or employees. Wrongdoing can vary from illegal, unethical or unprofessional action to inappropriate behavior in the workplace. Whistleblowing can be considered as a process where wrongdoing is suspected or oberved in health care by health care professionals and disclosed to the party that can influence the wrongful action. Whistleblowing causes severe harm to the whistleblower and to the object of whistleblowing complaint, to their personnel life and working community. The aim of this study was to analyze whistleblowing process in Finnish health care. The overall goal is to raise concern about wrongdoing and whistleblowing in Finnish health care. In this cross-sectional descriptive study the data were collected (n = 397) with probability sampling from health care professionals and members of The Union of Health and Social Care Professionals in Finland Tehy. The data were collected with questionnaire: “Whistleblowing -väärinkäytösten paljastaminen terveydenhuollossa” developed for this study and by using Webropol questionnaire -software during 26.6.-17.7.2015. The data were analyzed statistically. According to the results of this study health care professionals had suspected (67 %) and observed (66 %) wrongdoing in health care, more often than once a month (30%). Mostly were suspected (37 %) and observed (36%) inadequacy of the personnel and least violence toward the patient (3 %). Wrongdoing was whistle blown (suspected 29 %, observed 40 %) primarily inside the organization to the closest supervisor (76 %), face-to-face (88 %). Mostly the whistle was blown on nurses’ wrongdoing (58 %). Whistleblowing act didn’t end the wrongdoing (52 %) and whistleblowing had negative consequences to the whistleblower such as discrimination by the manager (35 %). Respondents with work experience less than ten years (62 %), working in temporary position (75 %) or in management position (88 %) were, more unwilling to blow the whistle. Whistleblowing should be conducted internally, to the closest manager in writing and anonymously. Wrongdoing should be dealt between the parties involved, and written warning should ensue from wrongdoing. According to the results of this study whistleblowing on wrongdoing in health care causes negative consequences to the whistleblower. In future, attention in health care should be paid to preventing wrongdoing and enhancing whistleblowing in order to decrease wrongdoing and lessen the consequences that whistleblowers face after blowing the whistle.

PROPOSTA DE MODELO DE MEDIÇÕES PARA CONTRATAÇÃO DO GERENCIAMENTO DE PROCESSO DE NEGÓCIO (BUSINESS PROCESS MANAGEMENT- BPM)

O Gerenciamento de Processo de Negócio (Business Process Management- BPM) tem sido uma prática adotada pelas organizações públicas e privadas. O BPM possibilita a identificação eficaz das necessidades e das informações necessárias para suportar a operacionalização ou a automatização do processo de negócio. Considerando que as organizações têm necessitado terceirizar esse serviço, o objetivo desse trabalho foi propor um modelo de medição para contratação dos serviços de BPM. Para atender a esse objetivo, o modelo conceitual construído partiu da premissa que a gestão da contratação de um BPM deve fornecer critérios para mensurar a demanda, ou serviço, avaliar a qualidade dos serviços prestados e a qualidade do produto recebido. O estudo adotou como instrumentos de coleta de dados a pesquisa documental e a revisão sistemática. Com base nos objetivos e questões de pesquisa foram identificados os strings para busca, definidas as fontes de busca, critérios de inclusão e exclusão dos resultados. Todos os trabalhos selecionados foram lidos e analisados e foi utilizado um mapa mental para consolidação dos resultados. Foi utilizado o GQM (Goal, Questions, Metrics) para a elaboração das medições e adotado o estudo de caso. Parte das medições propostas foram aplicadas em 13 modelos de processo de negócio do mundo real com o objetivo de verificar sua coerência e comparar os resultados. Foi realizada entrevista com especialista em modelagem de processos de negócios para avaliar os resultados obtidos e, na percepção deste especialista a maior parte das métricas propostas pela pesquisa é adequada à realidade de mercado, considerando o contexto de terceirização desse serviço.

Optimization of flocculation process and continuous filtration for sea water primary treatment filtration to reduce SDI for entree to reverse osmosis system

Today , Providing drinking water and process water is one of the major problems in most countries ; the surface water often need to be treated to achieve necessary quality, and in this way, technological and also financial difficulties cause great restrictions in operating the treatment units. Although water supply by simple and cheap systems has been one of the important objectives in most scientific and research centers in the world, still a great percent of population in developing countries, especially in rural areas, don't benefit well quality water. One of the big and available sources for providing acceptable water is sea water. There are two ways to treat sea water first evaporation and second reverse osmosis system. Nowadays R.O system has been used for desalination because of low budget price and easily to operate and maintenance. The sea water should be pretreated before R.O plants, because there is some difficulties in raw sea water that can decrease yield point of membranes in R.O system. The subject of this research may be useful in this way, and we hope to be able to achieve complete success in design and construction of useful pretreatment systems for R.O plant. One of the most important units in the sea water pretreatment plant is filtration, the conventional method for filtration is pressurized sand filters, and the subject of this research is about new filtration which is called continuous back wash sand filtration (CBWSF). The CBWSF designed and tested in this research may be used more economically with less difficulty. It consists two main parts first shell body and second central part comprising of airlift pump, raw water feeding pipe, air supply hose, backwash chamber and sand washer as well as inlet and outlet connections. The CBWSF is a continuously operating filter, i.e. the filter does not have to be taken out of operation for backwashing or cleaning. Inlet water is fed through the sand bed while the sand bed is moving downwards. The water gets filtered while the sand becomes dirty. Simultaneously, the dirty sand is cleaned in the sand washer and the suspended solids are discharged in backwash water. We analyze the behavior of CBWSF in pretreatment of sea water instead of pressurized sand filter. There is one important factor which is not suitable for R.O membranes, it is bio-fouling. This factor is defined by Silt Density Index (SDI).measured by SDI. In this research has been focused on decreasing of SDI and NTU. Based on this goal, the prototype of pretreatment had been designed and manufactured to test. The system design was done mainly by using the design fundamentals of CBWSF. The automatic backwash sand filter can be used in small and also big water supply schemes. In big water treatment plants, the units of filters perform the filtration and backwash stages separately, and in small treatment plants, the unit is usually compacted to achieve less energy consumption. The analysis of the system showed that it may be used feasibly for water treating, especially for limited population. The construction is rapid, simple and economic, and its performance is high enough because no mobile mechanical part is used in it, so it may be proposed as an effective method to improve the water quality and consequently the hygiene level in the remote places of the country.

Data Mining in Promoting Flight Safety

The incredible rapid development to huge volumes of air travel, mainly because of jet airliners that appeared to the sky in the 1950s, created the need for systematic research for aviation safety and collecting data about air traffic. The structured data can be analysed easily using queries from databases and running theseresults through graphic tools. However, in analysing narratives that often give more accurate information about the case, mining tools are needed. The analysis of textual data with computers has not been possible until data mining tools have been developed. Their use, at least among aviation, is still at a moderate level. The research aims at discovering lethal trends in the flight safety reports. The narratives of 1,200 flight safety reports from years 1994 – 1996 in Finnish were processed with three text mining tools. One of them was totally language independent, the other had a specific configuration for Finnish and the third originally created for English, but encouraging results had been achieved with Spanish and that is why a Finnish test was undertaken, too. The global rate of accidents is stabilising and the situation can now be regarded as satisfactory, but because of the growth in air traffic, the absolute number of fatal accidents per year might increase, if the flight safety will not be improved. The collection of data and reporting systems have reached their top level. The focal point in increasing the flight safety is analysis. The air traffic has generally been forecasted to grow 5 – 6 per cent annually over the next two decades. During this period, the global air travel will probably double also with relatively conservative expectations of economic growth. This development makes the airline management confront growing pressure due to increasing competition, signify cant rise in fuel prices and the need to reduce the incident rate due to expected growth in air traffic volumes. All this emphasises the urgent need for new tools and methods. All systems provided encouraging results, as well as proved challenges still to be won. Flight safety can be improved through the development and utilisation of sophisticated analysis tools and methods, like data mining, using its results supporting the decision process of the executives.

Safety assessment in primary Mycobacterium tuberculosis smear microscopy centres in Blantyre Malawi: a facility based cross sectional survey

Introduction Tuberculosis (TB) is caused by Mycobacterium tuberculosis and is transmitted mainly through aerosolization of infected sputum which puts laboratory workers at risk in spite of the laboratory workers’ risk of infection being at 3 to 9 times higher than the general public. Laboratory safety should therefore be prioritized and optimized to provide sufficient safety to laboratory workers. Objective To assess the safety for the laboratory workers in TB primary microscopy centres in Blantyre urban. Methodology TB primary microscopy centers in Blantyre urban were assessed in aspects of equipment availability, facility layout, and work practice, using a standardized WHO/AFRO ISO 15189 checklist for the developing countries which sets the minimum safety score at ≥80%. Each center was graded according to the score it earned upon assessment. Results Only one (1) microscopy center out nine (9) reached the minimum safety requirement. Four (4) centers were awarded 1 star level, four (4) centers were awarded 2 star level and only one (1) center was awarded 3 star level. Conclusion In Blantyre urban, 89% of the Tuberculosis microscopy centers are failing to provide the minimum safety to the laboratory workers. Government and other stake holders should be committed in addressing the safety challenges of TB microscopy centres in the country to ensure safety for the laboratory workers. Recommendations It is recommended that the study be conducted at the regional or national level for both public and private laboratories in order to have a general picture of safety in Tb microscopy centres possibly across the country.

Motion Planning and Controls with Safety and Temporal Constraints

Motion planning, or trajectory planning, commonly refers to a process of converting high-level task specifications into low-level control commands that can be executed on the system of interest. For different applications, the system will be different. It can be an autonomous vehicle, an Unmanned Aerial Vehicle(UAV), a humanoid robot, or an industrial robotic arm. As human machine interaction is essential in many of these systems, safety is fundamental and crucial. Many of the applications also involve performing a task in an optimal manner within a given time constraint. Therefore, in this thesis, we focus on two aspects of the motion planning problem. One is the verification and synthesis of the safe controls for autonomous ground and air vehicles in collision avoidance scenarios. The other part focuses on the high-level planning for the autonomous vehicles with the timed temporal constraints. In the first aspect of our work, we first propose a verification method to prove the safety and robustness of a path planner and the path following controls based on reachable sets. We demonstrate the method on quadrotor and automobile applications. Secondly, we propose a reachable set based collision avoidance algorithm for UAVs. Instead of the traditional approaches of collision avoidance between trajectories, we propose a collision avoidance scheme based on reachable sets and tubes. We then formulate the problem as a convex optimization problem seeking control set design for the aircraft to avoid collision. We apply our approach to collision avoidance scenarios of quadrotors and fixed-wing aircraft. In the second aspect of our work, we address the high level planning problems with timed temporal logic constraints. Firstly, we present an optimization based method for path planning of a mobile robot subject to timed temporal constraints, in a dynamic environment. Temporal logic (TL) can address very complex task specifications such as safety, coverage, motion sequencing etc. We use metric temporal logic (MTL) to encode the task specifications with timing constraints. We then translate the MTL formulae into mixed integer linear constraints and solve the associated optimization problem using a mixed integer linear program solver. We have applied our approach on several case studies in complex dynamical environments subjected to timed temporal specifications. Secondly, we also present a timed automaton based method for planning under the given timed temporal logic specifications. We use metric interval temporal logic (MITL), a member of the MTL family, to represent the task specification, and provide a constructive way to generate a timed automaton and methods to look for accepting runs on the automaton to find an optimal motion (or path) sequence for the robot to complete the task.

Environmental quality of life index incorporationg MCA & GIS : case study Lisbon Metropolitan Area, Portugal

The study of Quality of Life (Qol) has been conducted on various scales throughout the years with focus on assessing overall quality of living amongst citizens. The main focus in these studies have been on economic factors, with the purpose of creating a Quality of Life Index (QLI).When it comes down to narrowing the focus to the environment and factors like Urban Green Spaces (UGS) and air quality the topic gets more focused on pointing out how each alternative meets this certain criteria. With the benefits of UGS and a healthy environment in focus a new Environmental Quality of Life Index (EQLI) will be proposed by incorporating Multi Criteria Analysis (MCA) and Geographical Information Systems (GIS). Working with MCA on complex environmental problems and incorporating it with GIS is a challenging but rewarding task, and has proven to be an efficient approach among environmental scientists. Background information on three MCA methods will be shown: Analytical Hierarchy Process (AHP), Regime Analysis and PROMETHEE. A survey based on a previous study conducted on the status of UGS within European cities was sent to 18 municipalities in the study area. The survey consists of evaluating the current status of UGS as well as planning and management of UGS with in municipalities for the purpose of getting criteria material for the selected MCA method. The current situation of UGS is assessed with use of GIS software and change detection is done on a 10 year period using NDVI index for comparison purposes to one of the criteria in the MCA. To add to the criteria, interpolation of nitrogen dioxide levels was performed with ordinary kriging and the results transformed into indicator values. The final outcome is an EQLI map with indicators of environmentally attractive municipalities with ranking based on predefinedMCA criteria using PROMETHEE I pairwise comparison and PROMETHEE II complete ranking of alternatives. The proposed methodology is applied to Lisbon’s Metropolitan Area, Portugal.

Playgrounds: Safe designs and infrastructures for our children… an urgent matter in Costa Rica

The purpose of this article is to offer the design and infrastructure parameters necessary to have safe playgrounds since they represent a unique opportunity to foster an integral development, particularly in children.  In these public places, children learn to resolve conflicts to continue playing, having fun, and developing.  These recreational areas then become learning places that foster the formation process and provide great social, emotional, physical, cognitive, intellectual, and spiritual benefits.  However, such benefits are diminished by the lack of interest of the communities and the adult population to optimize playground conditions and by unscrupulous developers, who design playgrounds in inappropriate places putting the population at risk.  Therefore, the following must be taken seriously into consideration before, during, and after the construction of a playground: design, construction, materials, equipment, components and the procedures to meet the necessary safety requirements and the objective for which they were created, that being an area designed, equipped, and located exclusively for playing that facilitates the integral development of the population.  Consequently, it is urgent for Costa Rica to enact clear regulations that guarantee the construction, design, and use of playgrounds that do not put the population’s health at risk, prevent accidents, and guarantee the inalienable rights of each Costa Rican.

In vivo analgesic activity and safety assessment of Vitis vinifera L and Punica granatum L fruits extracts

Purpose: To investigate the analgesic properties of fruit extracts of Vitis vinifera (grape) and Punica granatum (pomegranate) in Albino mal mice. Methods: The analgesic activity of fruit extracts of V. vinifera and P. granatum were examined in vivo using thermal stimulus assays (i.e., tail immersion and hot plate) and acetic acid-induced writhing test using acetylsalicylic acid (0.1 g/kg, per os) as standard. The extracts were administered orally in doses of 1.0, 2.0 and 3.0 g/kg. Results: In acetic acid writhes test, both fruit extract pretreatments (1.0, 2.0 and 3.0 g/kg, per os) significantly decreased the number of writhes (p < 0.0001) in a dose-dependent manner compared to control. The Index of Pain Inhibition (IPI) values following V. vinifera extract treatments were 36.52 % (1.0 g/kg), 66.67 % (2.0 g/kg) and 89.71 % (3.0 g/kg) which were significantly different from those for P. granatum extracts (45.39 %, 1.0 g/kg), 70.93 %, 2.0 g/kg) and 86.88 %, 3.0 g/kg) at equivalent doses of 2.0 and 3.0 g/kg of the extracts The fruit extracts of both species increased the reaction latency time. In tail-immersion assay, only the fruit extract of P. granatum significantly increased the response to heat stimulus at doses of 2.0 g/kg (p < 0.05). Conclusion: The hydroalcohol fruit extracts of P. granatum and V. vinifera have potential analgesic effects. Further studies are needed to determine the active component responsible for this effect.

Molecular analysis of exons 8, 9 and 10 of the fibroblast growth factor receptor 2 (FGFR2) gene in two families with index cases of Apert Syndrome

Introduction: Apert syndrome (AS) is a craniosynostosis condition caused by mutations in the Fibroblast Growth Factor Receptor 2 (FGFR2) gene. Clinical features include cutaneous and osseous symmetric syndactily in hands and feet, with variable presentations in bones, brain, skin and other internal organs. Methods: Members of two families with an index case of Apert Syndrome were assessed to describe relevant clinical features and molecular analysis (sequencing and amplification) of exons 8, 9 and 10 of FGFR2 gen. Results: Family 1 consists of the mother, the index case and half -brother who has a cleft lip and palate. In this family we found a single FGFR2 mutation, S252W, in the sequence of exon 8. Although mutations were not found in the study of the patient affected with cleft lip and palate, it is known that these diseases share signaling pathways, allowing suspected alterations in shared genes. In the patient of family 2, we found a sequence variant T78.501A located near the splicing site, which could interfere in this process, and consequently with the protein function.

Localized Surface Plasmon Resonance Biosensors for Real-Time Biomolecular Binding Study

Surface Plasmon Resonance (SPR) and localized surface plasmon resonance (LSPR) biosensors have brought a revolutionary change to in vitro study of biological and biochemical processes due to its ability to measure extremely small changes in surface refractive index (RI), binding equilibrium and kinetics. Strategies based on LSPR have been employed to enhance the sensitivity for a variety of applications, such as diagnosis of diseases, environmental analysis, food safety, and chemical threat detection. In LSPR spectroscopy, absorption and scattering of light are greatly enhanced at frequencies that excite the LSPR, resulting in a characteristic extinction spectrum that depends on the RI of the surrounding medium. Compositional and conformational change within the surrounding medium near the sensing surface could therefore be detected as shifts in the extinction spectrum. This dissertation specifically focuses on the development and evaluation of highly sensitive LSPR biosensors for in situ study of biomolecular binding process by incorporating nanotechnology. Compared to traditional methods for biomolecular binding studies, LSPR-based biosensors offer real-time, label free detection. First, we modified the gold sensing surface of LSPR-based biosensors using nanomaterials such as gold nanoparticles (AuNPs) and polymer to enhance surface absorption and sensitivity. The performance of this type of biosensors was evaluated on the application of small heavy metal molecule binding affinity study. This biosensor exhibited ~7 fold sensitivity enhancement and binding kinetics measurement capability comparing to traditional biosensors. Second, a miniaturized cell culture system was integrated into the LSPR-based biosensor system for the purpose of real-time biomarker signaling pathway studies and drug efficacy studies with living cells. To the best of our knowledge, this is the first LSPR-based sensing platform with the capability of living cell studies. We demonstrated the living cell measurement ability by studying the VEGF signaling pathway in living SKOV-3 cells. Results have shown that the VEGF secretion level from SKOV-3 cells is 0.0137 ± 0.0012 pg per cell. Moreover, we have demonstrated bevacizumab drug regulation to the VEGF signaling pathway using this biosensor. This sensing platform could potentially help studying biomolecular binding kinetics which elucidates the underlying mechanisms of biotransportation and drug delivery.

Improving IT process management through value stream mapping approach: A case study

Value-Stream mapping (VSM) is a helpful tool to identify waste and improvement areas. It has emerged as a preferred way to support and implement the lean approach. While lean principles are well-established and have broad applicability in manufacturing, their extension to information technology is still limited. Based on a case study approach, this paper presents the implementation of VSM in an IT firm as a lean IT improvement initiative. It involves mapping the current activities of the firm and identifying opportunities for improvement. After several interviews with employees who are currently involved in the process, current state map is prepared to describe the existing problem areas. Future state map is prepared to show the proposed improvement action plans. The achievements of VSM implementation are reduction in lead time, cycle time and resources. Our finding indicates that, with the new process change, total lead time can be reduced from 20 days to 3 days – 92% reduction in overall lead time for database provisioning process.