Effect of Feeding Rate on Plastic Extrudates

Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties.

Impact of Gulf Money with Particular Reference to Chowghat, Trichur District,Kerala

The problems associated with emigration, inward remittances and economic development of Herala have not received ample attention. Kerala depends much on the inward remittances sent by Keralites employed abroad. It is a State that experience chronic unemployment problem. Emigration cannot provide a lasting solution to the problem of unemployment since its direction is governed mainly by the social, political and ecnonomic factors of the host countries. The present study is an attempt to focus attention on the major problems associated with emigration from Kerala. It also tries to deal with the issues involved in diverting the inward remittances to the development of the state which has some vital policy implications The problems associated with emigration, inward remittances and economic development of Herala have not received ample attention. Kerala depends much on the inward remittances sent by Keralites employed abroad. It is a State that experience chronic unemployment problem. Emigration cannot provide a lasting solution to the problem of unemployment since its direction is governed mainly by the social, political and ecnonomic factors of the host countries. The present study is an attempt to focus attention on the major problems associated with emigration from Kerala. It also tries to deal with the issues involved in diverting the inward remittances to the development of the state which has some vital policy implications Investment proepect of non~resident Keralites is the theme oi Chapter VIII. It examines the various measures taken to promote industrial development by attracting non~resident investment tc industrial ventures. Chapter IX diecusses the future of emigration from Kerale especially in the light of declining international oil prices. It also deals with the role o¥ emigration as a safety valve t: the chronic problem of unemployment in Kerala. The last Chapter presents the summary and conclusions of the study

A Study On The Utilisation Of Plastic Wastes In Stabilised Masonry Blocks

At this era of energy crisis and resource depletion, availability of conventional materials throughout the year in quantity and quality, pose a hectic problem for the builders. Adding fuel to the fire, the demand of these materials increases day by day, since the housing and habitat requirements exponentially increase time to time. There is an international concern over this crisis and researchers are reorienting themselves, so as to evolve appropriate masonry units, using locally available cheap materials and technology. The concept of green material and construction has been well conceived in the research so that marginal materials and unskilled labour can be employed for the mass production of building blocks. In this context, considering earth as a sustainable material, there is a growing interest in the use of it, as a modern construction material. Solid waste management is one of the current major environmental concerns in our country. Our country is left with millions of cubic metre of waste plastics. One of the methods to satisfactorily address this solid waste management and the environmental issues is to suitably accommodate the waste in some form (as fibres). Their employability in block making in the form of fibres (plastic fibre- mud blocks) can be investigated through a fundamental research. Also, the review of the existing literature shows that most studies on natural fibres are focussed on cellulose based/ vegetable fibres obtained from renewable plant resources except in very few cases, where animal fibre, plastic fibre and polystyrene fabric were used. At this context, for the plastic fibre-mud blocks to be more widely applicable, a systematic quantification of the relevant physical and mechanical properties of the fibre masonry units is crucial, to enable an objective evaluation of the composite material’s response to actual field condition. This research highlights the salient observations from the detailed investigation of a systematic study on the effect of embedded fibres, made of plastic wastes on the performance of stabilised mud blocks.

Waste plastic as a stabilizing additive in Stone Mastic Asphalt

The present study investigates the benefits of stabilizing the stone mastic asphalt (SMA) mixture in flexible pavement with shredded waste plastic. Conventional (without plastic) and the stabilized SMA mixtures were subjected to performance tests including Marshall Stability, tensile strength and compressive strength tests. Triaxial tests were also conducted with varying percentage bitumen by weight of mineral aggregate (6% to 8%) and by varying percentage plastic by weight of mix (6% to 12% with an increment of 1%). Plastic content of 10% by weight of bitumen is recommended for the improvement of the performance of Stone Mastic Asphalt mixtures. 10% plastic content gives an increase in the stability, split tensile strength and compressive strength of about 64%, 18% and 75% respectively compared to the conventional SMA mix. Triaxial test results show a 44% increase in cohesion and 3% decrease in angle of shearing resistance showing an increase in the shear strength. The drain down value decreases with an increase in plastic content and the value is only 0.09 % at 10% plastic content and proves to be an effective stabilizing additive in SMA mixtures

UV Embossed Plastic Chip for Protein Separation and Identification

This report demonstrates a UV-embossed polymeric chip for protein separation and identification by Capillary Isoelectric Focusing (CIEF) and Matrix Assisted Laser Desportion/Ionization Mass Spectrometry (MALDI-MS). The polymeric chip has been fabricated by UV-embossing technique with high throughput; the issues in the fabrication have been addressed. In order to achieve high sensitivity of mass detection, five different types of UV curable polymer have been used as sample support to perform protein ionization in Mass Spectrometry (MS); the best results is compared to PMMA, which was the commonly used plastic chip for biomolecular separation. Experimental results show that signal from polyester is 12 times better than that of PMMA in terms of detection sensitivity. Finally, polyester chip is utilized to carry out CIEF to separate proteins, followed by MS identification.

Identity is the new Money

Three things to think about and Three possible futures to discuss

Plan de negocios Plastic Industrial

Plastic Industrial SAS es un intraemprendimiento el cual va ligado con Americana de Accesorios ACES LTDA, siendo esta una empresa industrial familiar que lleva mas de 25 años en el mercado, centrada en el sector de autopartes, encargada de producir accesorios en plástico a través de inyectoras especializadas. El producto en el cual nos especializamos es Security Road, un producto basado en el kit de carretera ya existente en el mercado pero con ciertas características diferenciadoras que ayudaran a que las mujeres siendo tan independientes en esta época, se sientan identificadas con este producto y más allá de esto adquieran un sentido de pertenencia no solo con su vehículo y con su seguridad sino también con la de las personas que la rodean. Fabricaremos un kit de carretera el cual con características de diseño y funcionales harán de este un producto más seguro y diferente. El diseño que tiene hace que para las mujeres sea mucho más sencillo de armar.

Claude money.

Claude es un melodramático ladrón, que roba en el expreso de Overland y luego huye por los vagones del tren hasta que, literalmente, cae en manos de la policía. Con una frase por página los niños pueden contar hasta diez y utilizarlas palabras por delante, detrás, a lo largo de, a través de, alrededor, arriba, abajo, en, de, hacia, fuera, en.

If I has a lot of money... : learner errors in foreign language writing

Resumen basado en el de la publicaci??n

''Cashless'' transactions : perceptions of money in mobile payments

A limited number of ‘cashless transaction’ studies addressed the issue that the mode of payment affects perceptions of money and purchase behaviour, the majority of the research is in the area of the credit card payment mode. Credit card based research has shown that when a credit card based payment is used, the volume, value and type of products purchased increase. Whether this is due to the credit element or to the ‘cashless or mobile’ element of the transaction is not known. The notion that the tangibility of cash influences perceptions of money is not novel, but it is untested. This discussion paper suggests that under conditions of cash, there is awareness (conscious/unconscious) that a possession of value transferred and this perception may well have a direct impact on people’s perception of money and their spending behaviour.