Development of a 3500-tonne field robot

The mining industry is highly suitable for the application of robotics and automation technology, since the work is arduous, dangerous, and often repetitive. This paper presents a broad overview of the issues involved in the development of a physically large and complex field robotic system—a 3500-tonne mining machine (dragline). Draglines are “walking cranes” used in open-pit coal mining to remove the material covering a coal seam. The critical issues of robust load position sensing, modeling of the dynamics of the electrical drive system and the swinging load, control strategies, the operator interface, and automation system architecture are addressed. An important aspect of this system is that it must work cooperatively with a human operator, seamlessly passing control back and forth in order to achieve the main aim—increased productivity.

An experimental approach to air gap optimisation for a correction-less small field diode

Aim A recent Monte Carlo based study has shown that it is possible to design a diode that measures small field output factors equivalent to that in water. This is accomplished by placing an appropriate sized air gap above the silicon chip (1) with experimental results subsequently confirming that a particular Monte Carlo design was accurate (2). The aim of this work was to test if a new correction-less diode could be designed using an entirely experimental methodology. Method: All measurements were performed on a Varian iX at a depth of 5 cm, SSD of 95 cm and field sizes of 5, 6, 8, 10, 20 and 30 mm. Firstly, the experimental transfer of kq,clin,kq,msr from a commonly used diode detector (IBA, stereotactic field diode (SFD)) to another diode detector (Sun Nuclear, unshielded diode, (EDGEe)) was tested. These results were compared to Monte Carlo calculated values of the EDGEe. Secondly, the air gap above the EDGEe silicon chip was optimised empirically. Nine different air gap “tops” were placed above the EDGEe (air depth = 0.3, 0.6, 0.9 mm; air width = 3.06, 4.59, 6.13 mm). The sensitivity of the EDGEe was plotted as a function of air gap thickness for the field sizes measured. Results: The transfer of kq,clin,kq,msr from the SFD to the EDGEe was correct to within the simulation and measurement uncertainties. The EDGEe detector can be made “correction-less” for field sizes of 5 and 6 mm, but was ∼2% from being “correction-less” at field sizes of 8 and 10 mm. Conclusion Different materials will perturb small fields in different ways. A detector is only “correction-less” if all these perturbations happen to cancel out. Designing a “correction-less” diode is a complicated process, thus it is reasonable to expect that Monte Carlo simulations should play an important role.

A motor controller using field oriented control and Hall effect rotor position sensors : simulation and implementation

A field oriented control (FOC) algorithm is simulated and implemented for use with a permanent magnet synchronous motor (PMSM). Rotor position is sensed using Hall effect switches on the stator because other hardware position sensors attached to the rotor may not be desirable or cost effective for certain applications. This places a limit on the resolution of position sensing – only a few Hall effect switches can be placed. In this simulation, three sensors are used and the position information is obtained at higher resolution by estimating it from the rotor dynamics, as shown in literature previously. This study compares the performance of the method with an incremental encoder using simulations. The FOC algorithm is implemented using Digital Motor Control (DMC) and IQ Texas Instruments libraries from a Simulink toolbox called Embedded Coder, and downloaded into a TI microcontroller (TMS320F28335) known as the Piccolo via Code Composer Studio (CCS).

Transition Pedagogy Handbook : A Good Practice Guide for Policy and Practice in the First Year Experience at QUT

This Handbook has been specifically designed for academic and professional staff responsible for managing first year students and curriculum and co-curricular programs at QUT. As well as presenting examples of good practice, the handbook provides a brief overview of QUT’s First Year Experience Program, a summary of QUT’s First Year Experience and Retention Policy and the Transition Pedagogy that frames both curricular and co-curricular activities. We hope you find this resource both useful and informative.

Multiliteracies pedagogy : creating claymations with adolescent, post-beginner English language learners

In addressing literacy in high school education, it is important to foreground the particular issues faced by growing numbers of English Language Learners (ELLs). In our increasingly culturally and linguistically diverse classrooms, this is a matter for all literacy teachers, as well as ELL specialists. In Australia, teachers of ELLs are experimenting with Multiliteracies pedagogy which provides rich opportunities to explore language learning experiences and outcomes that stretch beyond exercises in reproduction in written and oral modes only. This paper documents the practice of a high school teacher who uses a claymation project, producing a movie by stop-motion filming of clay figures, with a class of low-level English literacy learners. Drawing on observations of three particular students, the paper outlines a number of possibilities of this approach for English language learners. These include increased individual agency; enhanced engagement through collaboration; and the opportunity to explore various elements of multimodal text design.

Juana Molina : left-field folktronica at the Brisbane Festival

Argentine singer-songwriter Juana Molina is one of those fearless artists. The kind of fearless artist who abandons a successful TV show at the height of its popularity to pursue a solo career in making and performing slightly left-field South American folk-tinged electronica...

Acceptability-based QoE management for user-centric mobile video delivery : a field study evaluation

Effective Quality of Experience (QoE) management for mobile video delivery – to optimize overall user experience while adapting to heterogeneous use contexts – is still a big challenge to date. This paper proposes a mobile video delivery system to emphasize the use of acceptability as the main indicator of QoE to manage the end-to-end factors in delivering mobile video services. The first contribution is a novel framework for user-centric mobile video system that is based on acceptability-based QoE (A-QoE) prediction models, which were derived from comprehensive subjective studies. The second contribution is results from a field study that evaluates the user experience of the proposed system during realistic usage circumstances, addressing the impacts of perceived video quality, loading speed, interest in content, viewing locations, network bandwidth, display devices, and different video coding approaches, including region-of-interest (ROI) enhancement and center zooming

How can partnerships between the universities and schools exploit new opportunities for pedagogies at the intersection of the arts/design and the sciences?

Driven by information accessibility-on-demand provided by the internet, education modes are changing from a teacher-led approach focused on content delivery and assessible outcomes, to a learner-based approach encouraging self-directed, peer-tutored, and cooperative learning. New pedagogies are required to extend learning beyond the classroom and traditional subject areas such as contemporary arts, in alignment with the cross disciplinary priorities of the Australian Curriculum and values of the International Baccalaureate Organisation. This research explores how partnerships with universities and cultural organisations are implicated in the generation of these new forms of pedagogy and contribute to the field of educational research within the context of Education Queensland’s Framework For Gifted Education. In particular, this paper explores a new pedagogical framework for highly capable year five to nine Queensland state school students at the intersection of arts, design and the sciences, which has arisen from an explicit secondary/ tertiary partnership between the Queensland University of Technology Creative Industries Faculty and Precincts and the Queensland Academies Young Scholars Program. The Young Scholars Program offers experiences in the International Baccalaureate and Australian Curriculum contexts to enhance outcomes via global understanding, unique industry partnerships and 21st century pedagogical innovation based not on 'content' but tacit/experiential learning concepts including immersive, creative, intellectual and social strategies. These strategies for highly capable students are centred around authentic opportunities, primary resources, transdisciplinary learning and relationships with likeminded peers including tertiary arts, design and STEM educators and students, professionals and researchers. The presentation details case studies which are hands-on real time workshops involving inquiry based challenges in the arts, design and sciences, mathematics, history, creative writing and other disciplines, with content drawn from collections from public institutions, academic research and tertiary pedagogy. Both programs implicate student collaboration and creative production as methodology/data capture for ongoing action research, in alignment with the Framework For Gifted Education’s emphasis on evidence-based practices. They also challenge gifted students “to continue their development through curricular activities that require depth of study, complexity of thinking, fast pace of learning, high-level skills development and/or creative and critical thinking (e.g. through independent investigations, tiered tasks, diverse real-world applications, mentors)”(Education Queensland, 2011:3). This presentation highlights the strengths of the ongoing collaboration between QUT Creative industries Faculty and Queensland Academies, which not only provides successful extra curricular activities for gifted students towards a place in the International Baccalaureate Program, but also provides mentoring opportunities for tertiary students in their field of endeavor to assist with their own learning, and unique research opportunities for the Faculty as it focuses on excellence in arts, design and creative education and research. Education Queensland.(2011). Framework For Gifted Education Revised Edition 2011 (accessed Nov 19 2011)

Design and experimental testing of air slab caps which convert commercial electron diodes into dual purpose, correction-free diodes for small field dosimetry

Purpose Two diodes which do not require correction factors for small field relative output measurements are designed and validated using experimental methodology. This was achieved by adding an air layer above the active volume of the diode detectors, which canceled out the increase in response of the diodes in small fields relative to standard field sizes. Methods Due to the increased density of silicon and other components within a diode, additional electrons are created. In very small fields, a very small air gap acts as an effective filter of electrons with a high angle of incidence. The aim was to design a diode that balanced these perturbations to give a response similar to a water-only geometry. Three thicknesses of air were placed at the proximal end of a PTW 60017 electron diode (PTWe) using an adjustable “air cap”. A set of output ratios (ORfclin Det ) for square field sizes of side length down to 5 mm was measured using each air thickness and compared to ORfclin Det measured using an IBA stereotactic field diode (SFD). k fclin, f msr Qclin,Qmsr was transferred from the SFD to the PTWe diode and plotted as a function of air gap thickness for each field size. This enabled the optimal air gap thickness to be obtained by observing which thickness of air was required such that k fclin, f msr Qclin,Qmsr was equal to 1.00 at all field sizes. A similar procedure was used to find the optimal air thickness required to make a modified Sun Nuclear EDGE detector (EDGEe) which s “correction-free” in small field relative dosimetry. In addition, the feasibility of experimentally transferring k fclin, f msr Qclin,Qmsr values from the SFD to unknown diodes was tested by comparing the experimentally transferred k fclin, f msr Qclin,Qmsr values for unmodified PTWe and EDGEe diodes to Monte Carlo simulated values. Results 1.0 mm of air was required to make the PTWe diode correction-free. This modified diode (PTWeair) produced output factors equivalent to those in water at all field sizes (5–50 mm). The optimal air thickness required for the EDGEe diode was found to be 0.6 mm. The modified diode (EDGEeair) produced output factors equivalent to those in water, except at field sizes of 8 and 10 mm where it measured approximately 2% greater than the relative dose to water. The experimentally calculated k fclin, f msr Qclin,Qmsr for both the PTWe and the EDGEe diodes (without air) matched Monte Carlo simulated results, thus proving that it is feasible to transfer k fclin, f msr Qclin,Qmsr from one commercially available detector to another using experimental methods and the recommended experimental setup. Conclusions It is possible to create a diode which does not require corrections for small field output factor measurements. This has been performed and verified experimentally. The ability of a detector to be “correction-free” depends strongly on its design and composition. A nonwater-equivalent detector can only be “correction-free” if competing perturbations of the beam cancel out at all field sizes. This should not be confused with true water equivalency of a detector.

Critical linguistics in the early years : exploring functions of language through sophisticated picture books and process drama strategies

In this chapter we describe a critical fairytales unit taught to 4.5 to 5.5 year olds in a context of intensifying pressure to raise literacy achievement. The unit was infused with lessons on reinterpreted fairytales followed by process drama activities built around a sophisticated picture book, Beware of the Bears (MacDonald, 2004). The latter entailed a text analytic approach to critical literacy derived from systemic functional linguistics (Halliday, 1978; Halliday & Matthiessen, 2004). This approach provides a way of analysing how words and discourse are used to represent the world in a particular way and shape reader relations with the author in a particular field (Janks, 2010).