Caracterização experimental de sistemas mecânicos com comportamento não-linear

Pós-graduação em Engenharia Mecânica - FEIS

Dinâmica não linear e controle de um sistema vibratório modelado com memória de forma e, excitado por fontes de energia do tipo ideal e não ideal

Pós-graduação em Engenharia Mecânica - FEB

Comparative degradation of ZnO- and SnO(2)-based polycrystalline non-ohmic devices by current pulse stress

The degradation behaviour of SnO(2)-based varistors (SCNCr) due to current pulses (8/20 mu s) is reported here for the first time in comparison with the ZnO-based commercial varistors (ZnO). Puncturing and/or cracking failures were observed in ZnO-based varistors possessing inferior thermo-mechanical properties in comparison with that found in a SCNCr system free of failures. Both systems presented electric degradation related to the increase in the leakage current and decrease in the electric breakdown field, non-linear coefficient and average value of the potential barrier height. However, it was found that a more severe degradation occurred in the ZnO-based varistors concerning their non-ohmic behaviour, while in the SCNCr system, a strong non-ohmic behaviour remained after the degradation. These results indicate that the degradation in the metal oxide varistors is controlled by a defect diffusion process whose rate depends on the mobility, the concentration of meta-stable defects and the amount of electrically active interfaces. The improved behaviour of the SCNCr system is then inferred to be associated with the higher amount of electrically active interfaces (85%) and to a higher energy necessary to activate the diffusion of the specific defects.

Multi-objective evolutionary algorithm for single and multiple fault service restoration in large-scale distribution systems

Network reconfiguration for service restoration (SR) in distribution systems is a complex optimization problem. For large-scale distribution systems, it is computationally hard to find adequate SR plans in real time since the problem is combinatorial and non-linear, involving several constraints and objectives. Two Multi-Objective Evolutionary Algorithms that use Node-Depth Encoding (NDE) have proved able to efficiently generate adequate SR plans for large distribution systems: (i) one of them is the hybridization of the Non-Dominated Sorting Genetic Algorithm-II (NSGA-II) with NDE, named NSGA-N; (ii) the other is a Multi-Objective Evolutionary Algorithm based on subpopulation tables that uses NDE, named MEAN. Further challenges are faced now, i.e. the design of SR plans for larger systems as good as those for relatively smaller ones and for multiple faults as good as those for one fault (single fault). In order to tackle both challenges, this paper proposes a method that results from the combination of NSGA-N, MEAN and a new heuristic. Such a heuristic focuses on the application of NDE operators to alarming network zones according to technical constraints. The method generates similar quality SR plans in distribution systems of significantly different sizes (from 3860 to 30,880 buses). Moreover, the number of switching operations required to implement the SR plans generated by the proposed method increases in a moderate way with the number of faults.

A Unitary Approach to Information and Estimation Theory in Digital Communication Systems

This thesis presents the outcomes of a Ph.D. course in telecommunications engineering. It is focused on the optimization of the physical layer of digital communication systems and it provides innovations for both multi- and single-carrier systems. For the former type we have first addressed the problem of the capacity in presence of several nuisances. Moreover, we have extended the concept of Single Frequency Network to the satellite scenario, and then we have introduced a novel concept in subcarrier data mapping, resulting in a very low PAPR of the OFDM signal. For single carrier systems we have proposed a method to optimize constellation design in presence of a strong distortion, such as the non linear distortion provided by satellites' on board high power amplifier, then we developed a method to calculate the bit/symbol error rate related to a given constellation, achieving an improved accuracy with respect to the traditional Union Bound with no additional complexity. Finally we have designed a low complexity SNR estimator, which saves one-half of multiplication with respect to the ML estimator, and it has similar estimation accuracy.

Application of reactive fluid transport modeling to hydrothermal systems

A one-dimensional multi-component reactive fluid transport algorithm, 1DREACT (Steefel, 1993) was used to investigate different fluid-rock interaction systems. A major short coming of mass transport calculations which include mineral reactions is that solid solutions occurring in many minerals are not treated adequately. Since many thermodynamic models of solid solutions are highly non-linear, this can seriously impact on the stability and efficiency of the solution algorithms used. Phase petrology community saw itself faced with a similar predicament 10 years ago. To improve performance and reliability, phase equilibrium calculations have been using pseudo compounds. The same approach is used here in the first, using the complex plagioclase solid solution as an example. Thermodynamic properties of a varying number of intermediate plagioclase phases were calculated using ideal molecular, Al-avoidance, and non-ideal mixing models. These different mixing models can easily be incorporated into the simulations without modification of the transport code. Simulation results show that as few as nine intermediate compositions are sufficient to characterize the diffusional profile between albite and anorthite. Hence this approach is very efficient, and can be used with little effort. A subsequent chapter reports the results of reactive fluid transport modeling designed to constrain the hydrothermal alteration of Paleoproterozoic sediments of the Southern Lake Superior region. Field observations reveal that quartz-pyrophyllite (or kaolinite) bearing assemblages have been transformed into muscovite-pyrophyllite-diaspore bearing assemblages due to action of fluids migrating along permeable flow channels. Fluid-rock interaction modeling with an initial qtz-prl assemblage and a K-rich fluid simulates the formation of observed mineralogical transformation. The bulk composition of the system evolves from an SiO2-rich one to an Al2O3+K2O-rich one. Simulations show that the fluid flow was up-temperature (e.g. recharge) and that fluid was K-rich. Pseudo compound approach to include solid solutions in reactive transport models was tested in modeling hydrothermal alteration of Icelandic basalts. Solid solutions of chlorites, amphiboles and plagioclase were included as the secondary mineral phases. Saline and fresh water compositions of geothermal fluids were used to investigate the effect of salinity on alteration. Fluid-rock interaction simulations produce the observed mineral transformations. They show that roughly the same alteration minerals are formed due to reactions with both types of fluid which is in agreement with the field observations. A final application is directed towards the remediation of nitrate rich groundwaters. Removal of excess nitrate from groundwater by pyrite oxidation was modeled using the reactive fluid transport algorithm. Model results show that, when a pyrite-bearing, permeable zone is placed in the flow path, nitrate concentration in infiltrating water can be significantly lowered, in agreement with proposals from the literature. This is due to nitrogen reduction. Several simulations investigate the efficiency of systems with different mineral reactive surface areas, reactive barrier zone widths, and flow rates to identify the optimum setup.

Rheology and Fourier-transform rheology on water-based systems

The influence of shear fields on water-based systems was investigated within this thesis. The non-linear rheological behaviour of spherical and rod-like particles was examined with Fourier-Transform rheology under LAOS conditions. As a model system for spherical particles two different kinds of polystyrene dispersions, with a solid content higher than 0.3 each, were synthesised within this work. Due to the differences in polydispersity and Debye-length, differences were also found in the rheology. In the FT-rheology both kinds of dispersions showed a similar rise in the intensities of the magnitudes of the odd higher harmonics, which were predicted by a model. The in some cases additionally appearing second harmonics were not predicted. A novel method to analyse the time domain signal was developed, that splits the time domain signal up in four characteristic functions. Those characteristic functions correspond to rheological phenomena. In some cases the intensities of the Fourier components can interfere negatively. FD-virus particles were used as a rod-like model system, which already shows a highly non-linear behaviour at concentrations below 1. % wt. Predictions for the dependence of the higher harmonics from the strain amplitude described the non-linear behaviour well at large, but no so good at small strain amplitudes. Additionally the trends of the rheological behaviour could be described by a theory for rod-like particles. An existing rheo-optical set-up was enhanced by reducing the background birefringence by a factor of 20 and by increasing the time resolution by a factor of 24. Additionally a combination of FT-rheology and rheo-optics was achieved. The influence of a constant shear field on the crystallisation process of zinc oxide in the presence of a polymer was examined. The crystallites showed a reduction in length by a factor of 2. The directed addition of polymers in combination with a defined shear field can be an easy way for a defined change of the form of crystallites.

Heterogeneous multicore systems for signal processing

This thesis explores the capabilities of heterogeneous multi-core systems, based on multiple Graphics Processing Units (GPUs) in a standard desktop framework. Multi-GPU accelerated desk side computers are an appealing alternative to other high performance computing (HPC) systems: being composed of commodity hardware components fabricated in large quantities, their price-performance ratio is unparalleled in the world of high performance computing. Essentially bringing “supercomputing to the masses”, this opens up new possibilities for application fields where investing in HPC resources had been considered unfeasible before. One of these is the field of bioelectrical imaging, a class of medical imaging technologies that occupy a low-cost niche next to million-dollar systems like functional Magnetic Resonance Imaging (fMRI). In the scope of this work, several computational challenges encountered in bioelectrical imaging are tackled with this new kind of computing resource, striving to help these methods approach their true potential. Specifically, the following main contributions were made: Firstly, a novel dual-GPU implementation of parallel triangular matrix inversion (TMI) is presented, addressing an crucial kernel in computation of multi-mesh head models of encephalographic (EEG) source localization. This includes not only a highly efficient implementation of the routine itself achieving excellent speedups versus an optimized CPU implementation, but also a novel GPU-friendly compressed storage scheme for triangular matrices. Secondly, a scalable multi-GPU solver for non-hermitian linear systems was implemented. It is integrated into a simulation environment for electrical impedance tomography (EIT) that requires frequent solution of complex systems with millions of unknowns, a task that this solution can perform within seconds. In terms of computational throughput, it outperforms not only an highly optimized multi-CPU reference, but related GPU-based work as well. Finally, a GPU-accelerated graphical EEG real-time source localization software was implemented. Thanks to acceleration, it can meet real-time requirements in unpreceeded anatomical detail running more complex localization algorithms. Additionally, a novel implementation to extract anatomical priors from static Magnetic Resonance (MR) scansions has been included.

Advanced signal and receiver design for next generation OFDM systems

This thesis deal with the design of advanced OFDM systems. Both waveform and receiver design have been treated. The main scope of the Thesis is to study, create, and propose, ideas and novel design solutions able to cope with the weaknesses and crucial aspects of modern OFDM systems. Starting from the the transmitter side, the problem represented by low resilience to non-linear distortion has been assessed. A novel technique that considerably reduces the Peak-to-Average Power Ratio (PAPR) yielding a quasi constant signal envelope in the time domain (PAPR close to 1 dB) has been proposed.The proposed technique, named Rotation Invariant Subcarrier Mapping (RISM),is a novel scheme for subcarriers data mapping,where the symbols belonging to the modulation alphabet are not anchored, but maintain some degrees of freedom. In other words, a bit tuple is not mapped on a single point, rather it is mapped onto a geometrical locus, which is totally or partially rotation invariant. The final positions of the transmitted complex symbols are chosen by an iterative optimization process in order to minimize the PAPR of the resulting OFDM symbol. Numerical results confirm that RISM makes OFDM usable even in severe non-linear channels. Another well known problem which has been tackled is the vulnerability to synchronization errors. Indeed in OFDM system an accurate recovery of carrier frequency and symbol timing is crucial for the proper demodulation of the received packets. In general, timing and frequency synchronization is performed in two separate phases called PRE-FFT and POST-FFT synchronization. Regarding the PRE-FFT phase, a novel joint symbol timing and carrier frequency synchronization algorithm has been presented. The proposed algorithm is characterized by a very low hardware complexity, and, at the same time, it guarantees very good performance in in both AWGN and multipath channels. Regarding the POST-FFT phase, a novel approach for both pilot structure and receiver design has been presented. In particular, a novel pilot pattern has been introduced in order to minimize the occurrence of overlaps between two pattern shifted replicas. This allows to replace conventional pilots with nulls in the frequency domain, introducing the so called Silent Pilots. As a result, the optimal receiver turns out to be very robust against severe Rayleigh fading multipath and characterized by low complexity. Performance of this approach has been analytically and numerically evaluated. Comparing the proposed approach with state of the art alternatives, in both AWGN and multipath fading channels, considerable performance improvements have been obtained. The crucial problem of channel estimation has been thoroughly investigated, with particular emphasis on the decimation of the Channel Impulse Response (CIR) through the selection of the Most Significant Samples (MSSs). In this contest our contribution is twofold, from the theoretical side, we derived lower bounds on the estimation mean-square error (MSE) performance for any MSS selection strategy,from the receiver design we proposed novel MSS selection strategies which have been shown to approach these MSE lower bounds, and outperformed the state-of-the-art alternatives. Finally, the possibility of using of Single Carrier Frequency Division Multiple Access (SC-FDMA) in the Broadband Satellite Return Channel has been assessed. Notably, SC-FDMA is able to improve the physical layer spectral efficiency with respect to single carrier systems, which have been used so far in the Return Channel Satellite (RCS) standards. However, it requires a strict synchronization and it is also sensitive to phase noise of local radio frequency oscillators. For this reason, an effective pilot tone arrangement within the SC-FDMA frame, and a novel Joint Multi-User (JMU) estimation method for the SC-FDMA, has been proposed. As shown by numerical results, the proposed scheme manages to satisfy strict synchronization requirements and to guarantee a proper demodulation of the received signal.

Quantum Correlations in Field Theory and Integrable Systems

In this thesis we will investigate some properties of one-dimensional quantum systems. From a theoretical point of view quantum models in one dimension are particularly interesting because they are strongly interacting, since particles cannot avoid each other in their motion, and you we can never ignore collisions. Yet, integrable models often generate new and non-trivial solutions, which could not be found perturbatively. In this dissertation we shall focus on two important aspects of integrable one- dimensional models: Their entanglement properties at equilibrium and their dynamical correlators after a quantum quench. The first part of the thesis will be therefore devoted to the study of the entanglement entropy in one- dimensional integrable systems, with a special focus on the XYZ spin-1/2 chain, which, in addition to being integrable, is also an interacting model. We will derive its Renyi entropies in the thermodynamic limit and its behaviour in different phases and for different values of the mass-gap will be analysed. In the second part of the thesis we will instead study the dynamics of correlators after a quantum quench , which represent a powerful tool to measure how perturbations and signals propagate through a quantum chain. The emphasis will be on the Transverse Field Ising Chain and the O(3) non-linear sigma model, which will be both studied by means of a semi-classical approach. Moreover in the last chapter we will demonstrate a general result about the dynamics of correlation functions of local observables after a quantum quench in integrable systems. In particular we will show that if there are not long-range interactions in the final Hamiltonian, then the dynamics of the model (non equal- time correlations) is described by the same statistical ensemble that describes its statical properties (equal-time correlations).

Numerical studies of colloidal systems

The interplay of hydrodynamic and electrostatic forces is of great importance for the understanding of colloidal dispersions. Theoretical descriptions are often based on the so called standard electrokinetic model. This Mean Field approach combines the Stokes equation for the hydrodynamic flow field, the Poisson equation for electrostatics and a continuity equation describing the evolution of the ion concentration fields. In the first part of this thesis a new lattice method is presented in order to efficiently solve the set of non-linear equations for a charge-stabilized colloidal dispersion in the presence of an external electric field. Within this framework, the research is mainly focused on the calculation of the electrophoretic mobility. Since this transport coefficient is independent of the electric field only for small driving, the algorithm is based upon a linearization of the governing equations. The zeroth order is the well known Poisson-Boltzmann theory and the first order is a coupled set of linear equations. Furthermore, this set of equations is divided into several subproblems. A specialized solver for each subproblem is developed, and various tests and applications are discussed for every particular method. Finally, all solvers are combined in an iterative procedure and applied to several interesting questions, for example, the effect of the screening mechanism on the electrophoretic mobility or the charge dependence of the field-induced dipole moment and ion clouds surrounding a weakly charged sphere. In the second part a quantitative data analysis method is developed for a new experimental approach, known as "Total Internal Reflection Fluorescence Cross-Correlation Spectroscopy" (TIR-FCCS). The TIR-FCCS setup is an optical method using fluorescent colloidal particles to analyze the flow field close to a solid-fluid interface. The interpretation of the experimental results requires a theoretical model, which is usually the solution of a convection-diffusion equation. Since an analytic solution is not available due to the form of the flow field and the boundary conditions, an alternative numerical approach is presented. It is based on stochastic methods, i. e. a combination of a Brownian Dynamics algorithm and Monte Carlo techniques. Finally, experimental measurements for a hydrophilic surface are analyzed using this new numerical approach.

Computer simulations of slowly relaxing systems in external fields

Eine der offenen Fragen der aktuellen Physik ist das Verständnis von Systemen im Nichtgleichgewicht. Im Gegensatz zu der Gleichgewichtsphysik ist in diesem Bereich aktuell kein Formalismus bekannt der ein systematisches Beschreiben der unterschiedlichen Systeme ermöglicht. Um das Verständnis über diese Systeme zu vergrößern werden in dieser Arbeit zwei unterschiedliche Systeme studiert, die unter einem externen Feld ein starkes nichtlineares Verhalten zeigen. Hierbei handelt es sich zum einen um das Verhalten von Teilchen unter dem Einfluss einer extern angelegten Kraft und zum anderen um das Verhalten eines Systems in der Nähe des kritischen Punktes unter Scherung. Das Modellsystem in dem ersten Teil der Arbeit ist eine binäre Yukawa Mischung, die bei tiefen Temperaturen einen Glassübergang zeigt. Dies führt zu einer stark ansteigenden Relaxationszeit des Systems, so dass man auch bei kleinen Kräften relativ schnell ein nichtlineares Verhalten beobachtet. In Abhängigkeit der angelegten konstanten Kraft können in dieser Arbeit drei Regime, mit stark unterschiedlichem Teilchenverhalten, identifiziert werden. In dem zweiten Teil der Arbeit wird das Ising-Modell unter Scherung betrachtet. In der Nähe des kritischen Punkts kommt es in diesem Modell zu einer Beeinflussung der Fluktuationen in dem System durch das angelegte Scherfeld. Dies hat zur Folge, dass das System stark anisotrop wird und man zwei unterschiedliche Korrelationslängen vorfindet, die mit unterschiedlichen Exponenten divergieren. Infolgedessen lässt sich der normale isotrope Formalismus des "finite-size scaling" nicht mehr auf dieses System anwenden. In dieser Arbeit wird gezeigt, wie dieser auf den anisotropen Fall zu verallgemeinern ist und wie damit die kritischen Punkte, sowie die dazu gehörenden kritischen Exponenten berechnet werden können.

Dynamic analysis of road vehicle-bridge systems under turbulent wind by means of Finite Element Models

When an automobile passes over a bridge dynamic effects are produced in vehicle and structure. In addition, the bridge itself moves when exposed to the wind inducing dynamic effects on the vehicle that have to be considered. The main objective of this work is to understand the influence of the different parameters concerning the vehicle, the bridge, the road roughness or the wind in the comfort and safety of the vehicles when crossing bridges. Non linear finite element models are used for structures and multibody dynamic models are employed for vehicles. The interaction between the vehicle and the bridge is considered by contact methods. Road roughness is described by the power spectral density (PSD) proposed by the ISO 8608. To consider that the profiles under right and left wheels are different but not independent, the hypotheses of homogeneity and isotropy are assumed. To generate the wind velocity history along the road the Sandia method is employed. The global problem is solved by means of the finite element method. First the methodology for modelling the interaction is verified in a benchmark. Following, the case of a vehicle running along a rigid road and subjected to the action of the turbulent wind is analyzed and the road roughness is incorporated in a following step. Finally the flexibility of the bridge is added to the model by making the vehicle run over the structure. The application of this methodology will allow to understand the influence of the different parameters in the comfort and safety of road vehicles crossing wind exposed bridges. Those results will help to recommend measures to make the traffic over bridges more reliable without affecting the structural integrity of the viaduct

Conceptual framework for the design, implementation and validation of psychomotor skills’ assessment systems in minimally invasive surgery

Las técnicas de cirugía de mínima invasión (CMI) se están consolidando hoy en día como alternativa a la cirugía tradicional, debido a sus numerosos beneficios para los pacientes. Este cambio de paradigma implica que los cirujanos deben aprender una serie de habilidades distintas de aquellas requeridas en cirugía abierta. El entrenamiento y evaluación de estas habilidades se ha convertido en una de las mayores preocupaciones en los programas de formación de cirujanos, debido en gran parte a la presión de una sociedad que exige cirujanos bien preparados y una reducción en el número de errores médicos. Por tanto, se está prestando especial atención a la definición de nuevos programas que permitan el entrenamiento y la evaluación de las habilidades psicomotoras en entornos seguros antes de que los nuevos cirujanos puedan operar sobre pacientes reales. Para tal fin, hospitales y centros de formación están gradualmente incorporando instalaciones de entrenamiento donde los residentes puedan practicar y aprender sin riesgos. Es cada vez más común que estos laboratorios dispongan de simuladores virtuales o simuladores físicos capaces de registrar los movimientos del instrumental de cada residente. Estos simuladores ofrecen una gran variedad de tareas de entrenamiento y evaluación, así como la posibilidad de obtener información objetiva de los ejercicios. Los diferentes estudios de validación llevados a cabo dan muestra de su utilidad; pese a todo, los niveles de evidencia presentados son en muchas ocasiones insuficientes. Lo que es más importante, no existe un consenso claro a la hora de definir qué métricas son más útiles para caracterizar la pericia quirúrgica. El objetivo de esta tesis doctoral es diseñar y validar un marco de trabajo conceptual para la definición y validación de entornos para la evaluación de habilidades en CMI, en base a un modelo en tres fases: pedagógica (tareas y métricas a emplear), tecnológica (tecnologías de adquisición de métricas) y analítica (interpretación de la competencia en base a las métricas). Para tal fin, se describe la implementación práctica de un entorno basado en (1) un sistema de seguimiento de instrumental fundamentado en el análisis del vídeo laparoscópico; y (2) la determinación de la pericia en base a métricas de movimiento del instrumental. Para la fase pedagógica se diseñó e implementó un conjunto de tareas para la evaluación de habilidades psicomotoras básicas, así como una serie de métricas de movimiento. La validación de construcción llevada a cabo sobre ellas mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. Adicionalmente, los resultados obtenidos en la validación de apariencia fueron en general positivos en todos los grupos considerados (noveles, residentes, expertos). Para la fase tecnológica, se introdujo el EVA Tracking System, una solución para el seguimiento del instrumental quirúrgico basado en el análisis del vídeo endoscópico. La precisión del sistema se evaluó a 16,33ppRMS para el seguimiento 2D de la herramienta en la imagen; y a 13mmRMS para el seguimiento espacial de la misma. La validación de construcción con una de las tareas de evaluación mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. La validación concurrente con el TrEndo® Tracking System por su parte presentó valores altos de correlación para 8 de las 9 métricas analizadas. Finalmente, para la fase analítica se comparó el comportamiento de tres clasificadores supervisados a la hora de determinar automáticamente la pericia quirúrgica en base a la información de movimiento del instrumental, basados en aproximaciones lineales (análisis lineal discriminante, LDA), no lineales (máquinas de soporte vectorial, SVM) y difusas (sistemas adaptativos de inferencia neurodifusa, ANFIS). Los resultados muestran que en media SVM presenta un comportamiento ligeramente superior: 78,2% frente a los 71% y 71,7% obtenidos por ANFIS y LDA respectivamente. Sin embargo las diferencias estadísticas medidas entre los tres no fueron demostradas significativas. En general, esta tesis doctoral corrobora las hipótesis de investigación postuladas relativas a la definición de sistemas de evaluación de habilidades para cirugía de mínima invasión, a la utilidad del análisis de vídeo como fuente de información y a la importancia de la información de movimiento de instrumental a la hora de caracterizar la pericia quirúrgica. Basándose en estos cimientos, se han de abrir nuevos campos de investigación que contribuyan a la definición de programas de formación estructurados y objetivos, que puedan garantizar la acreditación de cirujanos sobradamente preparados y promocionen la seguridad del paciente en el quirófano. Abstract Minimally invasive surgery (MIS) techniques have become a standard in many surgical sub-specialties, due to their many benefits for patients. However, this shift in paradigm implies that surgeons must acquire a complete different set of skills than those normally attributed to open surgery. Training and assessment of these skills has become a major concern in surgical learning programmes, especially considering the social demand for better-prepared professionals and for the decrease of medical errors. Therefore, much effort is being put in the definition of structured MIS learning programmes, where practice with real patients in the operating room (OR) can be delayed until the resident can attest for a minimum level of psychomotor competence. To this end, skills’ laboratory settings are being introduced in hospitals and training centres where residents may practice and be assessed on their psychomotor skills. Technological advances in the field of tracking technologies and virtual reality (VR) have enabled the creation of new learning systems such as VR simulators or enhanced box trainers. These systems offer a wide range of tasks, as well as the capability of registering objective data on the trainees’ performance. Validation studies give proof of their usefulness; however, levels of evidence reported are in many cases low. More importantly, there is still no clear consensus on topics such as the optimal metrics that must be used to assess competence, the validity of VR simulation, the portability of tracking technologies into real surgeries (for advanced assessment) or the degree to which the skills measured and obtained in laboratory environments transfer to the OR. The purpose of this PhD is to design and validate a conceptual framework for the definition and validation of MIS assessment environments based on a three-pillared model defining three main stages: pedagogical (tasks and metrics to employ), technological (metric acquisition technologies) and analytical (interpretation of competence based on metrics). To this end, a practical implementation of the framework is presented, focused on (1) a video-based tracking system and (2) the determination of surgical competence based on the laparoscopic instruments’ motionrelated data. The pedagogical stage’s results led to the design and implementation of a set of basic tasks for MIS psychomotor skills’ assessment, as well as the definition of motion analysis parameters (MAPs) to measure performance on said tasks. Validation yielded good construct results for parameters such as time, path length, depth, average speed, average acceleration, economy of area and economy of volume. Additionally, face validation results showed positive acceptance on behalf of the experts, residents and novices. For the technological stage the EVA Tracking System is introduced. EVA provides a solution for tracking laparoscopic instruments from the analysis of the monoscopic video image. Accuracy tests for the system are presented, which yielded an average RMSE of 16.33pp for 2D tracking of the instrument on the image and of 13mm for 3D spatial tracking. A validation experiment was conducted using one of the tasks and the most relevant MAPs. Construct validation showed significant differences for time, path length, depth, average speed, average acceleration, economy of area and economy of volume; especially between novices and residents/experts. More importantly, concurrent validation with the TrEndo® Tracking System presented high correlation values (>0.7) for 8 of the 9 MAPs proposed. Finally, the analytical stage allowed comparing the performance of three different supervised classification strategies in the determination of surgical competence based on motion-related information. The three classifiers were based on linear (linear discriminant analysis, LDA), non-linear (support vector machines, SVM) and fuzzy (adaptive neuro fuzzy inference systems, ANFIS) approaches. Results for SVM show slightly better performance than the other two classifiers: on average, accuracy for LDA, SVM and ANFIS was of 71.7%, 78.2% and 71% respectively. However, when confronted, no statistical significance was found between any of the three. Overall, this PhD corroborates the investigated research hypotheses regarding the definition of MIS assessment systems, the use of endoscopic video analysis as the main source of information and the relevance of motion analysis in the determination of surgical competence. New research fields in the training and assessment of MIS surgeons can be proposed based on these foundations, in order to contribute to the definition of structured and objective learning programmes that guarantee the accreditation of well-prepared professionals and the promotion of patient safety in the OR.

Side-Channel Attack Protection Techniques in FPGA Systems using Enhanced Dual-Rail Solutions

Esta tesis doctoral se centra principalmente en técnicas de ataque y contramedidas relacionadas con ataques de canal lateral (SCA por sus siglas en inglés), que han sido propuestas dentro del campo de investigación académica desde hace 17 años. Las investigaciones relacionadas han experimentado un notable crecimiento en las últimas décadas, mientras que los diseños enfocados en la protección sólida y eficaz contra dichos ataques aún se mantienen como un tema de investigación abierto, en el que se necesitan iniciativas más confiables para la protección de la información persona de empresa y de datos nacionales. El primer uso documentado de codificación secreta se remonta a alrededor de 1700 B.C., cuando los jeroglíficos del antiguo Egipto eran descritos en las inscripciones. La seguridad de la información siempre ha supuesto un factor clave en la transmisión de datos relacionados con inteligencia diplomática o militar. Debido a la evolución rápida de las técnicas modernas de comunicación, soluciones de cifrado se incorporaron por primera vez para garantizar la seguridad, integridad y confidencialidad de los contextos de transmisión a través de cables sin seguridad o medios inalámbricos. Debido a las restricciones de potencia de cálculo antes de la era del ordenador, la técnica de cifrado simple era un método más que suficiente para ocultar la información. Sin embargo, algunas vulnerabilidades algorítmicas pueden ser explotadas para restaurar la regla de codificación sin mucho esfuerzo. Esto ha motivado nuevas investigaciones en el área de la criptografía, con el fin de proteger el sistema de información ante sofisticados algoritmos. Con la invención de los ordenadores se ha acelerado en gran medida la implementación de criptografía segura, que ofrece resistencia eficiente encaminada a obtener mayores capacidades de computación altamente reforzadas. Igualmente, sofisticados cripto-análisis han impulsado las tecnologías de computación. Hoy en día, el mundo de la información ha estado involucrado con el campo de la criptografía, enfocada a proteger cualquier campo a través de diversas soluciones de cifrado. Estos enfoques se han fortalecido debido a la unificación optimizada de teorías matemáticas modernas y prácticas eficaces de hardware, siendo posible su implementación en varias plataformas (microprocesador, ASIC, FPGA, etc.). Las necesidades y requisitos de seguridad en la industria son las principales métricas de conducción en el diseño electrónico, con el objetivo de promover la fabricación de productos de gran alcance sin sacrificar la seguridad de los clientes. Sin embargo, una vulnerabilidad en la implementación práctica encontrada por el Prof. Paul Kocher, et al en 1996 implica que un circuito digital es inherentemente vulnerable a un ataque no convencional, lo cual fue nombrado posteriormente como ataque de canal lateral, debido a su fuente de análisis. Sin embargo, algunas críticas sobre los algoritmos criptográficos teóricamente seguros surgieron casi inmediatamente después de este descubrimiento. En este sentido, los circuitos digitales consisten típicamente en un gran número de celdas lógicas fundamentales (como MOS - Metal Oxide Semiconductor), construido sobre un sustrato de silicio durante la fabricación. La lógica de los circuitos se realiza en función de las innumerables conmutaciones de estas células. Este mecanismo provoca inevitablemente cierta emanación física especial que puede ser medida y correlacionada con el comportamiento interno del circuito. SCA se puede utilizar para revelar datos confidenciales (por ejemplo, la criptografía de claves), analizar la arquitectura lógica, el tiempo e incluso inyectar fallos malintencionados a los circuitos que se implementan en sistemas embebidos, como FPGAs, ASICs, o tarjetas inteligentes. Mediante el uso de la comparación de correlación entre la cantidad de fuga estimada y las fugas medidas de forma real, información confidencial puede ser reconstruida en mucho menos tiempo y computación. Para ser precisos, SCA básicamente cubre una amplia gama de tipos de ataques, como los análisis de consumo de energía y radiación ElectroMagnética (EM). Ambos se basan en análisis estadístico y, por lo tanto, requieren numerosas muestras. Los algoritmos de cifrado no están intrínsecamente preparados para ser resistentes ante SCA. Es por ello que se hace necesario durante la implementación de circuitos integrar medidas que permitan camuflar las fugas a través de "canales laterales". Las medidas contra SCA están evolucionando junto con el desarrollo de nuevas técnicas de ataque, así como la continua mejora de los dispositivos electrónicos. Las características físicas requieren contramedidas sobre la capa física, que generalmente se pueden clasificar en soluciones intrínsecas y extrínsecas. Contramedidas extrínsecas se ejecutan para confundir la fuente de ataque mediante la integración de ruido o mala alineación de la actividad interna. Comparativamente, las contramedidas intrínsecas están integradas en el propio algoritmo, para modificar la aplicación con el fin de minimizar las fugas medibles, o incluso hacer que dichas fugas no puedan ser medibles. Ocultación y Enmascaramiento son dos técnicas típicas incluidas en esta categoría. Concretamente, el enmascaramiento se aplica a nivel algorítmico, para alterar los datos intermedios sensibles con una máscara de manera reversible. A diferencia del enmascaramiento lineal, las operaciones no lineales que ampliamente existen en criptografías modernas son difíciles de enmascarar. Dicho método de ocultación, que ha sido verificado como una solución efectiva, comprende principalmente la codificación en doble carril, que está ideado especialmente para aplanar o eliminar la fuga dependiente de dato en potencia o en EM. En esta tesis doctoral, además de la descripción de las metodologías de ataque, se han dedicado grandes esfuerzos sobre la estructura del prototipo de la lógica propuesta, con el fin de realizar investigaciones enfocadas a la seguridad sobre contramedidas de arquitectura a nivel lógico. Una característica de SCA reside en el formato de las fuentes de fugas. Un típico ataque de canal lateral se refiere al análisis basado en la potencia, donde la capacidad fundamental del transistor MOS y otras capacidades parásitas son las fuentes esenciales de fugas. Por lo tanto, una lógica robusta resistente a SCA debe eliminar o mitigar las fugas de estas micro-unidades, como las puertas lógicas básicas, los puertos I/O y las rutas. Las herramientas EDA proporcionadas por los vendedores manipulan la lógica desde un nivel más alto, en lugar de realizarlo desde el nivel de puerta, donde las fugas de canal lateral se manifiestan. Por lo tanto, las implementaciones clásicas apenas satisfacen estas necesidades e inevitablemente atrofian el prototipo. Por todo ello, la implementación de un esquema de diseño personalizado y flexible ha de ser tomado en cuenta. En esta tesis se presenta el diseño y la implementación de una lógica innovadora para contrarrestar SCA, en la que se abordan 3 aspectos fundamentales: I. Se basa en ocultar la estrategia sobre el circuito en doble carril a nivel de puerta para obtener dinámicamente el equilibrio de las fugas en las capas inferiores; II. Esta lógica explota las características de la arquitectura de las FPGAs, para reducir al mínimo el gasto de recursos en la implementación; III. Se apoya en un conjunto de herramientas asistentes personalizadas, incorporadas al flujo genérico de diseño sobre FPGAs, con el fin de manipular los circuitos de forma automática. El kit de herramientas de diseño automático es compatible con la lógica de doble carril propuesta, para facilitar la aplicación práctica sobre la familia de FPGA del fabricante Xilinx. En este sentido, la metodología y las herramientas son flexibles para ser extendido a una amplia gama de aplicaciones en las que se desean obtener restricciones mucho más rígidas y sofisticadas a nivel de puerta o rutado. En esta tesis se realiza un gran esfuerzo para facilitar el proceso de implementación y reparación de lógica de doble carril genérica. La viabilidad de las soluciones propuestas es validada mediante la selección de algoritmos criptográficos ampliamente utilizados, y su evaluación exhaustiva en comparación con soluciones anteriores. Todas las propuestas están respaldadas eficazmente a través de ataques experimentales con el fin de validar las ventajas de seguridad del sistema. El presente trabajo de investigación tiene la intención de cerrar la brecha entre las barreras de implementación y la aplicación efectiva de lógica de doble carril. En esencia, a lo largo de esta tesis se describirá un conjunto de herramientas de implementación para FPGAs que se han desarrollado para trabajar junto con el flujo de diseño genérico de las mismas, con el fin de lograr crear de forma innovadora la lógica de doble carril. Un nuevo enfoque en el ámbito de la seguridad en el cifrado se propone para obtener personalización, automatización y flexibilidad en el prototipo de circuito de bajo nivel con granularidad fina. Las principales contribuciones del presente trabajo de investigación se resumen brevemente a continuación: Lógica de Precharge Absorbed-DPL logic: El uso de la conversión de netlist para reservar LUTs libres para ejecutar la señal de precharge y Ex en una lógica DPL. Posicionamiento entrelazado Row-crossed con pares idénticos de rutado en redes de doble carril, lo que ayuda a aumentar la resistencia frente a la medición EM selectiva y mitigar los impactos de las variaciones de proceso. Ejecución personalizada y herramientas de conversión automática para la generación de redes idénticas para la lógica de doble carril propuesta. (a) Para detectar y reparar conflictos en las conexiones; (b) Detectar y reparar las rutas asimétricas. (c) Para ser utilizado en otras lógicas donde se requiere un control estricto de las interconexiones en aplicaciones basadas en Xilinx. Plataforma CPA de pruebas personalizadas para el análisis de EM y potencia, incluyendo la construcción de dicha plataforma, el método de medición y análisis de los ataques. Análisis de tiempos para cuantificar los niveles de seguridad. División de Seguridad en la conversión parcial de un sistema de cifrado complejo para reducir los costes de la protección. Prueba de concepto de un sistema de calefacción auto-adaptativo para mitigar los impactos eléctricos debido a la variación del proceso de silicio de manera dinámica. La presente tesis doctoral se encuentra organizada tal y como se detalla a continuación: En el capítulo 1 se abordan los fundamentos de los ataques de canal lateral, que abarca desde conceptos básicos de teoría de modelos de análisis, además de la implementación de la plataforma y la ejecución de los ataques. En el capítulo 2 se incluyen las estrategias de resistencia SCA contra los ataques de potencia diferencial y de EM. Además de ello, en este capítulo se propone una lógica en doble carril compacta y segura como contribución de gran relevancia, así como también se presentará la transformación lógica basada en un diseño a nivel de puerta. Por otra parte, en el Capítulo 3 se abordan los desafíos relacionados con la implementación de lógica en doble carril genérica. Así mismo, se describirá un flujo de diseño personalizado para resolver los problemas de aplicación junto con una herramienta de desarrollo automático de aplicaciones propuesta, para mitigar las barreras de diseño y facilitar los procesos. En el capítulo 4 se describe de forma detallada la elaboración e implementación de las herramientas propuestas. Por otra parte, la verificación y validaciones de seguridad de la lógica propuesta, así como un sofisticado experimento de verificación de la seguridad del rutado, se describen en el capítulo 5. Por último, un resumen de las conclusiones de la tesis y las perspectivas como líneas futuras se incluyen en el capítulo 6. Con el fin de profundizar en el contenido de la tesis doctoral, cada capítulo se describe de forma más detallada a continuación: En el capítulo 1 se introduce plataforma de implementación hardware además las teorías básicas de ataque de canal lateral, y contiene principalmente: (a) La arquitectura genérica y las características de la FPGA a utilizar, en particular la Xilinx Virtex-5; (b) El algoritmo de cifrado seleccionado (un módulo comercial Advanced Encryption Standard (AES)); (c) Los elementos esenciales de los métodos de canal lateral, que permiten revelar las fugas de disipación correlacionadas con los comportamientos internos; y el método para recuperar esta relación entre las fluctuaciones físicas en los rastros de canal lateral y los datos internos procesados; (d) Las configuraciones de las plataformas de pruebas de potencia / EM abarcadas dentro de la presente tesis. El contenido de esta tesis se amplia y profundiza a partir del capítulo 2, en el cual se abordan varios aspectos claves. En primer lugar, el principio de protección de la compensación dinámica de la lógica genérica de precarga de doble carril (Dual-rail Precharge Logic-DPL) se explica mediante la descripción de los elementos compensados a nivel de puerta. En segundo lugar, la lógica PA-DPL es propuesta como aportación original, detallando el protocolo de la lógica y un caso de aplicación. En tercer lugar, dos flujos de diseño personalizados se muestran para realizar la conversión de doble carril. Junto con ello, se aclaran las definiciones técnicas relacionadas con la manipulación por encima de la netlist a nivel de LUT. Finalmente, una breve discusión sobre el proceso global se aborda en la parte final del capítulo. El Capítulo 3 estudia los principales retos durante la implementación de DPLs en FPGAs. El nivel de seguridad de las soluciones de resistencia a SCA encontradas en el estado del arte se ha degenerado debido a las barreras de implantación a través de herramientas EDA convencionales. En el escenario de la arquitectura FPGA estudiada, se discuten los problemas de los formatos de doble carril, impactos parásitos, sesgo tecnológico y la viabilidad de implementación. De acuerdo con estas elaboraciones, se plantean dos problemas: Cómo implementar la lógica propuesta sin penalizar los niveles de seguridad, y cómo manipular un gran número de celdas y automatizar el proceso. El PA-DPL propuesto en el capítulo 2 se valida con una serie de iniciativas, desde características estructurales como doble carril entrelazado o redes de rutado clonadas, hasta los métodos de aplicación tales como las herramientas de personalización y automatización de EDA. Por otra parte, un sistema de calefacción auto-adaptativo es representado y aplicado a una lógica de doble núcleo, con el fin de ajustar alternativamente la temperatura local para equilibrar los impactos negativos de la variación del proceso durante la operación en tiempo real. El capítulo 4 se centra en los detalles de la implementación del kit de herramientas. Desarrollado sobre una API third-party, el kit de herramientas personalizado es capaz de manipular los elementos de la lógica de circuito post P&R ncd (una versión binaria ilegible del xdl) convertido al formato XDL Xilinx. El mecanismo y razón de ser del conjunto de instrumentos propuestos son cuidadosamente descritos, que cubre la detección de enrutamiento y los enfoques para la reparación. El conjunto de herramientas desarrollado tiene como objetivo lograr redes de enrutamiento estrictamente idénticos para la lógica de doble carril, tanto para posicionamiento separado como para el entrelazado. Este capítulo particularmente especifica las bases técnicas para apoyar las implementaciones en los dispositivos de Xilinx y su flexibilidad para ser utilizado sobre otras aplicaciones. El capítulo 5 se enfoca en la aplicación de los casos de estudio para la validación de los grados de seguridad de la lógica propuesta. Se discuten los problemas técnicos detallados durante la ejecución y algunas nuevas técnicas de implementación. (a) Se discute el impacto en el proceso de posicionamiento de la lógica utilizando el kit de herramientas propuesto. Diferentes esquemas de implementación, tomando en cuenta la optimización global en seguridad y coste, se verifican con los experimentos con el fin de encontrar los planes de posicionamiento y reparación optimizados; (b) las validaciones de seguridad se realizan con los métodos de correlación y análisis de tiempo; (c) Una táctica asintótica se aplica a un núcleo AES sobre BCDL estructurado para validar de forma sofisticada el impacto de enrutamiento sobre métricas de seguridad; (d) Los resultados preliminares utilizando el sistema de calefacción auto-adaptativa sobre la variación del proceso son mostrados; (e) Se introduce una aplicación práctica de las herramientas para un diseño de cifrado completa. Capítulo 6 incluye el resumen general del trabajo presentado dentro de esta tesis doctoral. Por último, una breve perspectiva del trabajo futuro se expone, lo que puede ampliar el potencial de utilización de las contribuciones de esta tesis a un alcance más allá de los dominios de la criptografía en FPGAs. ABSTRACT This PhD thesis mainly concentrates on countermeasure techniques related to the Side Channel Attack (SCA), which has been put forward to academic exploitations since 17 years ago. The related research has seen a remarkable growth in the past decades, while the design of solid and efficient protection still curiously remain as an open research topic where more reliable initiatives are required for personal information privacy, enterprise and national data protections. The earliest documented usage of secret code can be traced back to around 1700 B.C., when the hieroglyphs in ancient Egypt are scribed in inscriptions. Information security always gained serious attention from diplomatic or military intelligence transmission. Due to the rapid evolvement of modern communication technique, crypto solution was first incorporated by electronic signal to ensure the confidentiality, integrity, availability, authenticity and non-repudiation of the transmitted contexts over unsecure cable or wireless channels. Restricted to the computation power before computer era, simple encryption tricks were practically sufficient to conceal information. However, algorithmic vulnerabilities can be excavated to restore the encoding rules with affordable efforts. This fact motivated the development of modern cryptography, aiming at guarding information system by complex and advanced algorithms. The appearance of computers has greatly pushed forward the invention of robust cryptographies, which efficiently offers resistance relying on highly strengthened computing capabilities. Likewise, advanced cryptanalysis has greatly driven the computing technologies in turn. Nowadays, the information world has been involved into a crypto world, protecting any fields by pervasive crypto solutions. These approaches are strong because of the optimized mergence between modern mathematical theories and effective hardware practices, being capable of implement crypto theories into various platforms (microprocessor, ASIC, FPGA, etc). Security needs from industries are actually the major driving metrics in electronic design, aiming at promoting the construction of systems with high performance without sacrificing security. Yet a vulnerability in practical implementation found by Prof. Paul Kocher, et al in 1996 implies that modern digital circuits are inherently vulnerable to an unconventional attack approach, which was named as side-channel attack since then from its analysis source. Critical suspicions to theoretically sound modern crypto algorithms surfaced almost immediately after this discovery. To be specifically, digital circuits typically consist of a great number of essential logic elements (as MOS - Metal Oxide Semiconductor), built upon a silicon substrate during the fabrication. Circuit logic is realized relying on the countless switch actions of these cells. This mechanism inevitably results in featured physical emanation that can be properly measured and correlated with internal circuit behaviors. SCAs can be used to reveal the confidential data (e.g. crypto-key), analyze the logic architecture, timing and even inject malicious faults to the circuits that are implemented in hardware system, like FPGA, ASIC, smart Card. Using various comparison solutions between the predicted leakage quantity and the measured leakage, secrets can be reconstructed at much less expense of time and computation. To be precisely, SCA basically encloses a wide range of attack types, typically as the analyses of power consumption or electromagnetic (EM) radiation. Both of them rely on statistical analyses, and hence require a number of samples. The crypto algorithms are not intrinsically fortified with SCA-resistance. Because of the severity, much attention has to be taken into the implementation so as to assemble countermeasures to camouflage the leakages via "side channels". Countermeasures against SCA are evolving along with the development of attack techniques. The physical characteristics requires countermeasures over physical layer, which can be generally classified into intrinsic and extrinsic vectors. Extrinsic countermeasures are executed to confuse the attacker by integrating noise, misalignment to the intra activities. Comparatively, intrinsic countermeasures are built into the algorithm itself, to modify the implementation for minimizing the measurable leakage, or making them not sensitive any more. Hiding and Masking are two typical techniques in this category. Concretely, masking applies to the algorithmic level, to alter the sensitive intermediate values with a mask in reversible ways. Unlike the linear masking, non-linear operations that widely exist in modern cryptographies are difficult to be masked. Approved to be an effective counter solution, hiding method mainly mentions dual-rail logic, which is specially devised for flattening or removing the data-dependent leakage in power or EM signatures. In this thesis, apart from the context describing the attack methodologies, efforts have also been dedicated to logic prototype, to mount extensive security investigations to countermeasures on logic-level. A characteristic of SCA resides on the format of leak sources. Typical side-channel attack concerns the power based analysis, where the fundamental capacitance from MOS transistors and other parasitic capacitances are the essential leak sources. Hence, a robust SCA-resistant logic must eliminate or mitigate the leakages from these micro units, such as basic logic gates, I/O ports and routings. The vendor provided EDA tools manipulate the logic from a higher behavioral-level, rather than the lower gate-level where side-channel leakage is generated. So, the classical implementations barely satisfy these needs and inevitably stunt the prototype. In this case, a customized and flexible design scheme is appealing to be devised. This thesis profiles an innovative logic style to counter SCA, which mainly addresses three major aspects: I. The proposed logic is based on the hiding strategy over gate-level dual-rail style to dynamically overbalance side-channel leakage from lower circuit layer; II. This logic exploits architectural features of modern FPGAs, to minimize the implementation expenses; III. It is supported by a set of assistant custom tools, incorporated by the generic FPGA design flow, to have circuit manipulations in an automatic manner. The automatic design toolkit supports the proposed dual-rail logic, facilitating the practical implementation on Xilinx FPGA families. While the methodologies and the tools are flexible to be expanded to a wide range of applications where rigid and sophisticated gate- or routing- constraints are desired. In this thesis a great effort is done to streamline the implementation workflow of generic dual-rail logic. The feasibility of the proposed solutions is validated by selected and widely used crypto algorithm, for thorough and fair evaluation w.r.t. prior solutions. All the proposals are effectively verified by security experiments. The presented research work attempts to solve the implementation troubles. The essence that will be formalized along this thesis is that a customized execution toolkit for modern FPGA systems is developed to work together with the generic FPGA design flow for creating innovative dual-rail logic. A method in crypto security area is constructed to obtain customization, automation and flexibility in low-level circuit prototype with fine-granularity in intractable routings. Main contributions of the presented work are summarized next: Precharge Absorbed-DPL logic: Using the netlist conversion to reserve free LUT inputs to execute the Precharge and Ex signal in a dual-rail logic style. A row-crossed interleaved placement method with identical routing pairs in dual-rail networks, which helps to increase the resistance against selective EM measurement and mitigate the impacts from process variations. Customized execution and automatic transformation tools for producing identical networks for the proposed dual-rail logic. (a) To detect and repair the conflict nets; (b) To detect and repair the asymmetric nets. (c) To be used in other logics where strict network control is required in Xilinx scenario. Customized correlation analysis testbed for EM and power attacks, including the platform construction, measurement method and attack analysis. A timing analysis based method for quantifying the security grades. A methodology of security partitions of complex crypto systems for reducing the protection cost. A proof-of-concept self-adaptive heating system to mitigate electrical impacts over process variations in dynamic dual-rail compensation manner. The thesis chapters are organized as follows: Chapter 1 discusses the side-channel attack fundamentals, which covers from theoretic basics to analysis models, and further to platform setup and attack execution. Chapter 2 centers to SCA-resistant strategies against generic power and EM attacks. In this chapter, a major contribution, a compact and secure dual-rail logic style, will be originally proposed. The logic transformation based on bottom-layer design will be presented. Chapter 3 is scheduled to elaborate the implementation challenges of generic dual-rail styles. A customized design flow to solve the implementation problems will be described along with a self-developed automatic implementation toolkit, for mitigating the design barriers and facilitating the processes. Chapter 4 will originally elaborate the tool specifics and construction details. The implementation case studies and security validations for the proposed logic style, as well as a sophisticated routing verification experiment, will be described in Chapter 5. Finally, a summary of thesis conclusions and perspectives for future work are included in Chapter 5. To better exhibit the thesis contents, each chapter is further described next: Chapter 1 provides the introduction of hardware implementation testbed and side-channel attack fundamentals, and mainly contains: (a) The FPGA generic architecture and device features, particularly of Virtex-5 FPGA; (b) The selected crypto algorithm - a commercially and extensively used Advanced Encryption Standard (AES) module - is detailed; (c) The essentials of Side-Channel methods are profiled. It reveals the correlated dissipation leakage to the internal behaviors, and the method to recover this relationship between the physical fluctuations in side-channel traces and the intra processed data; (d) The setups of the power/EM testing platforms enclosed inside the thesis work are given. The content of this thesis is expanded and deepened from chapter 2, which is divided into several aspects. First, the protection principle of dynamic compensation of the generic dual-rail precharge logic is explained by describing the compensated gate-level elements. Second, the novel DPL is originally proposed by detailing the logic protocol and an implementation case study. Third, a couple of custom workflows are shown next for realizing the rail conversion. Meanwhile, the technical definitions that are about to be manipulated above LUT-level netlist are clarified. A brief discussion about the batched process is given in the final part. Chapter 3 studies the implementation challenges of DPLs in FPGAs. The security level of state-of-the-art SCA-resistant solutions are decreased due to the implementation barriers using conventional EDA tools. In the studied FPGA scenario, problems are discussed from dual-rail format, parasitic impact, technological bias and implementation feasibility. According to these elaborations, two problems arise: How to implement the proposed logic without crippling the security level; and How to manipulate a large number of cells and automate the transformation. The proposed PA-DPL in chapter 2 is legalized with a series of initiatives, from structures to implementation methods. Furthermore, a self-adaptive heating system is depicted and implemented to a dual-core logic, assumed to alternatively adjust local temperature for balancing the negative impacts from silicon technological biases on real-time. Chapter 4 centers to the toolkit system. Built upon a third-party Application Program Interface (API) library, the customized toolkit is able to manipulate the logic elements from post P&R circuit (an unreadable binary version of the xdl one) converted to Xilinx xdl format. The mechanism and rationale of the proposed toolkit are carefully convoyed, covering the routing detection and repairing approaches. The developed toolkit aims to achieve very strictly identical routing networks for dual-rail logic both for separate and interleaved placement. This chapter particularly specifies the technical essentials to support the implementations in Xilinx devices and the flexibility to be expanded to other applications. Chapter 5 focuses on the implementation of the case studies for validating the security grades of the proposed logic style from the proposed toolkit. Comprehensive implementation techniques are discussed. (a) The placement impacts using the proposed toolkit are discussed. Different execution schemes, considering the global optimization in security and cost, are verified with experiments so as to find the optimized placement and repair schemes; (b) Security validations are realized with correlation, timing methods; (c) A systematic method is applied to a BCDL structured module to validate the routing impact over security metric; (d) The preliminary results using the self-adaptive heating system over process variation is given; (e) A practical implementation of the proposed toolkit to a large design is introduced. Chapter 6 includes the general summary of the complete work presented inside this thesis. Finally, a brief perspective for the future work is drawn which might expand the potential utilization of the thesis contributions to a wider range of implementation domains beyond cryptography on FPGAs.