Theoretical and experimental study of novel hybrid composite and metal-composites interfaces

The growing demand for lightweight solutions in every field of engineering is driving the industry to seek new technological solutions to exploit the full potential of different materials. The combination of dissimilar materials with distinct property ranges embodies a transparent allocation of component functions while allowing an optimal mix of their characteristics. From both technological and design perspectives, the interaction between dissimilar materials can lead to severe defects that compromise a multi-material hybrid component's performance and its structural integrity. This thesis aims to develop methodologies for designing, manufacturing, and monitoring of hybrid metal-composite joints and hybrid composite components. In Chapter 1, a methodology for designing and manufacturing hybrid aluminum/composite co-cured tubes is assessed. In Chapter 2, a full-field methodology for fiber misalignment detection and stiffness prediction for hybrid, long fiber reinforced composite systems is shown and demonstrated. Chapter 3 reports the development of a novel technology for joining short fiber systems and metals in a one-step co-curing process using lattice structures. Chapter 4 is dedicated to a novel analytical framework for the design optimization of two lattice architectures.

Investigation of organic semiconductor/water interfaces for optobioelectronic devices

The thesis investigates the potential of photoactive organic semiconductors as a new class of materials for developing bioelectronic devices that can convert light into biological signals. The materials can be either small molecules or polymers. When these materials interact with aqueous biological fluids, they give rise to various electrochemical phenomena, including photofaradaic or photocapacitive processes, depending on whether photogenerated charges participate in redox processes or accumulate at an interface. The thesis starts by studying the behavior of the H2Pc/PTCDI molecular p/n thin-film heterojunction in contact with aqueous electrolyte. An equivalent circuit model is developed, explaining the measurements and predicting behavior in wireless mode. A systematic study on p-type polymeric thin-films is presented, comparing rr-P3HT with two low bandgap conjugated polymers: PBDB-T and PTB7. The results demonstrate that PTB7 has superior photocurrent performance due to more effective electron-transfer onto acceptor states in solution. Furthermore, the thesis addresses the issue of photovoltage generation for wireless photoelectrodes. An analytical model based on photoactivated charge-transfer across the organic-semiconductor/water interface is developed, explaining the large photovoltages observed for polymeric p-type semiconductor electrodes in water. Then, flash-precipitated nanoparticles made of the same three photoactive polymers are investigated, assessing the influence of fabrication parameters on the stability, structure, and energetics of the nanoparticles. Photocathodic current generation and consequent positive charge accumulation is also investigated. Additionally, newly developed porous P3HT thin-films are tested, showing that porosity increases both the photocurrent and the semiconductor/water interfacial capacity. Finally, the thesis demonstrates the biocompatibility of the materials in in-vitro experiments and shows safe levels of photoinduced intracellular ROS production with p-type polymeric thin-films and nanoparticles. The findings highlight the potential of photoactive organic semiconductors in the development of optobioelectronic devices, demonstrating their ability to convert light into biological signals and interface with biological fluids.

Nanomechanical characterization of soft bioelectronic interfaces via modeling-informed atomic force microscopy

The field of bioelectronics involves the use of electrodes to exchange electrical signals with biological systems for diagnostic and therapeutic purposes in biomedical devices and healthcare applications. However, the mechanical compatibility of implantable devices with the human body has been a challenge, particularly with long-term implantation into target organs. Current rigid bioelectronics can trigger inflammatory responses and cause unstable device functions due to the mechanical mismatch with the surrounding soft tissue. Recent advances in flexible and stretchable electronics have shown promise in making bioelectronic interfaces more biocompatible. To fully achieve this goal, material science and engineering of soft electronic devices must be combined with quantitative characterization and modeling tools to understand the mechanical issues at the interface between electronic technology and biological tissue. Local mechanical characterization is crucial to understand the activation of failure mechanisms and optimizing the devices. Experimental techniques for testing mechanical properties at the nanoscale are emerging, and the Atomic Force Microscope (AFM) is a good candidate for in situ local mechanical characterization of soft bioelectronic interfaces. In this work, in situ experimental techniques with solely AFM supported by interpretive models for the characterization of planar and three-dimensional devices suitable for in vivo and in vitro biomedical experimentations are reported. The combination of the proposed models and experimental techniques provides access to the local mechanical properties of soft bioelectronic interfaces. The study investigates the nanomechanics of hard thin gold films on soft polymeric substrates (Poly(dimethylsiloxane) PDMS) and 3D inkjet-printed micropillars under different deformation states. The proposed characterization methods provide a rapid and precise determination of mechanical properties, thus giving the possibility to parametrize the microfabrication steps and investigate their impact on the final device.

Considerations on indirect adhesive restorations at the material and tooth interfaces

Objective: Lithium-silicate (LiSi) ceramic is nowadays widely used in dentistry. However, for the longevity of LiSi indirect restorations, it is important to pretreat the material and the dental substrate adequately. However, is not certain how the simplification of the manufacturing and conditioning procedures influences the bonding performances of LiSi ceramic restorations. Accordingly, the aims of this thesis were to investigate the effect of: 1) different LiSi ceramic surface decontamination procedures on the shear bond strength (SBS) to resin composite; 2) different types of lithium-disilicate (LiDi) (pressed vs CAD-CAM) on SBS to resin composite; 3) an experimental metal salt-based zirconium oxynitrate etchant [ZrO(NO3)2] on bonding performances to dentin. Materials and Methods: SBS test was used to investigate the influence of different cleaning protocols applied, or different processing techniques (CAD or PRESS) on the bond strength to composite resin. The third study tackled the interface between restorative materials and dentin, and investigated the microtensile bond strength test (µTBS), nanoleakage expression analysis (NL), gelatin zymography and in situ zymography of dentin conditioned with an experimental metal salt-based zirconium oxynitrate etchant [ZrO(NO3)2]. Results: MEP showed comparable bond strength to the double HP etching and higher compared to other groups. BS of press LiSi to composite was higher than that of CAD/CAM LiSi. ZON pretreatment increased bond strength to dentin when used with a universal adhesive, and inhibited dentinal endogenous enzymes. Conclusions: While simplification of the LiSi conditioning and cleaning procedures seems to yield bond strength comparable to the traditional procedures, it could be recommended in the clinical practice. However, pressed LiSi still seems to perform better in terms of bond strength compared to the CAD/CAM LiSi. Further, the novel ZON etchant seems to perform better compared to the traditional phosphoric dentin etching.

Interfaces between national and EU law: time limits in cross-border civil proceedings and their impact on the free circulation of judgments

The thesis aims at exploring possible legal solutions to remove the obstacles to the free circulation of judgments in the civil justice area that arise from the remarkably diverging national rules on procedural time limits. As shown by the case-law of the CJEU, time limits have recently come under closer scrutiny. The interplay between national and EU law illustrates that time limits raise significant deficiencies connected with the right to a fair trial under Art. 6 ECHR and Art. 47 CFR – e.g. the effective recovery of claims, effective judicial protection, effective cross-border enforcement of judgments – which negatively impact EU cross-border civil litigation. In order to overcome some of the weaknesses of the current legal framework governing the cross-border enforcement of judgments and strengthen the parties’ fundamental procedural rights the PhD thesis intends to determine whether and, to what extent time limits can be harmonised at EU level. EU action on time limits would indeed favour the speed, efficiency and proportionality of cross-border proceedings without sacrificing the fairness of the judicial process and the equality of the parties

Graphene-based bioelectronic interfaces and devices and interpretative models targeting glial cells

Bioelectronic interfaces have significantly advanced in recent years, offering potential treatments for vision impairments, spinal cord injuries, and neurodegenerative diseases. However, the classical neurocentric vision drives the technological development toward neurons. Emerging evidence highlights the critical role of glial cells in the nervous system. Among them, astrocytes significantly influence neuronal networks throughout life and are implicated in several neuropathological states. Although they are incapable to fire action potentials, astrocytes communicate through diverse calcium (Ca2+) signalling pathways, crucial for cognitive functions and brain blood flow regulation. Current bioelectronic devices are primarily designed to interface neurons and are unsuitable for studying astrocytes. Graphene, with its unique electrical, mechanical and biocompatibility properties, has emerged as a promising neural interface material. However, its use as electrode interface to modulate astrocyte functionality remains unexplored. The aim of this PhD work was to exploit Graphene-oxide (GO) and reduced GO (rGO)-coated electrodes to control Ca2+ signalling in astrocytes by electrical stimulation. We discovered that distinct Ca2+dynamics in astrocytes can be evoked, in vitro and in brain slices, depending on the conductive/insulating properties of rGO/GO electrodes. Stimulation by rGO electrodes induces intracellular Ca2+ response with sharp peaks of oscillations (“P-type”), exclusively due to Ca2+ release from intracellular stores. Conversely, astrocytes stimulated by GO electrodes show slower and sustained Ca2+ response (“S-type”), largely mediated by external Ca2+ influx through specific ion channels. Astrocytes respond faster than neurons and activate distinct G-Protein Coupled Receptor intracellular signalling pathways. We propose a resistive/insulating model, hypothesizing that the different conductivity of the substrate influences the electric field at the cell/electrolyte or cell/material interfaces, favouring, respectively, the Ca2+ release from intracellular stores or the extracellular Ca2+ influx. This research provides a simple tool to selectively control distinct Ca2+ signals in brain astrocytes in neuroscience and bioelectronic medicine.

As redes de atenção em saúde: interfaces entre o saber e agir na Atenção Primária de Saúde

O Município de Diamantina está localizado no nordeste de Minas Gerais e possui 47.647 habitantes. É microrregional de saúde e referência para o Vale do Jequitinhonha. No município há 84% da área de cobertura da população pela Atenção Primária de Saúde (APS). A Estratégia Saúde da Família Vila Operária (ESF-VO) é composta por uma equipe multiprofissional que atende a uma população adstrita de 3.885 pessoas. Neste existem as Redes de Atenção à Saúde (RAS): VivaVida, HIPERDIA e Urgência/Emergência. As RAS são organizações que atuam em conjunto com os serviços de saúde, vinculadas entre si, por uma missão única, por objetivos comuns e por uma ação cooperativa possibilitando ofertar uma atenção continua e integral. Este trabalho objetivou divulgar a RAS e fomentá-la como uma estratégia de saúde na prática do fazer saúde na APS. A fundamentação teórica se deu por pesquisa bibliográfica com os descritores: atenção à saúde, sistemas de saúde, educação em saúde nos sites de estudos e pesquisas científicas: SciELO, BIREME, nos Cadernos de Atenção Básica, site e links do Ministério da Saúde, bem como de relatos de experiência na ESF em estudo. A expectativa é de que o entendimento do funcionamento das RAS e formação de equipe-rede seja o diferencial para APS e que este Plano de Intervenção gere uma mudança na realização do atendimento, mas principalmente na resolutividades das ações práticas de saúde. A operacionalização dos grupos conforme a técnica de Grupos Operativos de Pichón-Rivière permitirá a fixação e reprodução do método às comunidades e descentralização do saber.

Instrumentos de vigilância da tuberculose e suas interfaces com a atenção à PVHA

Unidade 3, atividade 4, do curso Organização de serviços para o atendimento de pessoas coinfectadas por TB-HIV. A infectologista Rossana Coimbra Brito fala sobre o acolhimento em serviços de saúde que atendem pessoas coinfectadas por TB e HIV. Aborda os instrumentos de vigilância do Programa Nacional de Controle de Tuberculose e suas interfaces na atenção de pessoas vivendo com HIV/AIDS nos sistemas de atendimento especializados. Os instrumentos são a ficha de notificação, o boletim de acompanhamento e livro de registro e acompanhamento de tratamento dos casos de tuberculose dos serviços de saúde. Através desses são baseadas as decisões do controle da tuberculose no País e a delimitação de populações mais vulneráveis à TB/HIV. Apresenta o também Sistema de Informação de Tratamentos Especiais de Tuberculose (SITETB) e explica sua importância e funcionamento no controle da doença.

Instrumentos de vigilância da tuberculose e suas interfaces com a atenção à PVHA

Transcrição da aula da Unidade 3, atividade 4, do curso Organização de serviços para o atendimento de pessoas coinfectadas por TB-HIV. A infectologista Rossana Coimbra Brito fala sobre o acolhimento em serviços de saúde que atendem pessoas coinfectadas por TB e HIV. Aborda os instrumentos de vigilância do Programa Nacional de Controle de Tuberculose e suas interfaces na atenção de pessoas vivendo com HIV/AIDS nos sistemas de atendimento especializados. Os instrumentos são a ficha de notificação, o boletim de acompanhamento e livro de registro e acompanhamento de tratamento dos casos de tuberculose dos serviços de saúde. Através desses são baseadas as decisões do controle da tuberculose no País e a delimitação de populações mais vulneráveis à TB/HIV. Apresenta o também Sistema de Informação de Tratamentos Especiais de Tuberculose (SITETB) e explica sua importância e funcionamento no controle da doença.

Instrumentos de vigilância da tuberculose e suas interfaces com a atenção à PVHA

Unidade 3, atividade 4, do curso Organização de serviços para o atendimento de pessoas coinfectadas por TB-HIV. A infectologista Rossana Coimbra Brito fala sobre o acolhimento em serviços de saúde que atendem pessoas coinfectadas por TB e HIV. Aborda os instrumentos de vigilância do Programa Nacional de Controle de Tuberculose e suas interfaces na atenção de pessoas vivendo com HIV/AIDS nos sistemas de atendimento especializados. Os instrumentos são a ficha de notificação, o boletim de acompanhamento e livro de registro e acompanhamento de tratamento dos casos de tuberculose dos serviços de saúde. Através desses são baseadas as decisões do controle da tuberculose no País e a delimitação de populações mais vulneráveis à TB/HIV. Apresenta o também Sistema de Informação de Tratamentos Especiais de Tuberculose (SITETB) e explica sua importância e funcionamento no controle da doença.

Self-etch Adhesive Systems: A Literature Review.

This paper presents the state of the art of self-etch adhesive systems. Four topics are shown in this review and included: the historic of this category of bonding agents, bonding mechanism, characteristics/properties and the formation of acid-base resistant zone at enamel/dentin-adhesive interfaces. Also, advantages regarding etch-and-rinse systems and classifications of self-etch adhesive systems according to the number of steps and acidity are addressed. Finally, issues like the potential durability and clinical importance are discussed. Self-etch adhesive systems are promising materials because they are easy to use, bond chemically to tooth structure and maintain the dentin hydroxyapatite, which is important for the durability of the bonding.

Estudo por espectroscopia micro-Raman dos mecanismos de separação de fase em vidros fosfatos de metais de transição

Glass-ceramics are prepared by controlled separation of crystal phases in glasses, leading to uniform and dense grain structures. On the other hand, chemical leaching of soluble crystal phases yields porous glass-ceramics with important applications. Here, glass/ceramic interfaces of niobo-, vanado- and titano-phosphate glasses were studied by micro-Raman spectroscopy, whose spatial resolution revealed the multiphase structures. Phase-separation mechanisms were also determined by this technique, revealing that interface composition remained unchanged as the crystallization front advanced for niobo- and vanadophosphate glasses (interface-controlled crystallization). For titanophosphate glasses, phase composition changed continuously with time up to the equilibrium composition, indicating a spinodal-type phase separation.

Equipamento microprocessado para geração de sinal de correção diferencial, em tempo real, para GPS

This work presents the development of low cost microprocessor-based equipment for generation of differential GPS correction signal, in real time, and configuration and supervision of the GPS base. The developed equipment contains a dedicated microcontroller connected to the GPS receiver, alphanumeric display and multifunction keyboard for configuration and operation of the system and communication interfaces. The electronic circuit has the function of receiving the information from GPS base; interpret them, converting the sentence in the RTCM SC-104 protocol. The microcontroller software makes the conversion of the signal received by the GPS base from the specific format to RTCM SC-104 protocol. The processing main board has two serials RS-232C standard interfaces. One of them is used for configuration and receiving the information generated by the GPS base. The other operates as output, sending the differential correction signal for the transmission system. The development of microprocessor-based equipment showed that it is possible the construction of a low cost private station for real time generation of differential GPS correction signal.

Mulheres indigenas: poder e tradição

This study contemplates reports and reflections about gender and the interfaces with work, power and woman's political participation within the Bororo indigenous communities in Mato Grosso, Guarani/Kaiowá and Kadiwéu ones, in Mato Grosso do Sul. In the study with the Bororo community, the woman valorization occurred because she represents the guardian of the culture and of the traditional knowledge, and at the same time, she is an important speaker for the Bororo and the non indigenous society. In the case of Guarani/Kaiowá community, the most important facts are, on one side, the departure of the men and their wish to become city men, and on the other, the women who wish or need to keep the Guarani identity and live in the reserve. In the Kadiwéu community, the most important fact is the women political power and a role division between men and women, without the attribution of more value to one role or the other.

Metamorfose planar via métodos Level Set e Particle Level Set para a reconstrução de superfícies tridimensionais

Evolving interfaces were initially focused on solutions to scientific problems in Fluid Dynamics. With the advent of the more robust modeling provided by Level Set method, their original boundaries of applicability were extended. Specifically to the Geometric Modeling area, works published until then, relating Level Set to tridimensional surface reconstruction, centered themselves on reconstruction from a data cloud dispersed in space; the approach based on parallel planar slices transversal to the object to be reconstructed is still incipient. Based on this fact, the present work proposes to analyse the feasibility of Level Set to tridimensional reconstruction, offering a methodology that simultaneously integrates the proved efficient ideas already published about such approximation and the proposals to process the inherent limitations of the method not satisfactorily treated yet, in particular the excessive smoothing of fine characteristics of contours evolving under Level Set. In relation to this, the application of the variant Particle Level Set is suggested as a solution, for its intrinsic proved capability to preserve mass of dynamic fronts. At the end, synthetic and real data sets are used to evaluate the presented tridimensional surface reconstruction methodology qualitatively.