Stromal myofibroblasts in squamous cell carcinoma of the tongue in young patients - a multicenter collaborative study

Objective. The purpose of this study was to evaluate the presence of myofibroblasts, frequently associated with a more aggressive neoplastic behavior, in oral tongue squamous cell carcinoma (TSCC) of young patients and to compare with the distribution observed in older patients.Study Design. Tumor samples from 29 patients younger than 40 years old affected by TSCC were retrieved and investigated for the presence of stromal myofibroblasts by immunohistochemical reactions against a smooth muscle actin, and the results obtained were compared to TSCC cases affecting older patients.Results. No positive reaction could be found in the stromal areas devoid of neoplastic tissue, whereas myofibroblasts were present in 58.6% of the lesions in young patients and in 75.9% of the older ones. No significant difference was found when comparing the invasive front and the overall stroma of both groups, and no correlation could be obtained with stromal a smooth muscle actin expression, higher tumor grades or clinical stage (P > .05).Conclusion. There was no significant difference between the presence of stromal myofibroblasts of TSCC affecting young and old individuals.

Spin-dependent beating patterns in thermoelectric properties: Filtering the carriers of the heat flux in a Kondo adatom system

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Collaborative language learning in Teletandem: a resource for pre-service teacher education

This article presents some of the results of a qualitative research project about the influences of the pedagogic strategies used by a mediator (graduate student in applied linguistics) in the supervision process of a Teletandem partner (undergraduate student in languages) on her pedagogical practice. It was done within the project Teletandem Brazil: foreign language for all. Based on the reflective teaching paradigm and collaborative language learning, with special emphasis on tandem learning, we analyzed the contributions of the collaborative relationship established between the graduate student and the student-teacher in her first teaching experience. The results bring about implications for the field of language teacher education in a perspective of education within practice, evidencing the experience of collaborative learning in teletandem as an opportunity for reflective teacher education of pre-service teachers.

Building Leadership: The Knowledge of Principals in Creating Collaborative Communities of Professional Learning

Research literature is replete with the importance of collaboration in schools, the lack of its implementation, the centrality of the role of the principal, and the existence of a gap between knowledge and practice--or a "Knowing-Doing Gap." In other words, there is a set of knowledge that principals must know in order to create a collaborative workplace environment for teachers. This study sought to describe what high school principals know about creating such a culture of collaboration. The researcher combed journal articles, studies and professional literature in order to identify what principals must know in order to create a culture of collaboration. The result was ten elements of principal knowledge: Staff involvement in important decisions, Charismatic leadership not being necessary for success, Effective elements of teacher teams, Administrator‘s modeling professional learning, The allocation of resources, Staff meetings focused on student learning, Elements of continuous improvement, and Principles of Adult Learning, Student Learning and Change. From these ten elements, the researcher developed a web-based survey intended to measure nine of those elements (Charismatic leadership was excluded). Principals of accredited high schools in the state of Nebraska were invited to participate in this survey, as high schools are well-known for the isolation that teachers experience--particularly as a result of departmentalization. The results indicate that principals have knowledge of eight of the nine measured elements. The one that they lacked an understanding of was Principles of Student Learning. Given these two findings of what principals do and do not know, the researcher recommends that professional organizations, intermediate service agencies and district-level support staff engage in systematic and systemic initiatives to increase the knowledge of principals in the element of lacking knowledge. Further, given that eight of the nine elements are understood by principals, it would be wise to examine reasons for the implementation gap (Knowing-Doing Gap) and how to overcome it.

Two extensions for the ALWABP: Parallel stations and collaborative approach

In this article, we introduce two new variants of the Assembly Line Worker Assignment and Balancing Problem (ALWABP) that allow parallelization of and collaboration between heterogeneous workers. These new approaches suppose an additional level of complexity in the Line Design and Assignment process, but also higher flexibility; which may be particularly useful in practical situations where the aim is to progressively integrate slow or limited workers in conventional assembly lines. We present linear models and heuristic procedures for these two new problems. Computational results show the efficiency of the proposed approaches and the efficacy of the studied layouts in different situations. (C) 2012 Elsevier B.V. All rights reserved.

Collaborative fuzzy clustering algorithms: some refinements and design guidelines

There are some variants of the widely used Fuzzy C-Means (FCM) algorithm that support clustering data distributed across different sites. Those methods have been studied under different names, like collaborative and parallel fuzzy clustering. In this study, we offer some augmentation of the two FCM-based clustering algorithms used to cluster distributed data by arriving at some constructive ways of determining essential parameters of the algorithms (including the number of clusters) and forming a set of systematically structured guidelines such as a selection of the specific algorithm depending on the nature of the data environment and the assumptions being made about the number of clusters. A thorough complexity analysis, including space, time, and communication aspects, is reported. A series of detailed numeric experiments is used to illustrate the main ideas discussed in the study.

International collaborative project to compare and monitor the nutritional composition of processed foods

Background: Chronic diseases are the leading cause of premature death and disability in the world with overnutrition a primary cause of diet-related ill health. Excess energy intake, saturated fat, sugar, and salt derived from processed foods are a major cause of disease burden. Our objective is to compare the nutritional composition of processed foods between countries, between food companies, and over time. Design: Surveys of processed foods will be done in each participating country using a standardized methodology. Information on the nutrient composition for each product will be sought either through direct chemical analysis, from the product label, or from the manufacturer. Foods will be categorized into 14 groups and 45 categories for the primary analyses which will compare mean levels of nutrients at baseline and over time. Initial commitments to collaboration have been obtained from 21 countries. Conclusions: This collaborative approach to the collation and sharing of data will enable objective and transparent tracking of processed food composition around the world. The information collected will support government and food industry efforts to improve the nutrient composition of processed foods around the world.

THE ASSOCIATION BETWEEN CHILDHOOD ADVERSITY AND COMPONENTS OF METABOLIC SYNDROME IN ADULTS WITH MOOD DISORDERS: RESULTS FROM THE INTERNATIONAL MOOD DISORDERS COLLABORATIVE PROJECT

Objective: We sought to determine whether a reported history of childhood adversity is associated with components of the National Cholesterol Education Program Adult Treatment Panel III (NCEP-ATP-III)-defined metabolic syndrome in adults with mood disorders. Method: This was a cross-sectional analysis of adult outpatients (N = 373; n = 230 female, n = 143 male; mean age [SD] = 42.86 [14.43]) from the International Mood Disorders Collaborative Project (University of Toronto and Cleveland Clinic) with DSM-IV-defined major depressive disorder and bipolar I/II disorder. Childhood adversity was measured with the Klein Trauma & Abuse-Neglect self-report scale. The groups with and without childhood adversity were compared to determine possible differences in the rates of metabolic syndrome and its components. Logistic and linear regressions adjusted for age, sex, education, employment status, and smoking were used to evaluate the association between childhood adversity and components of metabolic syndrome. Results: For the full sample, 83 subjects (22.25%) met criteria for metabolic syndrome. Individuals reporting a history of any childhood adversity had higher systolic and diastolic blood pressure (systolic: p = 0.040; diastolic: p = 0.038). Among subjects with a history of sexual abuse, a significant proportion met criteria for obesity (45.28% vs. 32.88%; p = 0.010); a trend toward overweight was found for subjects with a history of physical abuse (76.32% vs. 63.33%; p = 0.074), although this relationship did not remain significant after adjusting for potential confounders. There was no statistically significant difference in the overall rate of dyslipidemia and/or metabolic syndrome between subjects with and without childhood adversity. Conclusion: The results herein provide preliminary evidence suggesting that childhood adversity is associated with metabolic syndrome components in individuals with mood disorders. Int'l. J. Psychiatry in Medicine 2012;43:165-177)

EDGE-PRESERVING SPECKLE TEXTURE REMOVAL BY INTERFERENCE-BASED SPECKLE FILTERING FOLLOWED BY ANISOTROPIC DIFFUSION

Ultrasonography has an inherent noise pattern, called speckle, which is known to hamper object recognition for both humans and computers. Speckle noise is produced by the mutual interference of a set of scattered wavefronts. Depending on the phase of the wavefronts, the interference may be constructive or destructive, which results in brighter or darker pixels, respectively. We propose a filter that minimizes noise fluctuation while simultaneously preserving local gray level information. It is based on steps to attenuate the destructive and constructive interference present in ultrasound images. This filter, called interference-based speckle filter followed by anisotropic diffusion (ISFAD), was developed to remove speckle texture from B-mode ultrasound images, while preserving the edges and the gray level of the region. The ISFAD performance was compared with 10 other filters. The evaluation was based on their application to images simulated by Field II (developed by Jensen et al.) and the proposed filter presented the greatest structural similarity, 0.95. Functional improvement of the segmentation task was also measured, comparing rates of true positive, false positive and accuracy. Using three different segmentation techniques, ISFAD also presented the best accuracy rate (greater than 90% for structures with well-defined borders). (E-mail: fernando.okara@gmail.com) (C) 2012 World Federation for Ultrasound in Medicine & Biology.

Robotics learning based on collaborative projects

[EN]Nowadays companies demand graduates able to work in multidisciplinary and collaborative projects. Hence, new educational methods are needed in order to support a more advanced society, and progress towards a higher quality of life and sustainability. The University of the Basque Country belongs to the European Higher Education Area, which was created as a result of the Bologna process to ensure the connection and quality of European national educational systems. In this framework, this paper proposes an innovative teaching methodology developed for the "Robotics" subject course that belongs to the syllabus of the B.Sc. degree in Industrial Electronics and Automation Engineering. We present an innovative methodology for Robotics learning based on collaborative projects, aimed at responding to the demands of a multidisciplinary and multilingual society.

Progettazione e implementazione di un sistema dinamico per la gestione del packet filtering

Un livello di sicurezza che prevede l’autenticazione e autorizzazione di un utente e che permette di tenere traccia di tutte le operazioni effettuate, non esclude una rete dall’essere soggetta a incidenti informatici, che possono derivare da tentativi di accesso agli host tramite innalzamento illecito di privilegi o dai classici programmi malevoli come virus, trojan e worm. Un rimedio per identificare eventuali minacce prevede l’utilizzo di un dispositivo IDS (Intrusion Detection System) con il compito di analizzare il traffico e confrontarlo con una serie d’impronte che fanno riferimento a scenari d’intrusioni conosciute. Anche con elevate capacità di elaborazione dell’hardware, le risorse potrebbero non essere sufficienti a garantire un corretto funzionamento del servizio sull’intero traffico che attraversa una rete. L'obiettivo di questa tesi consiste nella creazione di un’applicazione con lo scopo di eseguire un’analisi preventiva, in modo da alleggerire la mole di dati da sottoporre all’IDS nella fase di scansione vera e propria del traffico. Per fare questo vengono sfruttate le statistiche calcolate su dei dati forniti direttamente dagli apparati di rete, cercando di identificare del traffico che utilizza dei protocolli noti e quindi giudicabile non pericoloso con una buona probabilità.

XWiki Mobile: architetture collaborative per device mobili

Studio di una interfaccia mobile web per la piattaforma XWiki.

Structured P2P Video Streaming and Collaborative Failure Detection

Il video streaming in peer-to-peer sta diventando sempre più popolare e utiliz- zato. Per tali applicazioni i criteri di misurazione delle performance sono: - startup delay: il tempo che intercorre tra la connessione e l’inizio della ripro- duzione dello stream (chiamato anche switching delay), - playback delay: il tempo che intercorre tra l’invio da parte della sorgente e la riproduzione dello stream da parte di un peer, - time lag: la differenza tra i playback delay di due diversi peer. Tuttavia, al giorno d’oggi i sistemi P2P per il video streaming sono interessati da considerevoli ritardi, sia nella fase di startup che in quella di riproduzione. Un recente studio su un famoso sistema P2P per lo streaming, ha mostrato che solitamente i ritardi variano tra i 10 e i 60 secondi. Gli autori hanno osservato anche che in alcuni casi i ritardi superano i 4 minuti! Si tratta quindi di gravi inconvenienti se si vuole assistere a eventi in diretta o se si vuole fruire di applicazioni interattive. Alcuni studi hanno mostrato che questi ritardi sono la conseguenza della natura non strutturata di molti sistemi P2P. Ogni stream viene suddiviso in blocchi che vengono scambiati tra i peer. A causa della diffusione non strutturata del contenuto, i peer devono continuamente scambiare informazioni con i loro vicini prima di poter inoltrare i blocchi ricevuti. Queste soluzioni sono estremamente re- sistenti ai cambiamenti della rete, ma comportano una perdita notevole in termini di prestazioni, rendendo complicato raggiungere l’obiettivo di un broadcast in realtime. In questo progetto abbiamo lavorato su un sistema P2P strutturato per il video streaming che ha mostrato di poter offrire ottimi risultati con ritardi molto vicini a quelli ottimali. In un sistema P2P strutturato ogni peer conosce esattamente quale blocchi inviare e a quali peer. Siccome il numero di peer che compongono il sistema potrebbe essere elevato, ogni peer dovrebbe operare possedendo solo una conoscenza limitata dello stato del sistema. Inoltre il sistema è in grado di gestire arrivi e partenze, anche raggruppati, richiedendo una riorganizzazione limitata della struttura. Infine, in questo progetto abbiamo progettato e implementato una soluzione personalizzata per rilevare e sostituire i peer non più in grado di cooperare. Anche per questo aspetto, l’obiettivo è stato quello di minimizzare il numero di informazioni scambiate tra peer.