Photophysical and photovoltaic properties of a PPV type copolymer containing alternated fluorene and thiophene units

The synthesis and photophysical characterization of a PPV-type copolymer containing a fluorene derivative alternated with thiophene units is presented: poly(9,9'-dioctylfluorene-thiophene) (LAPPS29). Photophysical studies demonstrated that in the solid state only preformed ground state aggregates are responsible for exciton formation. These aggregates are formed with a wide range of size distribution. The emission from isolated segments is quenched either by resonant energy transfer, or by migration processes. Also, the main photovoltaic parameters are discussed in connection with the photophysical behavior.

Professional competences of nurse to work in Intensive Care Units: an integrative review

This study aimed to identify and analyze nurses' competences to work at Intensive Care Units-ICU. An integrative review method was used, and data were collected in LILACS, SciELO and BDENF, from August to October 2010. Ten articles were identified, published in the last 12 years. Data grouping permitted the construction of thematic units related to nurses' competences: nursing care management, high-complexity nursing care delivery, decision making, leadership, communication, continuing/permanent education, human resource management, material resource management. The professional competences identified can support the outline of guidelines to constitute the profile of nursing working in intensive care units and drive/mobilize the improvement of nursing care practices.

Liquid crystal polymer brushes and their application as alignment layers in liquid crystal cells

Liquid Crystal Polymer Brushes and their Application as Alignment Layers in Liquid Crystal Cells Polymer brushes with liquid crystalline (LC) side chains were synthesized on planar glass substrates and their nematic textures were investigated. The LC polymers consist of an acrylate or a methacrylate main chain and a phenyl benzoate group as the mesogenic unit which is connected to the main chain via a flexible alkyl spacer composed of six CH2 units. The preparation of the LC polymer brushes was carried out according to the “grafting from” technique: polymerization is carried out from azo-initiators that have been previously self-assembled on the substrate. LC polymer brushes with a thickness from a few nm to 230 nm were synthesized by varying the monomer concentration and the polymerization time. The LC polymer brushes were thick enough to allow for direct observation of the nematic textures with a polarizing microscope. The LC polymer brushes grown on untreated glass substrates exhibited irregular textures (“polydomains”). The domain size is in the range of some micrometers and depends only weakly on the brush thickness. The investigations on the texture-temperature relationship of the LC brushes revealed that the brushes exhibit a surface memory effect, that is, the identical texture reappears after the LC brush sample has experienced a thermal isotropization or a solvent treatment, at which the nematic LC state has been completely destroyed. The surface memory effect is attributed to a strong anchoring of the orientation of the mesogenic units to heterogeneities at the substrate surface. The exact nature of the surface heterogeneities is unknown. The effect was observed for the LC brushes swollen with low molecular weight nematic molecules, as well. Rubbing the glass substrate with a piece of velvet cloth prior to the surface modification with the initiator and the brush growth gives rise to the formation of homogenous alignment of the mesogenic units in the LC polymer side chains. Monodomain textures were obtained for these LC brushes. The mechanism for the homogeneous alignment is based on the transfer of Nylon fibers during the rubbing process. A surfactant was mixed with the azo-initiator in modifying rubbed substrates for subsequent brush generation. Such brushes exhibited biaxial optical properties. Hybrid LC cells made from a substrate modified with biaxial brushes and a rubbed glass substrate show an orientation with a tilt angle of a = –15.6 . This work shows that LC brushes grown on rubbed surfaces fulfill the important criteria for alignment layers: the formation of macroscopic monodomains. First results indicate that by diluting the brush with molecules which are also covalently bound to the surface but induce a different orientation, a system is obtained in which the two conflicting alignment mechanisms can be used to generate a tilted alignment. In order to allow for an application of the alignment layers into a potential product, subsequent work should focus on the questions how easy and in which range the tilt angle can be controlled.

Sistemi liquido cristallini complessi: simulazioni al calcolatore e studi ESR

The aim of this PhD thesis was to study at a microscopic level different liquid crystal (LC) systems, in order to determine their physical properties, resorting to two distinct methodologies, one involving computer simulations, and the other spectroscopic techniques, in particular electron spin resonance (ESR) spectroscopy. By means of the computer simulation approach we tried to demonstrate this tool effectiveness for calculating anisotropic static properties of a LC material, as well as for predicting its behaviour and features. This required the development and adoption of suitable molecular models based on a convenient intermolecular potentials reflecting the essential molecular features of the investigated system. In particular, concerning the simulation approach, we have set up models for discotic liquid crystal dimers and we have studied, by means of Monte Carlo simulations, their phase behaviour and self­-assembling properties, with respect to the simple monomer case. Each discotic dimer is described by two oblate Gay­Berne ellipsoids connected by a flexible spacer, modelled by a harmonic "spring" of three different lengths. In particular we investigated the effects of dimerization on the transition temperatures, as well as on the characteristics of molecular aggregation displayed and the relative orientational order. Moving to the experimental results, among the many experimental techniques that are typically employed to evaluate LC system distinctive features, ESR has proved to be a powerful tool in microscopic scale investigation of the properties, structure, order and dynamics of these materials. We have taken advantage of the high sensitivity of the ESR spin probe technique to investigate increasingly complex LC systems ranging from devices constituted by a polymer matrix in which LC molecules are confined in shape of nano- droplets, as well as biaxial liquid crystalline elastomers, and dimers whose monomeric units or lateral groups are constituted by rod-like mesogens (11BCB). Reflection-mode holographic-polymer dispersed liquid crystals (H-PDLCs) are devices in which LCs are confined into nanosized (50­-300 nm) droplets, arranged in layers which alternate with polymer layers, forming a diffraction grating. We have determined the configuration of the LC local director and we have derived a model of the nanodroplet organization inside the layers. Resorting also to additional information on the nanodroplet size and shape distribution provided by SEM images of the H-PDLC cross-section, the observed director configuration has been modeled as a bidimensional distribution of elongated nanodroplets whose long axis is, on the average, parallel to the layers and whose internal director configuration is a uniaxial quasi- monodomain aligned along the nanodroplet long axis. The results suggest that the molecular organization is dictated mainly by the confinement, explaining, at least in part, the need for switching voltages significantly higher and the observed faster turn-off times in H-PDLCs compared to standard PDLC devices. Liquid crystal elastomers consist in cross-linked polymers, in which mesogens represent the monomers constituting the main chain or the laterally attached side groups. They bring together three important aspects: orientational order in amorphous soft materials, responsive molecular shape and quenched topological constraints. In biaxial nematic liquid crystalline elastomers (BLCEs), two orthogonal directions, rather than the one of normal uniaxial nematic, can be controlled, greatly enhancing their potential value for applications as novel actuators. Two versions of a side-chain BLCEs were characterized: side­-on and end­-on. Many tests have been carried out on both types of LCE, the main features detected being the lack of a significant dynamical behaviour, together with a strong permanent alignment along the principal director, and the confirmation of the transition temperatures already determined by DSC measurements. The end­-on sample demonstrates a less hindered rotation of the side group mesogenic units and a greater freedom of alignment to the magnetic field, as already shown by previous NMR studies. Biaxial nematic ESR static spectra were also obtained on the basis of Molecular Dynamics generated biaxial configurations, to be compared to the experimentally determined ones, as a mean to establish a possible relation between biaxiality and the spectral features. This provides a concrete example of the advantages of combining the computer simulation and spectroscopic approaches. Finally, the dimer α,ω-bis(4'-cyanobiphenyl-4-yl)undecane (11BCB), synthesized in the "quest" for the biaxial nematic phase has been analysed. Its importance lies in the dimer significance as building blocks in the development of new materials to be employed in innovative technological applications, such as faster switching displays, resorting to the easier aligning ability of the secondary director in biaxial phases. A preliminary series of tests were performed revealing the population of mesogenic molecules as divided into two groups: one of elongated straightened conformers sharing a common director, and one of bent molecules, which display no order, being equally distributed in the three dimensions. Employing this model, the calculated values show a consistent trend, confirming at the same time the transition temperatures indicated by the DSC measurements, together with rotational diffusion tensor values that follow closely those of the constituting monomer 5CB.

Von zwei- zu dreidimensionalen Graphitausschnitten

Zusammenfassung: 'Von zwei- zu dreidimensionalen Graphitausschnitten'Dissertation Florian Dötz Die vorliegende Arbeit zeichnet den synthetischen Weg von zwei- zu dreidimensionalen Graphitausschnitten nach und thematisiert insbesondere die Schnittstelle dieser beiden Bereiche, die durch den Übergang von planaren Systemen zu räumlichen Strukturen verkörpert wird und daher die Darstellung nicht-planarer polycyclischer aromatischer Kohlenwasserstoffe (PAH) vorsieht. Diese Zielsetzung mündet in einer dreiteiligen Gliederung der angefertigten Dissertation und sieht im ersten Teil die Synthese planarer Graphitsegmente durch oxidative Cyclodehydrierung entsprechender Oligophenylvorläufer mit Eisen(III)chlorid vor, gefolgt von der Darstellung nicht-planarer PAHs mit denselben oxidativen Methoden sowie der Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate.Der erste Abschnitt beschreibt die Synthese von kleineren PAHs als Modellverbindung für größere Systeme und ihre UV-spektroskopische Charakterisierung. Daran anknüpfend wird die Synthese mehrerer heteroatomsubstituierter Derivate des Hexa-peri-hexabenzocoronens (HBC) vorgestellt und ihre flüssigkristallinen Eigenschaften eingehend untersucht. Dabei wurde mit der oxidativen Cyclodehydrierung geeigneter Vorläufer auf Einkristalloberflächen ein neuer Weg zur Synthese dieser Verbindungen etabliert.Im Zentrum des zweiten Teils dieser Arbeit stand die Induktion von Nichtplanarität in ausgedehnten PAHs mit den im ersten Abschnitt entwickelten Synthesekonzepten. Hier konnte mit der erfolgreichen Darstellung eines 18fach methoxysubstituierten HBC-Derivats eine erstaunliche Krümmung des aromatischen Systems erreicht werden, wie durch Kristallstrukturanalyse gezeigt wurde. Anhand mehrerer Beispiele wurde ebenso die Leistungsfähigkeit der verwendeten Cyclodehydrierungsmethode verdeutlicht, da viele Vorläufermoleküle gegenüber den Reaktionsbedingungen nicht inert sind.Der letzte Teil dieser Arbeit beschreibt schließlich die Präparation und Charakterisierung dreidimensionaler, supramolekularer PAH-Aggregate auf der Basis von HBC-Amiden, deren Eigenschaften sich durch eine sorgfältige Wahl der jeweiligen Monomerbausteine manipulieren lassen. Bei Verwendung von chiralen Monomeren wird hier die Expression von supramolekularer Chiralität erreicht und durch spektroskopische und chiroptische Methoden belegt.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Charakterisierung und Stabilität von Arthropoden-Hämocyanin

Hämocyanine sind große, multimere Sauerstofftransport- proteine, die frei gelöst in der Hämolymphe von Arthropoden und Mollusken vorkommen.Zur Charakterisierung verschiedener Arthropoden-hämocyanine wurden deren molare Massen bestimmt. Die mit einer Vielwinkel-Laser-Lichtstreuapparatur ermittelten Molekulargewichte zeigten eine grosse Schwankungsbreite. Dies konnte auf Ungenauigkeiten der zur Berechnung der Molekulargewichte verwendeten spezifischen Extinktions- koeffizienten und Brechungsindex-Inkremente zurückgeführt werden.Mit der Methode der Massenspektrometrie (MALDI-TOF) bestimmte Molekulargewichte einzelner Untereinheiten des Hämocyanins der Vogelspinne Eurypelma californicum zeigten eine sehr gute Übereinstimmung mit aus der Sequenz errechneten Werten.Für das 24-mere Spinnenhämocyanin von Eurypelma californicum wurde die Stabilität gegenüber GdnHCl und der Temperatur auf den verschiedenen strukturellen Ebenen des Proteins untersucht.Viele Stabilitätsuntersuchungen werden an kleinen Proteinen durchgeführt, deren Entfaltung kooperativerfolgt. Bei größeren Proteinen mit unterschiedlichen strukturellen Bereichen (Domänen) ist der Entfaltungs-prozess weitaus komplexer. Ziel war es, durch die Denaturierung des Spinnen-Hämocyanins Erkenntnisse über die Stabilität und Entfaltung der verschiedenen strukturellen Ebenen eines so großen Proteinkomplexes zu gewinnen.Ein wichtiges Charakteristikum für die Interpretation der Entfaltungsexperimente ist die starke Löschung der Tryptophanfluoreszenz im oxygenierten Spinnen-Hämocyanin. Die Löschung kann vollständig durch Förster-Transfer erklärt werden kann. Sie bleibt auf die einzelnen Untereinheiten beschränkt und stellt somit ein reines O₂-Beladungssignal dar.Unter Einwirkung von GdnHCl dissoziiert das native, 24-mere Spinnen-Hämocyanin ohne die Entstehung langlebiger Inter- mediate. Die Untereinheiten werden durch das Oligomer stabilisiert. Die Entfaltung eines Monomers, der Unter- einheit e, folgt einer Hierarchie der verschiedenen strukturellen Ebenen des Moleküls. Die Entfaltung beginnt zunächst von außen mit der Auflockerung der Tertiärstruktur. Der Kern von Domäne II mit dem aktiven Zentrum weist hingegen eine besondere Stabilität auf.Die ausgeprägte Hitzestabilität des Eurypelma-Hämocyanins hängt vom Oligomerisierungsgrad, dem verwendeten Puffer und dessen Ausgangs-pH-Wert ab und spiegelt offensichtlich die extremen Lebensbedingungen im Habitat wider.

Synthesis and characterization of polymers containing oligothiophenes

In the present work a series of thiophene oligomers of three and six thiophene units were synthesized, starting from thiophene, and characterized. Polymers containing these electroative side groups were then prepared by two strategies. The oligomers were attached to existing polymer systems and were connected to a polymerizable unit leading to monomer containing the oligothiophenes as side groups. Subsequently the properties of the monomers and the polymers were investigated. A butylcellulose derivative carrying terthienyl side chains (BCTTE, 26) was synthesized starting from cellulose acetate and 5-(2-chloroethyl)-2,2':5',2'-terthiophene (4). The polymer had a degree of substitution (DS) of the butyl and terthienyl side chains of DSbutyl = 1.9 and DSterth = 0.35, respectively. It was successfully spread on a Langmuir-Blodgett (LB) trough and then transferred to several solid substrates. X-rays reflectometry showed an ordered architecture of the cellulose backbones. However, the terthiophene side groups were found as isotropically aligned by polarized UV-Vis spectroscopy. When used as anode material in the electropolymerization of 3-pentylthiophene (28), polythiophene was grafted onto the cellulose backbone through the terthienyl side groups. The polythiophene chains showed an average anisotropic alignment of 20 % along the LB dipping direction, calculated by means of polarized UV-Vis spectroscopy. A second butylcellulose derivative carrying sexithienyl side chains (BCST) was synthesized and investigated, starting from butylcellulose and 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl p-toluensulfonate (7). The polymer showed formation of stable LB monolayers at the air-water interface, but its transfer onto solid substrates was not successful. A poly(p-phenylene-ethynylene) bearing sexithienyl side chains (BzAcST, 31) was prepared by reaction of the two monomers 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl 2,5-diiodobenzoate (15) and 2-[b', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2':5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl 2,5-diethynylbenzoate (18). The polymer was obtained as insoluble product. Upon oxidation with FeCl3 (doping) of the polymer suspension, BzAcST showed an electrical conductivity of ó = 2.5 . 10 -6 S/cm, a typical value for semiconductors. The IR spectrum of the doped polymer presented the diagnostic bands of oxidized sexithiophene in good agreement with literature results. Along with the monomer and polymer synthesis, an a,a '-disubstituted sexithiophene, b ', b ''-dipentyl-5,5'''-bis-(2-hydroxyethyl)-2,2':5',2':5',2'':5'',2'':5'',2'''-sexithiophene (6a),was synthesized and characterized. The UV-Vis absorption of the chromophore wasinvestigated as a function of temperature and different solvents, showing a blue-shift of the absorption maximum with increasing temperature and a red-shift changing the solvent from hexane to ethanol to toluene. Monitoring the change of the UV-Vis spectrum upon electrochemical oxidation, the oxidized chromophore showed a new broad absorption band, red shifted with respect to the p -p* transition of the neutral state. Upon reduction, the new band disappeared and the UV-Vis spectrum of the chromophore was restored. Such oxidation-reduction cycles were totally reversible. This feature, together with the absorption maximum falling in the visible region, makes this chromophore a suitable compound for the development of an electrochemical sensor.Attempts to polymerize acrylic monomers carrying sexythienyl side chains both via radical polymerization, as in the case of 2-[b ', b ''-dipentyl-5'''-(2-hydroxyethyl)-2,2': 5',2':5',2'':5'',2'':5'',2'''-sexithiophen-5-yl]-ethyl acrylate (8), and anionic polymerization, as in the case of 2-{b ', b ''-dipentyl-5'''-[2-(tertbutyldimethylsiloxy)ethyl]-2,2':5',2':5',2'':5'',2'': 5'',2''' -sexithiophen-5-yl}-ethylacrylate (29), were not successful, probably due to the steric hindrance of the oligothiophene side group. However, due to the time consuming and therefore restricted availability of the monomers, a screening of the polymerization conditions towards the formation of polymeric material was not possible.

Bedeutung N- und C-terminaler Aminosäuren für die Monomer- und Dimerbildung von Lichtsammelproteinen des Photosystems I

Der LHCI-730 ist ein heterodimerer, Chlorophyll a/b-bindender Lichtsammelkomplex (LHC) des Photosystem I in höheren Pflanzen. Mit Hilfe rekombinanter, modifizierter Proteine wurde untersucht, welche terminalen Bereiche der Untereinheiten Lhca1 und Lhca4 für die Bildung von monomeren und dimeren Lichtsammelproteinen relevant sind. Durch PCR-Mutagenese modifizierte Apoproteine wurden in vitro mit Gesamtpigmentextrakt rekonstituiert und auf ihre Fähigkeit mono- bzw. dimere LHCs zu bilden untersucht.Für die Monomerbildung sind der extrinsische N-Terminus und die der amphipathischen vierten Helix folgenden Aminosäuren beider Proteine für die Faltung stabiler monomerer Pigmentproteinkomplexe nicht notwendig. Die Aminosäuren, mit deren Deletion die Monomerbildung an N- und C-Terminus verhindert wurde, verfügten über geladene (Glu, Asp), aromatische (Trp) oder neutrale Seitenketten (Leu).Die Untersuchungen zur Dimerbildung des LHCI-730 zeigten, daß am N-Terminus des Lhca1 nur bis zu einer Entfernung von drei Aminosäuren (Trp) eine Assemblierung der Untereinheiten möglich ist. Nur Phe (anstatt Trp) war in Substitutionsexperimenten im Vollängenprotein in der Lage, Dimere zu bilden. Das Ausbleiben der Dimerbildung der bis einschließlich zum Trp-39 und Ile-168 verkürzten Deletionsmutanten des Lhca4 ist vermutlich auf die Instabilität dieser Lhca4-Mutanten zurückzuführen. Die Deletion von Trp-185 am C-Terminus des Lhca1 führt zu einem Ausbleiben der Dimerbildung, die aber offensichtlich durch weitere, zuvor schon deletierte Aminosäuren beeinträchtigt wurde.

Tail bridging vs. patchiness

The subject of this thesis are the interactions between nucleosome core particles (NCPs). NCPs are the primary storage units of DNA in eucaryotic cells. Each NCP consists of a core of eight histone proteins and a strand of DNA, which is wrapped around about two times. Each histone protein has a terminal tail passing over and between the superhelix of the wrapped DNA. Special emphasis was placed on the role of the histone tails, since experimental ndings suggest that the tails have a great in uence on the mutual attraction of the NCPs. In those experiments Mangenot et al. observe a dramatic change in the con guration of the tails, which is accompanied by evidence of mutual attraction between NCPs, when a certain salt concentration is reached. Existing models used in the theoretical approaches and in simulations focus on the description of the histone core and the wrapped DNA, but neglect the histone tails. We introduce the multi chain complex as a new simulation model. Here the histone core and the wrapping DNA are modelled via a charged sphere, while the histone tails are represented by oppositely charged chains grafted on the sphere surface. We start by investigating the parameter space describing a single NCP. The Debye-Huckel potential is used to model the electrostatic interactions and to determine the e ective charge of the NCP core. This value is subsequently used for a study of the pairinteraction of two NCPs via an extensive Molecular Dynamics study. The monomer distribution of the full chain model is investigated. The existence of tail bridges between the cores is demonstrated. Finally, by discriminating between bridging and non-bridging con gurations, we can show that the effect of tail bridging between the spheres does indeed account for the observed attraction. The full chain model can serve as a model to study the acetylation of the histone tails of the nucleosome. The reduction of the charge fraction of the tails, that corresponds to the process of acetylation, leads to a reduction or even the disappearance of the attraction. A recent MC study links this e ect to the unfolding of the chromatin ber in the case of acetylated histone tails. In this case the acetylation of the histone tails leads to the formation of heterochromatin, and one could understand how larger regions of the genetic information could be inactivated through this mechanism.

Liquid crystalline oligofluorenes and their derivatives

Homo-oligofluorenes (OFn), polyfluorenes (PF2/6) and oligofluorenes with one fluorenenone group in the center (OFnK) were synthesized. They were used as model compounds to understand of the structure-property relationships of polyfluorenes and the origin of the green emission in the photoluminescence (after photooxidation of the PFs) and the electroluminescence (EL) spectra. The electronic, electrochemical properties, thermal behavior, supramolecular self-assembly, and photophysical properties of OFn, PF2/6 and OFnK were investigated. Oligofluorenes with 2-ethylhexyl side chain (OF2-OF7) from the dimer up to the heptamer were prepared by a series of stepwise transition metal mediated Suzuki and Yamamoto coupling reactions. Polyfluorene was synthesized by Yamamoto coupling of 2,7-dibromo-9,9-bis(2-ethylhexyl)fluorene. Oligofluorenes with one fluorenone group in the center (OF3K, OF5K, OF7K) were prepared by Suzuki coupling between the monoboronic fluorenyl monomer, dimer, trimer and 2, 7-dibromofluorenone. The electrochemical and electronic properties of homo-oligofluorenes (OFn) were systematically studied by several combined techniques such as cyclic voltammetry, differential pulse voltammetry, UV-vis absorption spectroscopy, steady and time-resolved fluorescence spectroscopy. It was found that the oligofluorenes behave like classical conjugated oligomers, i.e., with the increase of the chain-length, the corresponding oxidation potential, the absorption and emission maximum, ionization potential, electron affinity, band gap and the photoluminescence lifetime displayed a very good linear relation with the reciprocal number of the fluorene units (1/n). The extrapolation of these linear relations to infinite chain length predicted the electrochemical and electronic properties of the corresponding polyfluorenes. The thermal behavior, single-crystal structure and supramolecular packing, alignment properties, and molecular dynamics of the homo-oligofluorenes (OFn) up to the polymer were studied using techniques such as TGA, DSC, WAXS, POM and DS. The OFn from tetramer to heptamer show a smectic liquid crystalline phase with clearly defined isotropization temperature. The oligomers do show a glass transition which exhibits n-1 dependence and allows extrapolation to a hypothetical glass transition of the polymer at around 64 °C. A smectic packing and helix-like conformation for the oligofluorenes from tetramer to heptamer was supported by WAXS experiments, simulation, and single-crystal structure of some oligofluorene derivatives. Oligofluorenes were aligned more easily than the corresponding polymer, and the alignability increased with the molecular length from tetramer to heptamer. The molecular dynamics in a series of oligofluorenes up to the polymer was studied using dielectric spectroscopy. The photophysical properties of OFn and PF2/6 were investigated by the steady-state spectra (UV-vis absorption and fluorescence spectra) and time-resolved fluorescence spectra both in solution and thin film. The time-resolved fluorescence spectra of the oligofluorenes were measured by streak camera and gate detection technique. The lifetime of the oligofluorenes decreased with the extension of the chain-length. No green emission was observed in CW, prompt and delayed fluorescence for oligofluorenes in m-THF and film at RT and 77K. Phosphorescence was observed for oligofluorenes in frozen dilute m-THF solution at 77K and its lifetime increased with length of oligofluorenes. A linear relation was obtained for triplet energy and singlet energy as a function of the reciprocal degree of polymerization, and the singlet-triplet energy gap (S1-T1) was found to decrease with the increase of degree of polymerization. Oligofluorenes with one fluorenone unit at the center were used as model compounds to understand the origin of the low-energy (“green”) emission band in the photoluminescence and electroluminescence spectra of polyfluorenes. Their electrochemical properties were investigated by CV, and the ionization potential (Ip) and electron affinity (Ea) were calculated from the onset of oxidation and reduction of OFnK. The photophysical properties of OFnK were studied in dilute solution and thin film by steady-state spectra and time-resolved fluorescence spectra. A strong green emission accompanied with a weak blue emission were obtained in solution and only green emission was observed on film. The strong green emission of OFnK suggested that rapid energy transfer takes place from higher energy sites (fluorene segments) to lower energy sites (fluorenone unit) prior to the radiative decay of the excited species. The fluorescence spectra of OFnK also showed solvatochromism. Monoexponential decay behaviour was observed by time-resolved fluorescence measurements. In addition, the site-selective excitation and concentration dependence of the fluorescence spectra were investigated. The ratio of green and blue emission band intensities increases with the increase of the concentration. The observed strong concentration dependence of the green emission band in solution suggests that increased interchain interactions among the fluorenone-containing oligofluorene chain enhanced the emission from the fluorenone defects at higher concentration. On the other hand, the mono-exponential decay behaviour and power dependence were not influenced significantly by the concentration. We have ruled out the possibility that the green emission band originates from aggregates or excimer formation. Energy transfer was further investigated using a model system of a polyfluorene doped by OFnK. Förster-type energy transfer took place from PF2/6 to OFnK, and the energy transfer efficiency increased with increasing of the concentration of OFnK. Efficient funneling of excitation energy from the high-energy fluorene segments to the low-energy fluorenone defects results from energy migration by hopping of excitations along a single polymer chain until they are trapped on the fluorenone defects on that chain or transferred onto neighbouring chains by Förster-type interchain energy transfer process. These results imply that the red-shifted emission in polyfluorenes can originate from (usually undesirable) keto groups at the bridging carbon atoms-especially if the samples have been subject to photo- or electro-oxidation or if fluorenone units are present due to an improper purification of the monomers prior to polymerization.

Isotope geochemical and geochronologic studies of basement units in the Central Western Carpathians (Slovakia)

In dieser Arbeit werden geochronologische und isotopen-geochemische Daten zur Entwicklung der Zentralen Westlichen Karpathen präsentiert. Die Karpathen bilden die östliche Fortsetzung der Alpen und können in drei Alpine Grundgebirgsdecken unterteilt werden, von denen zwei, die Veporische und die Gemerische, bearbeitet wurden. In der Veporischen Einheit wurden polymetamorphe Grundgebirgseinheiten untersucht, um deren genaue Altersstellung zu definieren und sie isotopengeochemisch zu klassifizieren. Dagegen wurde in der der Gemerischen Einheit, welche die Veporische Einheit überlagert, ein spezialisierter S-Typ Granit im Detail untersucht, um die petrogenetischen Prozesse, die zur magmatischen Entwicklung dieses Granits geführt haben, zu identifizieren. U-Pb Datierungen an Zirkonen der Veporischen Grundgebirgseinheiten zeigen für die gesamte Veporische Einheit ordovizische Entsehungsalter an (440-470 Ma). Diese Datierungen revidieren publizierte kambrische Entstehungsalter dieses Grundgebirges. Die Isotopensignatur (epsilon Nd und 87Sr/86Sr) der ordovizischen Grundgebirgseinheiten, bestehend aus stark überprägten Amphiboliten und Gneissen, ist von der Signatur der sich im Norden anschliessenden Tatrischen Einheit gut unterscheidbar. Die Bleiisotopenzusammensetzung dieser Gesteine ist stark krustal geprägt und überschneidet sich mit der der Tatrischen Einheit. Zusammen mit den T-DM Altern sind diese Einheiten vergleichbar mit prävariskischen Einheiten der Alpen. Somit kann das ordovizische Grundgebirge zu den peri-Gondwana Terranen gezählt werden, die an einem aktiven Kontinentalrand im Norden von Gondwana gebildet wurden. In den Gesteinen der Veporischen Einheit wurde im Weiteren eine starke metamorphe überprägung und intensiver felsischer Magmatismus karbonischen Alters erkannt (320-350 Ma). Dieses Ereignis ist zeitgleich mit dem Magmatismus, welcher hauptsächlich in der sich im Norden anschliessenden Tatrischen Einheit beobachtet wird. Dieser gehört der variskischen Orogenese an. Intensive alpine Deformation und Metamorphose konnte in der südlichen Veporischen Einheit anhand der Einzelzirkondatierungen und der Isotopendaten der ordovizischen Einheiten nachgewiesen werden. Am Dlha Dolina Granit in der Gemerischen Einheit können starke Fraktionierungs- und Auto-Metasomatose-Effekte beobachtet werden. Durch die magmatische Fraktionierung wird eine Anreicherung der SEE erzeugt, wogegen die Metasomatose die SEE stark verarmt. Es kommt sogar zur Ausbildung eines Tetraden Effektes im SEE Muster, welche den starken Einfluss von Fluiden während der spät-magmatischen Phase belegt. Gesamtgesteins Pb-Pb Daten beschränken das minimale Intrusionsalter dieses Granites auf 240 Ma. Dieses Alter ist in guter übereinstimmung mit den Sr-Isotopendaten der magmatisch dominierten Gesteine, wohingegen die stark metasomatisch geprägten Gesteine ein zu radiogenes 87Sr/86Sri aufweisen. Während dieser Arbeit wurde intensiv mit der Blei-Isotopenzusammensetzung von Gesamtgesteinsproben gearbeitet. Um die Auswertung dieser Daten optimieren zu können wurde ein Computerscript für das GPL Programm Octave erstellt. Die Hauptaufgabe dieses Scripts besteht darin, Regressionen für geochronologische Anwendungen gemäss York (1969) zu berechnen. Ausserdem können mu und kappa-Werte für diese Regressionen berechnet und eine Hauptkomponentenanalyse, welche hilfreich für den Vergleich von zwei Datensätzen ist, durchgeführt werden. Am Ende der vorliegenden Arbeit wird die analytische Methode für einen Mikrowellen beschleunigten Säureaufschluss von granitoidem Material zur Bestimmung der Sr- und Nd-Isotopenzusammensetzung und der Elementkonzentrationen vorgestellt. Diese kombinierte Methode nutzt ein TIMS für die Sr und Nd Isotopenmessungen und eine Einzelkollektor-ICPMS zur Bestimmung der SEE, Rb und Sr Konzentrationen, welche mithilfe von relativen Sensitivitätsfaktoren gegenüber einem internen Standard quantifiziert werden. Diese Methode wird durch Messungen von internationalen Referenzmaterialien bewertet. Die Ergebnisse zeigen eine Reproduzierbarkeit von <10% für die Elementkonzentrationen und von <5% für Elementverhältnisse.

Tetraurea derivatives of calix[4]arenes and oligocalix[4]arenes, synthesis and self-assembly = Tetraharnstoff-Derivate von Calix[4 ]arenen und Oligocalix[4]arenen, Synthese und Selbstorganisierung

Wide rim tetraurea calix[4]arenes form hydrogen bonded dimeric capsules in apolar solvents in the presence of a suitable guest, which must be included in the cavity. The monomeric and dimeric form are never observed simultaneously under usual conditions. In general the combination of two different alkyl or aryl tetraurea derivatives results in the mixture of two homodimers and a heterodimer, however, only the heterodimeric species is observed in the 1:1 mixture of aryl and tosyl ureas. The (hetero)dimerization of oligourea calix[4]arenes (units) was used to construct larger structures via self-assembly of multiple calixarenes (building blocks) containing two (or more) covalently connected units. Among these self-assembled structures linear or branched polymers, cyclic oligomers and well-organized dendrimers were envisaged. The synthesis of the building blocks requires the preparation of calix[4]arene units possessing one (or more) functional group at the narrow or wide rim. Finally the oligourea units were covalently connected either directly or via suitable spacers within appropriate building blocks using amide bonds. Self-assembly properties of such building blocks were investigated.

Photo- and redox-active supramolecular systems containing metal complexes

The aim of this Ph.D. project has been the photophysical and photochemical characterization of new photo- and redox-active supramolecular systems. In particular we studied two different classes of compounds: metal complexes and dendrimers. Two different families of bis-cyclometalated neutral Ir(III) complexes are presented and their photophysical properties are discussed. The first family of complexes contains two 2-phenylpyridyl (ppy) or 2-(4,6-difluorophenyl)pyridyl (F2ppy) cyclometalated ligands and an ancillary ligand constituted by a phenol-oxazoline (phox), which can be substituted in the third position with a fluorine group (Fphox). In the second part of this study, we present another family of bis-cyclometalated Ir(III) complexes in which the ancillary ligand could be a chiral or an achiral bis-oxazoline (box). We report on their structural, electrochemical, photophysical, and photochemical properties. Complexes containing phox and Fphox ancillary ligands show blue luminescence with very high quantum yield, while complexes with box ligands do not show particularly interesting photophysical properties. Surprisingly these complexes give an unexpected photoreaction when irradiated with UV light in presence of dioxygen. This photoreaction originates a stable, strong blue emitting and particularly interesting photoproduct. Three successive generations of a family of polyethyleneglycol (PEG)-coated Pd(II) tetrabenzoporphyrin (PdTBP)-based dendritic nanoprobes are presented, and their ability to sensitize singlet oxygen and inflict cellular photodamage are discussed. It was found that the size of the dendrimer has practically no effect on the singlet oxygen sensitization efficiency, that approximate the unity, in spite of the strong attenuation of the triplet quenching rate with an increase in the dendrimer generation. Nevertheless, when compared against a commonly used singlet oxygen sensitizer, as Photofrin, the phosphorescent probes were found to be non-phototoxic. The lack of phototoxicity is presumably due to the inability of PEGylated probes to associate with cell surfaces and/or penetrate cellular membranes. The results suggest that protected phosphorescent probes can be safely used for oxygen measurements in biological systems in vivo. A new family of two photoswitchable (G0(Azo) and G1(Azo)) dendrimers with an azobenzene core, two cyclam units as coordination sites for metal ions, and luminescent naphthalene units at the periphery have been characterized and their coordination abilities have been studied. Because of their proximity, the various functional groups of the dendrimer may interact, so that the properties of the dendrimers are different from those exhibited by the separated functional units. Both the naphthalene fluorescence and the azobenzene photoisomerization can be observed in the dendrimer, but it has been shown that (i) the fluorescent excited state of the naphthalene units is substantially quenched by excimer and exciplex formation and by energy transfer to the azobenzene units, and (ii) in the latter case the fluorescence quenching is accompanied by the photosensitized isomerization of the trans → cis, and, with higher efficiency, the cis → trans reaction. Complexation of these dendrimers, both trans and cis isomers, with Zn(II) ions shows that complexes of 1:1 and 2:1 metal per dendrimer stoichiometry are formed showing different photophysical and photochemical properties compared to the corresponding free ligands. Practically unitary efficiency of the sensitized isomerization of trans → cis and cis → trans reaction is observed, as well as a slight increase in the naphthalene monomer emission. These results are consistent with the coordination of the cyclam amine units with Zn(II), which prevents exciplex formation. No indication of a concomitant coordination of both cyclam to a single metal ion has been obtained both for trans and cis isomer.

Statistical Mechanics of Monomer-Dimer Models on Complete and Erdös-Rényi Graphs

Nella tesi sono trattate due famiglie di modelli meccanico statistici su vari grafi: i modelli di spin ferromagnetici (o di Ising) e i modelli di monomero-dimero. Il primo capitolo è dedicato principalmente allo studio del lavoro di Dembo e Montanari, in cui viene risolto il modello di Ising su grafi aleatori. Nel secondo capitolo vengono studiati i modelli di monomero-dimero, a partire dal lavoro di Heilemann e Lieb,con l'intento di dare contributi nuovi alla teoria. I principali temi trattati sono disuguaglianze di correlazione, soluzioni esatte su alcuni grafi ad albero e sul grafo completo, la concentrazione dell'energia libera intorno al proprio valor medio sul grafo aleatorio diluito di Erdös-Rényi.