Fatalities of repair, maintenance, minor alteration, and addition works in Hong Kong

This study examines fatalities of repair, maintenance, minor alteration, and addition (RMAA) works which occurred in Hong Kong between January 2000 and October 2011. A total of 119 RMAA fatalities were recorded. Particular emphasis was placed on fall from height accidents as they accounted for the vast majority of RMAA fatal accidents for the period. A cluster analysis was conducted on fall from height fatal cases. The cluster analysis clearly identified three groups of fall from height fatalities: (1) bamboo scaffolders aged between 25 and 34 who fell from external wall/facade in the beginning of weekdays; (2) miscellaneous workers aged between 45 and 54 who fell from other/unknown places in the end of weekdays; and (3) manual labour aged between 35 and 44 who fell at floor level/from floor openings in weekends. Unsafe process and improper procedures were the main unsafe condition leading to fatalities whereas safety belt not properly used was the main unsafe action leading to fatalities. Specific safety interventions were recommended for each of these groups to help avoid these fatalities.

Relationships between safety climate and safety performance of building repair, maintenance, minor alteration, and addition (RMAA) works

The importance of repair, maintenance, minor alteration, and addition (RMAA) works is increasing in many built societies. When the volume of RMAA works increases, the occurrence of RMAA accidents also increases. Safety of RMAA works deserves more attention; however, research in this important topic remains limited. Safety climate is considered a key factor that influences safety performance. The present study aims to determine the relationships between safety climate and safety performance of RMAA works, thereby offering recommendations on improving RMAA safety. Questionnaires were dispatched to private property management companies, maintenance sections of quasi-government developers and their subcontractors, RMAA sections of general contractors, small RMAA contractors, building services contractors and trade unions in Hong Kong. In total, data from 396 questionnaires were collected from RMAA workers. The sample was divided into two equal-sized sub-samples. On the first sub-sample SEM was used to test the model, which was validated on the second sub-sample. The model revealed a significant negative relationship between RMAA safety climate and incidence of self-reported near misses and injuries, and significant positive relationships between RMAA safety climate and safety participation and safety compliance respectively. Higher RMAA safety climate was positively associated with a lower incidence of self-reported near misses and injuries and higher levels of safety participation and safety compliance.

Determining safety climate factors in the repair, maintenance, minor alteration, and addition sector of Hong Kong

The accident record of the repair, maintenance, minor alteration, and addition (RMAA) sector has been alarmingly high; however, research in the RMAA sector remains limited. Unsafe behavior is considered one of the key causes of accidents. Thus, the organizational factors that influence individual safety behavior at work continue to be the focus of many studies. The safety climate, which reflects the true priority of safety in an organization, has drawn much attention. Safety climate measurement helps to identify areas for safety improvement. The current study aims to identify safety climate factors in the RMAA sector. A questionnaire survey was conducted in the RMAA sector in Hong Kong. Data were randomly split into the calibration and the validation samples. The RMAA safety climate factors were determined by exploratory factor analysis on the calibration sample. Three safety climate factors of the RMAA works were identified: (1) management commitment to occupational health and safety (OHS) and employee involvement, (2) application of safety rules and work practices, and; (3) responsibility for health and safety. Confirmatory factor analysis (CFA) was then conducted on the validation sample. The CFA model showed satisfactory goodness of fit, reliability, and validity. The suggested RMAA safety climate factors can be utilized by construction industry practitioners in developed economies to measure the safety climate of their RMAA projects, thereby enhancing the safety of RMAA works.

Strategies for improving safety performance of repair, maintenance, minor alteration and addition (RMAA) works

Purpose Managing and maintaining infrastructure assets are one of the indispensible tasks for many government agencies to preserve the nations' economic viability and social welfare. To reduce the expenditures over the life-cycle of an infrastructure asset and extend the period for which the asset performs effectively, proper repair and maintenance are essential. While repair, maintenance, minor alteration and addition (RMAA) sector is expanding in many developed cities, occurrences of fatalities and injuries in this sector are also soaring. The purposes of this paper are to identify and then evaluate the various strategies for improving the safety performance of RMAA works. Design/methodology/approach Semi-structured interviews and two rounds of Delphi survey were conducted for data collection. Findings Raising safety awareness of RMAA workers and selecting contractors with a good record of safety performance are the two most important strategies to improve the safety performance in this sector. Technology innovations and a pay-for-safety scheme are regarded as the two least important strategies. Originality/value The paper highlights possible ways to enhance safety of the rather under-explored RMAA sector in the construction industry.

Extension of constructability to include operation and maintenance for infrastructure projects

This project was a step forward in developing an extension of the concept of constructability to include the post-occupancy stages of operation and maintenance. This was through an in-depth study of Australian health projects and interviews with professionals in the field. The thesis investigated how the operation and maintenance stakeholders can enter the initial planning, design and construction phases resulting in more efficient and effective delivery of infrastructure projects.

Residual stresses in rail-ends from the in-service insulated rail joints using neutron diffraction

Insulated rail joints (IRJs) are an integral part of the rail track signaling system and pose significant maintenance and replacement costs due to their low and fluctuating service lives. Failure occurs mainly in rail head region, bolt- holes of fishplates and web-holes of the rails. Propagation of cracks is influenced by the evolution of internal residual stresses in rails during rail manufacturing (hot-rolling, roller-straightening, and head-hardening process), and during service, particularly in heavy rail haul freight systems where loads are high. In this investigation, rail head accumulated residual stresses were analysed using neutron diffraction at the Australian Nuclear Science and Technology Organisation (ANSTO). Two ex-service two head-hardened rail joints damaged under different loading were examined and results were compared with those obtained from an unused rail joint reference sample in order to differentiate the stresses developed during rail manufacturing and stresses accumulated during rail service. Neutron diffraction analyses were carried out on the samples in longitudinal, transverse and vertical directions, and on 5mm thick sliceed samples cut by Electric Discharge Machining (EDM). For the rail joints from the service line, irrespective of loading conditions and in-service times, results revealed similar depth profiles of stress distribution. Evolution of residual stress fields in rails due to service was also accompanied by evidence of larger material flow based on reflected light and scanning electron microscopy studies. Stress evolution in the vicinity of rail ends was characterised by a compressive layer, approximately 5 mm deep, and a tension zone located approximately 5- 15mm below the surfaces. A significant variation of d0 with depth near the top surface was detected and was attributed to decarburization in the top layer induced by cold work. Stress distributions observed in longitudinal slices of the two different deformed rail samples were found to be similar. For the undeformed rail, the stress distributions obtained could be attributed to variations associated with thermo-mechanical history of the rail.

Ethnography of software maintenance activities in an industrial engineering setup

New technical and procedural interventions are less likely to be adopted in industry, unless they are smoothly integrated into the existing practices of professionals. In this paper, we provide a case study of the use of ethnographic methods for studying software bug-fixing activities at an industrial engineering conglomerate. We aimed at getting an in-depth understanding of software developers' everyday practices in bug-fixing related projects and in turn inform the design of novel productivity tools. The use of ethnography has allowed us to look at the social side of software maintenance practices. In this paper, we highlight: 1) organizational issues that influence bug-fixing activities; 2) social role of bug tracking systems, and; 3) social issues specific to different phases of bug-fixing activities.

A game theoretical approach to construction safety in the Repair, Maintenance, Alteration and Addition (RMAA) sector

Safety has long been a problem in the construction industry. Repair, maintenance, alteration and addition (RMAA) sector has emerged to play an important role in the construction industry. It accounted for 53% of the total construction market in Hong Kong in 2007. Safety performance of the RMAA words has been alarming. Statistics indicate that the percentage of fatal industrial accidents arising from RMAA work in Hong Kong was over 56% in 2006 while the remaining 44% was from new works. Effective safety measures to address the safety problems and improve safety performance of the RMAA sector are urgently needed. Unsafe behaviour has been attributed to one of the major causes of accidents. Traditional cost-benefit analysis of workers' safety behaviour seems to be inadequate. This paper proposes to adopt a game theoretical approach to analyse safety behaviour of RMAA workers. Game theory is concerned with the decision-making process in situations where outcomes depend upon choices made by one or more players. A game theoretical model between contractor and worker has been proffered. Mathematical analysis of this game model has been done and implications of the analysis have been discussed.

Assessment of costs : challenge to validity of client agreement between party entitled to costs and its solicitors

In ASIC v Atlantic 3 Financial (Aust) Pty Ltd [2006] QCA 540 the Queensland Court of Appeal dismissed an appeal from the decision of Mullins J at first instance in ASIC v Atlantic 3 Financial (Aust) Pty LTd [2006] QSC 152, the majority concluding that the client agreement in issue was not inconsistent with s48 of the Queensland Law Society Act 1952.

Effect of vertical misalignment of adjacent sleepers on the increase in dynamic loads around rail joints

In spite of the extensive usage of continuous welded rails, a number of rail joints still exist in the track. Although a number of them exist as part of turnouts in the yards where the speed is not of concern, the Insultated Rail Joints (IRJs) that exist in ballasted tracks remain a source of significant impact loading. A portion of the dynamic load generated at the rail joints due to wheel passage is transmitted to the support system which leads to permanent settlements of the ballast layer with subsequent vertical misalignment of the sleepers around the rail joints. The vertical misalignment of the adjacent sleepers forms a source of high frequency dynamic load raisers causing significant maintenance work including localised grinding of railhead around the joint, re-alignment of the sleepers and/or ballast tamping or track component renewals/repairs. These localised maintenance activities often require manual inspections and disruptions to the train traffic loading to significant costs to the rail industry. Whilst a number of studies have modelled the effect of joints as dips, none have specifically attended to the effect of vertical misalignment of the sleepers on the dynamic response of rail joints. This paper presents a coupled finite element track model and rigid body track-vehicle interaction model through which the effects of vertical of sleepers on the increase in dynamic loads around the IRJ are studied. The finite element track model is employed to determine the generated dip from elastic deformations as well as the vertical displacement of sleepers around the joint. These data (dip and vertical misalignments) are then imported into the rigid body vehicle-track interaction model to calculate the dynamic loads.

A lesson in costs recovery

In La Spina v Macdonnells Law [2014] QSC 44 the Queensland Court of Appeal set aside a judgment entered in circumstances where the appellant had not been given the requisite notice of the application under r31 of the Uniform Civil Procedure Rules 1999 (Qld)(UCPR). The court found there had been a denial of natural justice. The court also considered whether in any event the entry of judgment in the circumstances was a proper exercise of the powers which may be exercised on an application for directions under r743H of the UCPR.

Practice and Procedure - offers to settle - no costs benefit if no compromise

In Jones v Millward [2005]QCA76 the Queensland Court of Appeal held that an offer to settle under the UCPR will not attract a costs benefit unless it involves some element of compromise

Indemnity costs - whether indemnity costs can be ordered in Magistrates Court

In Asset Loan Management v Mamap Pty Ltd [2005] QDC 295, McGill DCJ held that costs may be recovered in Magistrates Courts on the indemnity basis. His Honour was satisfied his conclusion in this respect was not precluded by the decision of the Court of Appeal in Beardmore v Franklins Management Services Pty Ltd [2002] QCA 60

Practice and Procedures - costs - offer to settle by plaintiff under UCPR r360 for amount of claim plus costs

In JLG Industries Inc v Teetree Pty Ltd [2002] QDC 031 the court considered the implications in terms of costs of an offer to settle by the plaintiff under the UCPR where the element of compromise involved only acceptance of the amount of claim without interest.

Costs - solicitor's retainer on 'no win, no fee' basis - meaning of 'win' - solicitor not entitled to recover excess of costs over amount paid on settlement - no consideration for variation of oral retainer.

In Baker Johnson Lawyers v Jorgensen [2002] QDC 205 McGill DCJ considered the meaning of a 'no win, no fee' retainer and concluded that, in the absence of qualification by agreement, solicitors retained on that basis were not entitled to recover costs exceeding the amount of any judgment or settlement.