Melhoramento genético florestal e o desafio imposto pela doença da murchidão do pinheiro

Mestrado em Engenharia Florestal e dos Recursos Naturais - Instituto Superior de Agronomia - UL

A sustentabilidade ambiental das cidades sob a ótica da pegada de carbono e do sistema verde de Brasília

Tese (doutorado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2015.

Sustentabilidade ambiental e humana da produção de alimentos: uma análise comparativa entre agricultura biológica e convencional

A produção e o consumo de alimentos produzidos em agricultura biológica (AB) apoiam-se na ideia da sua superior qualidade nutricional e em supostos efeitos benéficos na saúde humana, bem como no menor impacto ambiental da AB relativamente à agricultura convencional (AC). Mas serão mesmo as dietas baseadas nestes alimentos significativamente mais saudáveis para as pessoas e o ambiente e, portanto, mais sustentáveis que as dietas baseadas no modo convencional? O objetivo deste trabalho é apresentar uma síntese da informação publicada na última década referente a análises comparativas entre AB e AC, através de um conjunto de indicadores de qualidade ambiental e de saúde humana. Foram consultados diversos estudos, privilegiando aqueles que recorreram a um conjunto de indicadores de qualidade ambiental e de saúde humana. A nível ambiental, os estudos apontam para que, apesar das práticas biológicas terem, em geral, impactes menos negativos por unidade de área que as práticas convencionais, o mesmo não se verifica por unidade de produto. Os estudos sobre o impacto comparativo na biodiversidade mostram a tendência benéfica da AB, apesar de as diferenças se afigurarem pouco consistentes. A presença de resíduos de pesticidas e metais pesados em alimentos biológicos é significativamente menor que nos convencionais. A nível nutricional, os vegetais e frutas biológicos apresentam consistentemente conteúdos mais elevados em metabolitos secundários que os convencionais. Todavia, os estudos disponíveis sobre efeitos na saúde são pouco conclusivos quanto a diferenças consistentes entre modos de produção. Evidências científicas suportam a ideia geral de que a AB tende a constituir um modo de produção de alimentos ambiental e humanamente mais sustentável que a AC, embora as diferenças sejam consistentes apenas em alguns indicadores.

Estudo da substituição de agregados miúdos naturais por pó de pedra em concreto de cimento portland

The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition

Desenvolvimento de membranas porosas de alumina para fins de tratamento de efluente industrial têxtil

Textile production has been considered as an activity of high environmental impact due to the generation of large volumes of waste water with high load of organic compounds and strongly colored effluents, toxic and difficult biodegradability. This thesis deals with obtaining porous alumina ceramic membranes for filtration of textile effluent in the removal of contaminants, mainly color and turbidity. Two types of alumina with different particle sizes as a basis for the preparation of formulation for mass production of ceramic samples and membranes. The technological properties of the samples were evaluated after using sintering conditions: 1,350ºC-2H, 1,450ºC-30M, 1,450ºC-2H, 1,475ºC-30M and 1,475ºC-2H. The sintered samples were characterized by XRD, XRF, AG, TG, DSC, DL, AA, MEA, RL, MRF-3P, SEM and Intrusion Porosimetry by Mercury. After the characterization, a standard membrane was selected with their respective sintering condition for the filterability tests. The effluent was provided by a local Textile Industry and characterized at the entry and exit of the treatment plant. A statistical analysis was used to study the effluent using the following parameters: pH, temperature, EC, SS, SD, oil and grease, turbidity, COD, DO, total phosphorus, chlorides, phenols, metals and fecal coliform. The filtered effluent was evaluated by using the same parameters. These results demonstrate that the feasibility of the use of porous alumina ceramic membranes for removing contaminants from textile effluent with improved average pore size of 0.4 micrometre (distribution range varying from 0,025 to 2.0 micrometre), with total porosity of 29.66%, and average percentages of color removal efficiency of 89.02%, 92.49% of SS, turbidity of 94.55%, metals 2.70% (manganese) to 71.52% (iron) according to each metal and COD removal of 72.80%

Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

Estudo de reatores eletroquímicos para remoção de Cu2+ , Zn2+, Fenol e BTEX em água produzida

The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms

OGM e biossegurança ambiental.

2009

De patrones a parámetros : una evaluación de los patrones espaciales en los pabellones de la Serpentine Gallery (2000-2015)

La actual realidad socioeconómica, marcada por la (r)evolución tecnológica de los último años y la explosión demográfica y urbana, conlleva dos grandes problemas. Por un lado el cambio climático derivado de la sobreexplotación de los recursos y energías no-renovables, y por otro, la pérdida de las identidades y procesos culturales específicos provocada por la globalización. Ante ellos, diversos autores plantean sacar partido de las propias tecnologías y la nueva sociedad en red para dar una respuesta acorde al momento actual. Las herramientas computacionales permiten una mayor complejidad de los diseños alcanzando una optimización de recursos y procesos, minimizando su impacto ambiental. Frente a la producción en masa y la pérdida de identidad, el planteamiento informático de problemas globales permite pasar de la producción en masa del siglo pasado a la ‘customización’ en masa al dar respuestas específicas para cada contexto. Por otro lado es necesario que esos procesos computacionales conecten y hagan partícipes del diseño a los diferentes actores sociales implicados. Es por ello que esta investigación se basará en los patrones espaciales de Christopher Alexander y otros modelos algorítmicos de diseño por ordenador puesto que estos describen soluciones paramétricas a conflictos recurrentes de diseño de arquitectura. Su planteamiento permite que cada solución base genere respuestas específicas, a la vez que esta es corregida y optimizada por todos sus utilizadores al poder ser compartida digitalmente. Con ello se busca que el diseño de arquitectura responda a criterios objetivos basados en la experiencia y la crítica participativa y democrática basada en los patrones, de tal modo que los diseños no surjan de un planteamiento top-down impuesto y cerrado, sino que en ellos gane importancia la participación activa de los actores sociales implicados en la definición y uso de los mismos. Por último, esta investigación procura mostrar cómo los patrones pueden jugar un papel determinante en la conceptualización abstracta del diseño, mientras que otros métodos algorítmicos alcanzarán fases del proyecto más concretas. De este modo, los patrones digitales que se pretenden se centran en la customización del diseño, mientras que el uso que le dan otros autores persigue la optimización del mismo. Para ello la investigación recurrirá al análisis de los pabellones de verano de la Serpentine Gallery como casos de estudio en los que comprobar la repercusión de los patrones en el diseño de arquitectura actual y su posible adaptación al diseño paramétrico.

Aplicabilidad del plan de sostenibilidad ambiental de la Empresa Volkswagen

108 p.

Padronização e flexibilidade: proposta de um edifício tipo para uma escola técnica profissionalizante

Nowadays the acquisition of sustainable elements and concepts in construction has been increasingly discussed, improved and incorporated to buildings, since the sector directly interferes in the urban space and environment, representing environmental impact. In order to make a sustainable building (Green Building) it is vital to incorporate less damaging constructive practice, starting from the project until the operation of the enterprise, that means to consider an integrated process of conception, implementation, construction and operation. The more effective sustainable principles participation in architecture happens at the projecting step through minimal environment impact solutions. Among the issues varieties that goes with sustainability proposal of the buildings project, there were added to this work the elements that are directly attached to bioclimatic architecture, more specifically the climate variation, ventilation, lighting and sunlight, that directly affect the project conception. It is important to put in evidence that architecture role goes far beyond the simple activity of building spaces; it is the sequence of political, economic, social and cultural elements, having the users as the main apparatus to its materialization. Thereby this professional dissertation consists of an architecture draft for a professional and technological school in the Rio Grande do Norte State, this dissertation is based on the analysis of previous experience and the bioclimatic principles that implicate in building on hot and dry, hot and humid climates, and the use of strategic solutions that aim the optimization of natural light and ventilation

Análise de Sustentabilidade em Projetos de Instalações de Produção de Petróleo

A proposal for a global analysis of sustainability in projects related in oil facilities is presented. By considering economic, environmental and social aspects in the early stages of design, the suggested method is more comprehensive and can be used to complement the analysis commonly applied in the petroleum industry, such as: Study of Technical and Economic Feasibility; Environmental Impact Assessment and Risk Analysis. Several authors, associations, certification bodies and oil companies suggest different approaches to study sustainability in some specific activities (or industries). In this study, a checklist of significant sustainability aspects for the oil industry (surface facilities) was assembled. In addition, a matrix was developed to assess the sustainability items relevant to these projects. In this work, the checklist interacts with the matrix to perform a "Preliminary Analysis of Sustainability of the Enterprise" (APSE). This method allows the identification of aspects that contribute significantly to global sustainability. From this analysis, which includes economic, social and environmental aspects, is built a report that is used to analyze qualitatively and quantitatively the impact of the sustainability aspects of the project. In this analysis are identified items that strongly influence the economic, social or environmental aspects and evaluated alternatives that can increase the overall sustainability of the project. Finally, the alternatives that can be used to indicate the most sustainable option are identified. This method was applied in a project (design) of a small offshore platform. This case study shows how the APSE can contribute to the identification of sustainability initiatives for the enterprise. The results showed that relevant aspects can contribute decisively to global sustainability. Finally, it was observed that the proposed method can contribute to increased rates of sustainability, even after application of analysis commonly used in these projects

Propuesta ambiental con enfoque en la clasificación de residuos sólidos en la Liga de Ciclismo de Bogotá

53 p.

Avaliação de desempenho para qualidade ambiental.

Para uma adequada gestão ambiental, é necessária uma criteriosa avaliação do desempenho ambiental da propriedade agrícola, o que pode ser feito com a aplicação de procedimentos de Avaliação de Impacto Ambiental (AIA), integrando-se as dimensões sociais, econômicas e ecológicas da sustentabilidade. A Embrapa tem dedicado importante esforço para o desenvolvimento, a validação e a utilização de sistemas de Avaliação de Impactos Ambientais (AIA), desde a escala de estabelecimentos rurais até a escala institucional.

Diversidade de macroalgas marinhas bentônicas dos recifes de Maracajaú, área de preservação ambiental dos recifes de corais, Rio Grande do Norte, Brasil

Despite the importance of coral reefs to humanity, these environments have been threatened throughout the world. Several factors contribute to the degradation of these ecosystems. The Maracajaú Reef Complex, in Rio Grande do Norte state is part of the Coral Reefs Environment Preservation Area in northeastern Brazil. This area has been receiving an increasing influx of tourism and the integrity of the local reefs is a matter of concern. In this study, the reef macroalgae communities were studied and compared within two areas distinguished by the presence or absence of tourism activities. Two sample sites were chosen: the first one, where diving activities are intense; and the other, where these practices do not occur. Samples were collected at both sites within a quadrate of 625 cm2 of area randomly thrown 5 times along a 10 meters transect line. Richness, Shannon-Hill diversity and Simpson dominance indices were determined based on biomass data. Similarity between sites was analyzed with Bray-Curtis similarity and distance index. Fifty-eight macroalgae species were observed, including 7 Chlorophyta, 13 Phaeophyta and 38 Rhodophyta. In the non-disturbed site, 49 species were found, while at the disturbed site, there were 42 species. Dictyotaceae and Corallinaceae were the most representative families at the non-disturbed site, and Rhodomelaceae and Dictyotaceae at the disturbed site. The non-disturbed site presented a higher biomass and the greatest richness and diversity indices. In the disturbed site the dominance index was greater and Caulerpa racemosa was the dominant species. The dendogram based on similarity index showed two major clusters, and an isolated element at the center that corresponds to a sample from the disturbed site. In the first cluster, samples from the non-impacted site were predominant and fleshy brown algae were more conspicuous. The second cluster was composed primarily of samples from the impacted site, where C. racemosa and red filamentous and erect calcareous algae associations (turf forming) were observed covering large extensions. These associations are represented by groups of algae adapted to environments where disturbances are frequent. They can grow rapidly on substrate where benthic community was removed and do not allow the establishment of other species. The results of the present study show that tourism activity is an impacting factor that has been causing shifts in macroalgae communities in the Maracajaú Reef Complex