High fat-induced obesity associated with insulin-resistance increases FGF-2 content and causes stromal hyperplasia in rat ventral prostate

Obesity affects sex hormone secretion, which can negatively influence prostatic structure, homeostasis, and disease. This investigation aimed to evaluate the repercussions of obesity induced by a high-fat diet on the rat prostate, with or without treatment with the aromatase inhibitor, Letrozole. Adult Wistar rats were fed a high-fat diet (20% saturated fat, O) for 15 weeks to induce obesity or received a balanced diet (4% fat, C). Then, a group of C and O rats were daily treated with Letrozole (1 mg/kg b.w. per day) for 2 weeks (CL and OL, respectively). Subsequently, ventral prostate was processed for analysis by transmission electron microscopy, immunohistochemistry, and Western blotting. Obesity decreased 70% of the testosterone plasma level. The prostate showed epithelial atrophy and dilated acini in the intermediate portion and epithelial wrinkling in the distal tips. The relative frequency of smooth muscle alpha-actin in the O group increased by 67%. Ultrastructurally, epithelial cells in obese animals presented altered secretory organelles, lipid droplets, and thicker subjacent fibromuscular layer. Letrozole treatment caused a partial restoration of the prostatic changes caused by obesity. Obesity increased the prostatic content of fibroblast growth factor-2 (FGF-2) by 150%, and Letrozole treatment increased this protein even more in the control and obese groups. This investigation shows that obesity provokes structural and ultrastructural changes in the epithelium of rat prostate; these changes might affect gland homeostasis and physiology. The epithelial and smooth muscle cell hyperplasia and increased FGF-2 expression observed in this experimental model of obesity/insulin-resistance might explain the high frequency of benign prostatic hyperplasia in insulin-resistant men.

High-Fat Diet Obesity Associated With Insulin Resistance Increases Cell Proliferation, Estrogen Receptor, and PI3K Proteins in Rat Ventral Prostate

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Esterase enzymes involved in pyrethroid and organophosphate resistance in a Brazilian population of Riphicephallus (Boophilus) microplus (Acari, Ixodidae)

Esterases are a group of enzymes that are reportedly associated with acaricide resistance in Riphicephallus (Boophilus) microplus. A comparative analysis was made of the esterase patterns in malathion and deltamethrin-sensitive, tolerant and resistant tick groups, using non-denaturing polyacrylamide gel electrophoresis. Electrophoretical profiles revealed four bands of esterase activity against alpha-naphthyl acetate; which were dubbed EST-1 to EST-4. The EST-3 and EST-4 were detected in all strains and were classified as carboxylesterases (CaEs). The EST-2, classified as an acetylcholinesterase (AChE), was detected in all groups, but its staining intensity increased from susceptible to resistant groups, indicating an altered production according to the degree of resistance. EST-1, which was also classified as an AChE, was detected exclusively in tolerant and resistant groups to both acaricides, but displayed greater activity in the malathion-resistant group. These data suggest that these AChEs may represent an important detoxification strategy developed to overcome the effects of acaricides. (C) 2008 Elsevier B.V. All rights reserved.

Prevalence and antifungal resistance profile of Candida spp. oral isolates from patients with type 1 and 2 diabetes mellitus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical stability and corrosion resistance of Ti-Mo alloys for biomedical applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of HVOF parameters on the corrosion and wear resistance of WC-Co coatings sprayed on AA7050 T7

Thermal spray WC-based coatings are widely used in the aircraft industry mainly for their resistance to wear, reworking and rebuilding operations and repair of worn components on landing gear, hydraulic cylinders, actuators, propeller hub assemblies, gas turbine engines, and so on. The aircraft industry is also trying to use thermal spray technology to replace electroplating coatings such as hard chromium. In the present work, WC-Co coatings were built up on an AA 7050 aluminum alloy using high velocity oxygen fuel (HVOF) technology and a liquid nitrogen cooling prototype system. The influence of the spray parameters (standard conditions, W19S, increasing the oxygen flux, W19H, and also increasing the carrier gas flux, W19F) on corrosion, friction, and abrasive wear resistance were also studied. The coatings were characterized using optical (OM) and scanning electron (SEM) microscopy, and X-ray diffraction (XRD). The friction and abrasive wear resistance of the coatings were studied using Rubber Wheel and Ball on Disk tests. The electrochemical studies were conducted using open-circuit potential (E(oc)) measurements and electrochemical impedance spectroscopy (EIS). Differences among coated samples were mainly related to the variation of the thermal spray parameters used during the spray process. No significant differences were observed in the wear resistance for the coatings studied, and all of them showed a wear rate around 10 times lower than that of the aluminum alloy. The results of mass loss and wear rate were interpreted considering different mechanisms. Comparing the different spray parameters, the oxygen flux (higher flame temperature) produced the sample which showed the highest corrosion resistance in aerated and unstirred 3.5% NaCl solution. Aluminum ions were detected on the surface almost immediately after the immersion of samples W19S and W19F in chloride solution, showing that the electrolyte reached the substrate and galvanic corrosion probably occurred. For sample W19H, aluminum ions were not detected even after 120 min of immersion in NaCl solution. (C) 2008 Elsevier B.V. All rights reserved.

Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance

Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. The application of WC-Ni coatings in corrosive media is 14 not recommended due to the poor corrosion resistance of the (pure Ni) metallic matrix. It is well known that the addition of Cr to the metallic binder improves the corrosion properties. Erosion-corrosion performance of thermal spray coatings is widely influenced by ceramic phase composition, the size of ceramic particles and also the composition of the metallic binder. In the present work, two types of HVOF thermal spray coatings (Cr3C2-NiCr and WC-Ni) obtained with different spray conditions were studied and compared with conventional micro-cracked hard chromium coatings. Both as-sprayed and polished samples were tested under two erosion-corrosion conditions with different erosivity. Tungsten carbide coatings showed better performance under the most erosive condition, while chromium carbide coatings were superior under less erosive conditions. Some of the tungsten carbide coatings and hard chromium showed similar erosion-corrosion behaviour under more and less erosive conditions. The erosion-corrosion and electrochemical results showed that surface polishing improved the erosion-corrosion properties of the thermally sprayed coatings. The corrosion behaviour of the different coatings has been compared using Electrochemical Impedance Spectroscopy (EIS) and polarization curves. Total material loss due to erosion-corrosion was determined by weight loss measurements. An estimation of the corrosion contribution to the total weight loss was also given. (c) 2007 Elsevier B.V. All rights reserved.

Improvement of fatigue resistance on La modified BiFeO(3) thin films

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Fatores que afetam a oviposição de Bemisia tabaci (Genn.) biótipo B (Hemiptera: Aleyrodidae) em pimentão

Para avaliar o comportamento de oviposição da mosca-branca, Bemisia tabaci (Genn.) biótipo B, em relação à posição da folha na planta, à área do limbo foliar, à idade da planta e à densidade de adultos na cultura do pimentão, foram realizados três testes, utilizando-se a cultivar de pimentão Magali-R. Os testes foram realizados em casa-de-vegetação e no Laboratório de Entomologia da DEFERS/UNESP, Campus de Ilha Solteira-SP. Nos testes com chance de escolha, plantas com 25, 30, 35, 40 e 45 dias de idade foram utilizadas para avaliar os efeitos da idade sobre a oviposição da mosca-branca, enquanto que em plantas com 35 dias estudou-se a distribuição de ovos da mosca-branca na planta e no limbo foliar. em plantas de 35 dias de idade, avaliou-se o efeito de diferentes densidades populacionais do inseto (50, 100, 150, 200 e 250 adultos/ planta) sobre o número de ovos depositados. No teste sem chance de escolha, utilizaram-se plantas com 35 dias de idade para avaliar o efeito das densidades sobre a oviposição da mosca-branca. B. tabaci biótipo B preferiu ovipositar da terceira a sexta folha a partir do ápice da planta localizadas nos terços médio e superior de planta de pimentão e nas áreas do limbo foliar localizadas nos lóbulos direito e esquerdo, próximas à base da folha. Plantas com 40 e 45 dias, são preferidas para oviposição e, em densidades de 200 e 250 adultos por planta, as moscas-brancas depositam ovos em número suficiente para diferenciar genótipos de pimentão com diferentes graus resistência a esta praga.

Antiretroviral resistance mutations in human immunodeficiency virus type 1 infected patients enrolled in genotype testing at the Central Public Health Laboratory, São Paulo, Brazil: preliminary results

Antiretroviral resistance mutations (ARM) are one of the major obstacles for pharmacological human immunodeficiency virus (HIV) suppression. Plasma HIV-1 RNA from 306 patients on antiretroviral therapy with virological failure was analyzed, most of them (60%) exposed to three or more regimens, and 28% of them have started therapy before 1997. The most common regimens in use at the time of genotype testing were AZT/3TC/nelfinavir, 3TC/D4T/nelfinavir and AZT/3TC/efavirenz. The majority of ARM occurred at protease (PR) gene at residue L90 (41%) and V82 (25%); at reverse transcriptase (RT) gene, mutations at residue M184 (V/I) were observed in 64%. One or more thymidine analogue mutations were detected in 73%. The number of ARM at PR gene increased from a mean of four mutations per patient who showed virological failure at the first ARV regimens to six mutations per patient exposed to six or more regimens; similar trend in RT was also observed. No differences in ARM at principal codon to the three drug classes for HIV-1 clades B or F were observed, but some polymorphisms in secondary codons showed significant differences. Strategies to improve the cost effectiveness of drug therapy and to optimize the sequencing and the rescue therapy are the major health priorities.

New compositions of fluoroindate glasses with higher chemical resistance

In this paper, glasses in the systems In-Ba-Mg and In-Ba-Zn-Sr-Mg were water leachead at 80ºC showing surface degradation after 72 hours of leaching. The extent of such degradation is determined by the solubility and the concentration of the elemental fluorides that constitute the glasses. The formation of a layer of crystallized phases on the surface of the samples was observed. Small weight losses were registered and the absence of water on the glass matrix after the attack suggested that the use of MgF2 in the systems studied can lead to better results against moisture corrosion when compared to other fluoride glasses such as the fluorozirconates.

Oviposition preference of Bemisia tabaci (Genn.) biotype B (Homoptera: Aleyrodidae) for bean genotypes containing arcelin in the seeds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antibiosis effects of wild bean lines containing arcelin on Bemisia tabaci (Genn.) biotype B (Homoptera: Aleyrodidae)

A biologia de Bemisia tabaci biótipo B (Genn.) foi avaliada em genótipos de feijoeiro (Phaseolus vulgaris L.) que contêm arcelina em suas sementes. Foi também realizada análise bioquímica de proteínas, em sementes e em folhas dos genótipos de feijoeiro, a fim de verificar se haveria traços de arcelina nas folhas dos materiais a serem avaliados. Os testes foram conduzidos em condições de casa de vegetação, nas épocas das águas e da seca, em dois anos consecutivos, com os seguintes genótipos: ARC 3s, ARC 5s (genótipos selvagens portadores de arcelina); ARC 1, ARC 2, ARC 3, ARC 4 (linhagens quase-isogênicas portadoras de arcelina - Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)), Porrillo 70, Bolinha e IAPAR MD 808 (genótipos sem arcelina). Os genótipos selvagens, ARC 3s e ARC 5s, apresentaram altos níveis de antibiose, com ênfase para o ARC 5s (as ninfas tiveram alta mortalidade, em torno de 90%). O prolongamento do ciclo de desenvolvimento dos insetos provenientes do genótipo ARC 5s podem sugerir uma resistência do tipo antibiose e/ou não-preferência para alimentação. A resistência dos genótipos selvagens não está relacionada com a presença de arcelina nas sementes, já que nenhum traço dessa proteína foi encontrado nas folhas destes.

Effect of doses of fungicides and plant resistance activators on the control of Rhizoctonia foliar blight of soybean, and on Rhizoctonia solani AG1-IA in vitro development

Rhizoctonia foliar blight (RFB) of soybean [Glycine max (L.) Merrill] occurs in many tropical and subtropical regions, causing yield reductions of up to 70% and in Brazil, up to 60%. The disease is caused by Rhizoetonia solani AG1-IA and AG1-IB, and by AG2-3 in Japan. RFB occurs in the North, Northeast and Mid-west regions of Brazil. Chemical control remains the only effective method of controlling RFB, but its efficiency depends upon environmental conditions. In this study, 18 fungicides, salicylic acid (SA) and acibenzolar-s-methyl (ASM) were evaluated on R. solani AG1-IA in vitro, by mycelial growth rating and estimating effective concentration for 50% (EC 50) and 90% (EC 90) inhibition of mycelial growth, and in vivo by reduction of disease severity on soybean plants in greenhouse conditions. Mycelial growth was strongly inhibited by the fungicides pyraclostrobin + boscalid and fludioxonil. Preventive fungicide applications were the most effective. Strobilurins were more efficient both in preventive and curative applications. Best results with plant resistance activators were obtained with SA (2.5 mM) sprayed at 20 d before inoculation and with ASM (12.5 mg a.i. l(-1)) 10 d before inoculation. (c) 2005 Elsevier Ltd. All rights reserved.