Protótipo de um microgerador termoelétrico de estado sólido: cogeração a gás

The thermoelectric energy conversion can be performed directly on generators without moving parts, using the principle of SEEBECK effect, obtained in junctions of drivers' thermocouples and most recently in semiconductor junctions type p-n which have increased efficiency of conversion. When termogenerators are exposed to the temperature difference (thermal gradient) eletromotriz a force is generated inducing the appearance of an electric current in the circuit. Thus, it is possible to convert the heat of combustion of a gas through a burner in power, being a thermoelectric generator. The development of infrared burners, using porous ceramic plate, is possible to improve the efficiency of heating, and reduce harmful emissions such as CO, CO2, NOx, etc.. In recent years the meliorate of thermoelectric modules semiconductor (TEG's) has stimulated the development of devices generating and recovery of thermal irreversibility of thermal machines and processes, improving energy efficiency and exergy these systems, especially processes that enable the cogeneration of energy. This work is based on the construction and evaluation of a prototype in a pilot scale, for energy generation to specific applications. The unit uses a fuel gas (LPG) as a primary energy source. The prototype consists of a porous plate burner infrared, an adapter to the module generator, a set of semiconductor modules purchased from Hi-Z Inc. and a heat exchanger to be used as cold source. The prototype was mounted on a test bench, using a system of acquisition of temperature, a system of application of load and instrumentation to assess its functioning and performance. The prototype had an efficiency of chemical conversion of 0.31% for electrical and heat recovery for cogeneration of about 33.2%, resulting in an overall efficiency of 33.51%. The efficiency of energy exergy next shows that the use of primary energy to useful fuel was satisfactory, although the proposed mechanism has also has a low performance due to underuse of the area heated by the small number of modules, as well as a thermal gradient below the ideal informed by the manufacturer, and other factors. The test methodology adopted proved to be suitable for evaluating the prototype

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Influência da lubrirrefrigeração na qualidade superficial de metais retificados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação das condições higiênico-sanitárias da produção de refeições à base de carne da alimentação escolar no município de Natal-RN

The National School Nutrition Program is the oldest program in the country directed at food and nutrition safety. Its aims are to offer nutritional food as a supplement to students of public and philanthropic schools. Studying school nutrition transcends the investigation as a purely social program, given that it reaches the fields of public health, nutrition and food, using a wide variety of approaches. Thus, it is characterized by a multidisciplinary study, where the disciplines work side by side in distinct aspects of a single problem. Aim: This study aims to assess hygiene practices during the preparation of meat-based meals in public schools in the city of Natal, Brazil. Methods: A list was applied at 27 schools to identify the procedures of good food preparation practices. In addition, cooking and meal distribution temperature were measured and a microbiological analysis of the final preparation and of the water used in preparing it was performed. For microbiological analyses of the food, we analyzed coliforms at 45°C, coliforms at 35°C and Enterococcus, and for the water, we analyzed thermotolerant coliforms and total coliforms, using the methods recommended by APHA, 1995. Results: Most of the schools did not meet the required standards in all the variables related to good food preparation practices, except for the time spent preparing the meat, in which 89% were within the norm. Cooking temperature of the meals was within the standard; however, the temperature at distribution and the time spent dispensing the meals were inadequate. Of the 27 schools, 22 (81.5%) showed the presence of coliforms at 35° C in at least one meal sample and 18 (66.7%) had values above the recommended limit for coliforms at 45°C. The presence of E. coli was identified in 6.1% of the samples analyzed. The presence of Enterococcus was not found at any of the schools. With respect to the water, the North district of the city was the only one that did not meet the standards for the two indicators evaluated. The contamination found was not associated with the hygiene or food storage problems observed. Conclusions: The results show that the hygiene-sanitary conditions of meat-based public school meals were unsatisfactory, demonstrating the need for improvements in the production process to preserve the health of the student population. Multidisciplinarity: Researchers from the areas of food microbiology, nutrition, public health and statistics took part in this study, a decisive factor for characterizing the research as multidisciplinary

Fontes de proteína e carboidratos para cães e gatos

O mercado de alimentos para cães e gatos absorve importante quantidade de proteínas e carboidratos, apesar disso poucos estudos existem sobre digestibilidade e energia metabolizável destes ingredientes. Arroz e milho têm sido considerados as melhores fontes de amido, mas demonstra-se que o sorgo é igualmente bem digerido por cães. Na interpretação dos estudos, deve-se distinguir os que empregaram farinhas ou amidos purificados dos que empregaram ingredientes moídos, como utilizado na fabricação de alimentos para animais de companhia. Além de sua digestibilidade e valor energético, amidos interferem na glicemia de cães, o que torna interessante se empregar, para animais em condições específicas, fontes de carboidrato que levem à menores respostas de glicose e insulina. Devido a elevada necessidade de proteína, ingredientes protéicos são importantes nas formulações. Proteínas de origem animal apresentam maior variação em composição química, qualidade e digestibilidade que as de origem vegetal. Farinhas de origem animal podem apresentar excesso de matéria mineral, limitando sua inclusão na fórmula, enquanto derivados protéicos vegetais apresentam diversos fatores anti-nutricionais que devem ser inativados durante seu processamento. Demonstra-se que proteínas vegetais apresentam boa digestibilidade e energia metabolizável para cães e gatos, sendo sua inclusão interessante para reduzir a matéria mineral da dieta, controlar o excesso de bases do alimento e manter adequada a digestibilidade do produto, neste sentido soja micronizada e o farelo de glúten de milho 60% se destacam em digestibilidade e teor de energia metabolizável. A farinha de vísceras de frango, dentre as proteínas de origem animal secas demonstra-se como a de melhor digestibilidade e energia metabolizável.

Frankenstein, o prometeu moderno ciência, literatura e educação

À partir des études de l'anthropologue Bruno Latour, dans lesquelles on montre l'importance de la rhétorique et des stratégies institutionnelles dans la fabrication des vérités scientifiques; des hypothèses concernant la nature ambiguë des sciences dressées par Isabelle Stengers et des idées d'Edgar Morin sur la nécessité de combattre la pensée fragmenteuse et de relier culture scientifique et culture humanistique, la thèse aborde la relation de l'homme avec ses artefacts, le défi des descriptions des phénomènes et de leurs propriétés, du dialogue entre les humains et les plusieures dimensions de la matière, et de la responsabilité qui devrait venir avec tous les progrès scientifiques. Victor Frankenstein, sa créature, Brown-Séquard et la testostérone synthétique, sont des acteurs qui aident à composer le panorama cognitif de la recherche qui étend les limites de la science et du social au collectif de non-humains et revendique une réforme de la pensée et de l'éducation que les inclut

Estabilidade do antígeno de célula total de Brucella abortus para uso no diagnóstico sorológico da brucelose bovina pela reação de fixação de complemento

A reação de fixação de complemento é um dos testes usados no diagnóstico confirmatório da brucelose bovina, e para sua realização emprega-se o mesmo antígeno usado na prova de soroaglutinação lenta, porém não foi possível encontrar na literatura estudos sobre a estabilidade desse antígeno para uso na prova de fixação de complemento, de modo a estabelecer um prazo de validade para o mesmo. Por isso, esta investigação teve por objetivo avaliar a estabilidade do antígeno de célula total de Brucella conservado sob refrigeração, para uso na reação de fixação de complemento. Analisaram-se 14 partidas de antígeno, preparado com Brucella abortus amostra 1119/3 e padronizado para uso na prova de soroaglutinação lenta, com tempo de fabricação variando de 9 meses a 23 anos e 11 meses. Testaram-se 167 soros bovinos com títulos variáveis de anticorpos contra Brucella, adotando-se a técnica com incubação a 37ºC nas duas fases da reação e 5 unidades hemolíticas 50% de complemento. Considerou-se como positivo o soro com pelo menos 25% de fixação de complemento na diluição 1:4. Compararam-se os resultados obtidos com as 13 partidas de antígeno com aqueles obtidos com a partida com 9 meses de fabricação, usando o teste de chi2 de McNemar e o coeficiente kappa. A grande maioria dos soros apresentou resultados muito próximos quando testados com as diversas partidas de antígeno, e não se observou relação entre tempo de fabricação do antígeno e diferenças nos resultados obtidos.

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Inserção do Design em Micro e Pequenas Empresas: o caso de duas indústrias moveleiras no Estado do Rio Grande do Norte /

This work aims to promote design aspects into furniture Small and Medium Enterprises (SME s) at Rio Grande do Norte State. The final outcome will be an increasing on their competitiveness as well as consider design as key strategic aspect for their business. As a consequence, the results are based on two SME companies from the furniture sector located at Natal/RN. The study is based on a literature research followed by a management diagnosis for each company. The diagnosis was base don interviews with the entrepreneurs and their employees as well as meetings, participant observations and document analysis. Based on this analysis, specific aspects were implement in order to boost the production line as well as the product development process (PDP) and the development of a prototype. The results have indicated some limitation of these companies regarding their low technological on their production line, poor management and work skills as well as low perception of design as a competitive tool. Regardless these results, it was observed that design has brought an important contribution for cultural changes within companies as well as for the development of better quality and competitive products

A Produção mais Limpa como ferramenta em busca da sustentabilidade empresarial: um estudo de múltiplos casos em empresas do Estado do Rio Grande do Norte

This study aimed to assess the Cleaner Production CP as corporate sustainable tool, through the multiple case studies within companies from Rio Grande do Norte State. In order to achieve this goal a research methodology approach was set. The initial stage of the research methodology was based on a literature review on which it was observed that the CP can be linked with corporate sustainable once it prevents pollution and reduces the operational risks among employees, community and environment. In addition, CP can useful for companies position within competitive position as well as being applied to process, products and services. In order to observe these factors, CP was used within food industry (Company 1), textile industry (Company 2) and in a car dealer (Company 3). Regarding the results, Company 1 changed its raw material as well as implementing housekeeping (control use of water, energy and condensed milk). In Company 2, it was observed the three levels of CP. In other words, housekeeping (e.g. cutting process and manipulation of chemical products), changing technology (high pressure washing machine) and internal and external recycling. In addition, Company 3 considered only level 3 external recycling. As consequence, it was observed that can be applied either within industry as well as service sector. Unfortunately, it was not possible to observe any social gains on a monetary basis. This is due to limitations of the CP methodology and study complexity. Therefore, it was observed improvements regarding to social, environmental and economic areas. Nevertheless, it is necessary more commitment from top level management in order to consider CP like effective sustainable tool

Fatores que afetam a satisfação e a fidelidade do consumidor: um estudo com usuários de calçado esportivo (tênis), na Região Sul da cidade de Natal

This paper aims to investigate the factors that influence the satisfaction and fidelity of tennis´s users with the region southern city of Natal, capital of Rio Grande do Norte as the area of analyzing , using the national satisfaction index models as a tool to study. In this study was used the questionnaire as a tool for collecting data based on the new Norwegian customer satisfaction barometer model proposed by Johnson et. al. (2001). The data collection took place during the months of May and June 2008, when 450 tennis´s users were interviewed. The main results obtained by multiple regression analysis and logistic regression showed that the users' satisfaction with the tennis´s brand is influenced by the quality, comfort, material used in the manufacture and price, while fidelity is potentized by the image of the brand and the satisfaction degree with the user's tennis and with the brand of tennis. In relation to user satisfaction with the tennis, that satisfaction is influenced by the quality, comfort, weight and the material used, while fidelity is potentized by the satisfaction with the tennis´s brand, with the possibility of paying the same amount again and the emotional commitment. As the processing of claims there was no direct influence on satisfaction and consumers fidelity due to the low number complaints

Importância do gerenciamento com base em dados estudo de caso : farmácias de manipulação do Estado do Rio Grande do Norte

Last century Six Sigma Strategy has been the focus of study for many scientists, between the discoveries we have the importance of data process for the free of error product manufactory. So, this work focuses on data quality importance in an enterprise. For this, a descriptive-exploratory study of seventeen pharmacies of manipulations from Rio Grande do Norte was undertaken with the objective to be able to create a base structure model to classify enterprises according to their data bases. Therefore, statistical methods such as cluster and discriminant analyses were used applied to a questionnaire built for this specific study. Data collection identified four group showing strong and weak characteristics for each group and that are differentiated from each other

Uma avaliação comparativa de estratégias de arranjos físicos para estaleiros de construção de embarcações metálicas de pequeno porte

The present study aims to analyse, in different levels of demand, what is the best layout strategy to adopt for the small metallic shipbuilding. To achieve this purpose, three simulation models are developed for analyze these production strategies under the positional, cellular and linear layouts. By the use of a simulation tool for compare the scenarios, Chwif and Medina (2010) and Law (2009)´s methodologies were adapted that includes three phases: conception, implementation and analysis. In conception real systems were represented by process mapping according to time, material resources and human resources variables required for each step of the production process. All of this information has been transformed in the cost variable. Data were collected from three different production systems, two located in Natal RN with cellular and positional layouts and one located in Belém-PA with linear layout. In the implementation phase, the conceptual models were converted in computacional models through the tool Rockwell Software Arena ® 13.5 and then validated. In the analysis stage the production of 960 ships in a year vessels were simulated for each layout noting that, for a production of until 80 units positional layout is the most recommended, between 81 and 288 units the cellular layout and more than 289 units the linear layout

Analise SWOT do gerenciamento de resíduos do coco verde em duas agroindústrias do estado do Rio Grande do Norte

In the current conjuncture, the environmental factor has been changing the position of companies that are practicing or minimally adopting environmental management. Such tool has been used by companies to face the problems caused by solid waste, in particular green coconut waste, which is constantly among the material discarded by society (companies/ consumer). It is a typical tropical fruit whose fresh water is very benefic for human health, and its popularization has caused a progressive increase of its consumption. Following this stream of thought, this present work came up with an analysis of strengths, weaknesses, threats, and opportunities SWOT analysis on green coconut solid waste management at two agribusiness companies in the state of Rio Grande do Norte (RN), Brazil, aiming to know the challenges and the potentials of this kind of waste. According to the approach of the problem, this work fits a descriptive, exploratory, and qualitative research. The data collection was obtained by a questionnaire and a structured interview, in order to evaluate the strategic posture of agribusiness companies through SWOT analysis, which is an English acronym for Strengths, Weaknesses, Opportunities and Threats. The SWOT analysis is an effective tool to analyze the internal and external environment of an organization. This tool contributes to locate the company at the environment in question and when well applied it enables the detection of mistakes, the strengthening of correct procedures, the avoidance of threats, and the bet on opportunities. The studied agribusiness industries have very similar profiles, such as a long business life span, and a strategy that extends the useful life of the fruit, by using its waste for the manufacturing of new subproducts. In both, the daily quantity of waste resulted of this process reaches approximately 20 thousand units of the fruit in high season, being necessary a focus directed at use and/or treatment of these waste. Further to SWOT analysis, it was ascertained that the agribusiness company A works through a defensive marketing strategy and acts vulnerably, in other words, unable of acting before this market segment, for it has decided to stop using the waste due to a lack of equipment and technology. On the other hand, the agribusiness company B has incorporated an offensive marketing strategy because even not possessing equipments, technology, and appropriated internal installations, it still insists on use and benefits of green coconut waste in its agribusiness. Thus, it is considered that the potential of green coconut waste management for the production of several subproducts reduces the impacts produced by inappropriate placement and generates profits in a short, medium and long term. Such profits being tangible and intangible, as the interest for sustainability actions is not only a matter of obtaining return on capital, but it is an important question in order to move on into business, since it is not enough to have quality on products and process nowadays. It is necessary to establish socio-environmental practices aiming the image of the company as the prevailing role on consumers buying decision

Valores econômicos para as características de produção de leite de búfalas no Estado de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)