Germanium content in marine sediments

In the geosphere, germanium (Ge) has a chemical behavior close to that of silicon (Si), and Ge commonly substitutes for Si (in small proportions) in silicates. Studying the evolution of the respective proportions of Ge and Si through time allows us to better constrain the global Si cycle. The marine inventory of Ge present as dissolved germanic acid is facing two main sinks known through the study of present sediments: 1) incorporation into diatom frustules and transfer to sediments by these "shuttles", 2) capture of Ge released to pore water through frustule dissolution by authigenic mineral phases forming within reducing sediments. Our goals are to determine whether such a bio-induced transfer of Ge is also achieved by radiolarian and whether Ge could be trapped directly from seawater into authigenic phases with no intervention of opal-secreting organisms (shuttles). To this end, we studied two Paleozoic radiolarite formations and geological formations dated of Devonian, Jurassic and Cretaceous, deposited under more or less drastic redox conditions. Our results show that the Ge/Si values observed for these radiolarites are close to (slightly above) those measured from modern diatoms and sponges. In addition, our results confirm what is observed with some present-day reducing sediments: the ancient sediments that underwent reducing depositional conditions are authigenically enriched in Ge. Furthermore, it is probable that at least a part of the authigenic Ge came directly from seawater. The recurrence and extent (through time and space) of anoxic conditions affecting sea bottoms have been quite important through the geological times; consequently, the capture of Ge by reducing sediments must have impacted Ge distribution and in turn, the evolution of the seawater Ge/Si ratio.

Structural evolution of the Lesser Himalayan fold-thrust belt of west central Nepal

The Lesser Himalayan fold-thrust belt on the south flank of the Jajarkot klippe in west central Nepal was mapped in detail between the Main Central thrust in the north and the Main Boundary thrust in the south. South of the Jajarkot klippe, the fold-thrust belt involves sandstone, shale and carbonate rocks that are unmetamorphosed in the foreland and increase in metamorphic grade with higher structural position to sub-greenschist facies towards the hinterland. The exposed stratigraphy is correlative with the Proterozoic Ranimata, Sangram, Galyang, Syangia Formations and Lakharpata Group of Western Nepal and overlain by the Paleozoic Tansen and Kali Gandaki Groups. Based on field mapping and cross-section construction, three distinct thrust sheets were identified separated by top-to-the-south thrust faults. From the foreland (south) to the hinterland (north), the first thrust sheet in the immediate hanging wall of the Main Boundary thrust defines an open syncline. The second thrust sheet contains a very broad synformal duplex, which is structurally stacked against the third thrust sheet containing a homoclinal panel of the oldest exposed Proterozoic stratigraphy. Outcrop scale folds throughout the study area are predominantly south vergent, open, and asymmetric reflecting the larger regional scale folding style, which corroborate the top-to-the-south deformation style seen in the faults of the region. Field techniques were complemented with microstructural and quartz crystallographic c-axis preferred orientation analyses using a petrographic microscope and a fabric analyzer, respectively. Microstructural analysis identified abundant strain-induced recrystallization textures and occasional occurrences of top-to-the-south shear-sense indicators primarily in the hinterland rocks in the immediate footwall of the Main Central Thrust. Top-to-the-south shearing is also supported by quartz crystallographic c-axis preferred orientations. Quartz recrystallization textures indicate an increase in deformation temperature towards the Main Central thrust. A line balance estimate indicates that approximately 15 km of crustal shortening was accommodated by folding and faulting in the fold-thrust belt south of the Jajarkot klippe. Additionally, estimations of shortening velocity suggest that the shortening velocity operating in this section of the fold-thrust belt between 23 to 14 Ma was slower than what is currently observed as a result of the ongoing deformation of the Sub-Himalayan fold-thrust belt.

Revisiting the Late Jurassic-Early Cretaceous of the NW South Iberian Basin: new ages and sedimentary environments

The study of the Upper Jurassic-Lower Cretaceous deposits (Higueruelas, Villar del Arzobispo and Aldea de Cortés Formations) of the South Iberian Basin (NW Valencia, Spain) reveals new stratigraphic and sedimentological data, which have significant implications on the stratigraphic framework, depositional environments and age of these units. The Higueruelas Fm was deposited in a mid-inner carbonate platform where oncolitic bars migrated by the action of storms and where oncoid production progressively decreased towards the uppermost part of the unit. The overlying Villar del Arzobispo Fm has been traditionally interpreted as an inner platform-lagoon evolving into a tidal-flat. Here it is interpreted as an inner-carbonate platform affected by storms, where oolitic shoals protected a lagoon, which had siliciclastic inputs from the continent. The Aldea de Cortés Fm has been previously interpreted as a lagoon surrounded by tidal-flats and fluvial-deltaic plains. Here it is reinterpreted as a coastal wetland where siliciclastic muddy deposits interacted with shallow fresh to marine water bodies, aeolian dunes and continental siliciclastic inputs. The contact between the Higueruelas and Villar del Arzobispo Fms, classically defined as gradual, is also interpreted here as rapid. More importantly, the contact between the Villar del Arzobispo and Aldea de Cortés Fms, previously considered as unconformable, is here interpreted as gradual. The presence of Alveosepta in the Villar del Arzobispo Fm suggests that at least part of this unit is Kimmeridgian, unlike the previously assigned Late Tithonian-Middle Berriasian age. Consequently, the underlying Higueruelas Fm, previously considered Tithonian, should not be younger than Kimmeridgian. Accordingly, sedimentation of the Aldea de Cortés Fm, previously considered Valangian-Hauterivian, probably started during the Tithonian and it may be considered part of the regressive trend of the Late Jurassic-Early Cretaceous cycle. This is consistent with the dinosaur faunas, typically Jurassic, described in the Villar del Arzobispo and Aldea de Cortés Fms.

Systematic review of Late Jurassic sauropods from the Museu Geológico collections (Lisboa, Portugal)

The Museu Geológico collections house some of the first sauropod references of the Lusitanian Basin Upper Jurassic record, including the Lourinhasaurus alenquerensis and Lusotitan atalaiensis lectotypes, previously considered as new species of the Apatosaurus and Brachiosaurus genera, respectively. Several fragmentary specimens have been classical referred to those taxa, but the most part of these systematic attributions are not supported herein, excluding a caudal vertebra from Maceira (MG 8804) considered as cf. Lusotitan atalaiensis. From the material housed in the Museu Geológico were identified basal eusauropods (indeterminate eusauropods and turiasaurs) and neosauropods (indeterminate neosauropods, diplodods and camarasaurids and basal titanosauriforms). Middle caudal vertebrae with lateral fossae, ventral hollow border by pronounced ventrolateral crests and quadrangular cross-section suggest for the presence of diplodocine diplodocids in north area of the Lusitanian Basin Central Sector during the Late Jurassic. A humerus collected from Praia dos Frades (MG 4976) is attributed to cf. Duriatitan humerocristatus suggesting the presence of shared sauropod forms between the Portugal and United Kingdom during the Late Jurassic. Duriatitan is an indeterminate member of Eusauropoda and the discovery of new material in both territories is necessary to confirm this systematic approach. The studied material is in according with the previous recorded paleobiodiversity for the sauropod clade during the Portuguese Late Jurassic, which includes basal eusauropods (including turiasaurs), diplodocids and macronarians (including camarasaurids and basal titanosauriforms).

Estimation of the Crustal Bulk Properties Beneath Mainland Portugal from P-Wave Teleseismic Receiver Functions

In this work, we present results from teleseismic P-wave receiver functions (PRFs) obtained in Portugal, Western Iberia. A dense seismic station deployment conducted between 2010 and 2012, in the scope of the WILAS project and covering the entire country, allowed the most spatially extensive probing on the bulk crustal seismic properties of Portugal up to date. The application of the H-kappa stacking algorithm to the PRFs enabled us to estimate the crustal thickness (H) and the average crustal ratio of the P- and S-waves velocities V (p)/V (s) (kappa) for the region. Observations of Moho conversions indicate that this interface is relatively smooth with the crustal thickness ranging between 24 and 34 km, with an average of 30 km. The highest V (p)/V (s) values are found on the Mesozoic-Cenozoic crust beneath the western and southern coastal domain of Portugal, whereas the lowest values correspond to Palaeozoic crust underlying the remaining part of the subject area. An average V (p)/V (s) is found to be 1.72, ranging 1.63-1.86 across the study area, indicating a predominantly felsic composition. Overall, we systematically observe a decrease of V (p)/V (s) with increasing crustal thickness. Taken as a whole, our results indicate a clear distinction between the geological zones of the Variscan Iberian Massif in Portugal, the overall shape of the anomalies conditioned by the shape of the Ibero-Armorican Arc, and associated Late Paleozoic suture zones, and the Meso-Cenozoic basin associated with Atlantic rifting stages. Thickened crust (30-34 km) across the studied region may be inherited from continental collision during the Paleozoic Variscan orogeny. An anomalous crustal thinning to around 28 km is observed beneath the central part of the Central Iberian Zone and the eastern part of South Portuguese Zone.

Gewebeansatz-Strukturen auf pyritisierten Steinkernen von Ammonoideen

3400 pyritized internal moulds of Upper Devonian, Triassic, Jurassic and Lower Cretaceous ammonoids show various soft tissue attachment structures. They are preserved as regularly distributed black patterns on the moulds. All structures can be interpreted as attachment areas of muscles, ligaments and intracameral membranes. Paired structures are developed along the umbilicus and on the flanks of the moulds, unpaired ones appear on the middle of their dorsal and ventral sides. Strong lateral muscles cause paired twin lines on the flanks of the phragmocone and of the body chamber. A ventral muscle is deduced from small rounded or crescent shaped spots in front of each septum on the ventral side. These spots are often connected, forming a band-like structure. Broad dark external bands on the ventral side of the phragmocone, ventral preseptal areas in the posterior part of the living chamber, small twin lines or oval shaped areas on the ventral side of the living chamber represent paired or unpaired attachment areas of the hyponome muscle. A middorsal muscle is documented by small roughened areas in front of each dorsal lobe. Dark spots along the umbilicus, often connected and thus forming a band-like structure (tracking band), are remains of a pair of small dorsolateral muscles at the posterior end of the soft body. Dark bands, lines and rows of small crescent shaped structures behind the tips of sutural lobes are due to spotlike fixation places of the posterior part of the mantle and their translocation before subsequent septal secretion. Devonian goniatites had a paired system of lateral and ventrolateral muscles preserved on the moulds as black or incised lines on the flanks of the living chamber and as dark preseptal areas, ventrally indented. These structures represent the attachment areas of paired lateral cephalic and paired ventral hyponome retractors. Fine black lines on the phragmocone situated parallel to the sutures (pseudosutures) represent a rhythmical secretion of camera! membranes during softbody translocation. Goniatites had a paired system of lateral and ventrolateral muscles, whilst Neoammonoids have a paired lateral and dorsolateral system, and, additionally, an unpaired system on the ventral and on the dorsal side. Mesoammonoids show only a paired lateral and an unpaired dorsal one. Fine black lines situated parallel to the saddles and behind the lobes of the suture line can be interpreted as structures left during softbody translocation and a temporary attachment of rhythmical secreted cameral membranes. Cameral membranes had supported the efficiency of the phragmocone. Only some of the observed structures are also present in recent Nautilus. Differences in the form and position of attachment sites between ammonoids and recent Nautilus indicate different soft body organizations between ammonoids and nautiloids. The attachment structures of goniatites especially of tornoceratids can be compared with those of Nautilus which indicates Richter - Gewebeansatz-Strukturen bei Ammonoideen 3 a comparable mode of life. Differences in the form and position of attachment structures between goniatites and ammonites may indicate an increasing differentiation of the muscular system in the phylogeny of this group. Different soft body organization may depend on shell morphology and on a different mode of life. On the modification or reduction of distinct muscle systems ammonoids can be assigned to different ecotypes. Based on shell morphology and the attachment areas of cephalic and hyponome retractor muscles two groups can be subdivided: - Depressed, evolute morphotypes with longidome body-chambers show only small ventral hyponome retractor muscles. Lateral cephalic retractors are not developed. These morphotypes are adapted to a demersal mode of life. Without strong cephalic retractor muscles no efficient jet propulsion can be produced. These groups represent vertical migrants with efficient phragmocone properties (multilobate sutures, cameral membranes, narrow septal spacing). - Compressed, involute moiphotypes with brevidome body-chambers show strong cephalic and hyponome retractor muscles and represent a group of active swimmers. These morphotypes were able to live at different depths, in the free water column or/and near the seafloor. They are not confined only to one habitat. Most of the examined genera and species belong to this group. Changes of the attachment structures in the course of ontogeny confirm that juveniles of Amaltheus and Quenstedtoceras lived as passive planche drifters in upper and intermediate parts of the free water column after hatching. At the end of the juvenile stage with a shell diameter of 0,3 - 0,5 cm cephalic retractor muscles developed. With the beginning of an active swimming mode of life (neanic stage) the subadult animals left the free water column and moved into shallow water habitats. Fuciniceras showed no marked changes in the attachment structures during ontogeny. This indicates that there occur no differences in the mode of life between juvenile and adult growth stages. Based on attachment structures and shell morphology of Devonian goniatites their relation to the systematic position permits statements about probable phylogenetic relationships between the Cheiloceratidae and Tornoceratidae. In some cases attachment structures of ammonites permit statements about phylogenetic relationships on family and genus level.

Der Kauffunger Kalkstein (Bober-Katzbach Gebirge, Polen): Petrographie, Fossilinventar, Stratigraphie

In the Western Sudetes (Mts.) in SW Poland carbonate rocks occur which are well known in the older German literature as ’’Kauffung Limestone” or ’’Wojcieszow Limestone” in recent publications, respectively. They are intercalated in sedimentary (shales) and volcanic (greenstone) successions and are, presumed - due to the lack of index fossils - to be Cambrian in age. These deposits occur in a variety of isolated massifs in the Bober-Katzbach Mts. where they have been mined in many quarries in the past. In a single location (Polom quarry near Wojcieszow) they are exploited up until today. The predominantly calcitic rocks display a wide variety of different lithologies and are, consequently, subdivided into the following lithological units which differ in textural characteristics, mineral constituents, and different grades of diagenetic and metamorphic alteration: 1. Calcite Marble: massive, calcitic, chiefly metamorphic recrystallized. 2. Zebra Limestone: dolomitic-calcitic, certain content of metasomatic silica, fine bedding as a result of microbial calcite precipitation or of diagenetic to metamorphic separation of carbonate and silica constituents. 3. Massive matrix Dolomite: compact, of diagenetic to metamorphic origin. 4. Dolomite Marble: metamorphic. 5. Hydrothermal Dolomite: hydrothermal alteration of limestone, postdating the tectonic deformation. The recent appearance of ’’Kauffung Limestone” is mainly a result of regional metamorphosis at low temperature up to about 300°C and locally high pressure. The typical textural features are stress induced, mostly protomylonitic calcite recrystallisation and generally slowly or not infected dolomite crystals. The different reactions of the two carbonate phases are attributed to their mineral properties. Rhyolitic and dacitic dykes penetrating the carbonate rocks are interpreted as a result of post- orogenic, probably Carboniferous or Permian volcanism. Microprobe investigation on the carbonates revealed a stochiometric composition of dolomite and calcite. The stable isotope content (8 c 0,8* ^C) reflects increased crystallisation temperature of the carbonate minerals (8 O von -7,75 bis -15,78). A variety of fossil remains have been extracted from bulk samples, consisting of sponge needles, floral components, foramini- fera, and vertebrate remains the latter two of which indicate a depositional age younger than Ordovician. Due to the stratigraphic re-attribution of the Kauffung Limestone, the hypothesis of a Cambrian/Ordovician rifting in the Western Sudetes should be abandoned.

Stratigraphic micropalaeontology of the Upper Jurassic Neritic formations of Portugal and its Tethyan context. I - The Algarve Basin

Publicações inserida na colecção Memórias Geológicas, nº 35

As coleções de braquiópodes paleozóicos do Museu Geológico do Laboratório Nacional de Energia e Geologia, Lisboa, Portugal

As coleções de braquiópodes do Museu Geológico de Lisboa são aqui analisadas quanto à proveniência do material, sua posição estratigráfica e quantidade. Correspondem a 5 coleções distintas, aqui comparadas em termos de quantidades de lotes e de géneros neles incluídos. Salvo algumas exceções, todos os braquiópodes destas coleções são de idade devónica. A Coleção de Braquiópodes Paleozoicos portuguesa foi fundamentalmente recolhida por Nery Delgado e provém de 7 distritos, sendo maioritariamente oriunda dos distritos de Portalegre, Porto e Santarém. As outras 4 coleções contendo braquiópodes são provenientes do estrangeiro e têm diferentes origens. É, igualmente, apresentada uma pequena síntese sobre a história de cada coleção, e discutido o seu valor estratigráfico e a sua importância para a correlação de unidades estratigráficas aflorantes em Portugal e no estrangeiro. Fornece-se, ainda, uma lista dos géneros de braquiópodes nelas representados.

Tectonoestratigrafia do Terreno Ibérico no sector Tomar- Sardoal-Ferreira do Zêzere e relações com o Terreno Finisterra

A cartografia geológica da região Tomar-Sardoal-Ferreira do Zêzere permitiu individualizar sucessões tectono-estratigráficas em domíníos da Zona Centro-Ibérica (ZCI) e da Zona Ossa Morena (ZOM) que anteriormente eram considerados apenas como ZOM, separadas entre si pelo carreamento de Ortiga-Torrão. A sucessão centro-ibérica monometamórfica, datada do Neoproterozóico ao Silúrico (?), encontra-se numa estrutura triangular e é constituída por unidades típicas do Paleozóico/Neoproterozóico da ZCI. Na ZOM foram estabelecidas duas sucessões polimetamórficas nas regiões do Sardoal e de Serra (Tomar), ambas datadas no geral do Neoproterozóico. A primeira constitui um autóctone relativo e a outra, alóctone; ambas são compostas por unidades deformadas da crosta cadomiana. A continuidade das sucessões tectono-estratigráficas antecedentes do Terreno Ibérico e do carreamento que as limita é interrompida a E pela Zona de Cisalhamento Porto-Tomar-Ferreira do Alentejo (N-S e cinemática direita), a ocidente da qual se encontra o Terreno Finisterra.

Contribuição para o conhecimento da geologia do Grupo das Beiras (CXG) na região do Caramulo-Buçaco, Portugal Central

O presente trabalho ocupa-se do estudo do Complexo Xisto-Grauváquico ante-ordovícico (Grupo das Beiras) na região do Caramulo-Buçaco (centro de Portugal). Em termos geológicos, a área estudada pertence à Zona Centro Ibérica e encontra-se limitada a N pelo granito do Caramulo, a S pela bacia meso-cenozóica de Arganil, a W pelo sinclinal paleozóico do Buçaco e pela bacia meso-cenozóica ocidental portuguesa e a E pelo sinclinal paleozóico de Arganil e pelo plutonito granítico de Tábua-Santa Comba Dão; no seio da área estudada encontra-se a bacia meso-cenozóica de Mortágua. Com base nas características litológicas e estruturais distinguem-se no Complexo Xisto Grauváquico 4 grandes conjuntos litológicos concordantes entre si, designados de Unidades I, II, III e IV, que se desenvolvem da base para o topo de N para S. A Unidade I situa-se a N da região. O seu limite inferior é desconhecido, e o superior posiciona-se no último conjunto arenoso com potência decamétrica. É constituída por xistos cinzentos e negros com intercalações de arenitos de espessura não superior a 100 metros e de extensão lateral quilométrica. Apresenta uma espessura mínima de 1000 m. A Unidade II apresenta consideravelmente menor proporção de material arenoso intercalado entre os pelitos comparativamente à unidade inferior. É caracterizada por apresentar um predomínio de material silto-argiloso e escassos níveis arenosos com potência não superior à dezena de metros e escassa continuidade lateral. Cartograficamente esta unidade constitui uma franja alargada de orientação próxima a E-W. Apresenta uma espessura aproximada de 1500 m. A Unidade III é caracterizada pela presença de conjuntos arenosos com extensão lateral quilométrica e espessura de várias dezenas de metros, separados por material silto-argiloso. Os limites inferior e superior estão situados respectivamente abaixo e acima dos principais conjuntos arenosos. Esta unidade apresenta uma espessura máxima estimada na ordem dos 2000 m. A Unidade IV, que é a unidade superior, apresenta um predomínio pelítico, com escassas intercalações de conjuntos arenosos. O seu limite inferior encontra-se no topo do último conjunto arenoso da Unidade III. Apresenta uma espessura mínima de 500 m. As características sedimentológicas das 4 unidades indicam uma sedimentação num ambiente de plataforma externa siliciclástica aberta, com a construção de barras e por vezes sujeita à acção de tempestades, com sucessivos períodos de superficialização e profundização numa bacia de sedimentação bastante subsidente. Em termos estruturais, para além duma deformação pré-ordovícica, que é comprovada pelo forte mergulho e dispersão da orientação dos eixos da 1ª fase varisca e da lineação de intersecção L1, a área estudada foi principalmente afectada pela Orogenia Varisca. A 1ª fase de deformação varisca (F1) gerou dobras com superfícies axiais e xistosidade associada (S1) de direcção WNW-ESE, e forte pendor para NNE. Estas dobras D1 apresentam comprimentos de onda que nunca chegam a ser quilométricos, desenvolvendo-se um grande flanco inverso denunciando a presença de uma antiforma para NNE e uma sinforma para SSW. A 2ª fase de deformação varisca (F2) actuou na parte nordeste da área estudada e é caracterizada por ter gerado dobras de comprimento de onda quilométrico, com planos axiais e xistosidade associada S2 de direcção NW-SE, subverticais ou a pender fortemente para NE. Embora com alguma dispersão, as lineações de intersecção L2 e os eixos das dobras D2 apresentam maioritariamente forte pendor para E. A direcção e tipos de estruturas da F2 sugerem uma correlação com a terceira fase definida em vários pontos da Zona Centro Ibérica e estreitamente relacionada com as intrusões graníticas. Do ponto de vista petrológico, distinguem-se várias rochas sedimentares (pelitos e arenitos) todas elas sujeitas a metamorfismo que não ultrapassa a fácies dos xistos verdes. Dentro das rochas sedimentares mais grosseiras, há a destacar a presença de arenitos vulcânicos cuja composição denuncia, não muito afastados da bacia sedimentar, a presença de aparelhos vulcânicos que estariam em actividade durante a sedimentação. Foram analisadas isotopicamente 27 amostras de metapelitos colhidas em 5 locais diferentes de forma a abranger quase toda a área estudada. Os dados isotópicos de quatro destes locais de amostragem forneceram isócronas Rb-Sr, em rocha total, com valores da ordem dos 400-440 Ma. O granito do Caramulo, datado pela isócrona Rb-Sr em amostras de rocha total, forneceu uma idade de 326±12Ma. As idades modelo Sm-Nd (manto empobrecido) de 5 amostras de metapelitos estão compreendidas entre 1.35 e 1.25 Ga. Este período de tempo pode ser considerado como correspondendo à época de diferenciação mantélica da crusta que deu lugar à maioria das áreas fonte dos metapelitos.

U-Pb geochronology and Nd isotope contributions to the interpretation of a peculiar ring massif: the Santa Eulália plutonic complex (SW Iberia, Portugal)

The Santa Eulalia plutonic complex (SEPC) is a late-Variscan granitic body placed in the Ossa-Morena Zone. The host rocks of the complex belong to metamorphic formations from Proterozoic to Lower Paleozoic. The SEPC is a ring massif (ca. 400 km2 area) composed by two main granitic facies with different colours and textures. From the rim to the core, there is (i) a peripheral pink medium- to coarse-grained granite (G0 group) involving large elongated masses of mafic and intermediate rocks, from gabbros to granodiorites (M group), and (ii) a central gray medium-grained granite (G1 group). The mafic to intermediate rocks (M group) are metaluminous and show wide compositions: 3.34–13.51 wt% MgO; 0.70–7.20 ppm Th; 0.84–1.06 (Eu/Eu*)N (Eu* calculated between Sm and Tb); 0.23–0.97 (Nb/Nb*)N (Nb* calculated between Th and La). Although involving the M-type bodies and forming the outer ring, the G0 granites are the most differentiated magmatic rocks of the SEPC, with a transitional character between metaluminous and peraluminous: 0.00–0.62 wt% MgO; 15.00–56.00 ppm Th; and 0.19–0.42 (Eu/Eu*)N ; 0.08–0.19 (Nb/Nb*)N [1][2]. The G1 group is composed by monzonitic granites with a dominant peraluminous character and represents the most homogeneous compositional group of the SEPC: 0.65–1.02 wt% MgO; 13.00–16.95 ppm Th; 0.57–0.70 (Eu/Eu*)N ; 0.14–0.16 (Nb/Nb*)N . According to the SiO2 vs. (Na2O+K2O–CaO) relationships, the M and G1 groups predominantly fall in the calc-alkaline field, while the G0 group is essencially alkali-calcic; on the basis of the SiO2 vs. FeOt/(FeOt+MgO) correlation, SEPC should be considered as a magnesian plutonic association [3]. New geochronological data (U-Pb on zircons) slightly correct the age of the SEPC, previously obtained by other methods (290 Ma, [4]). They provide ages of 306  2 Ma for the M group, 305  6 Ma for the G1 group, and 301  4 Ma for the G0 group, which confirm the late-Variscan character of the SEPC, indicating however a faintly older emplacement, during the Upper Carboniferous. Recent whole-rock isotopic data show that the Rb-Sr system suffered significant post-magmatic disturbance, but reveal a consistent set of Sm-Nd results valuable in the approach to the magmatic sources of this massif: M group (2.9 < Ndi < +1.8); G1 group (5.8 < Ndi < 4.6); G0 group (2.2 < Ndi < 0.8). These geochemical data suggest a petrogenetic model for the SEPC explained by a magmatic event developed in two stages. Initially, magmas derived from long-term depleted mantle sources (Ndi < +1.8 in M group) were extracted to the crust promoting its partial melting and extensive mixing and/or AFC magmatic evolution, thereby generating the G1 granites (Ndi < 4.6). Subsequently, a later extraction of similar primary magmas in the same place or nearby, could have caused partial melting of some intermediate facies (e.g. diorites) of the M group, followed by magmatic differentiation processes, mainly fractional crystallization, able to produce residual liquids compositionally close to the G0 granites (Ndi < 0.8). The kinetic energy associated with the structurally controlled (cauldron subsidence type?) motion of the G0 liquids to the periphery, would have been strong enough to drag up M group blocks as those occurring inside the G0 granitic ring.

Environmental and economic impacts of sea-level rise on the Basque Coast

257 p.